Description: The RowStatus variable should be used in accordance to installation and removal conventions for conceptual rows. When `rcVrrpTmpOperationsRowStatus' is set to active(1), no other objects in the conceptual row can be modified. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `rcVrrpTmpOperationsRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of rcVrrpTmpOperationsInetAddrType, rcVrrpTmpOperationsVrId and rcVrrpTmpOperationsPrimaryIpAddr has been set and there is at least one active row in the `rcVrrpTmpAssociatedIpAddrTable' defining an associated IP address. notInService(2) should be used to administratively bring the row down.

A typical order of operation to add a row is: 1. Create a row in rcVrrpTmpOperationsTable with createAndWait(5). 2. Create one or more corresponding rows in rcVrrpTmpAssociatedIpAddrTable. 3. Populate the rcVrrpTmpOperationsEntry. 4. set rcVrrpTmpOperationsRowStatus to active(1).

A typical order of operation to delete an entry is: 1. Set rcVrrpTmpOperationsRowStatus to notInService(2). 2. Set the corresponding rows in rcVrrpTmpAssociatedIpAddrTable to destroy(6) to delete the entry. 3. set rcVrrpTmpOperationsRowStatus to destroy(6) to delete the entry.