All MIBs › RAD-MIB › ip2IfCurrentStatSeqErrors
ip2IfCurrentStatSeqErrors
Module: RAD-MIB
OID (symbolic): RAD-MIB::ip2IfCurrentStatSeqErrors
OID (numeric): 1.3.6.1.4.1.164.3.1.6.7.10.1.1
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description:
Number of seconds that the sequence number of an incoming Frame causes a transition from the 'sync' state to the 'out of sequence' state in the current interval.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.1.6.7.10.1.1 snmpwalk -v2c -c public <target> RAD-MIB::ip2IfCurrentStatSeqErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.1.6.7.10.1.1.1 snmpget -v2c -c public <target> RAD-MIB::ip2IfCurrentStatSeqErrors.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.1 | wanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6 | diverseIfWanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6.7 | ip2If | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.7.10 | ip2IfCurrentStatTable | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.7.10.1 | ip2IfCurrentStatEntry | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.7.10.1.1 | ip2IfCurrentStatSeqErrors | RAD-MIB |