All MIBs › PSA-LinEmulexTrap-MIB
Category: Fibre Channel and SAN, Server Hardware Monitoring
Description:
Provides NEC ESMPRO ServerAgents trap notifications for Emulex Fibre Channel HBA driver fault events on Linux servers.
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| TimeTicks | |
| enterprises | |
| mgmt |
From RFC1213-MIB
| DisplayString | |
| mib-2 |
What Is PSA-LinEmulexTrap-MIB?
PSA-LinEmulexTrap-MIB is part of NEC's ESMPRO ServerAgent suite and defines SNMP trap notifications specifically for Emulex Fibre Channel HBA (Host Bus Adapter) driver fault events on Linux-based NEC servers. Rather than polled tables, it is a trap-oriented module: its objects carry contextual detail delivered at the moment of a fault, including partition name/ID, event level and ID, server unit name, management-blade VIP, and hardware identifiers (part number, stepping, serial number, model number) plus a suspect-component indicator. Its monitoring focus is squarely hardware fault/status reporting -- flagging Emulex HBA driver-detected problems (e.g., link loss, adapter failure) as asynchronous alerts rather than continuously polled counters. As part of ESMPRO ServerAgent, it depends on and is correlated with NEC's broader ESMPRO server-management MIB suite and the underlying Emulex driver's own event model. It is deployed on NEC Express5800-class Linux servers equipped with Emulex Fibre Channel HBAs in SAN-attached environments, where the PSA-LinEmulexTrap-MIB MIB supplies the trap definitions used to catch HBA driver faults.
IPNetwork Monitor allows you to monitor SNMP objects defined in PSA-LinEmulexTrap-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- HBA fault event level and ID
- affected server/partition identity
- HBA serial/model/part number
- suspect component indicator
Supported Devices
- Fujitsu PRIMEQUEST server partition, Linux, Emulex Fibre Channel HBA (driver fault traps)
Monitoring Examples
When an Emulex driver detects a fault, this MIB's trap would carry trapEventLevel and trapEventId to classify severity/type, trapUnitName and trapPartitionName/trapPartitionId to identify which server or logical partition raised it, and trapSerialNo/trapModelNo/trapPartNo to identify the specific HBA hardware. trapSuspect flags a suspect component for follow-up. An NMS receiving a high-severity trapEventLevel here would alert on-call staff to check SAN connectivity or replace a failing HBA on the named unit.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| fujitsu | 1.3.6.1.4.1.211 | |||
| products | 1.3.6.1.4.1.211.1 | |||
| iaServer | 1.3.6.1.4.1.211.1.31 | |||
| primequest | 1.3.6.1.4.1.211.1.31.1 | |||
| partition | 1.3.6.1.4.1.211.1.31.1.2 | |||
| parititonVariables | 1.3.6.1.4.1.211.1.31.1.2.200 | |||
| trapVarComInfo | 1.3.6.1.4.1.211.1.31.1.2.200.1 | |||
| STR trapPartitionName | 1.3.6.1.4.1.211.1.31.1.2.200.1.1 | DisplayString | not-accessible | Partition name which trap is generated. |
| INT trapPartitionId | 1.3.6.1.4.1.211.1.31.1.2.200.1.2 | INTEGER | not-accessible | Paritition identifier which trap is generated. |
| STR trapEventLevel | 1.3.6.1.4.1.211.1.31.1.2.200.1.3 | DisplayString | not-accessible | Event level |
| INT trapEventId | 1.3.6.1.4.1.211.1.31.1.2.200.1.4 | INTEGER | not-accessible | Event Identifier |
| STR trapUnitName | 1.3.6.1.4.1.211.1.31.1.2.200.1.5 | DisplayString | not-accessible | Unit name which trap is generated. |
| STR trapMmbVip | 1.3.6.1.4.1.211.1.31.1.2.200.1.6 | DisplayString | not-accessible | Management board vertual IP address. |
| trapVarDivInfo | 1.3.6.1.4.1.211.1.31.1.2.200.2 | |||
| STR trapPartNo | 1.3.6.1.4.1.211.1.31.1.2.200.2.1 | DisplayString | not-accessible | Parts number of trap source. |
| STR trapStepping | 1.3.6.1.4.1.211.1.31.1.2.200.2.2 | DisplayString | not-accessible | |
| STR trapSerialNo | 1.3.6.1.4.1.211.1.31.1.2.200.2.3 | DisplayString | not-accessible | Serial number of trap source. |
| STR trapModelNo | 1.3.6.1.4.1.211.1.31.1.2.200.2.4 | DisplayString | not-accessible | Model number of trap source. |
| STR trapSuspect | 1.3.6.1.4.1.211.1.31.1.2.200.2.5 | DisplayString | not-accessible | Logical name or pci bus number of trap source. |
| STR trapVendorId | 1.3.6.1.4.1.211.1.31.1.2.200.2.6 | DisplayString | not-accessible | Vendor identifier of trap source. |
| STR trapDeviceId | 1.3.6.1.4.1.211.1.31.1.2.200.2.7 | DisplayString | not-accessible | Device identifier of trap source. |
| STR trapRevision | 1.3.6.1.4.1.211.1.31.1.2.200.2.8 | DisplayString | not-accessible | Revision of trap source. |
| STR trapCardName | 1.3.6.1.4.1.211.1.31.1.2.200.2.9 | DisplayString | not-accessible | Device name of trap source. |
| STR trapErrDetail | 1.3.6.1.4.1.211.1.31.1.2.200.2.10 | DisplayString | not-accessible | |
| STR trapErrCode | 1.3.6.1.4.1.211.1.31.1.2.200.2.11 | DisplayString | not-accessible | |
| STR trapIrpCode | 1.3.6.1.4.1.211.1.31.1.2.200.2.12 | DisplayString | not-accessible | |
| INT trapHbaNo | 1.3.6.1.4.1.211.1.31.1.2.200.2.13 | INTEGER | not-accessible | |
| STR trapErrCause | 1.3.6.1.4.1.211.1.31.1.2.200.2.14 | DisplayString | not-accessible | |
| INT trapPathNo | 1.3.6.1.4.1.211.1.31.1.2.200.2.15 | INTEGER | not-accessible | |
| STR trapDiskId | 1.3.6.1.4.1.211.1.31.1.2.200.2.16 | DisplayString | not-accessible | |
| STR trapFmrDiskId | 1.3.6.1.4.1.211.1.31.1.2.200.2.17 | DisplayString | not-accessible | |
| STR trapCurDiskId | 1.3.6.1.4.1.211.1.31.1.2.200.2.18 | DisplayString | not-accessible | |
| STR trapPathId | 1.3.6.1.4.1.211.1.31.1.2.200.2.19 | DisplayString | not-accessible | |
| STR trapPhysIf | 1.3.6.1.4.1.211.1.31.1.2.200.2.20 | DisplayString | not-accessible | |
| STR trapVirtualIf | 1.3.6.1.4.1.211.1.31.1.2.200.2.21 | DisplayString | not-accessible | |
| STR trapLogicalIp | 1.3.6.1.4.1.211.1.31.1.2.200.2.22 | DisplayString | not-accessible | |
| STR trapWatchIp | 1.3.6.1.4.1.211.1.31.1.2.200.2.23 | DisplayString | not-accessible | |
| STR trapInterface | 1.3.6.1.4.1.211.1.31.1.2.200.2.24 | DisplayString | not-accessible | |
| STR trapSourceIp | 1.3.6.1.4.1.211.1.31.1.2.200.2.25 | DisplayString | not-accessible | |
| STR trapDestIp | 1.3.6.1.4.1.211.1.31.1.2.200.2.26 | DisplayString | not-accessible | |
| STR trapModelName | 1.3.6.1.4.1.211.1.31.1.2.200.2.27 | DisplayString | not-accessible | Model name of trap source. |
| STR trapFlagcode | 1.3.6.1.4.1.211.1.31.1.2.200.2.28 | DisplayString | not-accessible | |
| partitionEnterprise | 1.3.6.1.4.1.211.1.31.1.2.201 | |||
| psaComTrap | 1.3.6.1.4.1.211.1.31.1.2.201.1 | |||
| psaLinLanComTrap | 1.3.6.1.4.1.211.1.31.1.2.201.2 | |||
| psaLinIntelE100Trap | 1.3.6.1.4.1.211.1.31.1.2.201.3 | |||
| psaLinIntelE1000Trap | 1.3.6.1.4.1.211.1.31.1.2.201.4 | |||
| psaLinBcm5700Trap | 1.3.6.1.4.1.211.1.31.1.2.201.5 | |||
| psaLinEmulexTrap | 1.3.6.1.4.1.211.1.31.1.2.201.6 | |||
| NTF fcEvent0 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12000 | lpfc: Adapter or Software error (Dropping received ELS cmd) | ||
| NTF fcEvent1 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12001 | lpfc: Device error (An FLOGI ELS command was received in Loop Mode) | ||
| NTF fcEvent2 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12002 | lpfc: Device or FC-Network error (unknown ELS command received) | ||
| NTF fcEvent3 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12003 | lpfc: Device or FC-Network error (ELS timeout) | ||
| NTF fcEvent4 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12004 | lpfc: Adapter error (CONFIG_LINK bad hba state) | ||
| NTF fcEvent5 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12005 | lpfc: Device or FC-Network error (Nodev timeout) | ||
| NTF fcEvent6 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12006 | lpfc: FC-Network error (unknown Identifier in RSCN) | ||
| NTF fcEvent7 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12007 | lpfc: Adapter or FC-Network error (Initial FLOGI timeout) | ||
| NTF fcEvent8 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12008 | lpfc: Adapter or FC-Network error (Timeout while waiting for NameServer login) | ||
| NTF fcEvent9 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12009 | lpfc: Adapter or FC-Network error (NameServer query timeout) | ||
| NTF fcEvent14 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12014 | lpfc: Adapter or Device error (RegLogin failed) | ||
| NTF fcEvent15 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12015 | lpfc: Adapter error (stray mailbox interrupt mbxCommand) | ||
| NTF fcEvent16 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12016 | lpfc: Adapter error (CONFIG_LINK mbxStatus Error) | ||
| NTF fcEvent17 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12017 | lpfc: Adapter error (Mailbox command timeout) | ||
| NTF fcEvent18 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12018 | lpfc: Adapter or Software error (Ring handler) | ||
| NTF fcEvent20 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12020 | lpfc: Adapter or Software error (Ring issue) | ||
| NTF fcEvent21 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12021 | lpfc: Software error (Cmd ring put) | ||
| NTF fcEvent22 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12022 | lpfc: Software error (Rsp ring get) | ||
| NTF fcEvent23 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12023 | lpfc: Adapter error (READ_SPARM mbxStatus error) | ||
| NTF fcEvent24 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12024 | lpfc: Adapter error (CLEAR_LA mbxStatus error) | ||
| NTF fcEvent25 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12025 | lpfc: Adapter or Software error (unknown IOCB command) | ||
| NTF fcEvent26 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12026 | lpfc: Adapter or Software error (unknown Mailbox command) | ||
| NTF fcEvent27 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12027 | lpfc: Adapter error (Config Port initialization error) | ||
| NTF fcEvent28 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12028 | lpfc: Adapter or Software error (cannot find virtual addr for mapped buf on ring) | ||
| NTF fcEvent29 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12029 | lpfc: Adapter error (Adapter failed to init; timeout) | ||
| NTF fcEvent30 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12030 | lpfc: Adapter error (Adapter failed to init; chipset) | ||
| NTF fcEvent31 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12031 | lpfc: Adapter error (Adapter failed to init; chipset) | ||
| NTF fcEvent32 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12032 | lpfc: Adapter error (Adapter failed to init; mbxCmd READ_REV) | ||
| NTF fcEvent33 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12033 | lpfc: Adapter error (Adapter failed to init; mbxCmd READ_REV detected outdated firmware) | ||
| NTF fcEvent34 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12034 | lpfc: Adapter error (Adapter failed to init; mbxCmd CONFIG_PORT) | ||
| NTF fcEvent35 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12035 | lpfc: Adapter error (Adapter failed to init; mbxCmd CFG_RING) | ||
| NTF fcEvent36 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12036 | lpfc: Adapter error (Adapter failed init; mbxCmd CONFIG_LINK) | ||
| NTF fcEvent37 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12037 | lpfc: Adapter error (Adapter failed init; mbxCmd READ_SPARM) | ||
| NTF fcEvent38 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12038 | lpfc: Adapter or Software error (Enable interrupt handler failed) | ||
| NTF fcEvent39 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12039 | lpfc: Adapter error (Adapter failed to init; mbxCmd READ_CONFIG) | ||
| NTF fcEvent40 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12040 | lpfc: Adapter error (Adapter failed to mbxCmd INIT_LINK) | ||
| NTF fcEvent41 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12041 | lpfc: Adapter error (Adapter Hardware Error) | ||
| NTF fcEvent42 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12042 | lpfc: Adapter or Software error (Too many cmd / rsp ring entries in SLI2 SLIM) | ||
| NTF fcEvent46 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12046 | lpfc: Device or FC-network error (Re-establishing) | ||
| NTF fcEvent49 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12049 | lpfc: Adapter error (detected pci parity error) | ||
| NTF fcEvent50 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12050 | lpfc: Adapter error (detected pci parity error) | ||
| NTF fcEvent51 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12051 | lpfc: Adapter error (detected pci parity error) | ||
| NTF fcEvent52 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12052 | lpfc: Adapter error (detected pci parity error) | ||
| NTF fcEvent53 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12053 | lpfc: Software error (high priority IOCB timeout) | ||
| NTF fcEvent54 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12054 | lpfc: Software error (Illegal State Transition) | ||
| NTF fcEvent55 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12055 | lpfc: Software error (Outstanding I/O count) | ||
| NTF fcEvent56 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12056 | lpfc: Software error (IOCB timeout) | ||
| NTF fcEvent57 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12057 | lpfc: Adapter error (readl: Detect PCI parity error. Retrying) | ||
| NTF fcEvent58 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12058 | lpfc: Adapter error (readl: Retry succeeded) | ||
| NTF fcEvent59 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12059 | lpfc: Adapter error (readl: Detected PCI parity error. Retries exhausted) | ||
| NTF fcEvent60 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12060 | lpfc: Adapter error (writel: Couldn't read status register. Retrying) | ||
| NTF fcEvent61 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12061 | lpfc: Adapter error (writel: Detect PCI parity error. Retrying) | ||
| NTF fcEvent62 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12062 | lpfc: Adapter error (writel: Retry succeeded) | ||
| NTF fcEvent63 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12063 | lpfc: Adapter error (writel: Detected PCI parity error. Retries exhausted) | ||
| NTF fcEvent64 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12064 | lpfc: Adapter error (Suspect any fixed hardware failure) | ||
| NTF fcEvent65 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12065 | lpfc: Adapter error (writeb: Couldn't read status register. Retrying) | ||
| NTF fcEvent66 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12066 | lpfc: Adapter error (writeb: Detect PCI parity error. Retrying) | ||
| NTF fcEvent67 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12067 | lpfc: Adapter error (writeb: Retry succeeded) | ||
| NTF fcEvent68 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12068 | lpfc: Adapter error (writeb: Detected PCI parity error. Retries exhausted) | ||
| NTF fcEvent69 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12069 | lpfc: Adapter error (Resetting adapter) | ||
| NTF fcEvent70 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12070 | lpfc: Adapter error (Adapter reset failed) | ||
| NTF fcEvent71 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12071 | lpfc: Software error (FALLIOCANCEL failed: phba is NULL) | ||
| NTF fcEvent72 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12072 | lpfc: Software error (FALLIOCANCEL failed: LUN block failed) | ||
| NTF fcEvent73 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12073 | lpfc: Software error (FALLIOCANCEL failed: Abort failed(timeout). HBA resetting) | ||
| NTF fcEvent74 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12074 | lpfc: Software error (FIOMPACTIVE failed: phba is NULL) | ||
| NTF fcEvent75 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12075 | lpfc: Software error (FIOMPACTIVE failed: LUN unblock failed) | ||
| NTF fcEvent76 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12076 | lpfc: Software error (Device Discovery completion error) | ||
| NTF fcEvent77 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12077 | lpfc: Software error (Device Discovery completion error) | ||
| NTF fcEvent78 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12078 | lpfc: Adapter error (bigger then rsp ring) | ||
| NTF fcEvent79 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12079 | lpfc: Software error (IOCB wake NOT set) | ||
| NTF fcEvent80 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12080 | lpfc: Adapter error (Unknown IOCB command Data) | ||
| NTF fcEvent81 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12081 | lpfc: Adapter error (Unknown IOCB command Data) | ||
| NTF fcEvent82 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12082 | lpfc: Adapter error (IOCB wait timeout error) | ||
| NTF fcEvent83 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12083 | lpfc: Software error (Bus Reset on target failed) | ||
| NTF fcEvent84 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12084 | lpfc: Software error (Adapter failed to set maximum DMA length mbxStatus) | ||
| NTF fcEvent85 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12085 | lpfc: Software error (unexpected ASYNC_STATUS) | ||
| NTF fcEvent86 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12086 | lpfc: Adapter error (Adapter heartbeat failure; taking this port offline) | ||
| NTF fcEvent87 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12087 | lpfc: Adapter error (Adapter maximum temperature exceeded; taking this port offline) | ||
| NTF fcEvent88 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12088 | lpfc: Adapter or Software error (Unprocessed Host attention) | ||
| NTF fcEvent89 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12089 | lpfc: Adapter error (Adapter failed to mbxCmd CONFIG_HBQ) | ||
| NTF fcEvent90 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12090 | lpfc: Adapter or Device or FC-Network error (invalid service parameters) | ||
| NTF fcEvent91 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12091 | lpfc: Adapter error (Adapter failed to set maximum DMA length mbxStatus) | ||
| NTF fcEvent92 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12092 | lpfc: Device or FC-Network error (Invalid response length) | ||
| NTF fcEvent93 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12093 | lpfc: Adapter or Software error (Tgt Map rport failure) | ||
| NTF fcEvent94 | 1.3.6.1.4.1.211.1.31.1.2.201.6.0.12094 | lpfc: Adapter or Software error (Device Reset rport failure) | ||
| psaLinLsiLogicTrap | 1.3.6.1.4.1.211.1.31.1.2.201.7 | |||
| psaLinScsiComTrap | 1.3.6.1.4.1.211.1.31.1.2.201.8 | |||
| psaLinGrmpdTrap | 1.3.6.1.4.1.211.1.31.1.2.201.9 | |||
| psaLinGdsTrap | 1.3.6.1.4.1.211.1.31.1.2.201.10 | |||
| psaLinGlsTrap | 1.3.6.1.4.1.211.1.31.1.2.201.11 | |||
| psaLinTg3Trap | 1.3.6.1.4.1.211.1.31.1.2.201.12 | |||
| psaLinIbTrap | 1.3.6.1.4.1.211.1.31.1.2.201.13 | |||
| psaLinXframe2Trap | 1.3.6.1.4.1.211.1.31.1.2.201.14 | |||
| psaGschTrap | 1.3.6.1.4.1.211.1.31.1.2.201.15 | |||
| psaLinIntelE1000ETrap | 1.3.6.1.4.1.211.1.31.1.2.201.16 | |||
| psaLinIntelIgbTrap | 1.3.6.1.4.1.211.1.31.1.2.201.17 | |||
| psaLinSvsRaidTrap | 1.3.6.1.4.1.211.1.31.1.2.201.18 | |||
| psaExternalFileUnitTrap | 1.3.6.1.4.1.211.1.31.1.2.201.101 |
RFC description
Emulex HBA vendor MIB for Linux-based systems defining storage adapter trap and alert notifications.
Start monitoring Fujitsu PRIMEQUEST server partition, Linux, Emulex Fibre Channel HBA (driver fault traps) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.