RAD-MIB :: prtExPh1MlTsTest

MIB Reference — IPNetwork Monitor

All MIBsRAD-MIBprtExPh1MlTsTest

prtExPh1MlTsTest

Module: RAD-MIB

OID (symbolic): RAD-MIB::prtExPh1MlTsTest

OID (numeric): 1.3.6.1.4.1.164.3.2.3.2.2.2.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description:

This attribute indicates a test to be activated on the selected TS. It is applicable only when prtSTstCmd=testPerTS(31). notApplicable - when prtSTstCmd is NOT testPerTS(31). none - no test is applied for the selected TS. split - when the tests are per Bit of the selected TS.

What is prtExPh1MlTsTest?

This OID controls which diagnostic test should be run on individual timeslots in a Phase 1 multi-line interface for telecom equipment. Available tests include local/remote loopback, BERT (Bit Error Rate Test), and tone injection to help technicians verify signal quality and connectivity. Operators configure this when troubleshooting transmission problems or validating line quality.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.2.2.1.9
snmpwalk -v2c -c public <target> RAD-MIB::prtExPh1MlTsTest

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.2.2.1.9.1
snmpget -v2c -c public <target> RAD-MIB::prtExPh1MlTsTest.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.2.3.2.2.2.1.9.1 i <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.164radDACS-MIB
1.3.6.1.4.1.164.3radWanDACS-MIB
1.3.6.1.4.1.164.3.2muxHubDACS-MIB
1.3.6.1.4.1.164.3.2.3prtMuxDACS-MIB
1.3.6.1.4.1.164.3.2.3.2cnfgPrtMuxDACS-MIB
1.3.6.1.4.1.164.3.2.3.2.2prtPh1MlCnfgDACS-MIB
1.3.6.1.4.1.164.3.2.3.2.2.2prtExPh1MlTsTableDACS-MIB
1.3.6.1.4.1.164.3.2.3.2.2.2.1prtExPh1MlTsEntryDACS-MIB
1.3.6.1.4.1.164.3.2.3.2.2.2.1.9prtExPh1MlTsTestRAD-MIB