All MIBs › RAD-MIB › ip2IfSuperTandemBitMask
ip2IfSuperTandemBitMask
Module: RAD-MIB
OID (symbolic): RAD-MIB::ip2IfSuperTandemBitMask
OID (numeric): 1.3.6.1.4.1.164.3.1.6.7.1.1.86
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-create
Description:
This MIB object enables controlling the Time Slot/Channel rate. Valid values: 1 - FF HEX Each BIT represents 1/8 of the TS. Example: 7E (0111 1110) means that 6/8 of the TS (the center ones) are masked and data will be Tx/Rx only through them. This MIB object is relevant only when Super Tandem is enabled.
What is ip2IfSuperTandemBitMask?
This OID stores a hexadecimal bitmask that controls which portions of a time-division multiplexed channel are active for data transmission. Configuring this lets you selectively enable or disable parts of the channel capacity. A telecom engineer uses this to split channel capacity between different services or disable faulty portions of a T1/E1 line.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.1 | wanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6 | diverseIfWanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6.7 | ip2If | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.7.1 | ip2IfTable | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.7.1.1 | ip2IfEntry | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.86 | ip2IfSuperTandemBitMask | RAD-MIB |