QLOGIC-MIB

All MIBs › QLOGIC-MIB

Organization: QLOGIC Corporation

Last Updated: 2004-03-01

Category: Fibre Channel and SAN

Description: Covers configuration, port statistics, login sessions, and fabric topology information for QLogic Fibre Channel HBAs.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is QLOGIC-MIB?

QLOGIC-MIB is a QLOGIC Corporation (enterprise OID 1663) proprietary MIB extending the standard FIBRE-CHANNEL-FE-MIB's fcFxPortPhysTable with volatile control objects for ports on a QLogic SANbox Fibre Channel switch. Its port-physical table, keyed by module/port index, records admin/operational status, while a port-status table records operating/admin mode, alongside port-link-down/link-up notifications. As a status/notification MIB it lets an administrator confirm Fibre Channel port operational status and get alerted on link-state transitions on a QLogic SANbox switch. It is deployed on QLogic Corporation SANbox Fibre Channel switches. Engineers can download the QLOGIC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in QLOGIC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

QLogic Corporation SANbox Fibre Channel switches

Monitoring Examples

An administrator receives qlSB2PortLinkDown to identify a Fibre Channel port that dropped link on a QLogic SANbox switch.

What Can Be Monitored

Fibre Channel port operational status and link-state transitions

Imported Objects

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE
enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
FCQ fcQlModuleIndex	1.3.6.1.4.1.1663.1.3.10.1.1.1	FcQlModuleIndex	not-accessible	This object identifies the module within the Fabric Element for which this entry contains information. This value is never greater than fcFeModuleCapacity.
FCQ fcQlModuleStatusIndex	1.3.6.1.4.1.1663.1.3.11.1.1.1	FcQlModuleIndex	not-accessible	This object identifies the module within the Fabric Element for which this entry contains information. This value is never greater than fcFeModuleCapacity.
INT fcQxPortAdminMode	1.3.6.1.4.1.1663.1.3.11.1.1.4	INTEGER	read-write	The desired operational mode of the FxPort.
FCQ fcQxPortIndex	1.3.6.1.4.1.1663.1.3.10.1.1.2	FcQxPortIndex	not-accessible	This object identifies the QxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified QxPort until the module is re-initialized.
INT fcQxPortOperMode	1.3.6.1.4.1.1663.1.3.11.1.1.3	INTEGER	read-only	The current operational mode of the FxPort.
INT fcQxPortPhysAdminStatus	1.3.6.1.4.1.1663.1.3.10.1.1.3	INTEGER	read-write	The desired state of the QxPort. A management station may place the QxPort in a desired state by setting this object accordingly. The testing(3) state indicates that no operational frames can be passed. When a Fabric Element initializes, all QxPorts start with fcQxPortPhysAdminStatus in the offline(2) state. As the result of either explicit management action or per configuration information accessible by the Fabric Element, fcQxPortPhysAdminStatus is then changed to either the online(1) or testing(3) states, or remains in the offline state.
fcQxPortPhysEntry	1.3.6.1.4.1.1663.1.3.10.1.1		not-accessible	An entry containing physical level status and parameters of a QxPort.
INT fcQxPortPhysOperStatus	1.3.6.1.4.1.1663.1.3.10.1.1.4	INTEGER	read-only	The current operational status of the QxPort. The testing(3) indicates that no operational frames can be passed. If fcQxPortPhysAdminStatus is offline(2) then fcQxPortPhysOperStatus should be offline(2). If fcQxPortPhysAdminStatus is changed to online(1) then fcQxPortPhysOperStatus should change to online(1) if the QxPort is ready to accept Fabric Login request from the attached NxPort; it should proceed and remain in the link- failure(4) state if and only if there is a fault that prevents it from going to the online(1) state.
fcQxPortPhysTable	1.3.6.1.4.1.1663.1.3.10.1		not-accessible	A table that contains, one entry for each QxPort in the Fabric Element, physical level status and parameters of the QxPorts.
fcQxPortStatusEntry	1.3.6.1.4.1.1663.1.3.11.1.1		not-accessible	An entry containing operational status and parameters of a QxPort.
FCQ fcQxPortStatusIndex	1.3.6.1.4.1.1663.1.3.11.1.1.2	FcQxPortIndex	not-accessible	This object identifies the QxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified QxPort until the module is re-initialized.
fcQxPortStatusTable	1.3.6.1.4.1.1663.1.3.11.1		not-accessible	A table that contains, one entry for each QxPort in the Fabric Element, operational status and parameters of the QxPorts.
qlogic	1.3.6.1.4.1.1663			This table replaces the fcFxPortPhysTable module defined in FIBRE-CHANNEL-FE-MIB. It defines volatile control objects for ports in a QLogic SANbox switch.
qLogicExperimental	1.3.6.1.4.1.1663.1.3
qLogicExperimentalBase	1.3.6.1.4.1.1663.1.3.0
qLogicOidTree	1.3.6.1.4.1.1663.1
qlSB2PortControl	1.3.6.1.4.1.1663.1.3.10
NTF qlSB2PortLinkDown	1.3.6.1.4.1.1663.1.3.0.10			A linkDown trap signifies that the SNMP entity, acting in an agent role, has detected that the fcQxPortPhysOperStatus object for one of its communication links has left the online state and transitioned to some other state. The current state is indicated by the included value of fcQxPortPhysOperStatus.
NTF qlSB2PortLinkUp	1.3.6.1.4.1.1663.1.3.0.11			A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the fcQxPortPhysOperStatus object for one of its communication links has entered the online state from some other state. The current state is indicated by the included value of fcQxPortPhysOperStatus.
qlSB2PortStatus	1.3.6.1.4.1.1663.1.3.11

RFC description

Manages QLogic Fibre Channel HBA configuration, port statistics, login sessions, and fabric topology information.

Start monitoring QLogic Corporation SANbox Fibre Channel switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download QLOGIC-MIB

What Is QLOGIC-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description