All MIBs › PIM-SM-MIB › swPimInfoMode
swPimInfoMode
Module: PIM-SM-MIB
OID (symbolic): PIM-SM-MIB::swPimInfoMode
OID (numeric): 1.3.6.1.4.1.171.12.52.2.3.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1.
What is swPimInfoMode?
Sets which PIM mode this interface runs -- dense, sparse, or sparseDense (PIMv1 only) -- determining whether the router floods multicast traffic by default or waits for explicit joins.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.12.52.2.3.1.8 snmpwalk -v2c -c public <target> PIM-SM-MIB::swPimInfoMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.12.52.2.3.1.8.1 snmpget -v2c -c public <target> PIM-SM-MIB::swPimInfoMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.12.52.2.3.1.8.1 i <value>
Start monitoring D-Link switch/router (PIM-SM multicast routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PIM-SM-MIB::swPimInfoMode OID value, configure state conditions and alerts, and monitor any D-Link switch/router (PIM-SM multicast routing) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.12 | dlink_common_mgmt | DLINK-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.12.52 | swPimSmMIB | PIM-SM-MIB |
| 1.3.6.1.4.1.171.12.52.2 | swPimSmInfo | PIM-SM-MIB |
| 1.3.6.1.4.1.171.12.52.2.3 | swPimInfoTable | PIM-SM-MIB |
| 1.3.6.1.4.1.171.12.52.2.3.1 | swPimInfoEntry | PIM-SM-MIB |
| 1.3.6.1.4.1.171.12.52.2.3.1.8 | swPimInfoMode | PIM-SM-MIB |