OVERLAND-NEXTGEN

All MIBs › OVERLAND-NEXTGEN

Organization: Overland Data, Inc.

Last Updated: 1998-07-09

Category: Storage

Description: Provides SNMP management objects for Overland Data NextGen tape library storage system monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OVERLAND-NEXTGEN?

OVERLAND-NEXTGEN is an Overland Data, Inc. proprietary MIB (central registration module for the 'NEXTGEN' tape-library family) reporting tape drive/library hardware status. Its objects cover a loopback test object, a drive-status table (row-valid flag, index, state, motion, drive/controller firmware revision, SCSI ID, serial number, clean-requested flag), a library-status table (index, config, SCSI ID, status, changer status, library state), and an error table (index, code, severity). As a hardware-status MIB it lets an administrator confirm tape-drive cleaning status and review recent library error codes on an Overland Data tape library. It is deployed on Overland Data, Inc. NEXTGEN tape-library equipment. Engineers can download the OVERLAND-NEXTGEN file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OVERLAND-NEXTGEN. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Overland Data, Inc. NEXTGEN tape-library equipment

Monitoring Examples

An administrator checks dstCleanRequested and errorTable to confirm whether a tape drive needs cleaning and review recent errors on an Overland Data NEXTGEN library.

What Can Be Monitored

tape drive/library hardware status and error codes

Imported Objects

From SNMPv2-CONF

NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
overlandRoot	1.3.6.1.4.1.3351.1
overlandReg	1.3.6.1.4.1.3351.1.1
overlandModules	1.3.6.1.4.1.3351.1.1.1
overlandGlobalRegModule	1.3.6.1.4.1.3351.1.1.1.1			The Overland Data central registration module.
overlandGeneric	1.3.6.1.4.1.3351.1.2
overlandProducts	1.3.6.1.4.1.3351.1.3
overlandNextGen	1.3.6.1.4.1.3351.1.3.2
overlandNextGenActions	1.3.6.1.4.1.3351.1.3.2.1
STR overlandLoopback	1.3.6.1.4.1.3351.1.3.2.1.1	DisplayString	read-write	Sends or retrieves a loopback string to the target.
overlandNextGenStatistics	1.3.6.1.4.1.3351.1.3.2.2
overlandNextGenState	1.3.6.1.4.1.3351.1.3.2.3
driveStatusTable	1.3.6.1.4.1.3351.1.3.2.3.1		not-accessible	Table containing various drive status.
driveStatusEntry	1.3.6.1.4.1.3351.1.3.2.3.1.1		not-accessible	A row in the drive status table.
STR dstRowValid	1.3.6.1.4.1.3351.1.3.2.3.1.1.1	DisplayString	read-only	Provides an INVALID indication if no drives are installed or if the drive type is unknown; otherwise, an indication of the drive type is provided.
I32 dstIndex	1.3.6.1.4.1.3351.1.3.2.3.1.1.2	Integer32	read-only	Index to drive status fields.
INT dstState	1.3.6.1.4.1.3351.1.3.2.3.1.1.3	INTEGER	read-only	Current state of the drive.
STR dstMotion	1.3.6.1.4.1.3351.1.3.2.3.1.1.4	DisplayString	read-only	ASCII msg describing current drive tape motion.
I32 dstCodeRevDrive	1.3.6.1.4.1.3351.1.3.2.3.1.1.5	Integer32	read-only	Revision number of the drive code.
I32 dstCodeRevController	1.3.6.1.4.1.3351.1.3.2.3.1.1.6	Integer32	read-only	Revision number of the drive controller code.
I32 dstScsiId	1.3.6.1.4.1.3351.1.3.2.3.1.1.7	Integer32	read-only	SCSI Id number of drive.
STR dstSerialNum	1.3.6.1.4.1.3351.1.3.2.3.1.1.8	DisplayString	read-only	Serial number of this drive.
INT dstCleanRequested	1.3.6.1.4.1.3351.1.3.2.3.1.1.9	INTEGER	read-only	The drive heads needs to be cleaned with a cleaning cartridge.
libraryStatusTable	1.3.6.1.4.1.3351.1.3.2.3.2		not-accessible	Table containing fault code, severity and ACSII error messages displayed on front panel of library.
libraryStatusEntry	1.3.6.1.4.1.3351.1.3.2.3.2.1		not-accessible	A row in the library status table.
I32 lstIndex	1.3.6.1.4.1.3351.1.3.2.3.2.1.1	Integer32	read-only	Index to table of library status.
INT lstConfig	1.3.6.1.4.1.3351.1.3.2.3.2.1.2	INTEGER	read-only	Indicates if library is standalone or multi-module.
I32 lstScsiId	1.3.6.1.4.1.3351.1.3.2.3.2.1.3	Integer32	read-only	Indicates library SCSI bus ID.
STR lstStatus	1.3.6.1.4.1.3351.1.3.2.3.2.1.4	DisplayString	read-only	Indication of current library status.
I32 lstChangerStatus	1.3.6.1.4.1.3351.1.3.2.3.2.1.5	Integer32	read-only	Bit-mapped indication of current changer status: bit 0 - cartridge map valid bit 1 - initializing bit 2 - door open bit 3 - front panel mode bit 4 - door closed bit 5 - browser mode bit 6 - master busy
INT lstLibraryState	1.3.6.1.4.1.3351.1.3.2.3.2.1.6	INTEGER	read-only	Indication of current library state.
errorTable	1.3.6.1.4.1.3351.1.3.2.3.3		not-accessible	Table containing fault code, severity and ACSII error messages displayed on front panel of library.
errorEntry	1.3.6.1.4.1.3351.1.3.2.3.3.1		not-accessible	A row in the error info table.
I32 errIndex	1.3.6.1.4.1.3351.1.3.2.3.3.1.1	Integer32	read-only	Index to table of library error information.
I32 errCode	1.3.6.1.4.1.3351.1.3.2.3.3.1.2	Integer32	read-only	Hex code unique to the reported error.
INT errSeverity	1.3.6.1.4.1.3351.1.3.2.3.3.1.3	INTEGER	read-only	Indication of how serious the reported error is: 0 = informational error, not very severe 1 = mild error, operator intervention not necessary 2 = hard error, may be corrected remotely 3 = very severe, power cycle required to clear
STR errMsg	1.3.6.1.4.1.3351.1.3.2.3.3.1.4	DisplayString	read-only	ASCII message naming the current error.
STR errActionMsg	1.3.6.1.4.1.3351.1.3.2.3.3.1.5	DisplayString	read-only	ASCII message providing additional information about current error and possibly some suggestions for correcting it.
overlandNextGenComponents	1.3.6.1.4.1.3351.1.3.2.4
overlandNextGenAttributes	1.3.6.1.4.1.3351.1.3.2.5
I32 numModules	1.3.6.1.4.1.3351.1.3.2.5.1	Integer32	read-only	Reads the total number of modules available in the attached library.
I32 numBins	1.3.6.1.4.1.3351.1.3.2.5.2	Integer32	read-only	Reads the total number of cartridge storage slots available in the attached library.
I32 numDrives	1.3.6.1.4.1.3351.1.3.2.5.3	Integer32	read-only	Reads the total number of drives available in the attached library.
I32 numMailSlots	1.3.6.1.4.1.3351.1.3.2.5.4	Integer32	read-only	Returns the total number of mail slots available in the attached library.
moduleGeometryTable	1.3.6.1.4.1.3351.1.3.2.5.5		not-accessible	Table containing library module geometry.
moduleGeometryEntry	1.3.6.1.4.1.3351.1.3.2.5.5.1		not-accessible	A row in the library module geometry table.
STR modDesc	1.3.6.1.4.1.3351.1.3.2.5.5.1.1	DisplayString	read-only	If library geometry is valid, an ASCII message desribing the module.
I32 modIndex	1.3.6.1.4.1.3351.1.3.2.5.5.1.2	Integer32	read-only	Index to table of library module geometry: 8 = Master or Standalone module 0-7 = Slave Module
INT modAttached	1.3.6.1.4.1.3351.1.3.2.5.5.1.3	INTEGER	read-only	Indication of whether or not module is attached.
STR modStatus	1.3.6.1.4.1.3351.1.3.2.5.5.1.4	DisplayString	read-only	ASCII message desribing the current status of the module.
INT modConfig	1.3.6.1.4.1.3351.1.3.2.5.5.1.5	INTEGER	read-only	Indication of this module's type.
I32 modFwRev	1.3.6.1.4.1.3351.1.3.2.5.5.1.6	Integer32	read-only	Indication of this module's firmware revision level.
I32 modNumBins	1.3.6.1.4.1.3351.1.3.2.5.5.1.7	Integer32	read-only	Indication of the number of bins within this module.
I32 modNumDrives	1.3.6.1.4.1.3351.1.3.2.5.5.1.8	Integer32	read-only	Indication of the number of drives within this module.
I32 modNumMailSlots	1.3.6.1.4.1.3351.1.3.2.5.5.1.9	Integer32	read-only	Indication of the number of mailslots within this module.
overlandNextGenEvents	1.3.6.1.4.1.3351.1.3.2.6
NTF eventDoorOpen	1.3.6.1.4.1.3351.1.3.2.6.1			A library door has been opened.
NTF eventMailSlotAccessed	1.3.6.1.4.1.3351.1.3.2.6.2			A mail slot is being accessed.
NTF eventHardFault	1.3.6.1.4.1.3351.1.3.2.6.3			The library has posted a hard fault.
NTF eventSlaveFailed	1.3.6.1.4.1.3351.1.3.2.6.4			A slave module has faulted.
NTF eventPowerSupplyFailed	1.3.6.1.4.1.3351.1.3.2.6.5			One of the redundant power supplies has failed.
NTF eventRequestDriveClean	1.3.6.1.4.1.3351.1.3.2.6.6			One of the library tape drives has requested a cleaning cycle to ensure continued data reliability.
NTF eventFanStalled	1.3.6.1.4.1.3351.1.3.2.6.7			A tape drive fan has stalled.
NTF eventDriveError	1.3.6.1.4.1.3351.1.3.2.6.8			A tape drive error has occurred.
NTF eventDriveRemoved	1.3.6.1.4.1.3351.1.3.2.6.9			A tape drive has been removed from the library.
NTF eventSlaveRemoved	1.3.6.1.4.1.3351.1.3.2.6.10			A slave module has been removed from the library.
NTF eventFailedOver	1.3.6.1.4.1.3351.1.3.2.6.11			The library is failed over to the Secondary Master.
NTF eventLoaderRetriesExcessive	1.3.6.1.4.1.3351.1.3.2.6.12			The library has detected excessive loader retries.
overlandNextGenGroups	1.3.6.1.4.1.3351.1.3.2.7
overlandActionGroup	1.3.6.1.4.1.3351.1.3.2.7.1			Current library status which may be queried.
overlandStateGroup	1.3.6.1.4.1.3351.1.3.2.7.3			Current library states which may be queried.
overlandAttributesGroup	1.3.6.1.4.1.3351.1.3.2.7.4			Current library info which may be queried.
overlandNotificationGroup	1.3.6.1.4.1.3351.1.3.2.7.7			Trap events returned by the browser.
overlandCaps	1.3.6.1.4.1.3351.1.4
overlandReqs	1.3.6.1.4.1.3351.1.5
overlandExpr	1.3.6.1.4.1.3351.1.6

RFC description

Overland Data tape library management providing drive status, statistics, and system component monitoring.

Start monitoring Overland Data, Inc. NEXTGEN tape-library equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OVERLAND-NEXTGEN

What Is OVERLAND-NEXTGEN?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description