All MIBs › RAD-MIB › ethIfIntervalFCSErrors
ethIfIntervalFCSErrors
Module: RAD-MIB
OID (symbolic): RAD-MIB::ethIfIntervalFCSErrors
OID (numeric): 1.3.6.1.4.1.164.3.1.6.1.2.2.1.7
Node type: OBJECT-TYPE
Type: Gauge32
Access: read-only
Description:
The counter associated with the number of received frames that didn't pass the FCS test, encountered by the Ethernet interface in the interval.
What is ethIfIntervalFCSErrors?
This gauge counts the number of received Ethernet frames that failed Frame Check Sequence (FCS) validation during a specific measurement interval. FCS errors indicate corrupted packets that arrived at the interface with invalid checksums, typically caused by electrical noise or transmission errors. Monitoring this value helps operators identify physical layer problems, cabling issues, or interface quality degradation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.3.1.6.1.2.2.1.7 snmpwalk -v2c -c public <target> RAD-MIB::ethIfIntervalFCSErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.3.1.6.1.2.2.1.7.1 snmpget -v2c -c public <target> RAD-MIB::ethIfIntervalFCSErrors.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.3 | radWan | DACS-MIB |
| 1.3.6.1.4.1.164.3.1 | wanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6 | diverseIfWanGen | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6.1 | ethIf | DACS-MIB |
| 1.3.6.1.4.1.164.3.1.6.1.2 | ethIfPerformance | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.1.2.2 | ethIfIntervalTable | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1 | ethIfIntervalEntry | RAD-MIB |
| 1.3.6.1.4.1.164.3.1.6.1.2.2.1.7 | ethIfIntervalFCSErrors | RAD-MIB |