All MIBs › RAD-MIB › ip2IfCurrentStatBufUnderflows
ip2IfCurrentStatBufUnderflows
Module: RAD-MIB
OID (symbolic): RAD-MIB::ip2IfCurrentStatBufUnderflows
OID (numeric): 1.3.6.1.4.1.164.3.1.6.7.10.1.2
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description:
Number of seconds that the buffer underflows in the current interval. This records the count of the number of seconds the Receive (Eth to TDM) buffer underflows in the current interval. In the case of a continuous underflow caused by a loss of Frame flow, a single buffer underflow should be counted.
What is ip2IfCurrentStatBufUnderflows?
This OID holds a counter of how many seconds experienced buffer underflow during the current measurement interval. Monitoring this tells you if the device is losing data because it cannot keep up with incoming traffic on its Ethernet-to-TDM converter. An operator would watch this to detect if a link is congested or if timing synchronization is failing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.1.6.7.10.1.2 snmpwalk -v2c -c public <target> RAD-MIB::ip2IfCurrentStatBufUnderflows
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.1.6.7.10.1.2.1 snmpget -v2c -c public <target> RAD-MIB::ip2IfCurrentStatBufUnderflows.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.1 | wanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6 | diverseIfWanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6.7 | ip2If | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.7.10 | ip2IfCurrentStatTable | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.7.10.1 | ip2IfCurrentStatEntry | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.7.10.1.2 | ip2IfCurrentStatBufUnderflows | RAD-MIB |