All MIBs › RAD-MIB › atmNteOamEnable
atmNteOamEnable
Module: RAD-MIB
OID (symbolic): RAD-MIB::atmNteOamEnable
OID (numeric): 1.3.6.1.4.1.164.12.3.1.1.26.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This parameter determines if the specified OAM cells will be enabled.
What is atmNteOamEnable?
This object controls whether ATM Operation and Maintenance (OAM) cells are generated and processed on an ATM Network Termination Equipment interface. OAM cells carry diagnostic and performance management information. An operator enables this to activate ATM loop detection, continuity checking, and fault isolation for circuit health monitoring.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.12.3.1.1.26.1.4 snmpwalk -v2c -c public <target> RAD-MIB::atmNteOamEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.12.3.1.1.26.1.4.1 snmpget -v2c -c public <target> RAD-MIB::atmNteOamEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.12.3.1.1.26.1.4.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.12 | radAtm | RAD-MIB |
| 1.3.6.1.4.1.164.12.3 | atmNte | RAD-MIB |
| 1.3.6.1.4.1.164.12.3.1 | atmNteSys | RAD-MIB |
| 1.3.6.1.4.1.164.12.3.1.1 | atmNteSysConfig | RAD-MIB |
| 1.3.6.1.4.1.164.12.3.1.1.26 | atmNteOamTable | RAD-MIB |
| 1.3.6.1.4.1.164.12.3.1.1.26.1 | atmNteOamEntry | RAD-MIB |
| 1.3.6.1.4.1.164.12.3.1.1.26.1.4 | atmNteOamEnable | RAD-MIB |