RAD-MIB :: prtGenTestMaskXP

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsRAD-MIBprtGenTestMaskXP

prtGenTestMaskXP

Module: RAD-MIB

OID (symbolic): RAD-MIB::prtGenTestMaskXP

OID (numeric): 1.3.6.1.4.1.164.3.3.3.1.1.1.17

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: This is an Expanded test mask of the prtGenTestMask object.
The prtGenTestMask object reached its maximum, being an Integer with 31 bits.
This object indicates which tests from the  'prtGenTestCmdXP' list are 
allowed for the selected port.
If a specific test is allowed, its respective bit will be SET 
in the mask :

  TEST                  BIT
 -----------            ---
 localLoop               1         =LSB
 remoteLoop              2
 bert                    3
 plb                     4
 inband                  5

 prbs                    8
 loop2-v54  (RLB)        9
 loop3-v54  (LLB)       10

 Tone injection         13
 Tx-plb                 14
 Tx-llb                 15
 DTE loop (HSSI)        16

 HDSL-Tx-Inband         20
 HDSL-Rx-Inband         21
         Monitor                22  (test port)
         User Line Loopback         23

 Rem-Loop-on-Rem-Unit   25
         LBBD                   26
         LB1                    27
         LB2                    28
 BERT-on-Rem-Unit       29
         TS Remote Loop         30
         LLB-on-Rem-Unit        31
         Downstream-AIS         32
         Upstream-AIS           33
         Send-RDI               34
         Test Per TS            35 

 e.g : If the return value is  00000003 hex  ->
       Bits 1 & 2 are set -> the allowed tests are :
                                    local-loop
                                    remote-loop  

What is prtGenTestMaskXP?

This OID holds binary data used as a pattern mask during printer or device self-tests. The test mask defines which bits should be checked during diagnostics. Technicians use this during hardware troubleshooting to validate that test procedures match expected device capabilities.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.3.3.1.1.1.17
snmpwalk -v2c -c public <target> RAD-MIB::prtGenTestMaskXP

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.3.3.1.1.1.17.1
snmpget -v2c -c public <target> RAD-MIB::prtGenTestMaskXP.1

Start monitoring RAD Data Communications access/transmission/multiplexer equipment, entire product line (base enterprise MIB) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAD-MIB::prtGenTestMaskXP OID value, configure state conditions and alerts, and monitor any RAD Data Communications access/transmission/multiplexer equipment, entire product line (base enterprise MIB) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.164radDACS-MIB
1.3.6.1.4.1.164.3radWanDACS-MIB
1.3.6.1.4.1.164.3.3dacsMuxDACS-MIB
1.3.6.1.4.1.164.3.3.3prtDacsMuxDACS-MIB
1.3.6.1.4.1.164.3.3.3.1prtGenDACS-MIB
1.3.6.1.4.1.164.3.3.3.1.1prtGenParamTableDACS-MIB
1.3.6.1.4.1.164.3.3.3.1.1.1prtGenEntryDACS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.164.3.3.3.1.1.1.17prtGenTestMaskXPRAD-MIB