All MIBs › POWERCONNECT3048-MIB
Category: Switching
Description: Manages the Dell PowerConnect 3048 switch, covering port configuration, forwarding database, and VLAN management objects.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is POWERCONNECT3048-MIB?
POWERCONNECT3048-MIB is a Dell PowerConnect 3048 switch proprietary MIB (enterprise OID 674) managing SNMP community strings, trap-host destinations, and basic system/spanning-tree control. Its objects cover a community table (name, get/set/trap permissions, status), a trap-host table (IP, community, status, authorization), serial baud rate, system/statistics reset actions, switch operational state, spanning-tree on/off, and software/hardware chip-set version and boot mode/FTP-server configuration. As a configuration/status MIB it lets an administrator confirm which SNMP communities and trap destinations are configured on a PowerConnect 3048 switch. It is deployed on the Dell PowerConnect 3048 switch. Engineers can download the POWERCONNECT3048-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in POWERCONNECT3048-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Dell PowerConnect 3048 switch
Monitoring Examples
An administrator checks hostTable and commTable to confirm which trap destination and SNMP community are configured on a Dell PowerConnect 3048 switch.
What Can Be Monitored
- SNMP community/trap-host configuration
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| IpAddress | |
| TimeTicks | |
| enterprises |
From RFC1213-MIB
| DisplayString | |
| PhysAddress | |
| mib-2 |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| dell | 1.3.6.1.4.1.674 | |||
| NTF addressIntrusion | 1.3.6.1.4.1.674.0.0 | An addressIntrusion trap signifies that an unauthorized address has been seen on the network. | ||
| dellLan | 1.3.6.1.4.1.674.10895 | |||
| powerconnect3048 | 1.3.6.1.4.1.674.10895.5 | |||
| dellCommGroup | 1.3.6.1.4.1.674.10895.5.1 | |||
| commTable | 1.3.6.1.4.1.674.10895.5.1.1 | not-accessible | A list of SNMP Community Entries | |
| commEntry | 1.3.6.1.4.1.674.10895.5.1.1.1 | not-accessible | A list of SNMP Community properties | |
| INT commIndex | 1.3.6.1.4.1.674.10895.5.1.1.1.1 | INTEGER | read-only | An index that uniquely identifies an entry in the Community Table. Eight entries are currently supported. |
| STR commName | 1.3.6.1.4.1.674.10895.5.1.1.1.2 | DisplayString | read-write | The name of this SNMP Community Entry. |
| INT commGet | 1.3.6.1.4.1.674.10895.5.1.1.1.3 | INTEGER | read-write | The GET permission for the community. A (1) indicates a GET enable. A (2) indicates a GET disable. |
| INT commSet | 1.3.6.1.4.1.674.10895.5.1.1.1.4 | INTEGER | read-write | The SET permission for the community. A (1) indicates a SET enable. A (2) indicates a SET disable. |
| INT commTrap | 1.3.6.1.4.1.674.10895.5.1.1.1.5 | INTEGER | read-write | The TRAP permission for the community. A (1) indicates a TRAP enable. A (2) indicates a TRAP disable. |
| INT commStatus | 1.3.6.1.4.1.674.10895.5.1.1.1.6 | INTEGER | read-write | The RowStatus for the community entry. |
| dellHostGroup | 1.3.6.1.4.1.674.10895.5.2 | |||
| hostTable | 1.3.6.1.4.1.674.10895.5.2.1 | not-accessible | A list of SNMP Trusted Host Entries | |
| hostEntry | 1.3.6.1.4.1.674.10895.5.2.1.1 | not-accessible | A list of SNMP Host properties | |
| INT hostIndex | 1.3.6.1.4.1.674.10895.5.2.1.1.1 | INTEGER | read-only | An index that uniquely identifies an entry in the Host Table. Sixteen entries are currently supported. |
| STR hostName | 1.3.6.1.4.1.674.10895.5.2.1.1.2 | DisplayString | read-write | The name of this Host Entry. |
| IP hostIP | 1.3.6.1.4.1.674.10895.5.2.1.1.3 | IpAddress | read-write | The IP Address for the host. |
| STR hostComm | 1.3.6.1.4.1.674.10895.5.2.1.1.4 | DisplayString | read-write | The name of the community this host belongs to. |
| INT hostStatus | 1.3.6.1.4.1.674.10895.5.2.1.1.5 | INTEGER | read-write | The RowStatus for the community entry. |
| INT hostAuthorization | 1.3.6.1.4.1.674.10895.5.2.2 | INTEGER | read-write | If enabled, the host must be in the hostTable in order to access the device via SNMP. |
| dellMiscGroup | 1.3.6.1.4.1.674.10895.5.3 | |||
| INT miscBaud | 1.3.6.1.4.1.674.10895.5.3.1 | INTEGER | read-only | The Serial port BAUD Rate. |
| INT miscReset | 1.3.6.1.4.1.674.10895.5.3.2 | INTEGER | read-write | Physically resets the unit - use with care. A (1) resets the unit, a (2) does nothing. |
| INT miscStatisticsReset | 1.3.6.1.4.1.674.10895.5.3.3 | INTEGER | read-write | Resets the units statistics. A (1) resets the unit, a (2) does nothing. |
| INT miscSwitchOperState | 1.3.6.1.4.1.674.10895.5.3.4 | INTEGER | read-only | Global operation state of the switch. |
| dellSpanGroup | 1.3.6.1.4.1.674.10895.5.4 | |||
| INT spanOnOff | 1.3.6.1.4.1.674.10895.5.4.1 | INTEGER | read-write | Enable/Disable Spanning Tree. A (1) enables, a (2) disables. |
| dellConfigGroup | 1.3.6.1.4.1.674.10895.5.11 | |||
| STR configVerSwPrimary | 1.3.6.1.4.1.674.10895.5.11.1 | DisplayString | read-only | The software image version string |
| STR configVerHwChipSet | 1.3.6.1.4.1.674.10895.5.11.2 | DisplayString | read-only | The hardware chipset version string |
| INT configBootMode | 1.3.6.1.4.1.674.10895.5.11.3 | INTEGER | read-write | Defines the method used for downloading the image when reset. |
| IP configBootFtpServerIp | 1.3.6.1.4.1.674.10895.5.11.4 | IpAddress | read-write | The FTP server's IP address used for downloading the boot image |
| STR configBootImageFileName | 1.3.6.1.4.1.674.10895.5.11.5 | DisplayString | read-write | The path and filename of the boot image to download |
| configPortTable | 1.3.6.1.4.1.674.10895.5.11.6 | not-accessible | A list of interface entries used for enterprise specific configuration. The number of entries is given by the value of ifNumber. All interface entries are assumed to be Ethernet interafaces. | |
| configPortEntry | 1.3.6.1.4.1.674.10895.5.11.6.1 | not-accessible | An enterprise specific interface entry. | |
| INT configPort | 1.3.6.1.4.1.674.10895.5.11.6.1.1 | INTEGER | read-write | A unique value for each interface that correlates to ifIndex. Its value ranges between 1 and the value of ifNumber. |
| INT configPortDuplex | 1.3.6.1.4.1.674.10895.5.11.6.1.3 | INTEGER | read-write | The port's duplex desired state. |
| INT configPortRuntFilt | 1.3.6.1.4.1.674.10895.5.11.6.1.4 | INTEGER | read-write | Defines whether the port will drop runt packets |
| INT configPortSrcSecurity | 1.3.6.1.4.1.674.10895.5.11.6.1.5 | INTEGER | read-write | The desired state for an interface's source security. |
| INT configPortDataRate | 1.3.6.1.4.1.674.10895.5.11.6.1.6 | INTEGER | read-write | The port's desired transmission data rate. |
| INT configForwardingMode | 1.3.6.1.4.1.674.10895.5.11.6.1.7 | INTEGER | read-write | Indicates whether the packets will receive the entire packet before forwarding. 'store-and-forward' receives the entire packet before forwarding. 'cut-through' may forward the packet before the entire packet is received. |
| INT configPortDuplexOper | 1.3.6.1.4.1.674.10895.5.11.6.1.8 | INTEGER | read-only | The port's duplex state. |
| INT configPortDataRateOper | 1.3.6.1.4.1.674.10895.5.11.6.1.9 | INTEGER | read-only | The port's transmission data rate. |
| INT configPortStateOper | 1.3.6.1.4.1.674.10895.5.11.6.1.10 | INTEGER | read-only | The port's current state. |
| INT configPortFlowControl | 1.3.6.1.4.1.674.10895.5.11.6.1.11 | INTEGER | read-write | The port will avoid transmitting a new packet for the period of time specified in a received PAUSE packet when enabled. |
| INT configPortDefaultVlanId | 1.3.6.1.4.1.674.10895.5.11.6.1.12 | INTEGER | read-write | The port will add this vlan id tag to any incoming packet which is lacking a vlan id tag. |
| STR configPortComments | 1.3.6.1.4.1.674.10895.5.11.6.1.13 | DisplayString | read-write | May contain any comments related to a given port such as a user name or LAN segment. |
| INT configPortAutoNegotiation | 1.3.6.1.4.1.674.10895.5.11.6.1.14 | INTEGER | read-write | The port will perform auto-negotiation to determine the port's duplex and data rate. When auto-negotiation is enabled, the negotiated duplex and data rate can be determined by configPortDuplexOper and configPortDataRateOper mib objects respectively. |
| INT configPortHOLBlocking | 1.3.6.1.4.1.674.10895.5.11.6.1.15 | INTEGER | read-write | When enabled, the port will prevent head-of-line blocking from occuring. If the current port is to forward a packet to a port which is beleived to be blocked, the packet will be dropped instead of forwarded. |
| INT configPortFlowControlOper | 1.3.6.1.4.1.674.10895.5.11.6.1.16 | INTEGER | read-only | The port's current flow control state. |
| INT configPortGBIC | 1.3.6.1.4.1.674.10895.5.11.6.1.17 | INTEGER | read-write | Port Type. |
| INT configPortFastLink | 1.3.6.1.4.1.674.10895.5.11.6.1.18 | INTEGER | read-write | The port's FastLink option. |
| INT configPortPriority | 1.3.6.1.4.1.674.10895.5.11.6.1.19 | INTEGER | read-write | The port's current flow control state. |
| INT configRmonOnOff | 1.3.6.1.4.1.674.10895.5.11.7 | INTEGER | read-write | Enable or disable Remote Montioring, RMON. |
| INT configMirroringOnOff | 1.3.6.1.4.1.674.10895.5.11.8 | INTEGER | read-write | Enable or disable port mirroring. |
| INT configMirrorSrc | 1.3.6.1.4.1.674.10895.5.11.9 | INTEGER | read-write | When mirroring is enabled (configMirroringOnOff = enabled), this identifies the mirroring source port. This value has a valid range of 1 to ifNumber when enbaled. |
| INT configMirrorMon | 1.3.6.1.4.1.674.10895.5.11.10 | INTEGER | read-write | When mirroring is enabled (configMirroringOnOff = enabled), this identifies the mirroring monitoring port. This value has a valid range of 1 to ifNumber when enabled. |
| INT configIpAssignmentMode | 1.3.6.1.4.1.674.10895.5.11.12 | INTEGER | read-write | Indicates whether the device address is assigned by the user (manual), BootP, or DHCP. |
| MAC configPhysAddress | 1.3.6.1.4.1.674.10895.5.11.13 | MacAddress | read-only | The interface's address at the protocol layer immediately 'below' the network layer in the protocol stack. This is the physical address for the end-station. |
| STR configPasswordUser | 1.3.6.1.4.1.674.10895.5.11.14 | DisplayString | write-only | The user password. |
| STR configPasswordAdmin | 1.3.6.1.4.1.674.10895.5.11.15 | DisplayString | write-only | The adminstrator password |
| IP configIpAddress | 1.3.6.1.4.1.674.10895.5.11.16 | IpAddress | read-write | The IP Address for the RDU box. |
| IP configNetMask | 1.3.6.1.4.1.674.10895.5.11.17 | IpAddress | read-write | The network mask for the RDU box. |
| IP configGateway | 1.3.6.1.4.1.674.10895.5.11.18 | IpAddress | read-write | The Gatway Address for the RDU box. |
| INT configSave | 1.3.6.1.4.1.674.10895.5.11.19 | INTEGER | read-write | Physically saves the current configuration to nvram. - use with care. (1) saves the configuration (2) does nothing. |
| STR configVerifyPassword | 1.3.6.1.4.1.674.10895.5.11.20 | DisplayString | write-only | Verify the password is valid. If invalid a BAD_VALUE error is returned. |
| STR configVerBootRomImage | 1.3.6.1.4.1.674.10895.5.11.21 | DisplayString | read-only | The Boot ROM version string |
| INT configRestoreDefaults | 1.3.6.1.4.1.674.10895.5.11.22 | INTEGER | read-write | Restores the configuration of the unit to the original settings. |
| INT configIGMPOnOff | 1.3.6.1.4.1.674.10895.5.11.23 | INTEGER | read-write | Enable or disable the IGMP protocol within the switch. |
| INT configWebOnOff | 1.3.6.1.4.1.674.10895.5.11.24 | INTEGER | read-write | Enable or disable the Web Interface. |
| INT configHighPriorityOptimization | 1.3.6.1.4.1.674.10895.5.11.25 | INTEGER | read-write | Enable or disable high priority optimization. |
| INT configDynamicAddressLearning | 1.3.6.1.4.1.674.10895.5.11.26 | INTEGER | read-write | The ablility to learn dynamic addresses automatically. With this parameter disabled, a new address detected on a port will cause that port to be disabled, force a configuration save, and issue a trap alerting management stations of the intrusion. |
| INT configUserAuthenticationMode | 1.3.6.1.4.1.674.10895.5.11.27 | INTEGER | read-write | Determines whether the user password will be authenticated by the switch, a remote RADIUS server, or some combination of the two. |
| IP configRadiusServerIpAddress | 1.3.6.1.4.1.674.10895.5.11.28 | IpAddress | read-write | The IP Address of the RADIUS server used for remote user authentication. |
| STR configRadiusSharedSecret | 1.3.6.1.4.1.674.10895.5.11.29 | DisplayString | read-write | A string of characters used in the RADIUS password encryption process. |
| INT configTelnetConsole | 1.3.6.1.4.1.674.10895.5.11.30 | INTEGER | read-write | Enable or disable the telnet console. |
| configDiffServTable | 1.3.6.1.4.1.674.10895.5.11.31 | not-accessible | A list of DSCP Priorities. | |
| configDiffServEntry | 1.3.6.1.4.1.674.10895.5.11.31.1 | not-accessible | An enterprise specific DSCP entry. | |
| INT configDiffServDSCP | 1.3.6.1.4.1.674.10895.5.11.31.1.1 | INTEGER | read-only | A DSCP value. |
| INT configDiffServPriority | 1.3.6.1.4.1.674.10895.5.11.31.1.2 | INTEGER | read-write | The DSCP's current priority setting. |
| IP configTftpServerIpAddress | 1.3.6.1.4.1.674.10895.5.11.32 | IpAddress | read-write | The IP Address of the tftp server used to upload and download configuration files. This object is to be used in conjunction with configTftpServerFileName and configTftpOperation. |
| STR configTftpServerFileName | 1.3.6.1.4.1.674.10895.5.11.33 | DisplayString | read-write | The filename, including the path, used to store or retrieve a configuration file from the tftp server. This object is to be used in conjunction with configTftpServerIpAddress and configTftpOperation. |
| INT configTftpOperation | 1.3.6.1.4.1.674.10895.5.11.34 | INTEGER | read-write | The tftp operation to perform. Either download a configuration to the unit or upload the current configuration to the tftp server. This object is to be used in conjunction with configTftpServerIpAddress and configTftpServerFileName. |
| INT configIpFilter | 1.3.6.1.4.1.674.10895.5.11.35 | INTEGER | read-write | Determines if access to the device is limited to only those IP addresses specified in the configIpFilterTable. |
| configIpFilterTable | 1.3.6.1.4.1.674.10895.5.11.36 | not-accessible | A list of IP addresses allowed access to this device. | |
| configIpFilterEntry | 1.3.6.1.4.1.674.10895.5.11.36.1 | not-accessible | An enterprise specific IP filter entry. | |
| IP configIpFilterIpAddress | 1.3.6.1.4.1.674.10895.5.11.36.1.1 | IpAddress | read-only | An IP address which is allowed access to this device. |
| INT configIpFilterStatus | 1.3.6.1.4.1.674.10895.5.11.36.1.2 | INTEGER | read-write | The status of an entry in the IP filter Table. Only a subset of the rowstatus variables (active, destroy) are available. |
| dellVlanGroup | 1.3.6.1.4.1.674.10895.5.13 | |||
| vlanTable | 1.3.6.1.4.1.674.10895.5.13.1 | not-accessible | A list of the VLANs | |
| vlanEntry | 1.3.6.1.4.1.674.10895.5.13.1.1 | not-accessible | A VLAN entry containing the VLAN id and name. | |
| INT vlanId | 1.3.6.1.4.1.674.10895.5.13.1.1.1 | INTEGER | read-only | The VLAN identifier. A maximum of 16 VLANs is supported. The value must be from 0 to 4095. |
| STR vlanName | 1.3.6.1.4.1.674.10895.5.13.1.1.2 | DisplayString | read-write | The VLAN name associated with the VLAN Id. |
| INT vlanStatus | 1.3.6.1.4.1.674.10895.5.13.1.1.3 | INTEGER | read-write | The status of an entry in the VLAN Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available. |
| vlanPortTable | 1.3.6.1.4.1.674.10895.5.13.2 | not-accessible | A list of ports and their associated VLAN. | |
| vlanPortEntry | 1.3.6.1.4.1.674.10895.5.13.2.1 | not-accessible | Information pertaining to an individual port regarding to which VLAN it belongs. | |
| INT vlanPortPortId | 1.3.6.1.4.1.674.10895.5.13.2.1.1 | INTEGER | read-only | A port identifier that is in the range of 1 to ifNumber. |
| INT vlanPortVlanId | 1.3.6.1.4.1.674.10895.5.13.2.1.2 | INTEGER | read-only | The VLAN identifier. |
| INT vlanPortStatus | 1.3.6.1.4.1.674.10895.5.13.2.1.3 | INTEGER | read-write | The status of this port's association within this VLAN. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available. |
| INT vlanPortTaggedMode | 1.3.6.1.4.1.674.10895.5.13.2.1.4 | INTEGER | read-write | The tagged mode of a VLAN port. |
| dellPortTrunkGroup | 1.3.6.1.4.1.674.10895.5.14 | |||
| portTrunkTable | 1.3.6.1.4.1.674.10895.5.14.1 | not-accessible | A list of port trunks and their associated members. | |
| portTrunkEntry | 1.3.6.1.4.1.674.10895.5.14.1.1 | not-accessible | A port trunk entry containing the trunk id and trunk members. | |
| INT portTrunkId | 1.3.6.1.4.1.674.10895.5.14.1.1.1 | INTEGER | read-only | The port trunk identifier. The current range is from 1 to 4. |
| INT portTrunkMember | 1.3.6.1.4.1.674.10895.5.14.1.1.2 | INTEGER | read-only | A port trunk has four members. |
| INT portTrunkMemberValue | 1.3.6.1.4.1.674.10895.5.14.1.1.3 | INTEGER | read-write | A port trunk member value indicates which port is a member of the specified trunk. Valid values are in the range from 0 to ifNumber. A zero indicates that no port is contained in the specifed member. |
RFC description
Provides management and configuration objects for Dell PowerConnect 3048 network switches.
Start monitoring Dell PowerConnect 3048 switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.