POWERCONNECT3048-MIB :: hostAuthorization

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsPOWERCONNECT3048-MIBhostAuthorization

hostAuthorization

Module: POWERCONNECT3048-MIB

OID (symbolic): POWERCONNECT3048-MIB::hostAuthorization

OID (numeric): 1.3.6.1.4.1.674.10895.5.2.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: If enabled, the host must be in the hostTable in order to access the device via SNMP.

What is hostAuthorization?

When enabled, only hosts listed in the hostTable are permitted to access the switch via SNMP; when disabled, any host with a valid community string can connect. Admins turn this on to lock down management access to a known set of IP addresses.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.5.2.2
snmpwalk -v2c -c public <target> POWERCONNECT3048-MIB::hostAuthorization

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.5.2.2.1
snmpget -v2c -c public <target> POWERCONNECT3048-MIB::hostAuthorization.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10895.5.2.2.1 i <value>

Start monitoring Dell PowerConnect 3048 switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the POWERCONNECT3048-MIB::hostAuthorization OID value, configure state conditions and alerts, and monitor any Dell PowerConnect 3048 switch from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.674dellArrayManager-MIB
1.3.6.1.4.1.674.10895dellLanDell-Vendor-MIB
Numeric OIDNameModule
1.3.6.1.4.1.674.10895.5powerconnect3048POWERCONNECT3048-MIB
1.3.6.1.4.1.674.10895.5.2dellHostGroupPOWERCONNECT3048-MIB
1.3.6.1.4.1.674.10895.5.2.2hostAuthorizationPOWERCONNECT3048-MIB