All MIBs › RAD-MIB › atmConfIfInputRate
atmConfIfInputRate
Module: RAD-MIB
OID (symbolic): RAD-MIB::atmConfIfInputRate
OID (numeric): 1.3.6.1.4.1.164.12.3.2.1.1.1.8
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description:
This parameter indicates the input rate in cells/sec, which is supported per port. Successfully setting this parameter is dependent on all other ports values calculations, which are described in the NMS SRS.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.12.3.2.1.1.1.8 snmpwalk -v2c -c public <target> RAD-MIB::atmConfIfInputRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.12.3.2.1.1.1.8.1 snmpget -v2c -c public <target> RAD-MIB::atmConfIfInputRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.164.12.3.2.1.1.1.8.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.12 | radAtm | RAD-MIB |
| 1.3.6.1.4.1.164.12.3 | atmNte | RAD-MIB |
| 1.3.6.1.4.1.164.12.3.2 | atmNtePrt | RAD-MIB |
| 1.3.6.1.4.1.164.12.3.2.1 | atmNtePrtConfig | RAD-MIB |
| 1.3.6.1.4.1.164.12.3.2.1.1 | atmNteConfIfTable | RAD-MIB |
| 1.3.6.1.4.1.164.12.3.2.1.1.1 | atmNteConfIfEntry | RAD-MIB |
| 1.3.6.1.4.1.164.12.3.2.1.1.1.8 | atmConfIfInputRate | RAD-MIB |