All MIBs › RADWARE-MIB › rsRip2IfConfAutoSend
rsRip2IfConfAutoSend
Module: RADWARE-MIB
OID (symbolic): RADWARE-MIB::rsRip2IfConfAutoSend
OID (numeric): 1.3.6.1.4.1.89.26.3.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This variable controls RIP automatic send behavior. If enabled and no routers were heard on the interface, RIP will only send default route with high metric. Otherwise RIP will send updates according to configuration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.89.26.3.1.1.3 snmpwalk -v2c -c public <target> RADWARE-MIB::rsRip2IfConfAutoSend
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.89.26.3.1.1.3.1 snmpget -v2c -c public <target> RADWARE-MIB::rsRip2IfConfAutoSend.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.89.26.3.1.1.3.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.89 | rnd | Dell-MIB |
| 1.3.6.1.4.1.89.26 | ipSpec | Dell-MIB |
| 1.3.6.1.4.1.89.26.3 | rip2Spec | RADLAN-IP |
| 1.3.6.1.4.1.89.26.3.1 | rsRip2IfConfTable | RADLAN-IpRouter |
| 1.3.6.1.4.1.89.26.3.1.1 | rsRip2IfConfEntry | RADLAN-IpRouter |
| 1.3.6.1.4.1.89.26.3.1.1.3 | rsRip2IfConfAutoSend | RADWARE-MIB |