All MIBs › RAPID-CITY-VSP › rcSysVirtualIpAddr
rcSysVirtualIpAddr
Module: RAPID-CITY-VSP
OID (symbolic): RAPID-CITY-VSP::rcSysVirtualIpAddr
OID (numeric): 1.3.6.1.4.1.2272.1.1.51
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: Virtual IP is an IP address that owned and advertised only by the master CPU. So whichever CPU is master registers this IP address. Unlike the management IP address, this address goes in the switch config file and not the boot config
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.1.51 snmpwalk -v2c -c public <target> RAPID-CITY-VSP::rcSysVirtualIpAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.1.51.1 snmpget -v2c -c public <target> RAPID-CITY-VSP::rcSysVirtualIpAddr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.1.51.1 a <value>
Start monitoring Nortel/Bay Networks Accelar switch-router, Nortel Passport/Ethernet Routing Switch chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAPID-CITY-VSP::rcSysVirtualIpAddr OID value, configure state conditions and alerts, and monitor any Nortel/Bay Networks Accelar switch-router, Nortel Passport/Ethernet Routing Switch chassis from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.1 | rcSystem | RAPID-CITY |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2272.1.1.51 | rcSysVirtualIpAddr | RAPID-CITY-VSP |