All MIBs › RAD-MIB › prtExPh1MlMultiplier
prtExPh1MlMultiplier
Module: RAD-MIB
OID (symbolic): RAD-MIB::prtExPh1MlMultiplier
OID (numeric): 1.3.6.1.4.1.164.3.2.3.2.2.1.1.25
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
The data rate of each TS. The multiplier values can be 56 kbps or 64 kbps.
What is prtExPh1MlMultiplier?
This configuration object specifies the data rate for each time slot (TS) in a multiplexed T1/E1 circuit, with values being either 56 kilobits per second or 64 kilobits per second. It controls how the raw transmission line bandwidth is allocated among channels. Operators set this value to match the speed requirements of legacy services being multiplexed over the WAN interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.2.1.1.25 snmpwalk -v2c -c public <target> RAD-MIB::prtExPh1MlMultiplier
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.2.3.2.2.1.1.25.1 snmpget -v2c -c public <target> RAD-MIB::prtExPh1MlMultiplier.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.2.3.2.2.1.1.25.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.2 | muxHub | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3 | prtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2 | cnfgPrtMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.2 | prtPh1MlCnfg | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.2.1 | prtExPh1MlCnfgTable | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1 | prtExPh1MlCnfgEntry | DACS-MIB |
| 1.3.6.1.4.1.164.3.2.3.2.2.1.1.25 | prtExPh1MlMultiplier | RAD-MIB |