PRVT-RIP-EXTENSION-MIB

All MIBs › PRVT-RIP-EXTENSION-MIB

Organization: BATM Advanced Communication

Last Updated: 2008-01-01

Category: Routing

Description: Provides BATM Advanced Communication RIP routing protocol extensions including additional interface timers and route filtering.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PRVT-RIP-EXTENSION-MIB?

PRVT-RIP-EXTENSION-MIB is a BATM Advanced Communication proprietary MIB (built on PRVT-SWITCH-MIB) extending RIP (Routing Information Protocol) configuration beyond the standard RFC MIB. Its objects cover a global RIP-enable flag and a route-redistribution table (protocol, metric, route map, row status). As a configuration MIB it lets an administrator confirm which routes from other protocols are redistributed into RIP, and with what metric, on a BATM device. It is deployed on BATM Advanced Communication networking equipment (RIP redistribution). Engineers can download the PRVT-RIP-EXTENSION-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PRVT-RIP-EXTENSION-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

BATM Advanced Communication networking equipment (RIP redistribution)

Monitoring Examples

An administrator checks ripRedistributeMetric and ripRedistributeProtocol to confirm which routing protocol is being redistributed into RIP on a BATM device.

What Can Be Monitored

RIP route-redistribution configuration

Imported Objects

From PRVT-SWITCH-MIB

ipSwitch

OBJECT-IDENTITY

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
routingProtocols	1.3.6.1.4.1.738.1.6.4
prvtRIPExtensionMib	1.3.6.1.4.1.738.1.6.4.1			The RIP extension MIB module contains additional information, needed to control the RIP protocol, that is not found in the standard RFC
ripExtension	1.3.6.1.4.1.738.1.6.4.1.1
T/F ripEnable	1.3.6.1.4.1.738.1.6.4.1.1.1	TruthValue	read-write	This object enables/disables the RIP process in the switch
ripRedistributeTable	1.3.6.1.4.1.738.1.6.4.1.1.2		not-accessible	The table represents the routing protocols, redistributed into the RIP routing domain. Creation of conceptual row in the table starts the redistribution of the specified protocol, which would lead to the injection of routing information from that protocol into RIP. Deletion of conceptual row would stop the redistribution of that protocol into RIP.
ripRedistributeEntry	1.3.6.1.4.1.738.1.6.4.1.1.2.1		not-accessible	The conceptual row represents a routing protocol, redistributed into RIP
INT ripRedistributeProtocol	1.3.6.1.4.1.738.1.6.4.1.1.2.1.1	INTEGER	read-only	The specific routes redistributed into RIP. For T4R models the valid values are connected, static and OSPF. For T5 the valid values are kernel, connected, static and OSPF. For T5RN, T5Pro, T6, and E-series and G-series all of the above routes can be redistributed
INT ripRedistributeMetric	1.3.6.1.4.1.738.1.6.4.1.1.2.1.2	INTEGER	read-create	The metric, with which the external routes will be redistributed in the RIP
OCT ripRedistributeRouteMap	1.3.6.1.4.1.738.1.6.4.1.1.2.1.3	OCTET STRING	read-create	The route map that would filter the redistributed routing information
ROW ripRedistributeRowStatus	1.3.6.1.4.1.738.1.6.4.1.1.2.1.4	RowStatus	read-create	Indicates the status of the row. Setting of this field to active enables the redistribution of the protocol. Setting this field to destroy disables the redistribution of the protocol

RFC description

BATM private MIB for managing RIP (Routing Information Protocol) extensions on Ethernet and fast Ethernet switches.

Start monitoring BATM Advanced Communication networking equipment (RIP redistribution) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PRVT-RIP-EXTENSION-MIB

What Is PRVT-RIP-EXTENSION-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description