Nortel-Magellan-Passport-OamEthernetMIB :: lpOamEnetTestType

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-OamEthernetMIB › lpOamEnetTestType

lpOamEnetTestType

Module: Nortel-Magellan-Passport-OamEthernetMIB

OID (symbolic): Nortel-Magellan-Passport-OamEthernetMIB::lpOamEnetTestType

OID (numeric): 1.3.6.1.4.1.562.2.4.1.12.27.2.10.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute is the type of test to be run. The four types of tests available are: the port hardware logic test, the configure and dump memory registers test, the memory mapping test and the Time Domain Reflectometry (TDR) test.

The possible values of this attribute are: hardwareLogic: this test checks the port hardware controller for logic errors in some of the on-chip counters and shift registers.

configuration: this test configures the memory registers of the hardware controller in a predetermined way and then dumps the registers and checks their contents for errors.

memoryMap: this test does an extensive test of the memory structures used by the OAM Ethernet port to verify that they are configured correctly and are error-free.

tdr: this test is used to detect and locate cable faults caused by either a short or an open circuit on the coaxial cable.

What is lpOamEnetTestType?

Selects which diagnostic to run on the OAM Ethernet port: hardwareLogic(0) checks on-chip counters/registers, configuration(1) writes and dumps memory registers to check for errors, memoryMap(2) tests the port's memory structures, or tdr(3) uses Time Domain Reflectometry to locate a cable short or open.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.12.27.2.10.1.1
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-OamEthernetMIB::lpOamEnetTestType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.12.27.2.10.1.1.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-OamEthernetMIB::lpOamEnetTestType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.12.27.2.10.1.1.1 i <value>

Start monitoring Nortel Magellan Passport switch, Ethernet-equipped (OAM Ethernet) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-OamEthernetMIB::lpOamEnetTestType OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport switch, Ethernet-equipped (OAM Ethernet) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.12lpNortel-Magellan-Passport-LogicalProcessorMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.12.27lpOamEnetNortel-Magellan-Passport-OamEthernetMIB
1.3.6.1.4.1.562.2.4.1.12.27.2lpOamEnetTestNortel-Magellan-Passport-OamEthernetMIB
1.3.6.1.4.1.562.2.4.1.12.27.2.10lpOamEnetTestOperTableNortel-Magellan-Passport-OamEthernetMIB
1.3.6.1.4.1.562.2.4.1.12.27.2.10.1lpOamEnetTestOperEntryNortel-Magellan-Passport-OamEthernetMIB
1.3.6.1.4.1.562.2.4.1.12.27.2.10.1.1lpOamEnetTestTypeNortel-Magellan-Passport-OamEthernetMIB