All MIBs › RAD-MIB › prtBertRxBits
prtBertRxBits
Module: RAD-MIB
OID (symbolic): RAD-MIB::prtBertRxBits
OID (numeric): 1.3.6.1.4.1.164.3.3.3.1.5.1.15
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description:
How many data bits were Received since BERT started to run, or since last counter clear (prtBertClearCounters set to on).
What is prtBertRxBits?
This OID counts the total bits received since a BERT (Bit Error Rate Test) started running. BERT tests measure data quality by comparing sent and received patterns. A technician would check this after running BERT to verify how much data was tested and look for bit errors that indicate signal quality problems.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.3.3.1.5.1.15 snmpwalk -v2c -c public <target> RAD-MIB::prtBertRxBits
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.3.3.1.5.1.15.1 snmpget -v2c -c public <target> RAD-MIB::prtBertRxBits.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.3 | dacsMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.3.3 | prtDacsMux | DACS-MIB |
| 1.3.6.1.4.1.164.3.3.3.1 | prtGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.3.3.1.5 | prtBertTable | DACS-MIB |
| 1.3.6.1.4.1.164.3.3.3.1.5.1 | prtBertEntry | DACS-MIB |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.15 | prtBertRxBits | RAD-MIB |