All MIBs › RAD-MIB › prtDs3IntervalBitParity
prtDs3IntervalBitParity
Module: RAD-MIB
OID (symbolic): RAD-MIB::prtDs3IntervalBitParity
OID (numeric): 1.3.6.1.4.1.164.3.1.6.3.1.3.1.13
Node type: OBJECT-TYPE
Type: Gauge32
Access: read-only
Description:
Bit Parity Error counter. Relevant to T3 only.
What is prtDs3IntervalBitParity?
This OID counts bit parity errors detected on a T3 (legacy high-speed telecom) circuit during the current measurement interval. Parity errors indicate signal corruption on the line, usually from noise or poor cable quality. A telecom technician uses this counter to determine if a T3 circuit needs maintenance or replacement.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.1.6.3.1.3.1.13 snmpwalk -v2c -c public <target> RAD-MIB::prtDs3IntervalBitParity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.1.6.3.1.3.1.13.1 snmpget -v2c -c public <target> RAD-MIB::prtDs3IntervalBitParity.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.1 | wanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6 | diverseIfWanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6.3 | ds3Interface | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.3.1 | prtDs3PerfHistory | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.3.1.3 | prtDs3IntervalTable | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1 | prtDs3IntervalEntry | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.3.1.3.1.13 | prtDs3IntervalBitParity | RAD-MIB |