Nortel-MsCarrier-MscPassport-TraceBaseMIB :: mscTraceSessionRowStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-TraceBaseMIB › mscTraceSessionRowStatus

mscTraceSessionRowStatus

Module: Nortel-MsCarrier-MscPassport-TraceBaseMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-TraceBaseMIB::mscTraceSessionRowStatus

OID (numeric): 1.3.6.1.4.1.562.36.2.1.106.3.1.1.1

Node type: OBJECT-TYPE

Type: RowStatus

Access: read-only

Description: This variable is used as the basis for SNMP naming of mscTraceSession components. These components cannot be added nor deleted.

What is mscTraceSessionRowStatus?

mscTraceSessionRowStatus is the RowStatus used as the basis for SNMP naming of mscTraceSession components representing active traces, though the MIB documents these components as read-only and unable to be added or deleted directly by the manager (and notes this subtree is currently not implemented). Admins would use this value only to observe the naming state of an active trace session, since sessions are created implicitly rather than provisioned like mscTrace or mscTraceRcvr rows. For example, this object would report the RowStatus of an active session automatically started when a trace Start command was issued, rather than one an admin created by writing to this object.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.106.3.1.1.1
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-TraceBaseMIB::mscTraceSessionRowStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.106.3.1.1.1.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-TraceBaseMIB::mscTraceSessionRowStatus.1

Start monitoring Nortel MsCarrier MscPassport switch (diagnostic trace/logging subsystem) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-TraceBaseMIB::mscTraceSessionRowStatus OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport switch (diagnostic trace/logging subsystem) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.106mscTraceNortel-MsCarrier-MscPassport-TraceBaseMIB
1.3.6.1.4.1.562.36.2.1.106.3mscTraceSessionNortel-MsCarrier-MscPassport-TraceBaseMIB
1.3.6.1.4.1.562.36.2.1.106.3.1mscTraceSessionRowStatusTableNortel-MsCarrier-MscPassport-TraceBaseMIB
1.3.6.1.4.1.562.36.2.1.106.3.1.1mscTraceSessionRowStatusEntryNortel-MsCarrier-MscPassport-TraceBaseMIB
1.3.6.1.4.1.562.36.2.1.106.3.1.1.1mscTraceSessionRowStatusNortel-MsCarrier-MscPassport-TraceBaseMIB