| OID symbolic | OID numeric | Type | Access | Description |
|---|
| pktcMtaMib | 1.3.6.1.4.1.4491.2.2.1 | | | This MIB module supplies the basic management objects
for the MTA Device. |
| pktcMtaMibObjects | 1.3.6.1.4.1.4491.2.2.1.1 | | | |
| pktcMtaDevBase | 1.3.6.1.4.1.4491.2.2.1.1.1 | | | |
| T/F pktcMtaDevResetNow | 1.3.6.1.4.1.4491.2.2.1.1.1.1 | TruthValue | read-write | Setting this object to true(1) causes the device to reset.
Reading this object always returns false(2). |
| STR pktcMtaDevSerialNumber | 1.3.6.1.4.1.4491.2.2.1.1.1.2 | DisplayString | read-only | The manufacturer's serial number for this MTA. |
| STR pktcMtaDevHardwareVersion | 1.3.6.1.4.1.4491.2.2.1.1.1.3 | DisplayString | read-only | The manufacturer's hardware version for this MTA. |
| OCT pktcMtaDevMacAddress | 1.3.6.1.4.1.4491.2.2.1.1.1.4 | OCTET STRING | read-only | The telephony MAC address for this device. |
| STR pktcMtaDevFQDN | 1.3.6.1.4.1.4491.2.2.1.1.1.5 | DisplayString | read-write | The Fully Qualified Domain Name for this MTA. |
| INT pktcMtaDevEndPntCount | 1.3.6.1.4.1.4491.2.2.1.1.1.6 | INTEGER | read-only | The physical end points for this MTA. |
| T/F pktcMtaDevEnabled | 1.3.6.1.4.1.4491.2.2.1.1.1.7 | TruthValue | read-write | The MTA Admin Status of this device, where True(1) means
the voice feature is enabled and false(2) indicates that
it is disabled. |
| STR pktcMtaDevTypeIdentifier | 1.3.6.1.4.1.4491.2.2.1.1.1.8 | DisplayString | read-only | This is a copy of the device type identifier used in the
DHCP option 60 exchanged between the MTA and the DHCP server. |
| INT pktcMtaDevProvisioningState | 1.3.6.1.4.1.4491.2.2.1.1.1.9 | INTEGER | read-only | This object indicates the completion state of the
provisioning process. Pass or Fail states occur after processing
of the config file is completed. InProgress occurs from boot
time until config file processing is complete. Fail state requires
manual intervention. |
| T/F pktcMtaDevHttpAccess | 1.3.6.1.4.1.4491.2.2.1.1.1.10 | TruthValue | read-only | This indicates whether HTTP file access is supported for
MTA configuration file transfer. |
| pktcMtaDevServer | 1.3.6.1.4.1.4491.2.2.1.1.2 | | | |
| INT pktcMtaDevServerBootState | 1.3.6.1.4.1.4491.2.2.1.1.2.1 | INTEGER | read-only | If operational(1), the device has completed loading and
processing of configuration parameters and the Access Node has
completed the Registration exchange.
If disabled(2) then the device was administratively
disabled, possibly by being refused network access in the
configuration file.
If waitingForDhcpOffer(3) then a DHCP Discover has been
transmitted and no offer has yet been received.
If waitingForDhcpResponse(4) then a DHCP Request has been
transmitted and no response has yet been received.
If waitingForConfig(5) then a request to the config parameter
server has been made and no response received.
If refusedByCmts(6) then the Registration Request/Response
exchange with the Access Node failed. |
| STR pktcMtaDevServerDhcp | 1.3.6.1.4.1.4491.2.2.1.1.2.2 | DisplayString | read-write | The IP address or FQDN of the DHCP server that assigned an IP
address to this device. Returns 0.0.0.0 if DHCP was not
used for IP address assignment. |
| STR pktcMtaDevServerDns1 | 1.3.6.1.4.1.4491.2.2.1.1.2.3 | DisplayString | read-write | The IP address or FQDN of the primary DNS server that resolved
an IP address for this device. |
| STR pktcMtaDevServerDns2 | 1.3.6.1.4.1.4491.2.2.1.1.2.4 | DisplayString | read-write | The IP address or FQDN of the secondary DNS server that resolved an IP
address for this device. |
| STR pktcMtaDevConfigFile | 1.3.6.1.4.1.4491.2.2.1.1.2.5 | DisplayString | read-write | The URL of the TFTP/HTTP file for downloading provisioning
and configuration parameters to this device. Returns NULL if the
server address is unknown. Supports both TFTP and HTTP |
| STR pktcMtaDevSnmpEntity | 1.3.6.1.4.1.4491.2.2.1.1.2.6 | DisplayString | read-write | The IP address or FQDN of the SNMP entity for provisioning trap
handling that assigned an IP address to this device. Returns
0.0.0.0 if DHCP was not used for IP address assignment. |
| pktcMtaDevSecurity | 1.3.6.1.4.1.4491.2.2.1.1.3 | | | |
| X50 pktcMtaDevManufacturerCertificate | 1.3.6.1.4.1.4491.2.2.1.1.3.1 | X509Certificate | read-only | ASN.1 DER encoding of the MTA Manufacturer's X.509 public-key
certificate, called MTA Manufacturer Certificate. It is issued to
each MTA manufacturer and is installed into each MTA either in the
factory or with a code download. The provisioning server cannot
update this certificate. |
| X50 pktcMtaDevCertificate | 1.3.6.1.4.1.4491.2.2.1.1.3.2 | X509Certificate | read-only | ASN.1 DER encoding of the MTA's X.509 public-key certificate
issued by the manufacturer and installed into the embedded-MTA in
the factory. This certificate, called MTA Device Certificate,
contains the MTA's MAC address. It cannot be updated by the
provisioning server. |
| OCT pktcMtaDevSignature | 1.3.6.1.4.1.4491.2.2.1.1.3.3 | OCTET STRING | read-only | A unique signature created by the MTA for each SNMP Inform
or SNMP Trap or SNMP GetResponse message exchanged prior to
enabling SNMPv3 security ASN.1 encoded Digital signature in
the Cryptographic message syntax (includes nonce). |
| I32 pktcMtaDevCorrelationId | 1.3.6.1.4.1.4491.2.2.1.1.3.4 | Integer32 | read-only | Random value generated by the MTA for use in registration
authorization. It is for use only in the MTA initialization
messages and for MTA configuration file download. |
| pktcMtaDevSecurityTable | 1.3.6.1.4.1.4491.2.2.1.1.3.5 | | not-accessible | Contains per endpoint security information. |
| pktcMtaDevSecurityEntry | 1.3.6.1.4.1.4491.2.2.1.1.3.5.1 | | not-accessible | List of security attributes for a single IPCablecom
endpoint interface associated with ifType(104). |
| X50 pktcMtaDevServProviderCertificate | 1.3.6.1.4.1.4491.2.2.1.1.3.5.1.1 | X509Certificate | read-write | ASN.1 DER encoding of the Telephony Service Provider's X.509
public-key certificate, called Service Provider Certificate. It
serves as the root of the intra-domain trust hierarchy. Each MTA is
configured with this certificate so that it can authenticate KDCs
owned by the same service provider. The provisioning server needs
the ability to update this certificate in the MTAs via both SNMP and
configuration files. |
| X50 pktcMtaDevTelephonyCertificate | 1.3.6.1.4.1.4491.2.2.1.1.3.5.1.2 | X509Certificate | read-write | ASN.1 DER encoding of the MTA's X.509 public-key certificate
issued by the Service Provider with either the Service Provider
CA or a Local System CA. This certificate, called MTA Telephony
Certificate, contains the same public key as the MTA Device
Certificate issued by the manufacturer. It is used to authenticate
the identity of the MTA to the TGS (during PKINIT exchanges). The
provisioning server needs the ability to update this certificate in
the MTAs via both SNMP and configuration files. |
| OCT pktcMtaDevKerberosRealm | 1.3.6.1.4.1.4491.2.2.1.1.3.5.1.3 | OCTET STRING | read-write | Specifies a Kerberos realm (i.e. administrative domain), required
for IPCablecom key management]. |
| STR pktcMtaDevKerbPrincipalName | 1.3.6.1.4.1.4491.2.2.1.1.3.5.1.4 | DisplayString | read-write | Kerberos principal name for the Call Agent. This information
is required in order for the MTA to obtain Call Agent Kerberos
tickets. This principal name does not include the realm, which
is specified as a separate field in this configuration file. A
Single Kerberos principal name MAY be shared among several
Call Agents. |
| I32 pktcMtaDevServGracePeriod | 1.3.6.1.4.1.4491.2.2.1.1.3.5.1.5 | Integer32 | read-write | The MTA MUST obtain a new Kerberos ticket (with a PKINIT
exchange) this many minutes before the old ticket expires. The
minimum allowable value is 15 mins. The default is 30 mins. |
| X50 pktcMtaDevLocalSystemCertificate | 1.3.6.1.4.1.4491.2.2.1.1.3.5.1.6 | X509Certificate | read-write | Telephony Service Provider CA may delegate the issuance of
certificates to a regional Certification Authority called Local
System CA (with the corresponding Local System Certificate).
This parameter is the ASN.1 DER encoding of the Local System
Certificate. It MUST have a non-empty value when the MTA Telephony
certificate is signed by a Local System CA.
Otherwise, the value MUST be of length 0. |
| I32 pktcMtaDevKeyMgmtTimeout1 | 1.3.6.1.4.1.4491.2.2.1.1.3.5.1.7 | Integer32 | read-write | This timeout applies only when the MTA initiated key management. It
is the period during which the MTA will save a nonce (inside the
sequence number field) from the sent out AP Request and wait for the
matching AP Reply from the CMS. |
| I32 pktcMtaDevKeyMgmtTimeout2 | 1.3.6.1.4.1.4491.2.2.1.1.3.5.1.8 | Integer32 | read-write | This timeout applies only when the CMS initiated key management
(with a Wake Up or Rekey message). It is the period during which the
MTA will save a nonce (inside the sequence number field) from the
sent out AP Request and wait for the matching AP Reply from the
CMS. |
| pktcMtaDevTgsTable | 1.3.6.1.4.1.4491.2.2.1.1.3.8 | | not-accessible | Contains per endpoint Ticket Granting Server information. |
| pktcMtaDevTgsEntry | 1.3.6.1.4.1.4491.2.2.1.1.3.8.1 | | not-accessible | List of Tgs attributes for a single IPCablecom
endpoint interface associated with ifType(104). |
| I32 pktcMtaDevTgsIndex | 1.3.6.1.4.1.4491.2.2.1.1.3.8.1.1 | Integer32 | not-accessible | Index into the TGS table for TGS locations.
IfType specifies the endpoint, TgsIndex specifies a TGS. |
| STR pktcMtaDevTgsLocation | 1.3.6.1.4.1.4491.2.2.1.1.3.8.1.2 | DisplayString | read-create | Name of the TGS - Ticket Granting Server, which is the Kerberos
Server. This parameter is a FQDN or Ipv4 address. There may be
multiple entries of this type. The order in which these entries
are listed is the priority order in which the MTA will attempt to
contact them for this endpoint. |
| ROW pktcMtaDevTgsStatus | 1.3.6.1.4.1.4491.2.2.1.1.3.8.1.3 | RowStatus | read-create | This object contains the Row Status associated with
the pktcMtaDevTgsTable. |
| pktcMtaDevEvent | 1.3.6.1.4.1.4491.2.2.1.1.4 | | | |
| INT pktcMtaDevEvControl | 1.3.6.1.4.1.4491.2.2.1.1.4.1 | INTEGER | read-write | Setting this object to resetLog(1) empties the event log.
All data is deleted. Setting it to useDefaultReporting(2)
returns all event priorities to their factory-default
reporting. Reading this object always returns
useDefaultReporting(2). |
| STR pktcMtaDevEvSyslog | 1.3.6.1.4.1.4491.2.2.1.1.4.2 | DisplayString | read-write | The IP address or FQDN of the Syslog server. If 0.0.0.0,
syslog transmission is inhibited. |
| INT pktcMtaDevEvThrottleAdminStatus | 1.3.6.1.4.1.4491.2.2.1.1.4.3 | INTEGER | read-write | Controls the transmission of traps and syslog messages
with respect to the trap pacing threshold.
unconstrained(1) causes traps and syslog messages to be
transmitted without regard to the threshold settings.
maintainBelowThreshold(2) causes trap transmission and
syslog messages to be suppressed if the number of traps
would otherwise exceed the threshold.
stopAtThreshold(3) causes trap transmission to cease
at the threshold, and not resume until directed to do so.
inhibited(4) causes all trap transmission and syslog
messages to be suppressed.
A single event is always treated as a single event for
threshold counting. That is, an event causing both a trap
and a syslog message is still treated as a single event.
Writing to this object resets the thresholding state.
At initial startup, this object has a default value of
unconstrained(1). |
| T/F pktcMtaDevEvThrottleInhibited | 1.3.6.1.4.1.4491.2.2.1.1.4.4 | TruthValue | read-only | If true(1), trap and syslog transmission is currently
inhibited due to thresholds and/or the current setting of
pktcMtaDevEvThrottleAdminStatus. In addition, this is set to
true(1) if transmission is inhibited due to no
syslog (pktcMtaDevEvSyslog) or trap (pktcMtaDevNmAccessEntry)
destinations having been set. |
| U32 pktcMtaDevEvThrottleThreshold | 1.3.6.1.4.1.4491.2.2.1.1.4.5 | Unsigned32 | read-write | Number of trap/syslog events per pktcMtaDevEvThrottleInterval
to be transmitted before throttling.
A single event is always treated as a single event for
threshold counting. That is, an event causing both a trap
and a syslog message is still treated as a single event.
At initial startup, this object returns 0. |
| I32 pktcMtaDevEvThrottleInterval | 1.3.6.1.4.1.4491.2.2.1.1.4.6 | Integer32 | read-write | The interval over which the trap threshold applies.
At initial startup, this object has a value of 1. |
| pktcMtaDevEvControlTable | 1.3.6.1.4.1.4491.2.2.1.1.4.7 | | not-accessible | This table allows control of the reporting of event classes.
For each event priority, a combination of logging and
reporting mechanisms may be chosen. The mapping of event types
to priorities is vendor-dependent. Vendors may also choose to
allow the user to control that mapping through proprietary means. |
| pktcMtaDevEvControlEntry | 1.3.6.1.4.1.4491.2.2.1.1.4.7.1 | | not-accessible | Allows configuration of the reporting mechanisms for a
particular event priority. |
| INT pktcMtaDevEvPriority | 1.3.6.1.4.1.4491.2.2.1.1.4.7.1.1 | INTEGER | not-accessible | The priority level that is controlled by this
entry. These are ordered from most (emergency) to least (debug)
critical. Each event with a CM or Access Node has a particular
priority level associated with it (as defined by the
vendor). During normal operation no event more critical than
notice(6) should be generated. Events between warning and
emergency should be generated at appropriate levels of
problems (e.g. emergency when the box is about to
crash). |
| BIT pktcMtaDevEvReporting | 1.3.6.1.4.1.4491.2.2.1.1.4.7.1.2 | Bits | read-write | Defines the action to be taken on occurrence of this
event class. Implementations may not necessarily support
all options for all event classes, but at minimum must
allow traps and syslogging to be disabled. If the
local(0) bit is set, then log to the internal log, if the
traps(1) bit is set, then generate a trap, if the
syslog(2) bit is set, then send a syslog message
(assuming the syslog address is set). |
| pktcMtaDevEventTable | 1.3.6.1.4.1.4491.2.2.1.1.4.8 | | not-accessible | Contains a log of network and device events that may be
of interest in fault isolation and troubleshooting. |
| pktcMtaDevEventEntry | 1.3.6.1.4.1.4491.2.2.1.1.4.8.1 | | not-accessible | Describes a network or device event that may be of
interest in fault isolation and troubleshooting. Multiple
sequential identical events are represented by
incrementing pktcMtaDevEvCounts and setting
pktcMtaDevEvLastTime to the current time rather than creating
multiple rows.
Entries are created with the first occurrance of an event.
pktcMtaDevEvControl can be used to clear the table.
Individual events can not be deleted. |
| INT pktcMtaDevEvIndex | 1.3.6.1.4.1.4491.2.2.1.1.4.8.1.1 | INTEGER | not-accessible | Provides relative ordering of the objects in the event
log. This object will always increase except when
(a) the log is reset via pktcMtaDevEvControl,
(b) the device reboots and does not implement non-volatile
storage for this log, or (c) it reaches the value 2^31.
The next entry for all the above cases is 1. |
| DAT pktcMtaDevEvFirstTime | 1.3.6.1.4.1.4491.2.2.1.1.4.8.1.2 | DateAndTime | read-only | The time that this entry was created. |
| DAT pktcMtaDevEvLastTime | 1.3.6.1.4.1.4491.2.2.1.1.4.8.1.3 | DateAndTime | read-only | If multiple events are reported via the same entry, the
time that the last event for this entry occurred,
otherwise this should have the same value as
pktcMtaDevEvFirstTime. |
| C32 pktcMtaDevEvCounts | 1.3.6.1.4.1.4491.2.2.1.1.4.8.1.4 | Counter32 | read-only | The number of consecutive event instances reported by
this entry. This starts at 1 with the creation of this
row and increments by 1 for each subsequent duplicate event. |
| INT pktcMtaDevEvLevel | 1.3.6.1.4.1.4491.2.2.1.1.4.8.1.5 | INTEGER | read-only | The priority level of this event as defined by the
vendor. These are ordered from most serious (critical)
to least serious (debug). |
| U32 pktcMtaDevEvId | 1.3.6.1.4.1.4491.2.2.1.1.4.8.1.6 | Unsigned32 | read-only | For this product, uniquely identifies the type of event
that is reported by this entry. |
| STR pktcMtaDevEvText | 1.3.6.1.4.1.4491.2.2.1.1.4.8.1.7 | DisplayString | read-only | Provides a human-readable description of the event,
including all relevant context (interface numbers,
etc.). |
| pktcMtaNotification | 1.3.6.1.4.1.4491.2.2.1.2 | | | |
| NTF pktcMtaProvisioningEnrollment | 1.3.6.1.4.1.4491.2.2.1.2.1 | | | This inform is issued to initiate the IPCablecom
process provisioning. |
| NTF pktcMtaProvisioningStatus | 1.3.6.1.4.1.4491.2.2.1.2.2 | | | This inform is issued to confirm completion of the IPCablecom
provisioning process, and indicate the completion state. |
| pktcMtaConformance | 1.3.6.1.4.1.4491.2.2.1.3 | | | |
| pktcMtaCompliances | 1.3.6.1.4.1.4491.2.2.1.3.1 | | | |
| pktcMtaBasicCompliance | 1.3.6.1.4.1.4491.2.2.1.3.1.3 | | | The compliance statement for devices that implement
MTA feature. |
| pktcMtaGroups | 1.3.6.1.4.1.4491.2.2.1.3.2 | | | |
| pktcMtaGroup | 1.3.6.1.4.1.4491.2.2.1.3.2.1 | | | Group of objects for IPCablecom MTA MIB. |
