All MIBs › RAD-MIB › agnCurrClkSsmBased
agnCurrClkSsmBased
Module: RAD-MIB
OID (symbolic): RAD-MIB::agnCurrClkSsmBased
OID (numeric): 1.3.6.1.4.1.164.6.2.52.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description:
This parameter indicates whether clock source is selected based on receive clock quality. Clock quality is indicated in S1 byte inside SONET/SDH overhead, (encoded as SSM - Synchronization Status Messaging).
What is agnCurrClkSsmBased?
This OID indicates whether the device selects its clock source based on quality metrics encoded in the SONET/SDH signal (SSM—Synchronization Status Messaging). It shows if intelligent clock selection is active. A network operator would enable this to automatically switch to a higher-quality clock source when available, ensuring network timing stays accurate.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.6.2.52.2.1.6 snmpwalk -v2c -c public <target> RAD-MIB::agnCurrClkSsmBased
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.164.6.2.52.2.1.6.1 snmpget -v2c -c public <target> RAD-MIB::agnCurrClkSsmBased.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.164 | rad | DACS-MIB |
| 1.3.6.1.4.1.164.6 | radGen | DACS-MIB |
| 1.3.6.1.4.1.164.6.2 | agnt | DACS-MIB |
| 1.3.6.1.4.1.164.6.2.52 | agnClockSource | RAD-MIB |
| 1.3.6.1.4.1.164.6.2.52.2 | agnCurrClkTable | RAD-MIB |
| 1.3.6.1.4.1.164.6.2.52.2.1 | agnCurrClkEntry | RAD-MIB |
| 1.3.6.1.4.1.164.6.2.52.2.1.6 | agnCurrClkSsmBased | RAD-MIB |