All MIBs › RAD-MIB › ip2IfExitPort
ip2IfExitPort
Module: RAD-MIB
OID (symbolic): RAD-MIB::ip2IfExitPort
OID (numeric): 1.3.6.1.4.1.164.3.1.6.7.1.1.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description:
This object determines to which external port the traffic will be sent. auto - the device will decide automatically the exit port. If there is an option for Tx via more than one ETH card then use ext1 (1) and ext2(2) for ETH card #1 (ex. LAN1 or Ggabit-ETH1) and use card2Ext1(5) and card2Ext2(6) for card #2 (ex. LAN1 or Ggabit-ETH1). In Vmux-110/210 ext5 is used for ETH-NET, ext 6 is used for E1/T1 link and ext7 is used for Serial Link. In Vmux-2100 Main Board: ext 5 is used for ETH-NET, ext 6 is used for E1/T1 link A, prtE1T1B is used for E1/T1 link B and prtEthUser is used for ETH-User. prt17(10) - prt20(13) values were added in order to support Gmux2000 VMX Card.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.1 | wanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6 | diverseIfWanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6.7 | ip2If | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.7.1 | ip2IfTable | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.7.1.1 | ip2IfEntry | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.7.1.1.15 | ip2IfExitPort | RAD-MIB |