All MIBs › RAD-MIB › prtExVc2ReversePolarity
prtExVc2ReversePolarity
Module: RAD-MIB
OID (symbolic): RAD-MIB::prtExVc2ReversePolarity
OID (numeric): 1.3.6.1.4.1.164.3.2.3.2.5.1.30
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This object Enables/Disables Reverse Polarity for this port.
What is prtExVc2ReversePolarity?
This object enables or disables reverse polarity compensation on a port interface, which inverts the signal polarity on electrical transmission lines. Some equipment requires reverse polarity correction for proper signal reception, especially in legacy or long-distance circuits. Operators would configure this during port setup or troubleshooting if received signals are inverted or degraded.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.5.1.30 snmpwalk -v2c -c public <target> RAD-MIB::prtExVc2ReversePolarity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.5.1.30.1 snmpget -v2c -c public <target> RAD-MIB::prtExVc2ReversePolarity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.2.3.2.5.1.30.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.2 | muxHub | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3 | prtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2 | cnfgPrtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.5 | prtVc2CnfgTable | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.5.1 | prtVc2CnfgEntry | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.30 | prtExVc2ReversePolarity | RAD-MIB |