OMNITRON-POE-MIB

All MIBs › OMNITRON-POE-MIB

Organization: Omnitron Systems Technology, Inc.

Last Updated: 2015-01-19

Category: Media Converters

Description: Provides SNMP management objects for Power-over-Ethernet capabilities on Omnitron Systems media converter devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OMNITRON-POE-MIB?

OMNITRON-POE-MIB is a proprietary MIB from Omnitron Systems Technology for managing Power-over-Ethernet (PoE) capability on its iConverter media converter product line, used together with the iConverter Management Modules and NetOutlook management software. It exposes both global PoE configuration (total power budget, power-limitation enable) and per-port configuration and status, including PSE enable/60W-mode/PD-mode settings, voltage and current supplied per port, PSE operational status, and heartbeat monitoring enable. Its central monitoring value is power-subsystem health at the port level: the PSE status and voltage/current-supplied objects reveal whether a given port is successfully delivering power to a connected powered device, over-budget, or in a fault state, making it directly useful for detecting PoE power delivery failures. It is a self-contained vendor MIB with no strong formal dependency on other standard MIBs beyond typical IF-MIB port indexing conventions. It is typically deployed in enterprise and carrier access networks using Omnitron iConverter media converters to deliver PoE to remote endpoints such as cameras or access points. Engineers can download the OMNITRON-POE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OMNITRON-POE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Omnitron iConverter media converters with PoE modules

Monitoring Examples

An admin would poll ostPoePortCfgTable/ostPoePortCfgEntry indexed by ostPoePortCfgIndex to check ostPoePortPseEnable and ostPoePortPse60wMode per port, then read ostPoePortPseStatus together with ostPoePortPseVoltageSupplied and ostPoePortPseCurrentSupplied to confirm a connected powered device is actually receiving power. A port showing ostPoePortPseStatus indicating a fault while ostPoeGlobalCfgTotalPwr is near its ostPoeGlobalCfgPwrLimitationEnable threshold would reveal the chassis has hit its total power budget and is denying power to that port.

What Can Be Monitored

per-port PSE enable/mode status
per-port voltage and current supplied
per-port PSE fault/operational status
global PoE power budget and limitation status
PD heartbeat monitoring status

Imported Objects

From OMNITRON-TC-MIB

OstFloatValue
OstPortSingleIndex
omnitron	OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
omnitronPoeMib	1.3.6.1.4.1.7342.15			Omnitron PoE MIB for use with iConverter Management Modules v5.2 and NetOutlook. Copyright 2015 Omnitron Systems Technology, Inc. All rights reserved.
ostPoeGlobalCfgTable	1.3.6.1.4.1.7342.15.1
T/F ostPoeGlobalCfgPwrLimitationEnable	1.3.6.1.4.1.7342.15.1.1	TruthValue	read-write	This object specifies whether the PoE PSE power limiting function is enabled. The value 'true' indicates that PoE PSE limiting is enabled. The value 'false' indicates that PoE PSE limiting is disabled.
OST ostPoeGlobalCfgTotalPwr	1.3.6.1.4.1.7342.15.1.2	OstFloatValue	read-only	This object indicates the total power sourced in Watts.
ostPoePortCfgTable	1.3.6.1.4.1.7342.15.2		not-accessible	This table supports the port PoE configurations.
ostPoePortCfgEntry	1.3.6.1.4.1.7342.15.2.1		not-accessible	This is a PoE port configuration table entry.
OST ostPoePortCfgIndex	1.3.6.1.4.1.7342.15.2.1.1	OstPortSingleIndex	not-accessible	An index that is used to identify a specific PoE port number.
INT ostPoePortPseEnable	1.3.6.1.4.1.7342.15.2.1.2	INTEGER	read-write	This object is the PoE PSE port enable. pseDisabled(1) PSE power source is disabled pseEnabled(2) PSE power source is enabled
INT ostPoePortPse60wMode	1.3.6.1.4.1.7342.15.2.1.3	INTEGER	read-write	The object is the PoE PSE 60W mode enable. This is the same control as the physical DIP switch. pse60wNotAvail PSE 60W function not available pse60wAuto(1) PSE 60W auto mode enabled pse60wForce(2) PSE 60W force mode enabled
INT ostPoePortPdMode	1.3.6.1.4.1.7342.15.2.1.4	INTEGER	read-only	This object is the PoE PD classification mode. pdModeNotDetected(1) PD is not detected pdModeNotClassified(2) PD is not classified pdModeFailure(3) PD classification failure pdModeClass0(4) PD is 802.3af Class 0 15W device pdModeClass1(5) PD is 802.3af Class 1 4W device pdModeClass2(6) PD is 802.3af Class 2 7W device pdModeClass3(7) PD is 802.3af Class 3 15W device pdModeClass4(8) PD is 802.3at Class 4 30W device pdMode60W(9) PD is 60W device
OST ostPoePortPseVoltageSupplied	1.3.6.1.4.1.7342.15.2.1.5	OstFloatValue	read-only	This object indicates the voltage output from the PSE port in volts.
OST ostPoePortPseCurrentSupplied	1.3.6.1.4.1.7342.15.2.1.6	OstFloatValue	read-only	This object indicates the current output from the PSE port in mA (milliamps).
INT ostPoePortPseStatus	1.3.6.1.4.1.7342.15.2.1.7	INTEGER	read-write	This object is the PoE PSE port status. notApplicable(1) PD device not connected or port disabled pdNormal(2) PD device is being powered fully pdOverCurrent(3) PD device is consuming too much current pdBrownOut(4) PD device is not fully powered pdInsufficientPower(5) PD device not powered due to lack of power A write to this object restarts the PSE function and classification.
INT ostPoePortHeartbeatEnable	1.3.6.1.4.1.7342.15.2.1.8	INTEGER	read-write	This object is the PoE PSE heartbeat enable. heartbeatDisabled(1) PSE PD heartbeat is disabled heartbeatEnabled(2) PSE PD heartbeat is enabled
IP ostPoePortHeartbeatIpAddress	1.3.6.1.4.1.7342.15.2.1.9	IpAddress	read-write	This object is the PoE PD heartbeat IP address to ping.
U32 ostPoePortHeartbeatInterval	1.3.6.1.4.1.7342.15.2.1.10	Unsigned32	read-write	This object is the PoE PSE PD heartbeat transmission interval in seconds.
U32 ostPoePortHeartbeatErrorDetection	1.3.6.1.4.1.7342.15.2.1.11	Unsigned32	read-write	This object is the PoE PSE PD heartbeat number of consecutively lost heartbeat pings before an errored condition is declared. The number of consecutive error counts is cleared when a valid heartbeat response is received.
INT ostPoePortHeartbeatErrorAction	1.3.6.1.4.1.7342.15.2.1.12	INTEGER	read-write	This object is the PoE PSE heartbeat errored condition action. errorLostIgnored(1) PD heartbeat errored condition is ignored errorRestart(2) PD heartbeat errored condition results in a restart errorShutdown(3) PD heartbeat errored condition results in a shutdown (power removed)
U32 ostPoePortHeartbeatNumberRestarts	1.3.6.1.4.1.7342.15.2.1.13	Unsigned32	read-write	This object is the PoE PSE PD number of restarts when an errored hearbeat condition occurs. This object is only used when ostPoePortHeartbeatErrorAction is configured as 'errorRestart' A value of zero indicates restarts never stop.
INT ostPoEPortHeartbeatStatus	1.3.6.1.4.1.7342.15.2.1.14	INTEGER	read-only	This object is the PoE PSE PD heartbeat status. heartbeatDisabled(1) PSE PD heartbeat is disabled heartbeatAvailable(2) PSE PD heartbeats are being received heartbeatErrored(3) PSE PD heartbeat is in an errored condition heartbeatRestart(4) PSE PD heartbeat error has caused a PSE restart heartbeatShutdown(5) PSE PD heartbeat error has caused a PSE shutdown
U32 ostPoEPortHeartbeatDeferTime	1.3.6.1.4.1.7342.15.2.1.15	Unsigned32	read-write	This object is the PoE heartbeat PSE PD heartbeat transmission delay interval in seconds after the port has been reenabled. The delay is the amount of time after power has been applied before the heartbeat function starts and hence the detection of heartbeat errors.
ostPoeCompliances	1.3.6.1.4.1.7342.15.3
ostPoeCompliance	1.3.6.1.4.1.7342.15.3.2			The compliance statement for the Omnitron PoE MIB.
ostPoeGroups	1.3.6.1.4.1.7342.15.4
ostPoeGroup	1.3.6.1.4.1.7342.15.4.1			Mandatory objects for the PoE functional group.

RFC description

Vendor-specific MIB for Omnitron Power over Ethernet (PoE) management; monitors and controls PoE power delivery on network ports.

Start monitoring Omnitron iConverter media converters with PoE modules with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OMNITRON-POE-MIB

What Is OMNITRON-POE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description