All MIBs › RAD-MIB › prtT1E1PppEchoFailDetection
prtT1E1PppEchoFailDetection
Module: RAD-MIB
OID (symbolic): RAD-MIB::prtT1E1PppEchoFailDetection
OID (numeric): 1.3.6.1.4.1.164.3.3.3.2.2.1.34
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This object indicates whether the PPP Echo is taken into account for its Fail Detection. This object is relevant when Inband Mng between devices is Dedicated TS PPP. Default=Disable. Enable - will be selected mainly when a T1/E1 Ring exists and between 2 adjacent Ring devices there is another device or Net, that causes these Ring devices not to sense that the PPP connection between them is lost. In this case, Echo Request should be initiated by the port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.3.3.2.2.1.34 snmpwalk -v2c -c public <target> RAD-MIB::prtT1E1PppEchoFailDetection
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.3.3.2.2.1.34.1 snmpget -v2c -c public <target> RAD-MIB::prtT1E1PppEchoFailDetection.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.3.3.2.2.1.34.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.3 | dacsMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.3.3 | prtDacsMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.3.3.2 | prtT1E1 | DACS-MIB |
| 1.3.6.1.4.1.164.3.3.3.2.2 | prtT1E1CnfgTable | DACS-MIB |
| 1.3.6.1.4.1.164.3.3.3.2.2.1 | prtT1E1CnfgEntry | DACS-MIB |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.34 | prtT1E1PppEchoFailDetection | RAD-MIB |