OneAccess-RoundTripTime-MIB

All MIBs › OneAccess-RoundTripTime-MIB

Organization: OneAccess

Last Updated: 2011-07-29

Category: CPE/Router

Description: Measures round-trip time for network paths and reports RTT statistics on OneAccess CPE routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OneAccess-RoundTripTime-MIB?

OneAccess-RoundTripTime-MIB is a vendor-specific SNMP module for OneAccess customer-premises equipment (CPE) routers that implements an active network-probing feature to measure round-trip time and related path performance across supported protocols. It exposes tables describing which RTT probe types and protocols the device supports, along with a control table for configuring and scheduling individual RTT test operations and a history of collected results. Its core use is monitoring software-driven network performance rather than physical hardware — administrators track configured probe operations, their supported protocol coverage, and historical RTT results to detect latency spikes, path degradation, or reachability problems on WAN links. This design closely parallels Cisco's IP SLA / RTTMON MIB concept, though it is OneAccess's own implementation rather than a direct extension of it. It is deployed on OneAccess CPE routers at branch or customer sites where service providers need proactive WAN performance visibility. Engineers can download the OneAccess-RoundTripTime-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OneAccess-RoundTripTime-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

OneAccess CPE router
OneAccess branch-office WAN gateway

Monitoring Examples

An operator configures entries in oacRttControlTable/oacRttControlEntry, keyed by oacRttControlIndex, to define a specific test using a protocol validated via oacRttApplSuppProtocolsTable, then polls oacRttHistory for the resulting round-trip time samples. Comparing successive oacRttHistory entries reveals a WAN path exhibiting increasing latency or intermittent timeouts, prompting investigation of the carrier link. The oacRttApplSuppRttTypesTable confirms which RTT test types (e.g., ICMP echo, UDP jitter) a given firmware version supports before provisioning a test.

What Can Be Monitored

configured RTT test operations
supported RTT protocols
round-trip time history
supported RTT test types
probe application version

Imported Objects

From IF-MIB

OwnerString

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From ONEACCESS-GLOBAL-REG

oacExpIMManagement	OBJECT-IDENTITY
oacMIBModules	OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TimeInterval
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using oacRttControlOperOctetsInUse OID:

Select an OneAccess CPE router (active WAN round-trip-time probing) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type oacRttControlOperOctetsInUse into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Octets in use by the entry. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Gauge32-type OID, Value bounds is the most useful condition here — trigger an alert if the value drifts significantly from its normal baseline, since an unexpected change often points to a real underlying issue. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
oacRttChkMIB	1.3.6.1.4.1.13191.10.3.4.1223			fixed compilation issues
oacRttChkObj	1.3.6.1.4.1.13191.10.3.4.1223.1
oacRttControl	1.3.6.1.4.1.13191.10.3.4.1223.1.1
oacRttControlTable	1.3.6.1.4.1.13191.10.3.4.1223.1.1.1		not-accessible	Definitions for RTT operations.
oacRttControlEntry	1.3.6.1.4.1.13191.10.3.4.1223.1.1.1.1		not-accessible	List of objetcts defining a conceptual RTT operation.
I32 oacRttControlIndex	1.3.6.1.4.1.13191.10.3.4.1223.1.1.1.1.1	Integer32	not-accessible	Identifies a RTT row in oacRttControlTable.
ROW oacRttControlStatus	1.3.6.1.4.1.13191.10.3.4.1223.1.1.1.1.2	RowStatus	read-create	The status of the RTT row.
STR oacRttControlTag	1.3.6.1.4.1.13191.10.3.4.1223.1.1.1.1.3	DisplayString	read-create	String used only by application for identify the row.
I32 oacRttControlFrequency	1.3.6.1.4.1.13191.10.3.4.1223.1.1.1.1.4	Integer32	read-create	Define frequency in seconds of RTT operations.
OAC oacRttControlRttType	1.3.6.1.4.1.13191.10.3.4.1223.1.1.1.1.5	OacRttRttType	read-create	Define type of RTT operation.
I32 oacRttControlTimeout	1.3.6.1.4.1.13191.10.3.4.1223.1.1.1.1.6	Integer32	read-create	Defines the timeout for an operation. It must be set to a smaller value then oacRttControlFrequency*1000
STR oacRttControlOwner	1.3.6.1.4.1.13191.10.3.4.1223.1.1.1.1.7	OwnerString	read-create	Identifies the creator of the row.
I32 oacRttControlThreshold	1.3.6.1.4.1.13191.10.3.4.1223.1.1.1.1.8	Integer32	read-create	Define threshold limit.
oacRttEchoTable	1.3.6.1.4.1.13191.10.3.4.1223.1.1.2		not-accessible	A table with definitions for an RTT entry.
oacRttEchoEntry	1.3.6.1.4.1.13191.10.3.4.1223.1.1.2.1		not-accessible	List of objects for RTT entry configuration.
ADR oacRttEchoSourceAddress	1.3.6.1.4.1.13191.10.3.4.1223.1.1.2.1.1	OacRttTargetAddress	read-create	Source address to use when sending probes.
ADR oacRttEchoTargetAddress	1.3.6.1.4.1.13191.10.3.4.1223.1.1.2.1.2	OacRttTargetAddress	read-create	Specifies the IP address of the target.
I32 oacRttEchoPktDataRequestSize	1.3.6.1.4.1.13191.10.3.4.1223.1.1.2.1.3	Integer32	read-create	Specifies the size of the packet to send.
I32 oacRttEchoPktDataResponseSize	1.3.6.1.4.1.13191.10.3.4.1223.1.1.2.1.4	Integer32	read-create	Specifies the size of the packet to receive.
I32 oacRttEchoTOS	1.3.6.1.4.1.13191.10.3.4.1223.1.1.2.1.5	Integer32	read-create	This object represents the type of service in an IP header.
OAC oacRttEchoProtocol	1.3.6.1.4.1.13191.10.3.4.1223.1.1.2.1.6	OacRttProtocol	read-create	Protocol type to use for the probes.
oacRttHistoryTable	1.3.6.1.4.1.13191.10.3.4.1223.1.1.3		not-accessible	Definitions for history chcking for an RTT entry.
oacRttHistoryEntry	1.3.6.1.4.1.13191.10.3.4.1223.1.1.3.1		not-accessible	List of definitions for hisotry collections.
I32 oacRttHistoryNumBuckets	1.3.6.1.4.1.13191.10.3.4.1223.1.1.3.1.1	Integer32	read-create	MAximum buckets to record.
INT oacRttHistoryFilter	1.3.6.1.4.1.13191.10.3.4.1223.1.1.3.1.2	INTEGER	read-create	Define filters for history recording.
I32 oacRttHistoryNumLives	1.3.6.1.4.1.13191.10.3.4.1223.1.1.3.1.3	Integer32	read-create	Define number of lives for history recording.
I32 oacRttHistoryNumSamples	1.3.6.1.4.1.13191.10.3.4.1223.1.1.3.1.4	Integer32	read-create	The number of samples to record for one bucket.
oacRttSchedTable	1.3.6.1.4.1.13191.10.3.4.1223.1.1.4		not-accessible	Probe scheduling table.
oacRttSchedEntry	1.3.6.1.4.1.13191.10.3.4.1223.1.1.4.1		not-accessible	Probe scheduling entry in the scheduling table.
TIK oacRttSchedRttStartTime	1.3.6.1.4.1.13191.10.3.4.1223.1.1.4.1.1	TimeTicks	read-create	Specifies when to start the probe.
I32 oacRttSchedRttLife	1.3.6.1.4.1.13191.10.3.4.1223.1.1.4.1.2	Integer32	read-create	Specifies for how long the probe will remain active.
I32 oacRttSchedConceptRowAgeout	1.3.6.1.4.1.13191.10.3.4.1223.1.1.4.1.3	Integer32	read-create	Specifies the age of created RTR session.
oacRttReactTable	1.3.6.1.4.1.13191.10.3.4.1223.1.1.5		not-accessible	Probe reaction table.
oacRttReactEntry	1.3.6.1.4.1.13191.10.3.4.1223.1.1.5.1		not-accessible	Probe reaction entry in the table.
INT oacRttReactActionType	1.3.6.1.4.1.13191.10.3.4.1223.1.1.5.1.1	INTEGER	read-create	Specifies the trigger as reaction.
INT oacRttReactThresholdType	1.3.6.1.4.1.13191.10.3.4.1223.1.1.5.1.2	INTEGER	read-create	Specifies the threshold type for reaction.
I32 oacRttReactThresholdCount	1.3.6.1.4.1.13191.10.3.4.1223.1.1.5.1.3	Integer32	read-create	Specifies the threshold count for reaction.
I32 oacRttReactThresholdCount2	1.3.6.1.4.1.13191.10.3.4.1223.1.1.5.1.4	Integer32	read-create	Specifies the threshold count for reaction.
T/F oacRttReactConnectionEnable	1.3.6.1.4.1.13191.10.3.4.1223.1.1.5.1.5	TruthValue	read-create	Specifies if the connection is enabled for reaction.
T/F oacRttReactVerifyErrorEnable	1.3.6.1.4.1.13191.10.3.4.1223.1.1.5.1.6	TruthValue	read-create	Specifies if the error verification is enabled for reaction.
I32 oacRttReactThresholdFalling	1.3.6.1.4.1.13191.10.3.4.1223.1.1.5.1.7	Integer32	read-create	Specifies the threshold falling for reaction.
T/F oacRttReactTimeoutEnable	1.3.6.1.4.1.13191.10.3.4.1223.1.1.5.1.8	TruthValue	read-create	Specifies if the timeout is enabled for reaction.
oacRttStatisticsTable	1.3.6.1.4.1.13191.10.3.4.1223.1.1.6		not-accessible	RTT statistics table.
oacRttStatisticsEntry	1.3.6.1.4.1.13191.10.3.4.1223.1.1.6.1		not-accessible	RTT statistics table entry.
I32 oacRttStatisticsNumDistBuckets	1.3.6.1.4.1.13191.10.3.4.1223.1.1.6.1.1	Integer32	read-create	Number of distibution buckets.
I32 oacRttStatisticsNumHops	1.3.6.1.4.1.13191.10.3.4.1223.1.1.6.1.2	Integer32	read-create	Number of hops.
I32 oacRttStatisticsNumPaths	1.3.6.1.4.1.13191.10.3.4.1223.1.1.6.1.3	Integer32	read-create	Number of paths.
I32 oacRttStatisticsDistInterval	1.3.6.1.4.1.13191.10.3.4.1223.1.1.6.1.4	Integer32	read-create	Distribution interval.
I32 oacRttStatisticsNumHourGroups	1.3.6.1.4.1.13191.10.3.4.1223.1.1.6.1.5	Integer32	read-create	Number of hour groups.
oacRttControlOperTable	1.3.6.1.4.1.13191.10.3.4.1223.1.1.7		not-accessible	A table with values for a RTT entry.
oacRttControlOperEntry	1.3.6.1.4.1.13191.10.3.4.1223.1.1.7.1		not-accessible	RTT entry.
I32 oacRttControlOperNumRtts	1.3.6.1.4.1.13191.10.3.4.1223.1.1.7.1.1	Integer32	read-only	The number of probe total initialisation.
G32 oacRttControlOperOctetsInUseEx	1.3.6.1.4.1.13191.10.3.4.1223.1.1.7.1.2	Gauge32	read-only	Octets in use by the entry.
STR oacRttControlOperDiagText	1.3.6.1.4.1.13191.10.3.4.1223.1.1.7.1.3	DisplayString	read-only
T/F oacRttControlOperOverThresholdOccurred	1.3.6.1.4.1.13191.10.3.4.1223.1.1.7.1.4	TruthValue	read-only	Specifies if threshold occured.
INT oacRttControlOperState	1.3.6.1.4.1.13191.10.3.4.1223.1.1.7.1.5	INTEGER	read-write	Operations state of the RTT entry.
T/F oacRttControlOperTimeoutOccurred	1.3.6.1.4.1.13191.10.3.4.1223.1.1.7.1.6	TruthValue	read-only	True if a timeout occured.
I32 oacRttControlOperRttLife	1.3.6.1.4.1.13191.10.3.4.1223.1.1.7.1.7	Integer32	read-only	A value witch is decremented on every seconds. When it reaches zero, the RTT entry is suspended.
TIM oacRttControlOperModificationTime	1.3.6.1.4.1.13191.10.3.4.1223.1.1.7.1.8	TimeStamp	read-only
T/F oacRttControlOperConnLostOccurred	1.3.6.1.4.1.13191.10.3.4.1223.1.1.7.1.9	TruthValue	read-only	Connection loss occured.
TIM oacRttControlOperResetTime	1.3.6.1.4.1.13191.10.3.4.1223.1.1.7.1.10	TimeStamp	read-only	Reset time.
oacRttReactTriggerTable	1.3.6.1.4.1.13191.10.3.4.1223.1.1.8		not-accessible	Table witch defines witch entries became active when a problem is detected.
oacRttReactTriggerEntry	1.3.6.1.4.1.13191.10.3.4.1223.1.1.8.1		not-accessible	Reaction trigger entry.
I32 oacRttReactTriggerOacRttControlIndex	1.3.6.1.4.1.13191.10.3.4.1223.1.1.8.1.1	Integer32	not-accessible	Reaction trigger control index.
ROW oacRttReactTriggerStatus	1.3.6.1.4.1.13191.10.3.4.1223.1.1.8.1.2	RowStatus	read-create	Used to create a trigger.
oacRttReactTriggerOperTable	1.3.6.1.4.1.13191.10.3.4.1223.1.1.9		not-accessible	Reaction trigger operation table.
oacRttReactTriggerOperEntry	1.3.6.1.4.1.13191.10.3.4.1223.1.1.9.1		not-accessible	Reaction trigger operation table entry.
INT oacRttReactTriggerOperState	1.3.6.1.4.1.13191.10.3.4.1223.1.1.9.1.1	INTEGER	read-only	Trigger state.
oacRttLatestRttOperTable	1.3.6.1.4.1.13191.10.3.4.1223.1.1.10		not-accessible	Table with values for the latest RTT operation.
oacRttLatestRttOperEntry	1.3.6.1.4.1.13191.10.3.4.1223.1.1.10.1		not-accessible	Operation entry.
TIM oacRttLatestRttOperTime	1.3.6.1.4.1.13191.10.3.4.1223.1.1.10.1.1	TimeStamp	read-only	The system time when the latest operation occured.
RTT oacRttLatestRttOperSense	1.3.6.1.4.1.13191.10.3.4.1223.1.1.10.1.2	RttResponseSense	read-only	Operation time.
STR oacRttLatestRttOperSenseDescription	1.3.6.1.4.1.13191.10.3.4.1223.1.1.10.1.3	DisplayString	read-only	Operation sense description.
ADR oacRttLatestRttOperAddress	1.3.6.1.4.1.13191.10.3.4.1223.1.1.10.1.4	OacRttTargetAddress	read-only	The address of the target.
G32 oacRttLatestRttOperCompletionTime	1.3.6.1.4.1.13191.10.3.4.1223.1.1.10.1.5	Gauge32	read-only	Operation completion time.
I32 oacRttLatestRttOperApplSpecificSense	1.3.6.1.4.1.13191.10.3.4.1223.1.1.10.1.6	Integer32	read-only	Operation application specific sense.
oacRttHistory	1.3.6.1.4.1.13191.10.3.4.1223.1.2
oacRttHistoryCollectionTable	1.3.6.1.4.1.13191.10.3.4.1223.1.2.1		not-accessible	The table with collected history information.
oacRttHistoryCollectionEntry	1.3.6.1.4.1.13191.10.3.4.1223.1.2.1.1		not-accessible	History collection entry.
I32 oacRttHistoryCollectionLifeIndex	1.3.6.1.4.1.13191.10.3.4.1223.1.2.1.1.1	Integer32	not-accessible	History collection life index.
I32 oacRttHistoryCollectionBucketIndex	1.3.6.1.4.1.13191.10.3.4.1223.1.2.1.1.2	Integer32	not-accessible	History collection bucket index.
I32 oacRttHistoryCollectionSampleIndex	1.3.6.1.4.1.13191.10.3.4.1223.1.2.1.1.3	Integer32	not-accessible	History collection sample index.
I32 oacRttHistoryCollectionApplSpecificSense	1.3.6.1.4.1.13191.10.3.4.1223.1.2.1.1.4	Integer32	read-only	History collection application specific sense.
ADR oacRttHistoryCollectionAddress	1.3.6.1.4.1.13191.10.3.4.1223.1.2.1.1.5	OacRttTargetAddress	read-only	History collection address.
TIM oacRttHistoryCollectionSampleTime	1.3.6.1.4.1.13191.10.3.4.1223.1.2.1.1.6	TimeStamp	read-only	History collection sample time.
RTT oacRttHistoryCollectionSense	1.3.6.1.4.1.13191.10.3.4.1223.1.2.1.1.7	RttResponseSense	read-only	History collection sense.
STR oacRttHistoryCollectionSenseDescription	1.3.6.1.4.1.13191.10.3.4.1223.1.2.1.1.8	DisplayString	read-only	History collection sense description.
G32 oacRttHistoryCollectionCompletionTime	1.3.6.1.4.1.13191.10.3.4.1223.1.2.1.1.9	Gauge32	read-only	History collection completion time.
oacRttStats	1.3.6.1.4.1.13191.10.3.4.1223.1.3
oacRttStatsCollectTable	1.3.6.1.4.1.13191.10.3.4.1223.1.3.1		not-accessible	Table for collected statistical information.
oacRttStatsCollectEntry	1.3.6.1.4.1.13191.10.3.4.1223.1.3.1.1		not-accessible	Statistics collection entry.
ADR oacRttStatsCollectAddress	1.3.6.1.4.1.13191.10.3.4.1223.1.3.1.1.1	OacRttTargetAddress	read-only	Collection address.
I32 oacRttStatsCollectNoConnections	1.3.6.1.4.1.13191.10.3.4.1223.1.3.1.1.2	Integer32	read-only	How many times the connection cannot be etabilished.
I32 oacRttStatsCollectBusies	1.3.6.1.4.1.13191.10.3.4.1223.1.3.1.1.3	Integer32	read-only	How many times the connection status was busy.
I32 oacRttStatsCollectTimeouts	1.3.6.1.4.1.13191.10.3.4.1223.1.3.1.1.4	Integer32	read-only	How many timeouts.
I32 oacRttStatsCollectSequenceErrors	1.3.6.1.4.1.13191.10.3.4.1223.1.3.1.1.5	Integer32	read-only	How many sequence errors.
I32 oacRttStatsCollectNumDisconnects	1.3.6.1.4.1.13191.10.3.4.1223.1.3.1.1.6	Integer32	read-only	How many times the connection was disconnected.
I32 oacRttStatsCollectVerifyErrors	1.3.6.1.4.1.13191.10.3.4.1223.1.3.1.1.7	Integer32	read-only	How many verify errors.
I32 oacRttStatsCollectDrops	1.3.6.1.4.1.13191.10.3.4.1223.1.3.1.1.8	Integer32	read-only	How many drops.
oacRttStatsCaptureTable	1.3.6.1.4.1.13191.10.3.4.1223.1.3.2		not-accessible	Statistics capture table.
oacRttStatsCaptureEntry	1.3.6.1.4.1.13191.10.3.4.1223.1.3.2.1		not-accessible	Statistics capture table entry.
TIM oacRttStatsCaptureStartTimeIndex	1.3.6.1.4.1.13191.10.3.4.1223.1.3.2.1.1	TimeStamp	not-accessible	Capture start time index.
I32 oacRttStatsCapturePathIndex	1.3.6.1.4.1.13191.10.3.4.1223.1.3.2.1.2	Integer32	not-accessible	Capture path index.
I32 oacRttStatsCaptureHopIndex	1.3.6.1.4.1.13191.10.3.4.1223.1.3.2.1.3	Integer32	not-accessible	Capture hop index.
I32 oacRttStatsCaptureDistIndex	1.3.6.1.4.1.13191.10.3.4.1223.1.3.2.1.4	Integer32	not-accessible	Identifies buckets for a hop.
G32 oacRttStatsCaptureSumCompletionTime	1.3.6.1.4.1.13191.10.3.4.1223.1.3.2.1.5	Gauge32	read-only	Capture sum completion time.
G32 oacRttStatsCaptureSumCompletionTime2Low	1.3.6.1.4.1.13191.10.3.4.1223.1.3.2.1.6	Gauge32	read-only	Low part of the accumulated squares of completion times.
G32 oacRttStatsCaptureSumCompletionTime2High	1.3.6.1.4.1.13191.10.3.4.1223.1.3.2.1.7	Gauge32	read-only	High part of the accumulated squares of completion times.
G32 oacRttStatsCaptureCompletionTimeMin	1.3.6.1.4.1.13191.10.3.4.1223.1.3.2.1.8	Gauge32	read-only	Minimum completion time.
G32 oacRttStatsCaptureCompletionTimeMax	1.3.6.1.4.1.13191.10.3.4.1223.1.3.2.1.9	Gauge32	read-only	Maximum completion time.
I32 oacRttStatsCaptureOverThresholds	1.3.6.1.4.1.13191.10.3.4.1223.1.3.2.1.10	Integer32	read-only	Capture over tresholds.
I32 oacRttStatsCaptureCompletions	1.3.6.1.4.1.13191.10.3.4.1223.1.3.2.1.11	Integer32	read-only	Number of completed RTT probes.
oacRttStatsTotalsTable	1.3.6.1.4.1.13191.10.3.4.1223.1.3.3		not-accessible	Totals table.
oacRttStatsTotalsEntry	1.3.6.1.4.1.13191.10.3.4.1223.1.3.3.1		not-accessible	Totals table entry.
I32 oacRttStatsTotalsInitiations	1.3.6.1.4.1.13191.10.3.4.1223.1.3.3.1.1	Integer32	read-only	Totals initiations.
NUM oacRttStatsTotalsElapsedTime	1.3.6.1.4.1.13191.10.3.4.1223.1.3.3.1.2	TimeInterval	read-only	Totals elapsed time.
oacRttStatsJitterHopTable	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4		not-accessible	Jitter HOP table.
oacRttStatsJitterHopEntry	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4.1		not-accessible	Jitter HOP table entry.
I32 oacRttStatsJitterPathIndex	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4.1.1	Integer32	not-accessible	Identifies a RTT row in oacRttStatsJitterHopTable along with oacRttStatsJitterHopIndex.
I32 oacRttStatsJitterHopIndex	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4.1.2	Integer32	not-accessible	Identifies a RTT row in oacRttStatsJitterHopTable along with oacRttStatsJitterPathIndex.
IP oacRttStatsJitterHopIpAddress	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4.1.3	InetAddress	read-only	IP Address of the Hop.
I32 oacRttStatsJitterHopRTT	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4.1.4	Integer32	read-only	RTT for the Hop.
I32 oacRttStatsJitterHopPacketLoss	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4.1.5	Integer32	read-only	Packet loss for the Hop.
I32 oacRttStatsJitterHopJitter	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4.1.6	Integer32	read-only	Jitter for the Hop.
I32 oacRttStatsJitterHopMinRTT	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4.1.7	Integer32	read-only	Min RTT for the Hop.
I32 oacRttStatsJitterHopMaxRTT	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4.1.8	Integer32	read-only	Max RTT for the Hop.
I32 oacRttStatsJitterHopSumRTT	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4.1.9	Integer32	read-only	Sum RTT for the Hop.
I32 oacRttStatsJitterHopSum2RTT	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4.1.10	Integer32	read-only	Sum2 RTT for the Hop.
I32 oacRttStatsJitterHopMinPosJitter	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4.1.11	Integer32	read-only	Min pos jitter for the Hop.
I32 oacRttStatsJitterHopMaxPosJitter	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4.1.12	Integer32	read-only	Max pos jitter for the Hop.
I32 oacRttStatsJitterHopSumPos	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4.1.13	Integer32	read-only	Sum pos jitter for the Hop.
I32 oacRttStatsJitterHopSum2Pos	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4.1.14	Integer32	read-only	Sum2 pos jitter for the Hop.
I32 oacRttStatsJitterHopMinNegJitter	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4.1.15	Integer32	read-only	Min neg jitter for the Hop.
I32 oacRttStatsJitterHopMaxNegJitter	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4.1.16	Integer32	read-only	Max neg jitter for the Hop.
I32 oacRttStatsJitterHopSumNeg	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4.1.17	Integer32	read-only	Sum neg jitter for the Hop.
I32 oacRttStatsJitterHopSum2Neg	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4.1.18	Integer32	read-only	Sum2 neg jitter for the Hop.
I32 oacRttStatsJitterHopOutOfSequence	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4.1.19	Integer32	read-only	Out of sequence pkts for the Hop.
I32 oacRttStatsJitterHopDiscardedSamples	1.3.6.1.4.1.13191.10.3.4.1223.1.3.4.1.20	Integer32	read-only	Discarded samples for the Hop.
oacRttAppl	1.3.6.1.4.1.13191.10.3.4.1223.1.4
STR oacRttApplVersion	1.3.6.1.4.1.13191.10.3.4.1223.1.4.1	DisplayString	read-only	Version
oacRttApplSuppRttTypesTable	1.3.6.1.4.1.13191.10.3.4.1223.1.4.2		not-accessible	A table of which contains the supported Rtt Monitor Types.
oacRttApplSuppRttTypesEntry	1.3.6.1.4.1.13191.10.3.4.1223.1.4.2.1		not-accessible	Define valid Rtt Monitor types.
OAC oacRttApplSuppRttTypes	1.3.6.1.4.1.13191.10.3.4.1223.1.4.2.1.1	OacRttApplType	not-accessible	This object indexes the supported 'RttType' types.
T/F oacRttApplSuppRttTypesValid	1.3.6.1.4.1.13191.10.3.4.1223.1.4.2.1.2	TruthValue	read-only	This object defines the supported 'RttMonRttType' types.
oacRttApplSuppProtocolsTable	1.3.6.1.4.1.13191.10.3.4.1223.1.4.3		not-accessible	A table of which contains the supported Rtt Monitor Protocols.
oacRttApplSuppProtocolsEntry	1.3.6.1.4.1.13191.10.3.4.1223.1.4.3.1		not-accessible	A list that presents the valid Rtt Monitor Protocols.
OAC oacRttApplSuppProtocols	1.3.6.1.4.1.13191.10.3.4.1223.1.4.3.1.1	OacRttApplProtocol	not-accessible	This object indexes the supported 'oacRttProtocol' protocols.
T/F oacRttApplSuppProtocolsValid	1.3.6.1.4.1.13191.10.3.4.1223.1.4.3.1.2	TruthValue	read-only	This object defines the supported 'oacRttProtocol' protocols.
oacRttNotificationsPrefix	1.3.6.1.4.1.13191.10.3.4.1223.2
oacRttNotifications	1.3.6.1.4.1.13191.10.3.4.1223.2.0
NTF oacRttConnectionChangeNotification	1.3.6.1.4.1.13191.10.3.4.1223.2.0.1
NTF oacRttTimeoutNotification	1.3.6.1.4.1.13191.10.3.4.1223.2.0.2
NTF oacRttThresholdNotification	1.3.6.1.4.1.13191.10.3.4.1223.2.0.3

RFC description

OneAccess enterprise MIB for monitoring Round Trip Time (RTT) and network latency metrics on their multi-service routers. Provides SNMP objects for measuring network delay, jitter, and packet loss characteristics for network performance monitoring.

Start monitoring OneAccess CPE router (active WAN round-trip-time probing) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OneAccess-RoundTripTime-MIB