All MIBs › RAD-MIB › prtExVc2ObMode
prtExVc2ObMode
Module: RAD-MIB
OID (symbolic): RAD-MIB::prtExVc2ObMode
OID (numeric): 1.3.6.1.4.1.164.3.2.3.2.5.1.35
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object defines the Net operation mode of the Omni-Bus card's port. pointToPoint - only 2 end-point ports talk; like any other voice card omniBus - many talk and listen. Like conference call. All can listen to all. pointToMultiPointSrc - There is one Master who can be heard by all. All can talk, but only the Master can hear all. Others can hear only the Master. This port is of the Master (Src). pointToMultiPointDst - There is one Master who can be heard by all. All can talk, but only the Master can hear all. Others can hear only the Master. This port is of a Destination (NOT Master).
What is prtExVc2ObMode?
This configuration parameter defines the network operation mode of an Omni-Bus voice card port, supporting point-to-point, conference (omniBus), or point-to-multipoint source/destination modes. In point-to-point, only two ports communicate; in omniBus, all ports can talk and listen like a conference call; in point-to-multipoint, there is a master (source) heard by all or a destination that hears only the master. Operators set this mode to define how voice channels are logically interconnected and who can communicate with whom.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.5.1.35 snmpwalk -v2c -c public <target> RAD-MIB::prtExVc2ObMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.5.1.35.1 snmpget -v2c -c public <target> RAD-MIB::prtExVc2ObMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.2.3.2.5.1.35.1 i <value>
Start monitoring RAD Data Communications access/transmission/multiplexer equipment, entire product line (base enterprise MIB) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAD-MIB::prtExVc2ObMode OID value, configure state conditions and alerts, and monitor any RAD Data Communications access/transmission/multiplexer equipment, entire product line (base enterprise MIB) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.2 | muxHub | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3 | prtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2 | cnfgPrtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.5 | prtVc2CnfgTable | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.5.1 | prtVc2CnfgEntry | DACS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.164.3.2.3.2.5.1.35 | prtExVc2ObMode | RAD-MIB |