All MIBs › RAD-MIB › ip2IfIntervalStatSeqErrors
ip2IfIntervalStatSeqErrors
Module: RAD-MIB
OID (symbolic): RAD-MIB::ip2IfIntervalStatSeqErrors
OID (numeric): 1.3.6.1.4.1.164.3.1.6.7.11.1.2
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description:
Number of seconds that the sequence number of an incoming Frame causes a transition from the 'sync' state to the 'out of sequence' state in the selected interval.
What is ip2IfIntervalStatSeqErrors?
This counter measures the number of seconds during which sequence number errors caused a link to transition from synchronized to out-of-sequence state in a specified interval. It represents synchronization failures on a Frame Relay or similar interface during monitoring period. Network operators examine this counter to detect link quality degradation and identify when sequence errors are disrupting normal operation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.1.6.7.11.1.2 snmpwalk -v2c -c public <target> RAD-MIB::ip2IfIntervalStatSeqErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.1.6.7.11.1.2.1 snmpget -v2c -c public <target> RAD-MIB::ip2IfIntervalStatSeqErrors.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.1 | wanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6 | diverseIfWanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6.7 | ip2If | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.7.11 | ip2IfIntervalStatTable | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.7.11.1 | ip2IfIntervalStatEntry | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.7.11.1.2 | ip2IfIntervalStatSeqErrors | RAD-MIB |