All MIBs › RAPID-CITY › rcChasNewEMMode
rcChasNewEMMode
Module: RAPID-CITY
OID (symbolic): RAPID-CITY::rcChasNewEMMode
OID (numeric): 1.3.6.1.4.1.2272.1.4.22
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description:
This configuration is for enabling/disabling 128K mode. The change will take effect upon reboot.
What is rcChasNewEMMode?
This object controls whether the chassis should operate in 128K mode, a special bandwidth configuration that takes effect only after the system reboots. Setting this to enable activates higher capacity mode for bandwidth-intensive deployments. System administrators use this to configure the chassis for maximum throughput when required, planning for a reboot window to apply the change.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.4.22 snmpwalk -v2c -c public <target> RAPID-CITY::rcChasNewEMMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.4.22.1 snmpget -v2c -c public <target> RAPID-CITY::rcChasNewEMMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.4.22.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.4 | rcChassis | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.4.22 | rcChasNewEMMode | RAPID-CITY |