PRVT-SYS-MON-MIB

All MIBs › PRVT-SYS-MON-MIB

Organization: BATM Advanced Communication

Last Updated: 2007-12-27

Category: System Management

Description: Monitors BATM Advanced Communication system health including CPU utilization, memory usage, temperature, and fan status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PRVT-SYS-MON-MIB?

PRVT-SYS-MON-MIB is a BATM Advanced Communications / Telco Systems private MIB (under prvt-products 111) for monitoring system health on their Ethernet/Fast Ethernet IP switches. It defines configurable alarm thresholds (cpuUtilizationThreshold, ramBytesFreeThreshold, portErrorsThreshold, portsBroadcastThreshold, portsCRCErrThreshold, portsRuntsThreshold, portsOverSizeThreshold, and per-port laserPortThresholdTable temperature/Tx/Rx power limits) alongside the live measured values checked against them — monCpuUtilization, monRamBytesFree, the monPortsTable (monPortErrors, monPortBroadcast, monPortCRCErr, monPortRunts, monPortOverSize), and the laserPortValueTable (sfpStatus, laserTemperature, laserTxPower, laserRxPower) for SFF-8472-compliant optics. When a threshold is crossed the device raises notifications such as cpuUtilizationExceeded and ramFreeSpaceExceeded, tying the current value and its threshold together in the trap. This makes it a proactive monitoring MIB rather than a passive counters MIB, designed to alert before CPU, memory, port-error, or optical-transceiver conditions become service-affecting. It depends on PRVT-SWITCH-MIB for its physical port index objects (reportsL2IfaceUnit/Slot/Port, reportsIfJackIndex). Anyone deploying BATM/Telco Systems switches can look for a PRVT-SYS-MON-MIB download to load these thresholds and notifications into their monitoring system.

IPNetwork Monitor allows you to monitor SNMP objects defined in PRVT-SYS-MON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

BATM Advanced Communications / Telco Systems Ethernet and Fast Ethernet IP switches

Monitoring Examples

An operator polls monCpuUtilization against cpuUtilizationThreshold and monPortCRCErr against portsCRCErrThreshold for each port; a monPortCRCErr value that climbs above the configured threshold, together with a received CRC-error notification, flags a switch port with a failing cable or optic before it starts dropping significant traffic.

What Can Be Monitored

CPU utilization vs. threshold
free RAM vs. threshold
per-port error/broadcast/CRC/runt/oversize rate vs. thresholds
SFP/laser temperature and Tx/Rx power vs. thresholds
threshold-exceeded notifications

Imported Objects

From PRVT-SWITCH-MIB

prvt-products
reportsIfJackIndex	OBJECT-TYPE
reportsL2IfacePort	OBJECT-TYPE
reportsL2IfaceSlot	OBJECT-TYPE
reportsL2IfaceUnit	OBJECT-TYPE

From SNMPv2-CONF

NOTIFICATION-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
software	1.3.6.1.4.1.738.1.111
prvtSysMonMib	1.3.6.1.4.1.738.1.111.3			Information for system resources
prvtSysMonNotifications	1.3.6.1.4.1.738.1.111.3.0
NTF cpuUtilizationExceeded	1.3.6.1.4.1.738.1.111.3.0.1			The cpuUtilizationExceeded notification indicates that the sending agent sense that the CPU utilization has passed the program threshold.
NTF ramFreeSpaceExceeded	1.3.6.1.4.1.738.1.111.3.0.2			The ramFreeSpaceExceeded notification indicates that the sending agent sense that the system memory utilization has passed the program threshold.
NTF portErrorsExceeded	1.3.6.1.4.1.738.1.111.3.0.3			The portErrorsExceeded notification indicates that the sending agent sense that the level of errors on the port has passed the program threshold.
NTF portsBroadcastExceeded	1.3.6.1.4.1.738.1.111.3.0.4			The portsBroadcastExceeded notification indicates that the sending agent sense that the level of broadcast-limit has passed the program threshold.
NTF portsCRCErrExceeded	1.3.6.1.4.1.738.1.111.3.0.5			The portsCRCErrExceeded notification indicates that the sending agent sense that the level of CRC error has passed the program threshold.
NTF portsRuntsExceeded	1.3.6.1.4.1.738.1.111.3.0.6			The portsRuntsExceeded notification indicates that the sending agent sense that the level of runts has passed the program threshold.
NTF portsOverSizeExceeded	1.3.6.1.4.1.738.1.111.3.0.7			The portsOverSizeExceeded notification indicates that the sending agent sense that the level of oversize has passed the program threshold.
NTF laserTemperatureThresholdCrossed	1.3.6.1.4.1.738.1.111.3.0.8			The laserTemperatureThresholdCrossed shall be generated when laserTemperature rises above laserHighTemperatureThreshold or falls below laserTemperatureLowThreshold. Also the notification shall be generated when laserTemperature returns to the normal range between laserHighTemperatureThreshold and laserTemperatureLowThreshold.
NTF laserTxPowerThresholdCrossed	1.3.6.1.4.1.738.1.111.3.0.9			The laserTxPowerThresholdCrossed shall be generated when laserTxPower rises above laserHighTxPowerThreshold or falls below laserTxPowerLowThreshold. Also the notification shall be generated when laserTxPower returns to the normal range between laserHighTxPowerThreshold and laserTxPowerLowThreshold.
NTF laserRxPowerThresholdCrossed	1.3.6.1.4.1.738.1.111.3.0.10			The laserRxPowerThresholdCrossed shall be generated when laserRxPower rises above laserHighRxPowerThreshold or falls below laserRxPowerLowThreshold. Also the notification shall be generated when laserRxPower returns to the normal range between laserHighRxPowerThreshold and laserRxPowerLowThreshold.
NTF sfpMonStatusChanged	1.3.6.1.4.1.738.1.111.3.0.11			This trap will be send only if the SFP is inserted or extracted
prvtSysMonObjects	1.3.6.1.4.1.738.1.111.3.1
sysMonThreshold	1.3.6.1.4.1.738.1.111.3.1.1
I32 cpuUtilizationThreshold	1.3.6.1.4.1.738.1.111.3.1.1.1	Integer32	read-only	High limit in percent of normal CPU utilization
I32 ramBytesFreeThreshold	1.3.6.1.4.1.738.1.111.3.1.1.2	Integer32	read-only	Low limit in bytes free in the system memory
I32 portErrorsThreshold	1.3.6.1.4.1.738.1.111.3.1.1.3	Integer32	read-only	High limit in percent of communication errors on port
I32 portsBroadcastThreshold	1.3.6.1.4.1.738.1.111.3.1.1.4	Integer32	read-only	High limit in percent of exceeding broadcast-limit on port
I32 portsCRCErrThreshold	1.3.6.1.4.1.738.1.111.3.1.1.5	Integer32	read-only	High limit in percent of exceeding CRC error on port
I32 portsRuntsThreshold	1.3.6.1.4.1.738.1.111.3.1.1.6	Integer32	read-only	High limit in percent of exceeding runts on port
I32 portsOverSizeThreshold	1.3.6.1.4.1.738.1.111.3.1.1.7	Integer32	read-only	High limit in percent of exceeding over-size on port
laserPortThresholdTable	1.3.6.1.4.1.738.1.111.3.1.1.8		not-accessible	Defines thresholds for each port in the device
laserPortThresholdEntry	1.3.6.1.4.1.738.1.111.3.1.1.8.1		not-accessible
I32 laserTemperatureHighThreshold	1.3.6.1.4.1.738.1.111.3.1.1.8.1.1	Integer32	read-write	Configures high temperature threshold. The range is -128 to 128. The accuracy is 1C.
I32 laserTemperatureLowThreshold	1.3.6.1.4.1.738.1.111.3.1.1.8.1.2	Integer32	read-write	Configures low temperature threshold. The range is -128 to 128. The accuracy is 1C.
I32 laserTxPowerHighThreshold	1.3.6.1.4.1.738.1.111.3.1.1.8.1.3	Integer32	read-write	Configures Tx power high threshold. The range is -40 to 8.
I32 laserTxPowerLowThreshold	1.3.6.1.4.1.738.1.111.3.1.1.8.1.4	Integer32	read-write	Configures Tx power low threshold. The range is -40 to 8.
I32 laserRxPowerHighThreshold	1.3.6.1.4.1.738.1.111.3.1.1.8.1.5	Integer32	read-write	Configures Rx power high threshold. The range is -40 to 8.
I32 laserRxPowerLowThreshold	1.3.6.1.4.1.738.1.111.3.1.1.8.1.6	Integer32	read-write	Configures Rx power low threshold. The range is -40 to 8.
sysMonValues	1.3.6.1.4.1.738.1.111.3.1.2
I32 monCpuUtilization	1.3.6.1.4.1.738.1.111.3.1.2.1	Integer32	read-only	The current level in percent of CPU utilization
I32 monRamBytesFree	1.3.6.1.4.1.738.1.111.3.1.2.2	Integer32	accessible-for-notify	The number of bytes currently free in the system memory
monPortsTable	1.3.6.1.4.1.738.1.111.3.1.2.3		not-accessible	Defines the ports monitor Table for providing, via SNMP, the last sampled parameters by the periodic monitor
monPortsEntry	1.3.6.1.4.1.738.1.111.3.1.2.3.1		not-accessible	Defines an entry in the monPortsTable. The entries are indexed by the physical location of the port in the device.
I32 monPortErrors	1.3.6.1.4.1.738.1.111.3.1.2.3.1.1	Integer32	accessible-for-notify	The percentages of errors on the port that generated the notification.
I32 monPortBroadcast	1.3.6.1.4.1.738.1.111.3.1.2.3.1.2	Integer32	accessible-for-notify	The percentages of packets exceeding broadcast-limit on the port that generated the notification.
I32 monPortCRCErr	1.3.6.1.4.1.738.1.111.3.1.2.3.1.3	Integer32	accessible-for-notify	The percentage of CRC errors on the port that generated the notification.
I32 monPortRunts	1.3.6.1.4.1.738.1.111.3.1.2.3.1.4	Integer32	accessible-for-notify	The percentage of runt packets on the port that generated the notification.
I32 monPortOverSize	1.3.6.1.4.1.738.1.111.3.1.2.3.1.5	Integer32	accessible-for-notify	The percentage of over-size packets on the port that generated the notification.
laserPortValueTable	1.3.6.1.4.1.738.1.111.3.1.2.4		not-accessible	This table displays the current laser-related values for each port in the device.
laserPortValueEntry	1.3.6.1.4.1.738.1.111.3.1.2.4.1		not-accessible
INT sfpStatus	1.3.6.1.4.1.738.1.111.3.1.2.4.1.1	INTEGER	read-only	If value of this field is not supported, then the values of other fields are not relevant. The value is supported only if SFP compliant with SFF-8472 is inserted.
I32 laserTemperature	1.3.6.1.4.1.738.1.111.3.1.2.4.1.2	Integer32	read-only	Represents module temperature. The range is -128 to 128. The accuracy is 1C.
I32 laserTxPower	1.3.6.1.4.1.738.1.111.3.1.2.4.1.3	Integer32	read-only	Represents Tx power. The range is -40 to 8.
I32 laserRxPower	1.3.6.1.4.1.738.1.111.3.1.2.4.1.4	Integer32	read-only	Represents Rx power. The range is -40 to 8.
sfpPortManTable	1.3.6.1.4.1.738.1.111.3.1.2.5		not-accessible	This table will be responsible for managing SFPs.
sfpPortManEntry	1.3.6.1.4.1.738.1.111.3.1.2.5.1		not-accessible
INT sfpMonStatus	1.3.6.1.4.1.738.1.111.3.1.2.5.1.1	INTEGER	read-only	This object gives information is SFP is inserted or not in the port.
STR sfpVendor	1.3.6.1.4.1.738.1.111.3.1.2.5.1.2	DisplayString	read-only	This object gives SFP vendor name.
STR sfpPN	1.3.6.1.4.1.738.1.111.3.1.2.5.1.3	DisplayString	read-only	This object gives SFP vendor name.
STR sfpRevision	1.3.6.1.4.1.738.1.111.3.1.2.5.1.4	DisplayString	read-only	This object gives SFP vendor revision.
STR sfpLenght	1.3.6.1.4.1.738.1.111.3.1.2.5.1.5	DisplayString	read-only	This object gives information regarding link length.
STR sfpConnector	1.3.6.1.4.1.738.1.111.3.1.2.5.1.6	DisplayString	read-only	This object gives SFP connector type.
sysMonConfig	1.3.6.1.4.1.738.1.111.3.1.3
sysMonConfigTable	1.3.6.1.4.1.738.1.111.3.1.3.1		not-accessible	This table configures periodic monitoring parameters.
sysMonConfigEntry	1.3.6.1.4.1.738.1.111.3.1.3.1.1		not-accessible
INT sysMonIndicator	1.3.6.1.4.1.738.1.111.3.1.3.1.1.1	INTEGER	read-only	Enumeration.
ENA sysMonEnable	1.3.6.1.4.1.738.1.111.3.1.3.1.1.2	EnableStatus	read-write	Enabled/disabled
I32 sysMonPeriod	1.3.6.1.4.1.738.1.111.3.1.3.1.1.3	Integer32	read-write	Configure monitoring period in seconds.
ENA sysMonTrap	1.3.6.1.4.1.738.1.111.3.1.3.1.1.4	EnableStatus	read-write	Enabled/disabled
ENA sysMonLog	1.3.6.1.4.1.738.1.111.3.1.3.1.1.5	EnableStatus	read-write	Enabled/disabled
ENA sysMonLed	1.3.6.1.4.1.738.1.111.3.1.3.1.1.6	EnableStatus	read-write	Enabled/disabled
INT sysMonDefaults	1.3.6.1.4.1.738.1.111.3.1.3.1.1.7	INTEGER	read-write	If set to 1, resets all configurations to defaults.
prvtSysMonConformance	1.3.6.1.4.1.738.1.111.3.2
sysMonMIBGroups	1.3.6.1.4.1.738.1.111.3.2.2
sysMonNotificationGroup	1.3.6.1.4.1.738.1.111.3.2.2.3			Private Notification Group.

RFC description

Monitors system resources including CPU, memory, ports, and laser status on network devices.

Start monitoring BATM Advanced Communications / Telco Systems Ethernet and Fast Ethernet IP switches (system health thresholds) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PRVT-SYS-MON-MIB

What Is PRVT-SYS-MON-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description