All MIBs › RAD-MIB › prtTestTimeout
prtTestTimeout
Module: RAD-MIB
OID (symbolic): RAD-MIB::prtTestTimeout
OID (numeric): 1.3.6.1.4.1.164.6.2.15.4.1.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description:
This object is applicable only when a single test is running. It indicates the test activation timeout in minutes. For RICi-E1T1, RICi-E3T3 the measurement unit is in seconds. When the timeout expires, the test is stopped. Value of 0 indicates test may run Forever
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.6.2.15.4.1.1.5 snmpwalk -v2c -c public <target> RAD-MIB::prtTestTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.6.2.15.4.1.1.5.1 snmpget -v2c -c public <target> RAD-MIB::prtTestTimeout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.6.2.15.4.1.1.5.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.6 | radGen | DACS-MIB |
| 1.3.6.1.4.1.164.6.2 | agnt | DACS-MIB |
| 1.3.6.1.4.1.164.6.2.15 | systemPort | DACS-MIB |
| 1.3.6.1.4.1.164.6.2.15.4 | prtTest | DACS-MIB |
| 1.3.6.1.4.1.164.6.2.15.4.1 | prtTestTable | DACS-MIB |
| 1.3.6.1.4.1.164.6.2.15.4.1.1 | prtTestEntry | DACS-MIB |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.5 | prtTestTimeout | RAD-MIB |