| OID symbolic | OID numeric | Type | Access | Description |
|---|
| lpOamEnet | 1.3.6.1.4.1.562.2.4.1.12.27 | | | |
| lpOamEnetRowStatusTable | 1.3.6.1.4.1.562.2.4.1.12.27.1 | | not-accessible | This entry controls the addition and deletion of
lpOamEnet components. |
| lpOamEnetRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.12.27.1.1 | | not-accessible | A single entry in the table represents a single
lpOamEnet component. |
| ROW lpOamEnetRowStatus | 1.3.6.1.4.1.562.2.4.1.12.27.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of
lpOamEnet components.
These components can be added and deleted. |
| STR lpOamEnetComponentName | 1.3.6.1.4.1.562.2.4.1.12.27.1.1.2 | DisplayString | read-only | This variable provides the component's string name for
use with the ASCII Console Interface |
| STO lpOamEnetStorageType | 1.3.6.1.4.1.562.2.4.1.12.27.1.1.4 | StorageType | read-only | This variable represents the storage type value for the
lpOamEnet tables. |
| I32 lpOamEnetIndex | 1.3.6.1.4.1.562.2.4.1.12.27.1.1.10 | Integer32 | not-accessible | This variable represents the index for the lpOamEnet tables. |
| lpOamEnetTest | 1.3.6.1.4.1.562.2.4.1.12.27.2 | | | |
| lpOamEnetTestRowStatusTable | 1.3.6.1.4.1.562.2.4.1.12.27.2.1 | | not-accessible | This entry controls the addition and deletion of
lpOamEnetTest components. |
| lpOamEnetTestRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.12.27.2.1.1 | | not-accessible | A single entry in the table represents a single
lpOamEnetTest component. |
| ROW lpOamEnetTestRowStatus | 1.3.6.1.4.1.562.2.4.1.12.27.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of
lpOamEnetTest components.
These components cannot be added nor deleted. |
| STR lpOamEnetTestComponentName | 1.3.6.1.4.1.562.2.4.1.12.27.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for
use with the ASCII Console Interface |
| STO lpOamEnetTestStorageType | 1.3.6.1.4.1.562.2.4.1.12.27.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the
lpOamEnetTest tables. |
| NON lpOamEnetTestIndex | 1.3.6.1.4.1.562.2.4.1.12.27.2.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the lpOamEnetTest tables. |
| lpOamEnetTestOperTable | 1.3.6.1.4.1.562.2.4.1.12.27.2.10 | | not-accessible | This group contains the operational data for the Test component. |
| lpOamEnetTestOperEntry | 1.3.6.1.4.1.562.2.4.1.12.27.2.10.1 | | not-accessible | An entry in the lpOamEnetTestOperTable. |
| INT lpOamEnetTestType | 1.3.6.1.4.1.562.2.4.1.12.27.2.10.1.1 | INTEGER | read-write | This attribute is the type of test to be run. The four types of tests
available are: the port hardware logic test, the configure and dump
memory registers test, the memory mapping test and the Time
Domain Reflectometry (TDR) test.
The possible values of this attribute are:
hardwareLogic: this test checks the port hardware controller for
logic errors in some of the on-chip counters and shift registers.
configuration: this test configures the memory registers of the
hardware controller in a predetermined way and then dumps the
registers and checks their contents for errors.
memoryMap: this test does an extensive test of the memory
structures used by the OAM Ethernet port to verify that they are
configured correctly and are error-free.
tdr: this test is used to detect and locate cable faults caused by either
a short or an open circuit on the coaxial cable. |
| lpOamEnetTestResultsTable | 1.3.6.1.4.1.562.2.4.1.12.27.2.11 | | not-accessible | This group contains all the statistics related attributes of the Test
component. |
| lpOamEnetTestResultsEntry | 1.3.6.1.4.1.562.2.4.1.12.27.2.11.1 | | not-accessible | An entry in the lpOamEnetTestResultsTable. |
| INT lpOamEnetTestCauseOfTermination | 1.3.6.1.4.1.562.2.4.1.12.27.2.11.1.1 | INTEGER | read-only | This attribute records the reason why the test terminated.
The possible values of this attribute are:
testTimeExpired: this value indicates the time allotted for the test to
run has expired which caused the test terminate. If the port is locked
without the forever option then it will remain locked for only five
minutes before being automatically unlocked. If the port unlocks
itself after five minutes while the test is running then this attribute
will be set to testTimeExpired. If the forever option is used then the
test will run until completion, failure, or a Stop command.
stoppedByOperator: this value indicates that the test was terminated
when an operator issued a Stop command.
unknown: this value indicates that the test terminated for an
unknown reason.
neverStarted: this value indicates that the test never started because
the port could not be locked or because there is a hardware failure
preventing the tests from running.
testRunning: this value indicates that the test is currently running.
testComplete: this value indicates that the test completed normally. |
| INT lpOamEnetTestTestResult | 1.3.6.1.4.1.562.2.4.1.12.27.2.11.1.2 | INTEGER | read-only | This attribute records the result of last port test executed on the
OAM Ethernet port. The result can be one of the following values.
pass: the test passed
fail: the test failed
neverRun: the test has not been run
running: the test is running |
| lpOamEnetCidDataTable | 1.3.6.1.4.1.562.2.4.1.12.27.10 | | not-accessible | This group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. |
| lpOamEnetCidDataEntry | 1.3.6.1.4.1.562.2.4.1.12.27.10.1 | | not-accessible | An entry in the lpOamEnetCidDataTable. |
| U32 lpOamEnetCustomerIdentifier | 1.3.6.1.4.1.562.2.4.1.12.27.10.1.1 | Unsigned32 | read-write | This attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers. |
| lpOamEnetIfEntryTable | 1.3.6.1.4.1.562.2.4.1.12.27.11 | | not-accessible | This group contains the provisionable attributes for the ifEntry. |
| lpOamEnetIfEntryEntry | 1.3.6.1.4.1.562.2.4.1.12.27.11.1 | | not-accessible | An entry in the lpOamEnetIfEntryTable. |
| INT lpOamEnetIfAdminStatus | 1.3.6.1.4.1.562.2.4.1.12.27.11.1.1 | INTEGER | read-write | The desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed. |
| NUM lpOamEnetIfIndex | 1.3.6.1.4.1.562.2.4.1.12.27.11.1.2 | InterfaceIndex | read-only | This is the index for the IfEntry. Its value is automatically initialized
during the provisioning process. |
| lpOamEnetProvTable | 1.3.6.1.4.1.562.2.4.1.12.27.12 | | not-accessible | This group contains provisioned attributes for the OamEthernet
component. |
| lpOamEnetProvEntry | 1.3.6.1.4.1.562.2.4.1.12.27.12.1 | | not-accessible | An entry in the lpOamEnetProvTable. |
| LIN lpOamEnetApplicationFramerName | 1.3.6.1.4.1.562.2.4.1.12.27.12.1.1 | Link | read-write | This attribute specifies which Lan Application is running on this
port. |
| INT lpOamEnetSwitchoverOnFailure | 1.3.6.1.4.1.562.2.4.1.12.27.12.1.3 | INTEGER | read-write | This attribute specifies if a CP switchover event should occur if a
port or link failure is detected by the initial test process or if a
steady state link failure is observed.
This attribute can be set to one of the following values:
enabled: This value indicates that a switchover will take place if a
port or link failure is detected.
disabled: This value indicates that a switchover will not take place
if a port or link failure is detected. |
| INT lpOamEnetExtendedStatistics | 1.3.6.1.4.1.562.2.4.1.12.27.12.1.4 | INTEGER | read-write | This attribute specifies if extended statistics are to be collected for
the OamEthernet component.
The extended statistics include: singleCollisionFrames,
multipleCollisionFrames, lateCollisions, excessiveCollisions,
carrierSenseErrors, and clearToSendSignalLoss. These statistics all
require extra processing to gather and store which may have a
negative impact on the overall performance of the OAM Ethernet
port.
If extendedStatistics is set to disabled, then these particular
statistical attributes will be suppressed from display operations. |
| lpOamEnetAdminInfoTable | 1.3.6.1.4.1.562.2.4.1.12.27.13 | | not-accessible | This group contains the attributes pertaining to the vendor of the
equipment. |
| lpOamEnetAdminInfoEntry | 1.3.6.1.4.1.562.2.4.1.12.27.13.1 | | not-accessible | An entry in the lpOamEnetAdminInfoTable. |
| STR lpOamEnetVendor | 1.3.6.1.4.1.562.2.4.1.12.27.13.1.1 | AsciiString | read-write | This is the name of the vendor supplying the facility. |
| lpOamEnetStateTable | 1.3.6.1.4.1.562.2.4.1.12.27.15 | | not-accessible | This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. |
| lpOamEnetStateEntry | 1.3.6.1.4.1.562.2.4.1.12.27.15.1 | | not-accessible | An entry in the lpOamEnetStateTable. |
| INT lpOamEnetAdminState | 1.3.6.1.4.1.562.2.4.1.12.27.15.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component. |
| INT lpOamEnetOperationalState | 1.3.6.1.4.1.562.2.4.1.12.27.15.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle. |
| INT lpOamEnetUsageState | 1.3.6.1.4.1.562.2.4.1.12.27.15.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time. |
| lpOamEnetOperStatusTable | 1.3.6.1.4.1.562.2.4.1.12.27.16 | | not-accessible | This group includes the Operational Status attribute. This attribute
defines the current operational state of this component. |
| lpOamEnetOperStatusEntry | 1.3.6.1.4.1.562.2.4.1.12.27.16.1 | | not-accessible | An entry in the lpOamEnetOperStatusTable. |
| INT lpOamEnetSnmpOperStatus | 1.3.6.1.4.1.562.2.4.1.12.27.16.1.1 | INTEGER | read-only | The current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed. |
| lpOamEnetOperTable | 1.3.6.1.4.1.562.2.4.1.12.27.17 | | not-accessible | This group contains the operational attributes of the OamEthernet
component. |
| lpOamEnetOperEntry | 1.3.6.1.4.1.562.2.4.1.12.27.17.1 | | not-accessible | An entry in the lpOamEnetOperTable. |
| MAC lpOamEnetMacAddress | 1.3.6.1.4.1.562.2.4.1.12.27.17.1.1 | MacAddress | read-only | This attribute indicates the medium access controller (MAC)
address automatically assigned to the OAM Ethernet port by the
system. The MAC address is displayed in canonical format. |
| INT lpOamEnetActiveStatus | 1.3.6.1.4.1.562.2.4.1.12.27.17.1.2 | INTEGER | read-only | This attribute indicates the status of the Oam Ethernet port on the
active CP. |
| INT lpOamEnetStandbyStatus | 1.3.6.1.4.1.562.2.4.1.12.27.17.1.3 | INTEGER | read-only | This attribute indicates the status of the Oam Ethernet port on the
standby CP. |
| lpOamEnetOamEnetStatsTable | 1.3.6.1.4.1.562.2.4.1.12.27.18 | | not-accessible | This group contains statistical attributes for the OamEthernet
component. |
| lpOamEnetOamEnetStatsEntry | 1.3.6.1.4.1.562.2.4.1.12.27.18.1 | | not-accessible | An entry in the lpOamEnetOamEnetStatsTable. |
| C32 lpOamEnetClearToSendSignalLoss | 1.3.6.1.4.1.562.2.4.1.12.27.18.1.14 | Counter32 | read-only | This attribute indicates the number of times that the clear to send
signal was lost when attempting to transmit a frame. This counter
wraps to zero when it exceeds its maximum value.
This attribute is only active if the extendedStatistics attribute is
enabled. |
| C32 lpOamEnetFrameTooShort | 1.3.6.1.4.1.562.2.4.1.12.27.18.1.15 | Counter32 | read-only | This attribute indicates the number of frames received whose length
is less than the allowed minimum frame length. This counter wraps
to zero when it exceeds its maximum value. |
| C32 lpOamEnetNumberOfRxCollisions | 1.3.6.1.4.1.562.2.4.1.12.27.18.1.17 | Counter32 | read-only | This attribute indicates the number of collisions detected during
reception. This counter wraps to zero when it exceeds its maximum
value. |
| C32 lpOamEnetLackOfResourcesDiscards | 1.3.6.1.4.1.562.2.4.1.12.27.18.1.18 | Counter32 | read-only | This attribute indicates the number of good frames discarded
because of a lack of resources available to contain them on the
system. This counter wraps to zero when it exceeds its maximum
value. |
| C32 lpOamEnetOverrunErrors | 1.3.6.1.4.1.562.2.4.1.12.27.18.1.19 | Counter32 | read-only | This attribute indicates the number of frames known to be lost
because the local system bus was not available. This counter wraps
to zero when it exceeds its maximum value. |
| lpOamEnetStatsTable | 1.3.6.1.4.1.562.2.4.1.12.27.19 | | not-accessible | This group contains statistical attributes for the Ethernet component. |
| lpOamEnetStatsEntry | 1.3.6.1.4.1.562.2.4.1.12.27.19.1 | | not-accessible | An entry in the lpOamEnetStatsTable. |
| C32 lpOamEnetAlignmentErrors | 1.3.6.1.4.1.562.2.4.1.12.27.19.1.2 | Counter32 | read-only | The alignmentErrors counter indicates the number of frames received
which were not an integral number of octets in length. Frames will be
checked for alignmentErrors before they are checked for Frame Check
Sequence (FCS) errors. If there is an alignment error, the error will only
be counted here and not in fcsErrors. This counter will wrap around
after it reaches its maximum value. |
| C32 lpOamEnetFcsErrors | 1.3.6.1.4.1.562.2.4.1.12.27.19.1.3 | Counter32 | read-only | The fcsErrors, Frame Check Sequence (FCS) error, counter indicates the
number of frames received which were an integral number of octets in
length and did not pass the FCS check. This counter will wrap around
after it reaches its maximum value. |
| C32 lpOamEnetSingleCollisionFrames | 1.3.6.1.4.1.562.2.4.1.12.27.19.1.4 | Counter32 | read-only | The singleCollisionFrames counter indicates the number of frames
successfully transmitted which experienced exactly one collision. This
counter will wrap around after it reaches its maximum value. |
| C32 lpOamEnetMultipleCollisionFrames | 1.3.6.1.4.1.562.2.4.1.12.27.19.1.5 | Counter32 | read-only | The multipleCollisionFrames counter indicates the number of frames
successfully transmitted which experienced more than one collision.
This counter will wrap around after it reaches its maximum value. |
| C32 lpOamEnetSqeTestErrors | 1.3.6.1.4.1.562.2.4.1.12.27.19.1.6 | Counter32 | read-only | The sqeTestErrors, Signal Quality Error (SQE) Test errors, counter
indicates the number of times the 'SQE Test Error' message has been
generated for the station. This counter will wrap around after it reaches
its maximum value. |
| C32 lpOamEnetDeferredTransmissions | 1.3.6.1.4.1.562.2.4.1.12.27.19.1.7 | Counter32 | read-only | The deferredTransmissions counter indicates the number of frames
which experienced a transmission delay because the medium was busy.
This counter will wrap around after it reaches its maximum value. |
| C32 lpOamEnetLateCollisions | 1.3.6.1.4.1.562.2.4.1.12.27.19.1.8 | Counter32 | read-only | The lateCollisions counter indicates the number of times a collision was
detected later than 512 bit-times into the transmission of a packet. This
counter will wrap around after it reaches its maximum value. |
| C32 lpOamEnetExcessiveCollisions | 1.3.6.1.4.1.562.2.4.1.12.27.19.1.9 | Counter32 | read-only | The excessiveCollisions counter indicates the number of frames which
failed to get transmitted due to excessive collisions. This counter will
wrap around after it reaches its maximum value. |
| C32 lpOamEnetMacTransmitErrors | 1.3.6.1.4.1.562.2.4.1.12.27.19.1.10 | Counter32 | read-only | The Medium Access Controller (MAC) transmit error counter indicates
the number of times that a transmission failed due to internal MAC
transmit errors. This counter will wrap around after it reaches its
maximum value. |
| C32 lpOamEnetCarrierSenseErrors | 1.3.6.1.4.1.562.2.4.1.12.27.19.1.11 | Counter32 | read-only | The carrier sense error counter indicates the number of times that the
carrier sense condition was lost or never asserted when attempting to
transmit a frame. This counter will wrap around after it reaches its
maximum value. |
| C32 lpOamEnetFrameTooLongs | 1.3.6.1.4.1.562.2.4.1.12.27.19.1.12 | Counter32 | read-only | The frame too long counter indicates the number of frames received
which exceeded the maximum frame size. This counter will wrap
around after it reaches its maximum value. |
| C32 lpOamEnetMacReceiveErrors | 1.3.6.1.4.1.562.2.4.1.12.27.19.1.13 | Counter32 | read-only | The Medium Access Controller (MAC) receive error counter indicates
the number of times a receive failed due to internal MAC receive errors.
This counter will wrap around after it reaches its maximum value. |
| oamEthernetMIB | 1.3.6.1.4.1.562.2.4.2.79 | | | |
| oamEthernetGroup | 1.3.6.1.4.1.562.2.4.2.79.1 | | | |
| oamEthernetGroupCA | 1.3.6.1.4.1.562.2.4.2.79.1.27 | | | |
| oamEthernetGroupCA01 | 1.3.6.1.4.1.562.2.4.2.79.1.27.2 | | | |
| oamEthernetGroupCA01A | 1.3.6.1.4.1.562.2.4.2.79.1.27.2.2 | | | |
| oamEthernetCapabilities | 1.3.6.1.4.1.562.2.4.2.79.3 | | | |
| oamEthernetCapabilitiesCA | 1.3.6.1.4.1.562.2.4.2.79.3.27 | | | |
| oamEthernetCapabilitiesCA01 | 1.3.6.1.4.1.562.2.4.2.79.3.27.2 | | | |
| oamEthernetCapabilitiesCA01A | 1.3.6.1.4.1.562.2.4.2.79.3.27.2.2 | | | |
