All MIBs › RAD-MIB › prtTestMacSwapLoopDestAddr
prtTestMacSwapLoopDestAddr
Module: RAD-MIB
OID (symbolic): RAD-MIB::prtTestMacSwapLoopDestAddr
OID (numeric): 1.3.6.1.4.1.164.6.2.15.4.1.1.17
Node type: OBJECT-TYPE
Type: MacAddress
Access: read-write
Description:
Configures the MAC address that will be sent in the Destination field of the packet in the outgoing direction.
What is prtTestMacSwapLoopDestAddr?
This OID specifies the destination MAC (media access control) address that will be used as the target in a loopback test packet. Setting this value configures where test traffic should return from in the loopback test. When troubleshooting network connectivity, an engineer sets this to the address of a known device and runs the test to verify packet path integrity.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.6.2.15.4.1.1.17 snmpwalk -v2c -c public <target> RAD-MIB::prtTestMacSwapLoopDestAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.6.2.15.4.1.1.17.1 snmpget -v2c -c public <target> RAD-MIB::prtTestMacSwapLoopDestAddr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.6.2.15.4.1.1.17.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.6 | radGen | DACS-MIB |
| 1.3.6.1.4.1.164.6.2 | agnt | DACS-MIB |
| 1.3.6.1.4.1.164.6.2.15 | systemPort | DACS-MIB |
| 1.3.6.1.4.1.164.6.2.15.4 | prtTest | DACS-MIB |
| 1.3.6.1.4.1.164.6.2.15.4.1 | prtTestTable | DACS-MIB |
| 1.3.6.1.4.1.164.6.2.15.4.1.1 | prtTestEntry | DACS-MIB |
| 1.3.6.1.4.1.164.6.2.15.4.1.1.17 | prtTestMacSwapLoopDestAddr | RAD-MIB |