All MIBs › RAD-MIB › ip2IfModemProtocolMode
ip2IfModemProtocolMode
Module: RAD-MIB
OID (symbolic): RAD-MIB::ip2IfModemProtocolMode
OID (numeric): 1.3.6.1.4.1.164.3.1.6.7.1.1.84
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-create
Description:
This octet string contains the mode of each Modem Protocol used on the bundle. For each protocol one octet will be used.
Octet #1 will be used for V.22 Protocol. Octet #2, #3, #4... are reserved for future protocols.
Octet #1 values: 0 - Not Applicable 1 - VBD: Voice Band Data. 2 - Relay: Pulse Code Modulated (PCM) data is sent via the bundle.
For V.22: This MIB object is relevant only when ip2IfModemCalls = relay (4).
What is ip2IfModemProtocolMode?
This object specifies the operating mode for each modem protocol used in a data bundle, indicating whether voice band data (VBD) or PCM relay mode is active. An operator configures this for hybrid voice/data lines to define how analog signals are transmitted. Different modes support different bandwidth and quality characteristics.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.1 | wanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6 | diverseIfWanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6.7 | ip2If | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.7.1 | ip2IfTable | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.7.1.1 | ip2IfEntry | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.84 | ip2IfModemProtocolMode | RAD-MIB |