All MIBs › RAD-MIB › prtExVc2RemType
prtExVc2RemType
Module: RAD-MIB
OID (symbolic): RAD-MIB::prtExVc2RemType
OID (numeric): 1.3.6.1.4.1.164.3.2.3.2.5.1.26
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Remote Type. Applicable for VC-6A/4LB card & for IPMUX-1E Far End Type - E1,T1(T1-ESF) or T1-D4 .
What is prtExVc2RemType?
This object specifies the type of remote equipment connected to a Virtual Channel 2 port on a RAD (Redundant Aggregation Device), such as E1, T1, T1-D4, loopback, or PBX systems. Network administrators set this value to match the actual remote equipment type so the port can operate with correct signaling and timing parameters. This is applicable only for specific RAD card models like VC-6A/4LB and IPMUX-1E.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.5.1.26 snmpwalk -v2c -c public <target> RAD-MIB::prtExVc2RemType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.5.1.26.1 snmpget -v2c -c public <target> RAD-MIB::prtExVc2RemType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.2.3.2.5.1.26.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.2 | muxHub | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3 | prtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2 | cnfgPrtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.5 | prtVc2CnfgTable | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.5.1 | prtVc2CnfgEntry | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.5.1.26 | prtExVc2RemType | RAD-MIB |