RAD-MIB :: prtExVcPbxTsRemPrt

MIB Reference — IPNetwork Monitor

All MIBsRAD-MIBprtExVcPbxTsRemPrt

prtExVcPbxTsRemPrt

Module: RAD-MIB

OID (symbolic): RAD-MIB::prtExVcPbxTsRemPrt

OID (numeric): 1.3.6.1.4.1.164.3.2.3.2.15.4.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description:

This attribute indicates the end-point port on the Remote unit. VF-24/T1 and VF-30/E1 cards have one external interface. VF-48/T1 and VF-60/E1 cards have two external interfaces. noConnect - when prtExVcPbxTsMode=unused, transparent, voiceTransparent or mng.

What is prtExVcPbxTsRemPrt?

This OID specifies which port on a remote unit is connected to this device for a voice or data circuit. It defines the physical connection point used to route calls or data between systems. An engineer would set this during initial circuit configuration or when reassigning a circuit to a different remote port for maintenance or upgrades.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.15.4.1.9
snmpwalk -v2c -c public <target> RAD-MIB::prtExVcPbxTsRemPrt

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.15.4.1.9.1
snmpget -v2c -c public <target> RAD-MIB::prtExVcPbxTsRemPrt.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.2.3.2.15.4.1.9.1 i <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.164radDACS-MIB
1.3.6.1.4.1.164.3radWanDACS-MIB
1.3.6.1.4.1.164.3.2muxHubDACS-MIB
1.3.6.1.4.1.164.3.2.3prtMuxDACS-MIB
1.3.6.1.4.1.164.3.2.3.2cnfgPrtMuxDACS-MIB
1.3.6.1.4.1.164.3.2.3.2.15prtVcPbxCnfgDACS-MIB
1.3.6.1.4.1.164.3.2.3.2.15.4prtExVcPbxTsTableDACS-MIB
1.3.6.1.4.1.164.3.2.3.2.15.4.1prtExVcPbxTsEntryDACS-MIB
1.3.6.1.4.1.164.3.2.3.2.15.4.1.9prtExVcPbxTsRemPrtRAD-MIB