ONEACCESS-MISC-CONFIG-MIB

All MIBs › ONEACCESS-MISC-CONFIG-MIB

Organization: OneAccess

Last Updated: 2011-07-26

Category: CPE/Router

Description: Provides miscellaneous system configuration and operational objects for OneAccess CPE routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ONEACCESS-MISC-CONFIG-MIB?

ONEACCESS-MISC-CONFIG-MIB is a vendor MIB from OneAccess covering miscellaneous system configuration and operational objects for OneAccess customer premises equipment (CPE) routers used in managed enterprise WAN services. It exposes a grab-bag of general configuration and operational parameters that did not fit into more specific OneAccess MIBs, potentially including system-level settings and status flags for the CPE. In monitoring terms such a catch-all configuration MIB is typically used to confirm device-wide settings are as expected and, where operational status objects are present, to check general system health or operating mode, though without concrete grounding data its exact coverage of hardware indicators like CPU, memory, or power cannot be confirmed. It likely depends on OneAccess's broader proprietary MIB family and standard SNMPv2 SMI conventions for its object definitions. It is typically deployed on OneAccess CPE routers installed at customer sites as part of managed WAN/MPLS access services. Network engineers evaluating or troubleshooting this functionality can download the ONEACCESS-MISC-CONFIG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ONEACCESS-MISC-CONFIG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

OneAccess CPE router

Monitoring Examples

No sample objects were provided for this module, so no concrete object or table names can be cited with confidence. In practice an operator managing a fleet of OneAccess CPE devices would poll this MIB's miscellaneous configuration objects to confirm consistent settings across sites and to catch a device that has drifted from its standard configuration template. Any specific object names beyond this general description would be speculative given the lack of grounding data.

What Can Be Monitored

miscellaneous system configuration settings
device operational mode/status flags

Imported Objects

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero

From ONEACCESS-GLOBAL-REG

oacExpIMIpAcl	OBJECT-IDENTITY
oacExpIMManagement	OBJECT-IDENTITY
oacMIBModules	OBJECT-IDENTITY

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
PhysAddress
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
oacMiscConfigMIB	1.3.6.1.4.1.13191.1.100.2003			Fixed the issues related to octet string range
oacMiscConfig	1.3.6.1.4.1.13191.10.3.4.21
oacTelnetServerConfigObjects	1.3.6.1.4.1.13191.10.3.4.21.1
oacTelnetServerBindInterfaceTable	1.3.6.1.4.1.13191.10.3.4.21.1.1		not-accessible	This is for displaying all the users who are logged into device.
oacTelnetServerBindInterfaceEntry	1.3.6.1.4.1.13191.10.3.4.21.1.1.1		not-accessible	Each entry in the table is identified by the unique session id.
NUM oacTelnetServerBindInterfaceIndex	1.3.6.1.4.1.13191.10.3.4.21.1.1.1.1	InterfaceIndex	read-create	The interface index to which the Telnet server will bind.
OCT oacTelnetServerBindInterfaceName	1.3.6.1.4.1.13191.10.3.4.21.1.1.1.2	OCTET STRING	read-create	The name of the interface to which the telnet server will bind.
ROW oacTelnetServerBindInterfaceRowStatus	1.3.6.1.4.1.13191.10.3.4.21.1.1.1.3	RowStatus	read-create	Row status for this entry
OCT oacTelnetServerBindAcl	1.3.6.1.4.1.13191.10.3.4.21.1.2	OCTET STRING	read-write	It is possible to restrict access to telnet clients by using a list of addresses standing for the list of permitted source IP addresses.
U32 oacTelnetServerIdleTimeout	1.3.6.1.4.1.13191.10.3.4.21.1.3	Unsigned32	read-write	If a connected telnet client is inactive during a certain time, it is disconnected. By default, any inactive telnet client is disconnected after 10 minutes.
T/F oacTelnetServerLogEnable	1.3.6.1.4.1.13191.10.3.4.21.1.4	TruthValue	read-write	Remote connections to the telnet server can be logged by enabling log enable.
INT oacTelnetServerLogFileSize	1.3.6.1.4.1.13191.10.3.4.21.1.5	INTEGER	read-write	By default, the log file size is 8200 bytes.
oacSyslogServerConfigObjects	1.3.6.1.4.1.13191.10.3.4.21.2
oacSyslogServerTable	1.3.6.1.4.1.13191.10.3.4.21.2.1		not-accessible	Table to configure remote syslog servers.
oacSyslogServerEntry	1.3.6.1.4.1.13191.10.3.4.21.2.1.1		not-accessible	An entry for a syslog server.
OCT oacSyslogServerAddress	1.3.6.1.4.1.13191.10.3.4.21.2.1.1.1	OCTET STRING	read-create	The remote syslog server IP address, or hostname.
INT oacSyslogServerFacilityNum	1.3.6.1.4.1.13191.10.3.4.21.2.1.1.2	INTEGER	read-create	facility number, ranging from 0 up to 23. Must be set according to the server configuration
NUM oacSyslogServerInterface	1.3.6.1.4.1.13191.10.3.4.21.2.1.1.3	InterfaceIndex	read-create	The interface which this syslog client should used to send log messages to the configured remote syslog server.
ROW oacSyslogServerRowStatus	1.3.6.1.4.1.13191.10.3.4.21.2.1.1.4	RowStatus	read-create	Row status for this entry
INT oacSyslogMaxServers	1.3.6.1.4.1.13191.10.3.4.21.2.2	INTEGER	read-write	maximum number of syslog servers that can be configured.
oacSntpClientConfigObjects	1.3.6.1.4.1.13191.10.3.4.21.3
T/F oacSntpClientBroadcastEnable	1.3.6.1.4.1.13191.10.3.4.21.3.1	TruthValue	read-write	To configure the SNTP client in broadcast mode to accept NTP packets from any NTP broadcast server.
oacSntpRemoteServerTable	1.3.6.1.4.1.13191.10.3.4.21.3.2		not-accessible	Table to configure the SNTP client to request NTP packets from a specified NTP server
oacSntpRemoteServerEntry	1.3.6.1.4.1.13191.10.3.4.21.3.2.1		not-accessible	Entry for the remote sntp server.
OCT oacSntpRemoteServerAddress	1.3.6.1.4.1.13191.10.3.4.21.3.2.1.1	OCTET STRING	read-create	The sntp remote server info.
NUM oacSntpRemoteServerInterface	1.3.6.1.4.1.13191.10.3.4.21.3.2.1.2	InterfaceIndex	read-create	Interface thru which the client requests the ntp servers.
ROW oacSntpRemoteServerRowStatus	1.3.6.1.4.1.13191.10.3.4.21.3.2.1.3	RowStatus	read-create	Row status for this entry
U32 oacSntpClientPollInterval	1.3.6.1.4.1.13191.10.3.4.21.3.3	Unsigned32	read-write	The duration between two requests sent to the NTP server when synchronized.
oacBannerConfigObjects	1.3.6.1.4.1.13191.10.3.4.21.4
oacConfigBannerSeqTable	1.3.6.1.4.1.13191.10.3.4.21.4.1		not-accessible	This table holds upto 40 banner messages.
oacConfigBannerSeqEntry	1.3.6.1.4.1.13191.10.3.4.21.4.1.1		not-accessible	Each entry will hold one banner string
INT oacConfigBannerType	1.3.6.1.4.1.13191.10.3.4.21.4.1.1.1	INTEGER	read-create	motd is for the text displayed when attempting to log in, whereas exec is for the text displayed when logged in.
INT oacConfigBannerSequence	1.3.6.1.4.1.13191.10.3.4.21.4.1.1.2	INTEGER	read-create	The maximum number of strings that can be stored are 40.
OCT oacConfigBannerString	1.3.6.1.4.1.13191.10.3.4.21.4.1.1.3	OCTET STRING	read-create	banner test is a set of string maximum upto 255 characters.
ROW oacConfigBannerSeqRowStatus	1.3.6.1.4.1.13191.10.3.4.21.4.1.1.4	RowStatus	read-create	The row status of this entry
OCT oacConfigMotdBanner	1.3.6.1.4.1.13191.10.3.4.21.4.2	OCTET STRING	read-write	banner text without a sequence number displayed when attempting to login.
OCT oacConfigExecBanner	1.3.6.1.4.1.13191.10.3.4.21.4.3	OCTET STRING	read-write	banner text without a sequence number displayed when logged in.
oacDateAndTimeConfigObjects	1.3.6.1.4.1.13191.10.3.4.21.5
DAT oacMiscConfigDateAndTime	1.3.6.1.4.1.13191.10.3.4.21.5.1	DateAndTime	read-write	Current date and time
oacConfigClockDstTable	1.3.6.1.4.1.13191.10.3.4.21.5.2		not-accessible	Entry for day light saving this table
oacConfigClockDstEntry	1.3.6.1.4.1.13191.10.3.4.21.5.2.1		not-accessible	Entry for this table.
OCT oacClockDstName	1.3.6.1.4.1.13191.10.3.4.21.5.2.1.1	OCTET STRING	read-create	oacClockDstName is an arbitrary string that can ease readability.
OCT oacClockDstSummerStartWeek	1.3.6.1.4.1.13191.10.3.4.21.5.2.1.2	OCTET STRING	read-create	designates the week when the summer time starts
OCT oacClockDstSummerStartDate	1.3.6.1.4.1.13191.10.3.4.21.5.2.1.3	OCTET STRING	read-create	Summer day light saving start date
OCT oacClockDstWinterStartWeek	1.3.6.1.4.1.13191.10.3.4.21.5.2.1.4	OCTET STRING	read-create	designates the week when the winter time starts
OCT oacClockDstWinterStartDate	1.3.6.1.4.1.13191.10.3.4.21.5.2.1.5	OCTET STRING	read-create	Winter day light saving start time.
ROW oacClockDstRowStatus	1.3.6.1.4.1.13191.10.3.4.21.5.2.1.6	RowStatus	read-create	RowStatus for this entry.
oacMiscConfigConformance	1.3.6.1.4.1.13191.10.3.4.21.6
oacMiscConfigGroups	1.3.6.1.4.1.13191.10.3.4.21.6.1
oacMiscConfigGroup	1.3.6.1.4.1.13191.10.3.4.21.6.1.1			Group of Misc Configuration objects.
oacMiscCompls	1.3.6.1.4.1.13191.10.3.4.21.6.2

RFC description

Vendor-private MIB for OneAccess edge networking devices, providing miscellaneous configuration management objects.

Start monitoring OneAccess CPE router (miscellaneous system configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ONEACCESS-MISC-CONFIG-MIB

What Is ONEACCESS-MISC-CONFIG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description