All MIBs › RADWARE-MIB › rsPhysPortMirrorBackupStatus
rsPhysPortMirrorBackupStatus
Module: RADWARE-MIB
OID (symbolic): RADWARE-MIB::rsPhysPortMirrorBackupStatus
OID (numeric): 1.3.6.1.4.1.89.35.1.74.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description:
The status of the backup-port according to the health check: Active - the port is ok and can be used as a destination port for copy-port PortDown - the port has been recognized as physically DOWN and therefore the traffic will not be copied to this port until it will be recognized as physically UP CheckIDSFail - the connectivty check of the monitoring port of the IDS failed and therefore the traffic will not be copied to this port until the check will recognize differently CheckIDSFailAnd PortDown - both the connectivty check on the IDS failed and the port has been recognized as physically DOWN None - for the case there is no defined backup port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.89.35.1.74.1.8 snmpwalk -v2c -c public <target> RADWARE-MIB::rsPhysPortMirrorBackupStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.89.35.1.74.1.8.1 snmpget -v2c -c public <target> RADWARE-MIB::rsPhysPortMirrorBackupStatus.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.89 | rnd | Dell-MIB |
| 1.3.6.1.4.1.89.35 | rndApplications | Dell-MIB |
| 1.3.6.1.4.1.89.35.1 | rsServerDispatcher | RADWARE-MIB |
| 1.3.6.1.4.1.89.35.1.74 | rsPhysPortMirrorTable | RADWARE-MIB |
| 1.3.6.1.4.1.89.35.1.74.1 | rsPhysPortMirrorEntry | RADWARE-MIB |
| 1.3.6.1.4.1.89.35.1.74.1.8 | rsPhysPortMirrorBackupStatus | RADWARE-MIB |