All MIBs › RAD-MIB › ip2IfTdmBackUpNextHop
ip2IfTdmBackUpNextHop
Module: RAD-MIB
OID (symbolic): RAD-MIB::ip2IfTdmBackUpNextHop
OID (numeric): 1.3.6.1.4.1.164.3.1.6.7.1.1.30
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-create
Description:
Defines the TDM bundle default router in case there was a switch from the Primary Link (for example an ETH port) to a TDM backup Link like E1, T1 or Serial Link. This parameter is relevant only when a Backup Link is configured. When a Backup Link is not configured the value will be: 0.0.0.0
What is ip2IfTdmBackUpNextHop?
This object specifies the default gateway IP address to use when traffic switches from a primary link (like Ethernet) to a backup TDM link (T1, E1, or serial port) due to primary link failure. A value of 0.0.0.0 means no backup link is configured. Network operators set this to ensure routing continues correctly during link failovers.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.1 | wanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6 | diverseIfWanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6.7 | ip2If | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.7.1 | ip2IfTable | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.7.1.1 | ip2IfEntry | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.30 | ip2IfTdmBackUpNextHop | RAD-MIB |