All MIBs › RAD-MIB › prtTestVctCmd
prtTestVctCmd
Module: RAD-MIB
OID (symbolic): RAD-MIB::prtTestVctCmd
OID (numeric): 1.3.6.1.4.1.164.6.2.15.4.1.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Vct command. on (3) = Start Vct on both cables connected to RX and TX connectors of this port. Agent will perform the required command and change automatically the value of this object to off(2).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.6.2.15.4.1.1.10 snmpwalk -v2c -c public <target> RAD-MIB::prtTestVctCmd
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.6.2.15.4.1.1.10.1 snmpget -v2c -c public <target> RAD-MIB::prtTestVctCmd.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.6.2.15.4.1.1.10.1 i <value>
Start monitoring RAD Data Communications access/transmission/multiplexer equipment, entire product line (base enterprise MIB) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAD-MIB::prtTestVctCmd OID value, configure state conditions and alerts, and monitor any RAD Data Communications access/transmission/multiplexer equipment, entire product line (base enterprise MIB) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.6 | radGen | DACS-MIB |
| 1.3.6.1.4.1.164.6.2 | agnt | DACS-MIB |
| 1.3.6.1.4.1.164.6.2.15 | systemPort | DACS-MIB |
| 1.3.6.1.4.1.164.6.2.15.4 | prtTest | DACS-MIB |
| 1.3.6.1.4.1.164.6.2.15.4.1 | prtTestTable | DACS-MIB |
| 1.3.6.1.4.1.164.6.2.15.4.1.1 | prtTestEntry | DACS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.164.6.2.15.4.1.1.10 | prtTestVctCmd | RAD-MIB |