All MIBs › RAD-MIB › prtExTsBitTest
prtExTsBitTest
Module: RAD-MIB
OID (symbolic): RAD-MIB::prtExTsBitTest
OID (numeric): 1.3.6.1.4.1.164.3.1.4.2.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This attribute indicates a test to be activated on the selected Bit. It is applicable only when prtExPh1MlTsTest=split(254). none - no test is applied for the selected Bit. notApplicable - when prtExPh1MlTsTest is NOT split(254).
What is prtExTsBitTest?
This object indicates what type of test should be activated on a selected bit in a time-slot (TS) configuration when the split mode is active. It allows a technician to run diagnostic tests on individual time-slots. An operator or technician uses this to perform troubleshooting on specific time-slots to verify signal integrity and detect transmission errors.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.1.4.2.1.1.8 snmpwalk -v2c -c public <target> RAD-MIB::prtExTsBitTest
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.1.4.2.1.1.8.1 snmpget -v2c -c public <target> RAD-MIB::prtExTsBitTest.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.1.4.2.1.1.8.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.1 | wanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.4 | prtWanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.4.2 | cnfgPrtGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.4.2.1 | prtExTsSplitTable | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.4.2.1.1 | prtExTsSplitEntry | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.4.2.1.1.8 | prtExTsBitTest | RAD-MIB |