All MIBs › RAD-MIB › ethJumboFrameEnable
ethJumboFrameEnable
Module: RAD-MIB
OID (symbolic): RAD-MIB::ethJumboFrameEnable
OID (numeric): 1.3.6.1.4.1.164.3.1.6.1.1.1.16
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This parameter defines whether to support Jumbo Frame or not.
What is ethJumboFrameEnable?
This configuration parameter controls whether the RAD device supports Jumbo Frames (Ethernet frames larger than the standard 1500-byte maximum transmission unit) on Ethernet interfaces. Enabling jumbo frames increases throughput for large data transfers but requires all devices on the network segment to support the feature. Network engineers configure this to optimize performance for bandwidth-intensive applications when all connected devices support larger frame sizes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.1.6.1.1.1.16 snmpwalk -v2c -c public <target> RAD-MIB::ethJumboFrameEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.1.6.1.1.1.16.1 snmpget -v2c -c public <target> RAD-MIB::ethJumboFrameEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.3.1.6.1.1.1.16.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.1 | wanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6 | diverseIfWanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6.1 | ethIf | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6.1.1 | ethIfTable | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6.1.1.1 | ethIfEntry | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6.1.1.1.16 | ethJumboFrameEnable | RAD-MIB |