PCSYSTEMSMIF-MIB

All MIBs › PCSYSTEMSMIF-MIB

Category: Server/Systems Management

Description: Provides system management information for PC-based platforms, covering CPU, memory, storage, and chassis environmental status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PCSYSTEMSMIF-MIB?

PCSYSTEMSMIF-MIB is an SNMP mapping of DMTF Desktop Management Interface (DMI) MIF groups for PC-based systems, historically associated with IBM's PC Server/Netfinity server line. It belongs to the systems-management category for x86 PC hardware, translating standard DMI groups such as Component ID and General Information into SNMP tables. The data exposed is primarily asset/inventory information — manufacturer, product, version, and serial number of system components — plus system identity fields like name, location, and primary user. Its monitoring value is hardware/software inventory and identity verification rather than live performance counters: it lets a management console confirm a machine's component identity and serial number match records, and flag drift in registered system name or location, complementing the broader environmental/CPU/memory monitoring implied by its family name. It directly models the DMTF DMI MIF Component ID and General Information group standards in its table/attribute naming. It is typically deployed on IBM PC Server/Netfinity and similar PC-architecture servers, managed through a DMI-to-SNMP gateway agent in enterprise systems-management consoles. Engineers can download the PCSYSTEMSMIF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PCSYSTEMSMIF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

IBM PC Server / Netfinity servers
DMI-managed PC-architecture systems

Monitoring Examples

An administrator would poll the Component ID group table (tComponentid1/eComponentid1) to read a1Manufacturer, a1Product, a1Version, and a1SerialNumber and verify the reported hardware asset matches inventory records, flagging a mismatch such as an unexpected serial number after a board swap. The General Information group (tGeneralInformation/eGeneralInformation) exposes a2SystemName, a2SystemLocation, and a2SystemPrimaryUserName, letting a monitoring system confirm a machine's registered name and location have not drifted from its CMDB entry. Because these objects are inventory/identity attributes rather than counters, this MIB is best used for asset audit and configuration-drift detection rather than real-time performance monitoring.

What Can Be Monitored

component manufacturer name
component product name and version
component serial number
system name
system location
primary system user

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
ibm	1.3.6.1.4.1.2
ibmProd	1.3.6.1.4.1.2.6
netFinity	1.3.6.1.4.1.2.6.71
dmiMibs	1.3.6.1.4.1.2.6.71.200
netFinitySystemsMIB	1.3.6.1.4.1.2.6.71.200.1
dmtfGroups1	1.3.6.1.4.1.2.6.71.200.1.1
tComponentid1	1.3.6.1.4.1.2.6.71.200.1.1.1		not-accessible	This group defines the attributes common to all components. This group is required.
eComponentid1	1.3.6.1.4.1.2.6.71.200.1.1.1.1		not-accessible
STR a1Manufacturer	1.3.6.1.4.1.2.6.71.200.1.1.1.1.1	DmiDisplaystring	read-only	Manufacturer of this system described by this component.
STR a1Product	1.3.6.1.4.1.2.6.71.200.1.1.1.1.2	DmiDisplaystring	read-only	Product name for the system described by this component.
STR a1Version	1.3.6.1.4.1.2.6.71.200.1.1.1.1.3	DmiDisplaystring	read-only	Version number of this component.
STR a1SerialNumber	1.3.6.1.4.1.2.6.71.200.1.1.1.1.4	DmiDisplaystring	read-only	Serial number for the system described by this component.
tGeneralInformation	1.3.6.1.4.1.2.6.71.200.1.1.2		not-accessible	This group defines general information about this system.
eGeneralInformation	1.3.6.1.4.1.2.6.71.200.1.1.2.1		not-accessible
STR a2SystemName	1.3.6.1.4.1.2.6.71.200.1.1.2.1.1	DmiDisplaystring	read-write	A name to identify this system.
STR a2SystemLocation	1.3.6.1.4.1.2.6.71.200.1.1.2.1.2	DmiDisplaystring	read-write	The physical location of this system.
STR a2SystemPrimaryUserName	1.3.6.1.4.1.2.6.71.200.1.1.2.1.3	DmiDisplaystring	read-write	The name of the primary user or owner of this system.
STR a2SystemPrimaryUserPhone	1.3.6.1.4.1.2.6.71.200.1.1.2.1.4	DmiDisplaystring	read-write	The phone number of the primary user of this system.
DMI a2SystemBootUpTime	1.3.6.1.4.1.2.6.71.200.1.1.2.1.5	DmiDate	read-only	The time at which the system was last booted
DMI a2SystemDateTime	1.3.6.1.4.1.2.6.71.200.1.1.2.1.6	DmiDate	read-write	This attribute returns the actual system date and time.
tOperatingSystem	1.3.6.1.4.1.2.6.71.200.1.1.3		not-accessible	This group defines general information about operating systems installed on this system.
eOperatingSystem	1.3.6.1.4.1.2.6.71.200.1.1.3.1		not-accessible
NUM a3OperatingSystemIndex	1.3.6.1.4.1.2.6.71.200.1.1.3.1.1	DmiInteger	read-only	The index into the operating system table.
STR a3OperatingSystemName	1.3.6.1.4.1.2.6.71.200.1.1.3.1.2	DmiDisplaystring	read-only	The name of this operating system.
STR a3OperatingSystemVersion	1.3.6.1.4.1.2.6.71.200.1.1.3.1.3	DmiDisplaystring	read-only	The version number of this operating system.
INT a3PrimaryOperatingSystem	1.3.6.1.4.1.2.6.71.200.1.1.3.1.4	INTEGER	read-only	If true, this is the primary operating system.
INT a3OperatingSystemBootDeviceStorageType	1.3.6.1.4.1.2.6.71.200.1.1.3.1.5	INTEGER	read-only	An index into the Disks Table to indicate the device from which this operating system was booted. To fully access the Disks Table, this index must be combined with the attribute Boot Device Index
NUM a3OperatingSystemBootDeviceIndex	1.3.6.1.4.1.2.6.71.200.1.1.3.1.6	DmiInteger	read-only	An index into the Disks Table
NUM a3OperatingSystemBootPartitionIndex	1.3.6.1.4.1.2.6.71.200.1.1.3.1.7	DmiInteger	read-only	An index into the Partition table indicating the partition from which this operating system booted.
STR a3OperatingSystemDescription	1.3.6.1.4.1.2.6.71.200.1.1.3.1.8	DmiDisplaystring	read-only	A description of this operating system.
tSystemBios	1.3.6.1.4.1.2.6.71.200.1.1.4		not-accessible	This group defines the attributes for the System BIOS.
eSystemBios	1.3.6.1.4.1.2.6.71.200.1.1.4.1		not-accessible
NUM a4BiosIndex	1.3.6.1.4.1.2.6.71.200.1.1.4.1.1	DmiInteger	read-only	The index into the system BIOS table.
STR a4Manufacturer	1.3.6.1.4.1.2.6.71.200.1.1.4.1.2	DmiDisplaystring	read-only	The name of the company that wrote this System BIOS.
STR a4Version	1.3.6.1.4.1.2.6.71.200.1.1.4.1.3	DmiDisplaystring	read-only	The version number or version string of this BIOS.
NUM a4BiosRomSize	1.3.6.1.4.1.2.6.71.200.1.1.4.1.4	DmiInteger	read-only	The physical size of this BIOS ROM device in Kilo Bytes
NUM a4StartingAddress	1.3.6.1.4.1.2.6.71.200.1.1.4.1.5	DmiInteger64	read-only	The starting physical address for the memory which the BIOS occupies
NUM a4EndingAddress	1.3.6.1.4.1.2.6.71.200.1.1.4.1.6	DmiInteger64	read-only	The ending physical address for the memory which the BIOS occupies
STR a4LoaderVersion	1.3.6.1.4.1.2.6.71.200.1.1.4.1.7	DmiDisplaystring	read-only	The BIOS flash loader version number or string.
DMI a4BiosReleaseDate	1.3.6.1.4.1.2.6.71.200.1.1.4.1.8	DmiDate	read-only	The BIOS release date.
INT a4PrimaryBios	1.3.6.1.4.1.2.6.71.200.1.1.4.1.9	INTEGER	read-only	If true, this is the primary System BIOS.
tSystemBiosCharacteristic	1.3.6.1.4.1.2.6.71.200.1.1.5		not-accessible	This group defines the characteristics for the System BIOS.
eSystemBiosCharacteristic	1.3.6.1.4.1.2.6.71.200.1.1.5.1		not-accessible
NUM a5BiosCharacteristicsIndex	1.3.6.1.4.1.2.6.71.200.1.1.5.1.1	DmiInteger	read-only	This is an index into the BIOS Characteristics table.
NUM a5BiosNumber	1.3.6.1.4.1.2.6.71.200.1.1.5.1.2	DmiInteger	read-only	This field refers to the BIOS number, which correlates to the System BIOS Index.
INT a5BiosCharacteristics	1.3.6.1.4.1.2.6.71.200.1.1.5.1.3	INTEGER	read-only	The different attributes supported by this version of the BIOS
STR a5BiosCharacteristicsDescription	1.3.6.1.4.1.2.6.71.200.1.1.5.1.4	DmiDisplaystring	read-only	An expanded description of this BIOS Characteristic.
tProcessor	1.3.6.1.4.1.2.6.71.200.1.1.6		not-accessible	This group defines the attributes for each and every processor installed in this system.
eProcessor	1.3.6.1.4.1.2.6.71.200.1.1.6.1		not-accessible
NUM a6ProcessorIndex	1.3.6.1.4.1.2.6.71.200.1.1.6.1.1	DmiInteger	read-only	An index into the processor table.
INT a6Type	1.3.6.1.4.1.2.6.71.200.1.1.6.1.2	INTEGER	read-only	The type of processor currently in the system.
INT a6ProcessorFamily	1.3.6.1.4.1.2.6.71.200.1.1.6.1.3	INTEGER	read-only	The family of processors to which this processor belongs.
STR a6VersionInformation	1.3.6.1.4.1.2.6.71.200.1.1.6.1.4	DmiDisplaystring	read-only	The version number or string for this processor.
NUM a6MaximumSpeed	1.3.6.1.4.1.2.6.71.200.1.1.6.1.5	DmiInteger	read-only	The maximum speed (in MHz) of this processor.
NUM a6CurrentSpeed	1.3.6.1.4.1.2.6.71.200.1.1.6.1.6	DmiInteger	read-only	The current speed (in MHz) of this processor.
INT a6ProcessorUpgrade	1.3.6.1.4.1.2.6.71.200.1.1.6.1.7	INTEGER	read-only	The method by which this processor can be upgraded, if upgrades are supported.
NUM a6FruGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.6.1.8	DmiInteger	read-only	If this is a Field Replaceable Unit or if it is partof another FRU, this provides index into the FRU table.A Value = -1 means that the group is not a FRU
NUM a6OperationalGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.6.1.9	DmiInteger	read-only	The index into the Operational State Table for this device if applicable
tMotherboard	1.3.6.1.4.1.2.6.71.200.1.1.7		not-accessible	This group defines attributes for the mother board
eMotherboard	1.3.6.1.4.1.2.6.71.200.1.1.7.1		not-accessible
NUM a7NumberOfExpansionSlots	1.3.6.1.4.1.2.6.71.200.1.1.7.1.1	DmiInteger	read-only	This attribute indicates the total number of expansion slots which physically exist on the motherboard whether occupied or not (See System Slots groups)
NUM a7FruGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.7.1.2	DmiInteger	read-only	If this is a Field Replaceable Unit or if it is partof another FRU, this provides index into the FRU table.A Value = -1 means that the group is not a FRU
NUM a7OperationalGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.7.1.3	DmiInteger	read-only	The index into the Operational State Table for this device if applicable
tPhysicalMemory	1.3.6.1.4.1.2.6.71.200.1.1.8		not-accessible	This group defines the physical attributes for system memory and any add- on memory installed in this system.
ePhysicalMemory	1.3.6.1.4.1.2.6.71.200.1.1.8.1		not-accessible
NUM a8PhysicalMemoryIndex	1.3.6.1.4.1.2.6.71.200.1.1.8.1.1	DmiInteger	read-only	An index into the physical memory table.
INT a8PhysicalMemoryLocation	1.3.6.1.4.1.2.6.71.200.1.1.8.1.2	INTEGER	read-only	The location of the memory modules, whether on the system board or an add on board.
NUM a8MemoryStartingAddress	1.3.6.1.4.1.2.6.71.200.1.1.8.1.3	DmiInteger64	read-only	This is the starting physical address mapped by this memory component
NUM a8MemoryEndingAddress	1.3.6.1.4.1.2.6.71.200.1.1.8.1.4	DmiInteger64	read-only	This is the ending physical address mapped by this memory component
INT a8MemoryUsage	1.3.6.1.4.1.2.6.71.200.1.1.8.1.5	INTEGER	read-only	What this memory component is used for.
NUM a8MaximumMemoryCapacity	1.3.6.1.4.1.2.6.71.200.1.1.8.1.6	DmiInteger	read-only	The maximum memory capacity, in MegaBytes on this device.
NUM a8NumberOfSimmSlots	1.3.6.1.4.1.2.6.71.200.1.1.8.1.7	DmiInteger	read-only	The number of SIMM slots available for this type of memory on this device.
NUM a8NumberOfSimmSlotsUsed	1.3.6.1.4.1.2.6.71.200.1.1.8.1.8	DmiInteger	read-only	The number of SIMM slots in use for this type of memory on this device
NUM a8MemorySpeed	1.3.6.1.4.1.2.6.71.200.1.1.8.1.9	DmiInteger	read-only	The speed of this memory component in nano seconds
INT a8MemoryErrorCorrection	1.3.6.1.4.1.2.6.71.200.1.1.8.1.10	INTEGER	read-only	The main type of error correction scheme supported by this memory component.
NUM a8FruGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.8.1.11	DmiInteger	read-only	If this is a Field Replaceable Unit or if it is partof another FRU, this provides index into the FRU table.A Value = -1 means that the group is not a FRU
NUM a8OperationalGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.8.1.12	DmiInteger	read-only	The index into the Operational State Table for this device if applicable
tLogicalMemory	1.3.6.1.4.1.2.6.71.200.1.1.9		not-accessible	This group defines the logical memory attributes for system memory and any add-on memory installed in this system.
eLogicalMemory	1.3.6.1.4.1.2.6.71.200.1.1.9.1		not-accessible
NUM a9BaseMemorySize	1.3.6.1.4.1.2.6.71.200.1.1.9.1.1	DmiInteger	read-only	The total size of the base memory in Kilo Bytes.
NUM a9FreeBaseMemorySize	1.3.6.1.4.1.2.6.71.200.1.1.9.1.2	DmiInteger	read-only	The size of free base memory in Kilo Bytes.
NUM a9ExtendedMemorySize	1.3.6.1.4.1.2.6.71.200.1.1.9.1.3	DmiInteger	read-only	The total size of the extended memory in Kilo Bytes.
NUM a9FreeExtendedMemorySize	1.3.6.1.4.1.2.6.71.200.1.1.9.1.4	DmiInteger	read-only	The size of free extended memory in Kilo Bytes.
STR a9ExtendedMemoryManagerName	1.3.6.1.4.1.2.6.71.200.1.1.9.1.5	DmiDisplaystring	read-only	The name of the extended memory manager.
STR a9ExtendedMemoryManagerVersion	1.3.6.1.4.1.2.6.71.200.1.1.9.1.6	DmiDisplaystring	read-only	The version information of the extended memory manager.
NUM a9ExpandedMemorySize	1.3.6.1.4.1.2.6.71.200.1.1.9.1.7	DmiInteger	read-only	The total size of the expanded memory in Kilo Bytes.
NUM a9FreeExpandedMemorySize	1.3.6.1.4.1.2.6.71.200.1.1.9.1.8	DmiInteger	read-only	The size of free expanded memory in Kilo Bytes.
STR a9ExpandedMemoryManagerName	1.3.6.1.4.1.2.6.71.200.1.1.9.1.9	DmiDisplaystring	read-only	The name of the expanded memory manager.
STR a9ExpandedMemoryManagerVersion	1.3.6.1.4.1.2.6.71.200.1.1.9.1.10	DmiDisplaystring	read-only	The version information of the expanded memory manager.
NUM a9ExpandedMemoryPageFrameAddress	1.3.6.1.4.1.2.6.71.200.1.1.9.1.11	DmiInteger64	read-only	The starting physical address of the expanded memory page frame.
NUM a9ExpandedMemoryPageFrameSize	1.3.6.1.4.1.2.6.71.200.1.1.9.1.12	DmiInteger	read-only	The size in Kilo Bytes of the expanded memory page frame.
NUM a9ExpandedMemoryPageSize	1.3.6.1.4.1.2.6.71.200.1.1.9.1.13	DmiInteger	read-only	The size in Kilo Bytes of an expanded memory page, as opposed to the expanded memory page frame, which consists of a number of memory pages.
tSystemCache	1.3.6.1.4.1.2.6.71.200.1.1.10		not-accessible	This group defines the attributes for different System Caches installed in this system.
eSystemCache	1.3.6.1.4.1.2.6.71.200.1.1.10.1		not-accessible
NUM a10SystemCacheIndex	1.3.6.1.4.1.2.6.71.200.1.1.10.1.1	DmiInteger	read-only	An index into the System Cache table.
INT a10SystemCacheLevel	1.3.6.1.4.1.2.6.71.200.1.1.10.1.2	INTEGER	read-only	Defines primary or secondary System Cache, or a subsidiary cache.
NUM a10SystemCacheSpeed	1.3.6.1.4.1.2.6.71.200.1.1.10.1.3	DmiInteger	read-only	The speed of this System Cache module in nano seconds
NUM a10SystemCacheSize	1.3.6.1.4.1.2.6.71.200.1.1.10.1.4	DmiInteger	read-only	The size of this System Cache module in Kilo Bytes.
INT a10SystemCacheWritePolicy	1.3.6.1.4.1.2.6.71.200.1.1.10.1.5	INTEGER	read-only	Is this a write-back or a write-through cache?
INT a10SystemCacheErrorCorrection	1.3.6.1.4.1.2.6.71.200.1.1.10.1.6	INTEGER	read-only	This field describes the main type of error correction scheme supported by thiscache component.
NUM a10FruGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.10.1.7	DmiInteger	read-only	If this is a Field Replaceable Unit or if it is partof another FRU, this provides an index into the FRU table.A Value = -1 means that the group is not a FRU
NUM a10OperationalGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.10.1.8	DmiInteger	read-only	The index into the Operational State Table for this device if applicable
tParallelPorts	1.3.6.1.4.1.2.6.71.200.1.1.11		not-accessible	This group defines the attributes for parallel ports in this system.
eParallelPorts	1.3.6.1.4.1.2.6.71.200.1.1.11.1		not-accessible
NUM a11ParallelPortIndex	1.3.6.1.4.1.2.6.71.200.1.1.11.1.1	DmiInteger	read-only	An index into the parallel ports table.
NUM a11ParallelBaseIoAddress	1.3.6.1.4.1.2.6.71.200.1.1.11.1.2	DmiInteger64	read-only	Base I/O address for this parallel port.
NUM a11IrqUsed	1.3.6.1.4.1.2.6.71.200.1.1.11.1.3	DmiInteger	read-only	IRQ number that is being used by this parallel port.
STR a11LogicalName	1.3.6.1.4.1.2.6.71.200.1.1.11.1.4	DmiDisplaystring	read-only	The logical name of the I/O device on this parallel port, under this operating environment.
INT a11ConnectorType	1.3.6.1.4.1.2.6.71.200.1.1.11.1.5	INTEGER	read-only	The connector used to interface with this I/O device on this parallel port.
INT a11ConnectorPinout	1.3.6.1.4.1.2.6.71.200.1.1.11.1.6	INTEGER	read-only	The pinout used by the I/O device on this parallel port.
INT a11DmaSupport	1.3.6.1.4.1.2.6.71.200.1.1.11.1.7	INTEGER	read-only	If true, DMA is supported.
NUM a11ParallelPortCapabilities	1.3.6.1.4.1.2.6.71.200.1.1.11.1.8	DmiInteger	read-only	Capabilities of this parallel port. This is a bit field mask with the bits defined as follows: Bit 0 set = XT/AT compatible Bit 1 set = PS/2 compatible Bit 2 set = ECP Bit 3 set = EPP
NUM a11OperationalGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.11.1.9	DmiInteger	read-only	The index into the Operational State Table for this device if applicable
tSerialPorts	1.3.6.1.4.1.2.6.71.200.1.1.12		not-accessible	This group defines the attributes for serial ports in this system.
eSerialPorts	1.3.6.1.4.1.2.6.71.200.1.1.12.1		not-accessible
NUM a12SerialPortIndex	1.3.6.1.4.1.2.6.71.200.1.1.12.1.1	DmiInteger	read-only	An index into the serial ports table.
NUM a12SerialBaseIo	1.3.6.1.4.1.2.6.71.200.1.1.12.1.2	DmiInteger64	read-only	Base I/O address for this serial port.
NUM a12IrqUsed	1.3.6.1.4.1.2.6.71.200.1.1.12.1.3	DmiInteger	read-only	IRQ number that is being used by this serial port.
STR a12LogicalName	1.3.6.1.4.1.2.6.71.200.1.1.12.1.4	DmiDisplaystring	read-only	The logical name of this serial port under this operating environment.
INT a12ConnectorType	1.3.6.1.4.1.2.6.71.200.1.1.12.1.5	INTEGER	read-only	The connector used to interface with the I/O device on this serial port.
NUM a12MaximumSpeed	1.3.6.1.4.1.2.6.71.200.1.1.12.1.6	DmiInteger	read-only	Maximum transfer speed of the device on this serial port in bits per second.
INT a12SerialPortCapabilities	1.3.6.1.4.1.2.6.71.200.1.1.12.1.7	INTEGER	read-only	The capabilities of this Serial port.
NUM a12OperationalGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.12.1.8	DmiInteger	read-only	The index into the Operational State Table for this device if applicable
tIrq	1.3.6.1.4.1.2.6.71.200.1.1.13		not-accessible	This groups defines attributes for IRQs in this system.
eIrq	1.3.6.1.4.1.2.6.71.200.1.1.13.1		not-accessible
NUM a13IrqNumber	1.3.6.1.4.1.2.6.71.200.1.1.13.1.1	DmiInteger	read-only	The current IRQ number for this IRQ.
INT a13AvailabilityOfIrq	1.3.6.1.4.1.2.6.71.200.1.1.13.1.2	INTEGER	read-only	Is this IRQ available or in use.
INT a13IrqTriggerType	1.3.6.1.4.1.2.6.71.200.1.1.13.1.3	INTEGER	read-only	The attribute indicates the trigger type of the IRQ
INT a13IrqShareable	1.3.6.1.4.1.2.6.71.200.1.1.13.1.4	INTEGER	read-only	If true, this IRQ is shareable.
STR a13IrqDescription	1.3.6.1.4.1.2.6.71.200.1.1.13.1.5	DmiDisplaystring	read-only	The name of the logical device name that is currently using this IRQ.
tDma	1.3.6.1.4.1.2.6.71.200.1.1.14		not-accessible	This group defines various attributes for the various DMA channels in this system.
eDma	1.3.6.1.4.1.2.6.71.200.1.1.14.1		not-accessible
NUM a14DmaNumber	1.3.6.1.4.1.2.6.71.200.1.1.14.1.1	DmiInteger	read-only	The current DMA channel number.
INT a14AvailabilityOfDma	1.3.6.1.4.1.2.6.71.200.1.1.14.1.2	INTEGER	read-only	If true, this DMA channel is available.
INT a14DmaBurstMode	1.3.6.1.4.1.2.6.71.200.1.1.14.1.3	INTEGER	read-only	If true, this DMA channel supports burst mode.
STR a14DmaDescription	1.3.6.1.4.1.2.6.71.200.1.1.14.1.4	DmiDisplaystring	read-only	The name of the logical device that is currently using this DMA channel.
tMemoryMappedIo	1.3.6.1.4.1.2.6.71.200.1.1.15		not-accessible	This group defines various attributes for memory mapped I/O on this system.
eMemoryMappedIo	1.3.6.1.4.1.2.6.71.200.1.1.15.1		not-accessible
NUM a15MemoryMappedIoStartingAddress	1.3.6.1.4.1.2.6.71.200.1.1.15.1.1	DmiInteger64	read-only	The starting address of a contiguous System memory mapped I/O region.
NUM a15MemoryMappedIoEndingAddress	1.3.6.1.4.1.2.6.71.200.1.1.15.1.2	DmiInteger64	read-only	The ending address of a contiguous System memory mapped I/O region.
STR a15MemoryMappedIoDescription	1.3.6.1.4.1.2.6.71.200.1.1.15.1.3	DmiDisplaystring	read-only	The name of the logical device currently using this Memory Mapped I/O.
tSystemEnclosure	1.3.6.1.4.1.2.6.71.200.1.1.16		not-accessible	This group defines the attributes for the system enclosure.
eSystemEnclosure	1.3.6.1.4.1.2.6.71.200.1.1.16.1		not-accessible
INT a16EnclosureOrChassis	1.3.6.1.4.1.2.6.71.200.1.1.16.1.1	INTEGER	read-only	The type of Enclosure.
STR a16AssetTag	1.3.6.1.4.1.2.6.71.200.1.1.16.1.2	DmiDisplaystring	read-write	The system asset tag number or string
INT a16ChassisLockPresent	1.3.6.1.4.1.2.6.71.200.1.1.16.1.3	INTEGER	read-only	If true, a chassis lock is present.
INT a16BootUpState	1.3.6.1.4.1.2.6.71.200.1.1.16.1.4	INTEGER	read-only	The current state of this system when it booted.
INT a16PowerState	1.3.6.1.4.1.2.6.71.200.1.1.16.1.5	INTEGER	read-only	The current state of the power supply state for this system.
INT a16ThermalState	1.3.6.1.4.1.2.6.71.200.1.1.16.1.6	INTEGER	read-only	The current thermal state of this system.
NUM a16FruGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.16.1.7	DmiInteger	read-only	If this is a Field Replaceable Unit or if it is partof another FRU, this provides index into the FRU table.A Value = -1 means that the group is not a FRU
NUM a16OperationalGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.16.1.8	DmiInteger	read-only	The index into the Operational State Table for this device if applicable
tPowerSupply	1.3.6.1.4.1.2.6.71.200.1.1.17		not-accessible	This group defines various attributes for power supplies in this system.
ePowerSupply	1.3.6.1.4.1.2.6.71.200.1.1.17.1		not-accessible
NUM a17PowerSupplyIndex	1.3.6.1.4.1.2.6.71.200.1.1.17.1.1	DmiInteger	read-only	The index number of the current power supply.
NUM a17FruGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.17.1.2	DmiInteger	read-only	If this is a Field Replaceable Unit or if it is partof another FRU, this provides index into the FRU table.A Value = -1 means that the group is not a FRU
NUM a17OperationalGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.17.1.3	DmiInteger	read-only	The index into the Operational State Table for this device if applicable
tCoolingDevice	1.3.6.1.4.1.2.6.71.200.1.1.18		not-accessible	This group defines various attributes for cooling devices in this system.
eCoolingDevice	1.3.6.1.4.1.2.6.71.200.1.1.18.1		not-accessible
NUM a18CoolingDeviceIndex	1.3.6.1.4.1.2.6.71.200.1.1.18.1.1	DmiInteger	read-only	An index into the cooling device table.
NUM a18FruGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.18.1.2	DmiInteger	read-only	If this is a Field Replaceable Unit or if it is partof another FRU, this provides index into the FRU table.A Value = -1 means that the group is not a FRU
NUM a18OperationalGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.18.1.3	DmiInteger	read-only	The index into the Operational State Table for this device if applicable
tSystemSlots	1.3.6.1.4.1.2.6.71.200.1.1.19		not-accessible	This group defines the attributes for the different system expansion slots supported in this system.
eSystemSlots	1.3.6.1.4.1.2.6.71.200.1.1.19.1		not-accessible
NUM a19SlotIndex	1.3.6.1.4.1.2.6.71.200.1.1.19.1.1	DmiInteger	read-only	An index into the system slot table. This is the hardware ID number for each expansion slot, whether it is occupied or not (starting with 1)
INT a19SlotType	1.3.6.1.4.1.2.6.71.200.1.1.19.1.2	INTEGER	read-only	The bus type supported in this slot. This is a bit field with the following definitions.Bit 0, if set, means it is a long-length card; if 0, it is a short-length cardBit 1, if set, is ISA, Bit 2 is EISA, Bit 3 is MCA, Bit 4 is PCI, Bit 5 is VL, and Bit 6 is PCMCIA.
INT a19SlotWidth	1.3.6.1.4.1.2.6.71.200.1.1.19.1.3	INTEGER	read-only	The maximum bus width of cards accepted in this slot.
INT a19CurrentUsage	1.3.6.1.4.1.2.6.71.200.1.1.19.1.4	INTEGER	read-only	Is this slot is currently in use?
STR a19SlotDescription	1.3.6.1.4.1.2.6.71.200.1.1.19.1.5	DmiDisplaystring	read-only	The field describes the card currently occupying this slot.
tVideo	1.3.6.1.4.1.2.6.71.200.1.1.20		not-accessible	This group defines the attributes of video devices in this system.
eVideo	1.3.6.1.4.1.2.6.71.200.1.1.20.1		not-accessible
NUM a20VideoIndex	1.3.6.1.4.1.2.6.71.200.1.1.20.1.1	DmiInteger	read-only	An index into the video table.
INT a20VideoType	1.3.6.1.4.1.2.6.71.200.1.1.20.1.2	INTEGER	read-only	The architecture of the video subsystem in this system.
NUM a20CurrentVideoMode	1.3.6.1.4.1.2.6.71.200.1.1.20.1.3	DmiInteger	read-only	The current video mode in this system
NUM a20MinimumRefreshRate	1.3.6.1.4.1.2.6.71.200.1.1.20.1.4	DmiInteger	read-only	The minimum refresh rate for this video subsystem in Hz.
NUM a20MaximumRefreshRate	1.3.6.1.4.1.2.6.71.200.1.1.20.1.5	DmiInteger	read-only	The maximum refresh rate for this video subsystem in Hz.
INT a20VideoMemoryType	1.3.6.1.4.1.2.6.71.200.1.1.20.1.6	INTEGER	read-only	The type of Video Memory for this adapter.
NUM a20VideoRamMemorySize	1.3.6.1.4.1.2.6.71.200.1.1.20.1.7	DmiInteger	read-only	Video adapter memory size in Kilo Bytes.
INT a20ScanMode	1.3.6.1.4.1.2.6.71.200.1.1.20.1.8	INTEGER	read-only	The scan mode for this video device.
INT a20VideoPhysicalLocation	1.3.6.1.4.1.2.6.71.200.1.1.20.1.9	INTEGER	read-only	The location of the video controller circuitry.
NUM a20CurrentVerticalResolution	1.3.6.1.4.1.2.6.71.200.1.1.20.1.10	DmiInteger	read-only	The current number of vertical pixels.
NUM a20CurrentHorizontalResolution	1.3.6.1.4.1.2.6.71.200.1.1.20.1.11	DmiInteger	read-only	The current number of horizontal pixels.
NUM a20CurrentNumberOfBitsPerPixel	1.3.6.1.4.1.2.6.71.200.1.1.20.1.12	DmiInteger	read-only	The number of bits used to display each pixel for this video device.
NUM a20CurrentNumberOfRows	1.3.6.1.4.1.2.6.71.200.1.1.20.1.13	DmiInteger	read-only	The number of rows in character mode for this video device.
NUM a20CurrentNumberOfColumns	1.3.6.1.4.1.2.6.71.200.1.1.20.1.14	DmiInteger	read-only	The number of columns in character mode for this video device.
NUM a20CurrentRefreshRate	1.3.6.1.4.1.2.6.71.200.1.1.20.1.15	DmiInteger	read-only	The current refresh rate in Hz for this video device.
NUM a20FruGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.20.1.16	DmiInteger	read-only	If this is a Field Replaceable Unit or if it is part of another RU, this provides an index into the FRU table. A value = -1 means that the group is not a FRU.
NUM a20OperationalGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.20.1.17	DmiInteger	read-only	The index into the Operational State Table for this device
tVideoBios	1.3.6.1.4.1.2.6.71.200.1.1.21		not-accessible	This group defines the attributes for the Video BIOS.
eVideoBios	1.3.6.1.4.1.2.6.71.200.1.1.21.1		not-accessible
NUM a21VideoBiosIndex	1.3.6.1.4.1.2.6.71.200.1.1.21.1.1	DmiInteger	read-only	The index into the Video BIOS table.
STR a21VideoBiosManufacturer	1.3.6.1.4.1.2.6.71.200.1.1.21.1.2	DmiDisplaystring	read-only	The name of the company that wrote this Video BIOS.
STR a21VideoBiosVersion	1.3.6.1.4.1.2.6.71.200.1.1.21.1.3	DmiDisplaystring	read-only	The version number or version string of this Video BIOS.
DMI a21VideoBiosReleaseDate	1.3.6.1.4.1.2.6.71.200.1.1.21.1.4	DmiDate	read-only	The Video BIOS release date.
INT a21VideoBiosShadowingState	1.3.6.1.4.1.2.6.71.200.1.1.21.1.5	INTEGER	read-only	If true, the Video BIOS is currently being shadowed
tVideoBiosCharacteristic	1.3.6.1.4.1.2.6.71.200.1.1.22		not-accessible	This group defines the characteristics for the Video BIOS.
eVideoBiosCharacteristic	1.3.6.1.4.1.2.6.71.200.1.1.22.1		not-accessible
NUM a22VideoBiosCharacteristicsIndex	1.3.6.1.4.1.2.6.71.200.1.1.22.1.1	DmiInteger	read-only	This is an index into the Video BIOS Characteristics table.
NUM a22VideoBiosNumber	1.3.6.1.4.1.2.6.71.200.1.1.22.1.2	DmiInteger	read-only	This is the Video BIOS number which correlates to the Video BIOS Index.
INT a22VideoBiosCharacteristics	1.3.6.1.4.1.2.6.71.200.1.1.22.1.3	INTEGER	read-only	The attributes and extensions supported by this version of the Video BIOS
STR a22VideoBiosCharacteristicsDescription	1.3.6.1.4.1.2.6.71.200.1.1.22.1.4	DmiDisplaystring	read-only	Expanded description of this VIDEO BIOS Characteristic.
tDiskDrives	1.3.6.1.4.1.2.6.71.200.1.1.23		not-accessible	This group defines the physical attributes of disk mass storage devices in this system.
eDiskDrives	1.3.6.1.4.1.2.6.71.200.1.1.23.1		not-accessible
INT a23StorageType	1.3.6.1.4.1.2.6.71.200.1.1.23.1.1	INTEGER	read-only	The type of this mass storage device
NUM a23DiskIndex	1.3.6.1.4.1.2.6.71.200.1.1.23.1.2	DmiInteger	read-only	An index into the disk table.
INT a23StorageInterfaceType	1.3.6.1.4.1.2.6.71.200.1.1.23.1.3	INTEGER	read-only	The interface used by this mass storage device
STR a23InterfaceDescription	1.3.6.1.4.1.2.6.71.200.1.1.23.1.4	DmiDisplaystring	read-only	A longer description of the mass storage interface.For Example, SCSI2 fast wide
INT a23MediaLoaded	1.3.6.1.4.1.2.6.71.200.1.1.23.1.5	INTEGER	read-only	If true, the media is loaded
INT a23RemovableMedia	1.3.6.1.4.1.2.6.71.200.1.1.23.1.6	INTEGER	read-only	If true, the media in this drive is removable
NUM a23DeviceId	1.3.6.1.4.1.2.6.71.200.1.1.23.1.7	DmiInteger	read-only	The SCSI address of this device
NUM a23LogicalUnitNumber	1.3.6.1.4.1.2.6.71.200.1.1.23.1.8	DmiInteger	read-only	The logical unit number of this SCSI device.
NUM a23NumberOfPhysicalCylinders	1.3.6.1.4.1.2.6.71.200.1.1.23.1.9	DmiInteger	read-only	The number of reported Physical Cylinders on this device
NUM a23NumberOfPhysicalSectorsPerTrack	1.3.6.1.4.1.2.6.71.200.1.1.23.1.10	DmiInteger	read-only	The number of reported Physical sectors per track for this device
NUM a23NumberOfPhysicalHeads	1.3.6.1.4.1.2.6.71.200.1.1.23.1.11	DmiInteger	read-only	The number of reported Physical heads for this device
NUM a23SectorSize	1.3.6.1.4.1.2.6.71.200.1.1.23.1.12	DmiInteger	read-only	The Size in bytes of the physical disk sector as reported by the disk.
NUM a23TotalPhysicalSize	1.3.6.1.4.1.2.6.71.200.1.1.23.1.13	DmiInteger	read-only	The total size in KiloBytes (1024 bytes) of this device.
NUM a23Partitions	1.3.6.1.4.1.2.6.71.200.1.1.23.1.14	DmiInteger	read-only	The number of partitions on this storage unit
NUM a23FruGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.23.1.15	DmiInteger	read-only	If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table. A value = -1 means that the group is not a FRU.
tDiskMappingTable	1.3.6.1.4.1.2.6.71.200.1.1.24		not-accessible	A table relating disks to partitions. May have an instance of a disk or partition more than once
eDiskMappingTable	1.3.6.1.4.1.2.6.71.200.1.1.24.1		not-accessible
INT a24StorageType	1.3.6.1.4.1.2.6.71.200.1.1.24.1.1	INTEGER	read-only	An index value into the Disk Table
NUM a24DiskIndex	1.3.6.1.4.1.2.6.71.200.1.1.24.1.2	DmiInteger	read-only	An index value into the Disk Table
NUM a24PartitionIndex	1.3.6.1.4.1.2.6.71.200.1.1.24.1.3	DmiInteger	read-only	An index value into the partition table
tPartition	1.3.6.1.4.1.2.6.71.200.1.1.25		not-accessible	This group describes the partitions on particular disks.
ePartition	1.3.6.1.4.1.2.6.71.200.1.1.25.1		not-accessible
NUM a25PartitionIndex	1.3.6.1.4.1.2.6.71.200.1.1.25.1.1	DmiInteger	read-only	The index into the partition table.
STR a25PartitionName	1.3.6.1.4.1.2.6.71.200.1.1.25.1.2	DmiDisplaystring	read-only	The name used by the system to identify the partition. This is normally the drive letter.
NUM a25PartitionSize	1.3.6.1.4.1.2.6.71.200.1.1.25.1.3	DmiInteger64	read-only	The size of this partition in Kilo Bytes.
NUM a25FreeSpace	1.3.6.1.4.1.2.6.71.200.1.1.25.1.4	DmiInteger64	read-only	The number of free Kilo Bytes on this partition
STR a25PartitionLabel	1.3.6.1.4.1.2.6.71.200.1.1.25.1.5	DmiOctetstring	read-only	The Partition label or the unique volume label field for this physical volume. (For DOS, this is the volume label plus the 32 bit Volume ID field if available.)
INT a25FileSystem	1.3.6.1.4.1.2.6.71.200.1.1.25.1.6	INTEGER	read-only
INT a25Compressed	1.3.6.1.4.1.2.6.71.200.1.1.25.1.7	INTEGER	read-only	If true, this partition is compressed
INT a25Encrypted	1.3.6.1.4.1.2.6.71.200.1.1.25.1.8	INTEGER	read-only	If true, this partition is encrypted
NUM a25NumberOfDisksOccupied	1.3.6.1.4.1.2.6.71.200.1.1.25.1.9	DmiInteger	read-only	The number of disks this partition occupies
tDiskController	1.3.6.1.4.1.2.6.71.200.1.1.26		not-accessible	This group defines the disk controller in this system.
eDiskController	1.3.6.1.4.1.2.6.71.200.1.1.26.1		not-accessible
NUM a26DiskControllerIndex	1.3.6.1.4.1.2.6.71.200.1.1.26.1.1	DmiInteger	read-only	Index value used by the system to identify the disk controller
NUM a26FruGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.26.1.2	DmiInteger	read-only	If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table. A value = -1 means that the group is not a FRU
NUM a26OperationalGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.26.1.3	DmiInteger	read-only	The index into the Operational State Table for this device
tLogicalDrives	1.3.6.1.4.1.2.6.71.200.1.1.27		not-accessible
eLogicalDrives	1.3.6.1.4.1.2.6.71.200.1.1.27.1		not-accessible
NUM a27LogicalDriveIndex	1.3.6.1.4.1.2.6.71.200.1.1.27.1.1	DmiInteger	read-only	An index into the Logical Drives Table
STR a27LogicalDriveName	1.3.6.1.4.1.2.6.71.200.1.1.27.1.2	DmiDisplaystring	read-only	Name used by the system to identify this logical driveFor DOS, this could be the logical drive letter (A,B,C...)
INT a27LogicalDriveType	1.3.6.1.4.1.2.6.71.200.1.1.27.1.3	INTEGER	read-only	This defines the Logical Drive type
NUM a27LogicalDriveSize	1.3.6.1.4.1.2.6.71.200.1.1.27.1.4	DmiInteger	read-only	The size of this Logical Drive in Kilo Bytes
NUM a27FreeLogicalDriveSize	1.3.6.1.4.1.2.6.71.200.1.1.27.1.5	DmiInteger	read-only	The remaining space on this Logical Drive in Kilo Bytes
STR a27LogicalDrivePath	1.3.6.1.4.1.2.6.71.200.1.1.27.1.6	DmiDisplaystring	read-only	The path used to access this Logical Drive (for remote drives)
tMouse	1.3.6.1.4.1.2.6.71.200.1.1.28		not-accessible
eMouse	1.3.6.1.4.1.2.6.71.200.1.1.28.1		not-accessible
INT a28MouseInterface	1.3.6.1.4.1.2.6.71.200.1.1.28.1.1	INTEGER	read-only	The interface type of this mouse.
NUM a28MouseIrq	1.3.6.1.4.1.2.6.71.200.1.1.28.1.2	DmiInteger	read-only	The IRQ number used by this mouse.
NUM a28MouseButtons	1.3.6.1.4.1.2.6.71.200.1.1.28.1.3	DmiInteger	read-only	The number of mouse buttons on this mouse.
STR a28MousePortName	1.3.6.1.4.1.2.6.71.200.1.1.28.1.4	DmiDisplaystring	read-only	The name of the port currently being used by this mouse.
STR a28MouseDriverName	1.3.6.1.4.1.2.6.71.200.1.1.28.1.5	DmiDisplaystring	read-only	The name of the mouse driver.
STR a28MouseDriverVersion	1.3.6.1.4.1.2.6.71.200.1.1.28.1.6	DmiDisplaystring	read-only	The version number of the mouse driver.
NUM a28FruGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.28.1.7	DmiInteger	read-only	If this is a Field Replaceable Unit or if it is part of another FRU, this attribute provides an index into the FRU table. A value = -1 means that the group is not a FRU
NUM a28OperationalGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.28.1.8	DmiInteger	read-only	The index into the Operational State Table for this device
tKeyboard	1.3.6.1.4.1.2.6.71.200.1.1.29		not-accessible	This group defines the characteristics of the PC keyboard
eKeyboard	1.3.6.1.4.1.2.6.71.200.1.1.29.1		not-accessible
STR a29KeyboardLayout	1.3.6.1.4.1.2.6.71.200.1.1.29.1.1	DmiDisplaystring	read-only	A description of the layout description of this keyboard.
STR a29KeyboardType	1.3.6.1.4.1.2.6.71.200.1.1.29.1.2	DmiDisplaystring	read-only	The type description of this keyboard.
INT a29KeyboardConnectorType	1.3.6.1.4.1.2.6.71.200.1.1.29.1.3	INTEGER	read-only	The type description of the keyboard connector used by this keyboard.
NUM a29FruGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.29.1.4	DmiInteger	read-only	If this is a Field Replaceable Unit or if it is part of another FRU, this provides an FRU index into the FRU table. A value = -1 means that the group is not a FRU
NUM a29OperationalGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.29.1.5	DmiInteger	read-only	The index into the Operational State Table for this device
tFieldReplacableUnit	1.3.6.1.4.1.2.6.71.200.1.1.30		not-accessible	An FRU, or Field Replaceable Unit, is defined as a hardware component which is designed to be separately removable for replacement or repair. For the purposes of this definition, a motherboard and a fixed hard disk are FRU's, whereas a fixed hard disk platter or a chip fixed in place on the motherboard are not FRU's since they are not designed to be separately removable. Each instance within the FRU table should contain the device group and instance data for the associated hardware component
eFieldReplacableUnit	1.3.6.1.4.1.2.6.71.200.1.1.30.1		not-accessible
NUM a30FruIndex	1.3.6.1.4.1.2.6.71.200.1.1.30.1.1	DmiInteger	read-only	The index into the FRU table
NUM a30DeviceGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.30.1.2	DmiInteger	read-only	The group ID of the group referencing this FRU instance
STR a30Description	1.3.6.1.4.1.2.6.71.200.1.1.30.1.3	DmiDisplaystring	read-write	A clear description of this FRU
STR a30Manufacturer	1.3.6.1.4.1.2.6.71.200.1.1.30.1.4	DmiDisplaystring	read-write	The name of the company manufacturing or providing this FRU
STR a30Model	1.3.6.1.4.1.2.6.71.200.1.1.30.1.5	DmiDisplaystring	read-write	The manufacturer's model number for this FRU
STR a30PartNumber	1.3.6.1.4.1.2.6.71.200.1.1.30.1.6	DmiDisplaystring	read-write	A part number by which a replacement part can be ordered for this FRU
STR a30FruSerialNumber	1.3.6.1.4.1.2.6.71.200.1.1.30.1.7	DmiDisplaystring	read-write	The manufacturer's serial number for this FRU
STR a30RevisionLevel	1.3.6.1.4.1.2.6.71.200.1.1.30.1.8	DmiDisplaystring	read-write	The revision level of this FRU
tOperationalState	1.3.6.1.4.1.2.6.71.200.1.1.31		not-accessible	This group provides the operational state, usage, and availabili y status, and administrative state indicators for specific Device Group instance .
eOperationalState	1.3.6.1.4.1.2.6.71.200.1.1.31.1		not-accessible
NUM a31OperationalStateInstanceIndex	1.3.6.1.4.1.2.6.71.200.1.1.31.1.1	DmiInteger	read-only	The Index into the Operational State table
NUM a31DeviceGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.31.1.2	DmiInteger	read-only	The group ID of the group referencing this instance
INT a31OperationalStatus	1.3.6.1.4.1.2.6.71.200.1.1.31.1.3	INTEGER	read-only	The operational status of the Device group instance
INT a31UsageState	1.3.6.1.4.1.2.6.71.200.1.1.31.1.4	INTEGER	read-only	The usage state of the Device Group instance
INT a31AvailabilityStatus	1.3.6.1.4.1.2.6.71.200.1.1.31.1.5	INTEGER	read-only	The availability status of the Device Group instance
INT a31AdministrativeState	1.3.6.1.4.1.2.6.71.200.1.1.31.1.6	INTEGER	read-only	The administrative state of the Device Group instance
NUM a31FatalErrorCount	1.3.6.1.4.1.2.6.71.200.1.1.31.1.7	DmiCounter	read-only	The accumulated fatal error count for this Device Group Instance
NUM a31MajorErrorCount	1.3.6.1.4.1.2.6.71.200.1.1.31.1.8	DmiCounter	read-only	The accumulated major error count for this Device Group Instance
NUM a31WarningErrorCount	1.3.6.1.4.1.2.6.71.200.1.1.31.1.9	DmiCounter	read-only	The accumulated warning error count for this Device Group Instance
tSystemResourcesDescription	1.3.6.1.4.1.2.6.71.200.1.1.32		not-accessible	The System Resources Description group describes the number of entries in the System Resources Group.
eSystemResourcesDescription	1.3.6.1.4.1.2.6.71.200.1.1.32.1		not-accessible
NUM a32DeviceCount	1.3.6.1.4.1.2.6.71.200.1.1.32.1.1	DmiInteger	read-only	A counter of the number of different hardware devices represente in this table.
NUM a32SystemResourceCount	1.3.6.1.4.1.2.6.71.200.1.1.32.1.2	DmiInteger	read-only	A count of the total number of system resources on this sytemins ances in this table.
tSystemResources	1.3.6.1.4.1.2.6.71.200.1.1.33		not-accessible	The System Resources group contains hardware descriptions which are commonly used in PC style computers such as IRQs, IO ports and memory address ranges.
eSystemResources	1.3.6.1.4.1.2.6.71.200.1.1.33.1		not-accessible
NUM a33ResourceInstance	1.3.6.1.4.1.2.6.71.200.1.1.33.1.1	DmiInteger	read-only	Instance identifier for a group in this table.
NUM a33ResourceParentGroupIndex	1.3.6.1.4.1.2.6.71.200.1.1.33.1.2	DmiInteger	read-only	The group ID of the group referencing this instance in the table
INT a33ResourceType	1.3.6.1.4.1.2.6.71.200.1.1.33.1.3	INTEGER	read-only	The type of system resource represented by this entry.
NUM a33ResourceBase	1.3.6.1.4.1.2.6.71.200.1.1.33.1.4	DmiInteger	read-only	The starting address of the system resource in the appropriatead ress space.
NUM a33ResourceSize	1.3.6.1.4.1.2.6.71.200.1.1.33.1.5	DmiInteger	read-only	The size of the system resource.
NUM a33ResourceFlags	1.3.6.1.4.1.2.6.71.200.1.1.33.1.6	DmiInteger	read-only	This attribute contains fields representing the status of this resource entry. The meaning of this field varies according to the the Resource Type field in this group.
tNetfinityDmiInstall	1.3.6.1.4.1.2.6.71.200.1.1.34		not-accessible	This group uniquely identifies NetFinity's instrumentation of this PC Systems MIF.
eNetfinityDmiInstall	1.3.6.1.4.1.2.6.71.200.1.1.34.1		not-accessible
STR a34ProductName	1.3.6.1.4.1.2.6.71.200.1.1.34.1.1	DmiDisplaystring	read-only	Name of this product
tMicrochannelAdapterInformation	1.3.6.1.4.1.2.6.71.200.1.1.35		not-accessible	This group provides detailed information about the Microchannel devices detected in your system
eMicrochannelAdapterInformation	1.3.6.1.4.1.2.6.71.200.1.1.35.1		not-accessible
NUM a35AdapterIndex	1.3.6.1.4.1.2.6.71.200.1.1.35.1.1	DmiInteger	read-only	Index into the MCA adapter table
NUM a35SlotNumber	1.3.6.1.4.1.2.6.71.200.1.1.35.1.2	DmiInteger	read-only	The slot in which the adapter was detected.
STR a35AdapterId	1.3.6.1.4.1.2.6.71.200.1.1.35.1.3	DmiDisplaystring	read-only	The unique number that identifies the adapter.
STR a35PosData	1.3.6.1.4.1.2.6.71.200.1.1.35.1.4	DmiDisplaystring	read-only	This is Programmable Option Select data used to automatically configure the system.
STR a35AdapterName	1.3.6.1.4.1.2.6.71.200.1.1.35.1.5	DmiDisplaystring	read-only	The name of this adapter.
tPciDeviceInformation	1.3.6.1.4.1.2.6.71.200.1.1.36		not-accessible	This group provides detailed information about the PCI devices detected in your system
ePciDeviceInformation	1.3.6.1.4.1.2.6.71.200.1.1.36.1		not-accessible
NUM a36DeviceIndex	1.3.6.1.4.1.2.6.71.200.1.1.36.1.1	DmiInteger	read-only	Index into the PCI device table
STR a36ClassCode	1.3.6.1.4.1.2.6.71.200.1.1.36.1.2	DmiDisplaystring	read-only	Number that identifies the base class, sub-class, and programmin interface
STR a36PciDeviceName	1.3.6.1.4.1.2.6.71.200.1.1.36.1.3	DmiDisplaystring	read-only	Description of device that includes manufacturer and device function
STR a36VendorId	1.3.6.1.4.1.2.6.71.200.1.1.36.1.4	DmiDisplaystring	read-only	Number that uniquely identifies the manufacturer
STR a36DeviceId	1.3.6.1.4.1.2.6.71.200.1.1.36.1.5	DmiDisplaystring	read-only	Number assigned by the manufacturer that uniquely identifes the device
NUM a36BusNumber	1.3.6.1.4.1.2.6.71.200.1.1.36.1.6	DmiInteger	read-only	PCI bus that this device is on
STR a36DeviceNumber	1.3.6.1.4.1.2.6.71.200.1.1.36.1.7	DmiDisplaystring	read-only	Number in the range 0..31 that uniquely selects a device on a PCI bus
STR a36RevisionId	1.3.6.1.4.1.2.6.71.200.1.1.36.1.8	DmiDisplaystring	read-only
tEisaDeviceInformation	1.3.6.1.4.1.2.6.71.200.1.1.37		not-accessible	This group provides detailed information about the EISA devices detected in your system
eEisaDeviceInformation	1.3.6.1.4.1.2.6.71.200.1.1.37.1		not-accessible
NUM a37DeviceIndex	1.3.6.1.4.1.2.6.71.200.1.1.37.1.1	DmiInteger	read-only	Index into the EISA device table
STR a37ProductId	1.3.6.1.4.1.2.6.71.200.1.1.37.1.2	DmiDisplaystring	read-only	Number that uniquely identifies the device
STR a37EisaDeviceName	1.3.6.1.4.1.2.6.71.200.1.1.37.1.3	DmiDisplaystring	read-only	Description of device
STR a37Manufacturer	1.3.6.1.4.1.2.6.71.200.1.1.37.1.4	DmiDisplaystring	read-only	Name of manufacturer of the system board or adapter
NUM a37SlotLocation	1.3.6.1.4.1.2.6.71.200.1.1.37.1.5	DmiInteger	read-only	The physical or logical slot number in the system of the device. Thesystem board is always slot 0. Slots 1-15 are physical slots. Slots 16-64 are for virtual devices.
INT a37SlotType	1.3.6.1.4.1.2.6.71.200.1.1.37.1.6	INTEGER	read-only	An expansion slot is a physical slot. An embedded device is an EISA I/O device integrated onto the system board. A virtual device is generally a software driver that may needsystem resources.
NUM a37NumberOfDeviceFunctions	1.3.6.1.4.1.2.6.71.200.1.1.37.1.7	DmiInteger	read-only	Number of device functions associated with the device (i.e. memory function, serial function, parallel function, etc).
INT a37IdType	1.3.6.1.4.1.2.6.71.200.1.1.37.1.8	INTEGER	read-only	An EISA system may have EISA and ISA adapters. ISA adapters will nothave readable IDs
tRaidAdapterInformation	1.3.6.1.4.1.2.6.71.200.1.1.38		not-accessible	This group provides detailed information about the RAID adapters in your system
eRaidAdapterInformation	1.3.6.1.4.1.2.6.71.200.1.1.38.1		not-accessible
NUM a38RaidAdapterIndex	1.3.6.1.4.1.2.6.71.200.1.1.38.1.1	DmiInteger	read-only	Index into the RAID Adapter table
NUM a38NumberOfLogicalVolumes	1.3.6.1.4.1.2.6.71.200.1.1.38.1.2	DmiInteger	read-only	Number of Logical Volumes for this adapter
NUM a38NumberOfPhysicalDevices	1.3.6.1.4.1.2.6.71.200.1.1.38.1.3	DmiInteger	read-only	Number of Physical Devices for this adapter
NUM a38NumberOfPhysicalDrivesOffline	1.3.6.1.4.1.2.6.71.200.1.1.38.1.4	DmiInteger	read-only	Name of Physical Drives Offline for this adapter
NUM a38NumberOfCriticalVirtualDrives	1.3.6.1.4.1.2.6.71.200.1.1.38.1.5	DmiInteger	read-only	Number of Critical Virtual Drives for this adapter
NUM a38NumberOfDefunctPhysicalDrives	1.3.6.1.4.1.2.6.71.200.1.1.38.1.6	DmiInteger	read-only	Number of Defunct Physical Drives for this adapter
tRaidVirtualDrivesInformation	1.3.6.1.4.1.2.6.71.200.1.1.39		not-accessible	This group provides detailed information about the RAID Virtual drivesin your system
eRaidVirtualDrivesInformation	1.3.6.1.4.1.2.6.71.200.1.1.39.1		not-accessible
NUM a39RaidVirtualDriveIndex	1.3.6.1.4.1.2.6.71.200.1.1.39.1.1	DmiInteger	read-only	Index into the RAID Virtual Drives table
NUM a39RaidAdapterIndex	1.3.6.1.4.1.2.6.71.200.1.1.39.1.2	DmiInteger	read-only	Index into RAID Adapter Table
INT a39VirtualDriveState	1.3.6.1.4.1.2.6.71.200.1.1.39.1.3	INTEGER	read-only	State of Virtual Drive
NUM a39VirtualDriveSize	1.3.6.1.4.1.2.6.71.200.1.1.39.1.4	DmiInteger	read-only	Size of Virtual Drive in Kilobytes
tRaidPhysicalDriveInformation	1.3.6.1.4.1.2.6.71.200.1.1.40		not-accessible	This group provides detailed information about the RAID physical drivesin your system
eRaidPhysicalDriveInformation	1.3.6.1.4.1.2.6.71.200.1.1.40.1		not-accessible
NUM a40RaidPhysicalDriveIndex	1.3.6.1.4.1.2.6.71.200.1.1.40.1.1	DmiInteger	read-only	Index into the RAID Physical Drives table
NUM a40RaidAdapterIndex	1.3.6.1.4.1.2.6.71.200.1.1.40.1.2	DmiInteger	read-only	Index into RAID Adapter Table
NUM a40PhysicalDriveSize	1.3.6.1.4.1.2.6.71.200.1.1.40.1.3	DmiInteger	read-only	Size of Physical Drive in Kilobytes
NUM a40ChannelNumber	1.3.6.1.4.1.2.6.71.200.1.1.40.1.4	DmiInteger	read-only	Channel on RAID Adapter on which this physical drive is located
NUM a40TargetNumber	1.3.6.1.4.1.2.6.71.200.1.1.40.1.5	DmiInteger	read-only	Target number on RAID Adapter on which this physical drive is located
INT a40RaidPhysicalDeviceState	1.3.6.1.4.1.2.6.71.200.1.1.40.1.6	INTEGER	read-only	Device state of the Physical Drive

RFC description

Defines system component management information for IBM NetFinity servers, including processor and system identification data.

Start monitoring IBM PC Server/Netfinity servers, DMI-managed PC-architecture systems with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PCSYSTEMSMIF-MIB

What Is PCSYSTEMSMIF-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description