PDN-SCMEXT-MIB

All MIBs › PDN-SCMEXT-MIB

Category: DSL and Broadband

Description: Provides Subscriber Connection Manager (SCM) extension objects for session binding and subscriber policy on Paradyne platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PDN-SCMEXT-MIB?

PDN-SCMEXT-MIB is a Paradyne (built on PDN-HEADER-MIB) proprietary MIB configuring ATM VCI/VPI limits and auto-configured cross-connections. Its objects cover a max-VCI/VPI config table (ifIndex, max VPI, max VCI, row status) and an auto-config cross-connect table (channel, ifIndex, VPI, VCI, traffic descriptor, row status). As a configuration MIB it lets an administrator confirm VCI/VPI address-space limits and auto-provisioned ATM cross-connects on a Paradyne DSL/ATM device. It is deployed on Paradyne Networks DSL/ATM equipment. Engineers can download the PDN-SCMEXT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PDN-SCMEXT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Paradyne Networks DSL/ATM equipment

Monitoring Examples

An administrator checks devAtmMaxVciVpiConfigTable and devAtmAutoConfigXconTable to confirm VCI/VPI limits and auto-provisioned cross-connects on a Paradyne DSL/ATM device.

What Can Be Monitored

ATM VCI/VPI limits and auto-configured cross-connections

Imported Objects

From PDN-HEADER-MIB

pdnAtm

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
devAtmScm	1.3.6.1.4.1.1795.2.24.2.6.11.4
devAtmMaxVciVpiConfig	1.3.6.1.4.1.1795.2.24.2.6.11.4.1
devAtmMaxVciVpiConfigTable	1.3.6.1.4.1.1795.2.24.2.6.11.4.1.1		not-accessible	The Paradyne MaxVciVpi-MIB Table .
devAtmMaxVciVpiConfigEntry	1.3.6.1.4.1.1795.2.24.2.6.11.4.1.1.1		not-accessible	An entry in the Paradyne MaxVciVpi-MIB Interface Config Table.
INT devAtmMaxIfIndex	1.3.6.1.4.1.1795.2.24.2.6.11.4.1.1.1.1	INTEGER	read-only	The index value which uniquely identifies the interface for which this entry contains information on interface tests. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex from the Interfaces table of MIB II (RFC 1213).
INT devAtmMaxVpi	1.3.6.1.4.1.1795.2.24.2.6.11.4.1.1.1.2	INTEGER	read-only	This object is used to specify the vpi of interest.
INT devAtmMaxVci	1.3.6.1.4.1.1795.2.24.2.6.11.4.1.1.1.3	INTEGER	read-write	This object is used to specify the maximum number of vci's that will be allowed for the corresponding vpi.
ROW devAtmMaxVciVpiRowStatus	1.3.6.1.4.1.1795.2.24.2.6.11.4.1.1.1.4	RowStatus	read-write	This object is used to create a new row or modify or delete an existing row in this table.
devAtmAutoConfigXcon	1.3.6.1.4.1.1795.2.24.2.6.11.4.2
devAtmAutoConfigXconTable	1.3.6.1.4.1.1795.2.24.2.6.11.4.2.1		not-accessible	The Paradyne AutoConfigXcon-MIB Table .
devAtmAutoConfigXconEntry	1.3.6.1.4.1.1795.2.24.2.6.11.4.2.1.1		not-accessible	An entry in the Paradyne AutoConfigXcon-MIB Table.
INT devAtmAutoConfigXconChannel	1.3.6.1.4.1.1795.2.24.2.6.11.4.2.1.1.1	INTEGER	read-only	The index value which uniquely identifies the row in this table as being a unique range of cross connects being automatically generated for the ifindex-devAtmAutoConfigXconIfIndex.
INT devAtmAutoConfigXconIfIndex	1.3.6.1.4.1.1795.2.24.2.6.11.4.2.1.1.2	INTEGER	read-write	The index value which uniquely identifies the interface for which this entry contains information on interface tests. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex from the Interfaces table of MIB II (RFC 1213).
INT devAtmAutoConfigXconVpi	1.3.6.1.4.1.1795.2.24.2.6.11.4.2.1.1.3	INTEGER	read-write	This object is used to specify the vpi part of the vpi/vci
INT devAtmAutoConfigXconVci	1.3.6.1.4.1.1795.2.24.2.6.11.4.2.1.1.4	INTEGER	read-write	This object is used to specify the starting vci value.
INT devAtmAutoConfigXconTraffic	1.3.6.1.4.1.1795.2.24.2.6.11.4.2.1.1.5	INTEGER	read-write	This object is used to specify the class of service that this connection will be having.
ROW devAtmAutoConfigXconRowStatus	1.3.6.1.4.1.1795.2.24.2.6.11.4.2.1.1.6	RowStatus	read-write	This object is used to create a new row or modify or delete an existing row in this table.

RFC description

Configures ATM shelf configuration module settings for maximum VCI/VPI support on uplink interfaces.

Start monitoring Paradyne Networks DSL/ATM equipment (VCI/VPI limits/auto-configured cross-connects) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PDN-SCMEXT-MIB

What Is PDN-SCMEXT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description