All MIBs › RAD-MIB › radBridgeCODOriginateDisConnectCondition
radBridgeCODOriginateDisConnectCondition
Module: RAD-MIB
OID (symbolic): RAD-MIB::radBridgeCODOriginateDisConnectCondition
OID (numeric): 1.3.6.1.4.1.164.4.1.4.4.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This condition allows the user to specify the condition under which the link is disconnected. The options are: noStationOnLan - When there is no station on lan. Counts 15 minutes from the point the last frame from lan has been received. If no frame have been transmitted on lan by the end of this period, disconnect the connection. onTraffic - On traffic. The user can specify the condition/s for disconnection. The disconnection will be defined in CODSpecificOnTrafficConditionOID . onDelayFromConnectionOnRequest - On Delay From Connection On Request . The delay time period will be defined in CODOriginateDisConnectDelay . onManualDisConnect - depends on radBridgeCODManualConnect OBJECT-TYPE (=disconnect).
What is radBridgeCODOriginateDisConnectCondition?
This object controls when a connection originating from a RAD device should automatically disconnect in a Call-On-Demand (COD) setup. Operators can select from conditions like no station activity on LAN for 15 minutes, or disconnection only on manual command. WAN administrators use this to optimize bandwidth costs by automatically tearing down expensive dial-up or leased-line connections when they are no longer needed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.4.1.4.4.1.3 snmpwalk -v2c -c public <target> RAD-MIB::radBridgeCODOriginateDisConnectCondition
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.4.1.4.4.1.3.1 snmpget -v2c -c public <target> RAD-MIB::radBridgeCODOriginateDisConnectCondition.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.4.1.4.4.1.3.1 i <value>
Start monitoring RAD Data Communications access/transmission/multiplexer equipment, entire product line (base enterprise MIB) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAD-MIB::radBridgeCODOriginateDisConnectCondition OID value, configure state conditions and alerts, and monitor any RAD Data Communications access/transmission/multiplexer equipment, entire product line (base enterprise MIB) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.4 | radBridges | DACS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.164.4.1 | genBridge | RAD-MIB |
| 1.3.6.1.4.1.164.4.1.4 | radBridgeCOD | RAD-MIB |
| 1.3.6.1.4.1.164.4.1.4.4 | radBridgeCODCondTable | RAD-MIB |
| 1.3.6.1.4.1.164.4.1.4.4.1 | radBridgeCODCondEntry | RAD-MIB |
| 1.3.6.1.4.1.164.4.1.4.4.1.3 | radBridgeCODOriginateDisConnectCondition | RAD-MIB |