Nortel-Magellan-Passport-LogicalProcessorMIB

All MIBs › Nortel-Magellan-Passport-LogicalProcessorMIB

Category: Nortel Magellan Passport

Description:

Provides SNMP management objects for logical processor resource allocation and status on Nortel Magellan Passport switches.

Imported Objects

From Nortel-Magellan-Passport-StandardTextualConventionsMIB

Counter32
DisplayString
Gauge32
Integer32
InterfaceIndex
PassportCounter64
RowPointer
RowStatus
StorageType
Unsigned32

From Nortel-Magellan-Passport-TextualConventionsMIB

AsciiString
EnterpriseDateAndTime
Hex
Link
NonReplicated

From Nortel-Magellan-Passport-UsefulDefinitionsMIB

components	OBJECT-IDENTITY
passportMIBs	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

What Is Nortel-Magellan-Passport-LogicalProcessorMIB?

This MIB provides SNMP management objects for logical processor resource allocation and status on Nortel Magellan Passport multiservice switches, a legacy Nortel WAN switching platform. It exposes a row-status-driven provisioning table for logical processors along with per-processor identification, card assignment (main vs. spare), and logical processor type, including DS3-related processor variants. Its monitoring emphasis is squarely on hardware/software processing-module status: confirming a logical processor's row status (active, provisioning, or failed), which physical card (main or spare) it maps to, and its processor type, which together reveal whether processing resources are correctly provisioned and whether a failover to a spare card has occurred. Locating a specific Nortel-Magellan-Passport-LogicalProcessorMIB OID such as lpRowStatus or lpMainCard generally requires the vendor's own MIB documentation, since the module depends on Nortel's standard row-status/storage-type conventions (lpStorageType) analogous to RowStatus/StorageType textual conventions from SNMPv2-TC. It is deployed on legacy Nortel Magellan Passport switches used in carrier WAN backbones for multiservice (Frame Relay/ATM/voice) switching.

IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-Magellan-Passport-LogicalProcessorMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

What Can Be Monitored

logical processor row/provisioning status
main vs. spare card assignment
logical processor type
DS3 processor status

Supported Devices

Nortel Magellan Passport multiservice WAN switch

Monitoring Examples

An operator would poll lpRowStatusTable/lpRowStatusEntry to confirm each logical processor's lpRowStatus is active rather than notInService, and cross-reference lpProvTable/lpProvEntry to see whether a processor's lpMainCard or lpSpareCard assignment indicates it has failed over to a spare. lpLogicalProcessorType and the DS3-specific lp entries (e.g., lpDS3) let an admin confirm which processor variant is provisioned per card, useful when diagnosing a card that has switched roles unexpectedly. lpComponentName and lpIndex tie status entries back to specific physical components for fault isolation.

OIDs

OID symbolic	OID numeric	Type	Access	Description
logicalProcessorCapabilities	1.3.6.1.4.1.562.2.4.2.11.3
logicalProcessorCapabilitiesBE	1.3.6.1.4.1.562.2.4.2.11.3.5
logicalProcessorCapabilitiesBE01	1.3.6.1.4.1.562.2.4.2.11.3.5.2
logicalProcessorCapabilitiesBE01A	1.3.6.1.4.1.562.2.4.2.11.3.5.2.2
logicalProcessorGroup	1.3.6.1.4.1.562.2.4.2.11.1
logicalProcessorGroupBE	1.3.6.1.4.1.562.2.4.2.11.1.5
logicalProcessorGroupBE01	1.3.6.1.4.1.562.2.4.2.11.1.5.2
logicalProcessorGroupBE01A	1.3.6.1.4.1.562.2.4.2.11.1.5.2.2
logicalProcessorMIB	1.3.6.1.4.1.562.2.4.2.11
lp	1.3.6.1.4.1.562.2.4.1.12
NUM lpActiveCard	1.3.6.1.4.1.562.2.4.1.12.103.1.1	RowPointer	read-only	This attribute indicates on which card this LP is currently running (if any).
INT lpAdminState	1.3.6.1.4.1.562.2.4.1.12.102.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.102.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT lpAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.102.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
lpCapEntry	1.3.6.1.4.1.562.2.4.1.12.105.1		not-accessible	An entry in the lpCapTable.
lpCapTable	1.3.6.1.4.1.562.2.4.1.12.105		not-accessible	This group contains the operational attributes that specify the processor's capacity levels. When this group exists for an LP component, the attributes are representative of the active Card.
lpCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.101.1		not-accessible	An entry in the lpCidDataTable.
lpCidDataTable	1.3.6.1.4.1.562.2.4.1.12.101		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
STR lpComponentName	1.3.6.1.4.1.562.2.4.1.12.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT lpControlStatus	1.3.6.1.4.1.562.2.4.1.12.102.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
G32 lpCpuUtil	1.3.6.1.4.1.562.2.4.1.12.104.1.2	Gauge32	read-only	This attribute indicates an approximation of the current processor utilization level (expressed as a percentage).
G32 lpCpuUtilAvg	1.3.6.1.4.1.562.2.4.1.12.104.1.3	Gauge32	read-only	This attribute indicates an average processor utilization level over the specified time period, timeInterval. This average is calculated based on one minute CPU utilization averages.
G32 lpCpuUtilAvgMax	1.3.6.1.4.1.562.2.4.1.12.104.1.5	Gauge32	read-only	This attribute indicates the maximum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averages.
G32 lpCpuUtilAvgMin	1.3.6.1.4.1.562.2.4.1.12.104.1.4	Gauge32	read-only	This attribute indicates the minimum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averages.
U32 lpCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.101.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
lpDS1	1.3.6.1.4.1.562.2.4.1.12.7
lpDS1AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.7.12.1		not-accessible	An entry in the lpDS1AdminInfoTable.
lpDS1AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.7.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT lpDS1AdminState	1.3.6.1.4.1.562.2.4.1.12.7.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpDS1AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.7.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
lpDS1Audio	1.3.6.1.4.1.562.2.4.1.12.7.5
STR lpDS1AudioComponentName	1.3.6.1.4.1.562.2.4.1.12.7.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
NON lpDS1AudioIndex	1.3.6.1.4.1.562.2.4.1.12.7.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS1Audio tables.
ROW lpDS1AudioRowStatus	1.3.6.1.4.1.562.2.4.1.12.7.5.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS1Audio components. These components cannot be added nor deleted.
lpDS1AudioRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.5.1.1		not-accessible	A single entry in the table represents a single lpDS1Audio component.
lpDS1AudioRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.5.1		not-accessible	This entry controls the addition and deletion of lpDS1Audio components.
STO lpDS1AudioStorageType	1.3.6.1.4.1.562.2.4.1.12.7.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1Audio tables.
OCT lpDS1AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.7.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
C32 lpDS1BpvErrors	1.3.6.1.4.1.562.2.4.1.12.7.17.1.7	Counter32	read-only	The current count of Bipolar Violations. A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line.
lpDS1Chan	1.3.6.1.4.1.562.2.4.1.12.7.2
G32 lpDS1ChanActualChannelSpeed	1.3.6.1.4.1.562.2.4.1.12.7.2.15.1.1	Gauge32	read-only	This attribute displays the measured link speed of the Channel component.
lpDS1ChanAdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.16.1		not-accessible	An entry in the lpDS1ChanAdminInfoTable.
lpDS1ChanAdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.7.2.16		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT lpDS1ChanAdminState	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpDS1ChanAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN lpDS1ChanApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.7.2.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
OCT lpDS1ChanAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
lpDS1ChanCell	1.3.6.1.4.1.562.2.4.1.12.7.2.3
U32 lpDS1ChanCellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.7.2.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
STR lpDS1ChanCellComponentName	1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 lpDS1ChanCellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
INT lpDS1ChanCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.7.2.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
NON lpDS1ChanCellIndex	1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS1ChanCell tables.
INT lpDS1ChanCellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.7.2.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
lpDS1ChanCellOperEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.3.11.1		not-accessible	An entry in the lpDS1ChanCellOperTable.
lpDS1ChanCellOperTable	1.3.6.1.4.1.562.2.4.1.12.7.2.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpDS1ChanCellProvEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.3.10.1		not-accessible	An entry in the lpDS1ChanCellProvTable.
lpDS1ChanCellProvTable	1.3.6.1.4.1.562.2.4.1.12.7.2.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
G32 lpDS1ChanCellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
ROW lpDS1ChanCellRowStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS1ChanCell components. These components can be added and deleted.
lpDS1ChanCellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1		not-accessible	A single entry in the table represents a single lpDS1ChanCell component.
lpDS1ChanCellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.2.3.1		not-accessible	This entry controls the addition and deletion of lpDS1ChanCell components.
INT lpDS1ChanCellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.7.2.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
C32 lpDS1ChanCellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
lpDS1ChanCellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1		not-accessible	An entry in the lpDS1ChanCellStatsTable.
lpDS1ChanCellStatsTable	1.3.6.1.4.1.562.2.4.1.12.7.2.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO lpDS1ChanCellStorageType	1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1ChanCell tables.
G32 lpDS1ChanCellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 lpDS1ChanCellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
lpDS1ChanCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.11.1		not-accessible	An entry in the lpDS1ChanCidDataTable.
lpDS1ChanCidDataTable	1.3.6.1.4.1.562.2.4.1.12.7.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
STR lpDS1ChanCommentText	1.3.6.1.4.1.562.2.4.1.12.7.2.16.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpDS1ChanComponentName	1.3.6.1.4.1.562.2.4.1.12.7.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT lpDS1ChanControlStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 lpDS1ChanCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.7.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
INT lpDS1ChanIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
lpDS1ChanIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.12.1		not-accessible	An entry in the lpDS1ChanIfEntryTable.
lpDS1ChanIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.7.2.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM lpDS1ChanIfIndex	1.3.6.1.4.1.562.2.4.1.12.7.2.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 lpDS1ChanIndex	1.3.6.1.4.1.562.2.4.1.12.7.2.1.1.10	Integer32	not-accessible	This variable represents the index for the lpDS1Chan tables.
INT lpDS1ChanOperationalState	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
lpDS1ChanOperEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.15.1		not-accessible	An entry in the lpDS1ChanOperTable.
lpDS1ChanOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.13.1		not-accessible	An entry in the lpDS1ChanOperStatusTable.
lpDS1ChanOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.2.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpDS1ChanOperTable	1.3.6.1.4.1.562.2.4.1.12.7.2.15		not-accessible	This group contains all of the operational data for a Channel component.
OCT lpDS1ChanProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
lpDS1ChanProvEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.10.1		not-accessible	An entry in the lpDS1ChanProvTable.
lpDS1ChanProvTable	1.3.6.1.4.1.562.2.4.1.12.7.2.10		not-accessible	This group contains all of the provisional data for a Channel component.
ROW lpDS1ChanRowStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS1Chan components. These components can be added and deleted.
lpDS1ChanRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.1.1		not-accessible	A single entry in the table represents a single lpDS1Chan component.
lpDS1ChanRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.2.1		not-accessible	This entry controls the addition and deletion of lpDS1Chan components.
INT lpDS1ChanSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpDS1ChanStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
lpDS1ChanStateEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1		not-accessible	An entry in the lpDS1ChanStateTable.
lpDS1ChanStateTable	1.3.6.1.4.1.562.2.4.1.12.7.2.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
STO lpDS1ChanStorageType	1.3.6.1.4.1.562.2.4.1.12.7.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1Chan tables.
lpDS1ChanTc	1.3.6.1.4.1.562.2.4.1.12.7.2.4
STR lpDS1ChanTcComponentName	1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
INT lpDS1ChanTcEgressConditioning	1.3.6.1.4.1.562.2.4.1.12.7.2.4.11.1.2	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
NON lpDS1ChanTcIndex	1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS1ChanTc tables.
INT lpDS1ChanTcIngressConditioning	1.3.6.1.4.1.562.2.4.1.12.7.2.4.11.1.1	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
lpDS1ChanTcOpEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.4.11.1		not-accessible	An entry in the lpDS1ChanTcOpTable.
lpDS1ChanTcOpTable	1.3.6.1.4.1.562.2.4.1.12.7.2.4.11		not-accessible	This group contains all specific operational data for a Tc component.
lpDS1ChanTcProvEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.4.10.1		not-accessible	An entry in the lpDS1ChanTcProvTable.
lpDS1ChanTcProvTable	1.3.6.1.4.1.562.2.4.1.12.7.2.4.10		not-accessible	This group contains all specific provisioning data for a Tc component.
HEX lpDS1ChanTcReplacementData	1.3.6.1.4.1.562.2.4.1.12.7.2.4.10.1.1	Hex	read-write	This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
ROW lpDS1ChanTcRowStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS1ChanTc components. These components can be added and deleted.
lpDS1ChanTcRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1		not-accessible	A single entry in the table represents a single lpDS1ChanTc component.
lpDS1ChanTcRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.2.4.1		not-accessible	This entry controls the addition and deletion of lpDS1ChanTc components.
U32 lpDS1ChanTcSignalOneDuration	1.3.6.1.4.1.562.2.4.1.12.7.2.4.10.1.2	Unsigned32	read-write	This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
lpDS1ChanTcSigOneEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.4.398.1		not-accessible	An entry in the lpDS1ChanTcSigOneTable.
INT lpDS1ChanTcSigOneIndex	1.3.6.1.4.1.562.2.4.1.12.7.2.4.398.1.1	INTEGER	not-accessible	This variable represents the lpDS1ChanTcSigOneTable specific index for the lpDS1ChanTcSigOneTable.
lpDS1ChanTcSigOneTable	1.3.6.1.4.1.562.2.4.1.12.7.2.4.398		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
U32 lpDS1ChanTcSigOneValue	1.3.6.1.4.1.562.2.4.1.12.7.2.4.398.1.2	Unsigned32	read-write	This variable represents an individual value for the lpDS1ChanTcSigOneTable.
lpDS1ChanTcSigTwoEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.4.399.1		not-accessible	An entry in the lpDS1ChanTcSigTwoTable.
INT lpDS1ChanTcSigTwoIndex	1.3.6.1.4.1.562.2.4.1.12.7.2.4.399.1.1	INTEGER	not-accessible	This variable represents the lpDS1ChanTcSigTwoTable specific index for the lpDS1ChanTcSigTwoTable.
lpDS1ChanTcSigTwoTable	1.3.6.1.4.1.562.2.4.1.12.7.2.4.399		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
U32 lpDS1ChanTcSigTwoValue	1.3.6.1.4.1.562.2.4.1.12.7.2.4.399.1.2	Unsigned32	read-write	This variable represents an individual value for the lpDS1ChanTcSigTwoTable.
STO lpDS1ChanTcStorageType	1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1ChanTc tables.
lpDS1ChanTest	1.3.6.1.4.1.562.2.4.1.12.7.2.2
INT lpDS1ChanTestAdminState	1.3.6.1.4.1.562.2.4.1.12.7.2.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR lpDS1ChanTestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpDS1ChanTestBitsRx	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpDS1ChanTestBitsTx	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpDS1ChanTestBytesRx	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS1ChanTestBytesTx	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT lpDS1ChanTestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
STR lpDS1ChanTestComponentName	1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX lpDS1ChanTestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpDS1ChanTestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpDS1ChanTestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpDS1ChanTestDuration	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 lpDS1ChanTestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM lpDS1ChanTestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
INT lpDS1ChanTestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM lpDS1ChanTestFrmRx	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 lpDS1ChanTestFrmSize	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM lpDS1ChanTestFrmTx	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON lpDS1ChanTestIndex	1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS1ChanTest tables.
INT lpDS1ChanTestOperationalState	1.3.6.1.4.1.562.2.4.1.12.7.2.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR lpDS1ChanTestPurpose	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
lpDS1ChanTestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1		not-accessible	An entry in the lpDS1ChanTestResultsTable.
lpDS1ChanTestResultsTable	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW lpDS1ChanTestRowStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS1ChanTest components. These components cannot be added nor deleted.
lpDS1ChanTestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1		not-accessible	A single entry in the table represents a single lpDS1ChanTest component.
lpDS1ChanTestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.2.2.1		not-accessible	This entry controls the addition and deletion of lpDS1ChanTest components.
lpDS1ChanTestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1		not-accessible	An entry in the lpDS1ChanTestSetupTable.
lpDS1ChanTestSetupTable	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpDS1ChanTestStateEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.2.10.1		not-accessible	An entry in the lpDS1ChanTestStateTable.
lpDS1ChanTestStateTable	1.3.6.1.4.1.562.2.4.1.12.7.2.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO lpDS1ChanTestStorageType	1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1ChanTest tables.
U32 lpDS1ChanTestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpDS1ChanTestType	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpDS1ChanTestUsageState	1.3.6.1.4.1.562.2.4.1.12.7.2.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpDS1ChanTimeslotDataRate	1.3.6.1.4.1.562.2.4.1.12.7.2.10.1.2	INTEGER	read-write	This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependent on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56kbit/s is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
OCT lpDS1ChanTimeslots	1.3.6.1.4.1.562.2.4.1.12.7.2.10.1.1	OCTET STRING	read-write	This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
INT lpDS1ChanUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpDS1ChanUsageState	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR lpDS1ChanVendor	1.3.6.1.4.1.562.2.4.1.12.7.2.16.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
lpDS1CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.7.11.1		not-accessible	An entry in the lpDS1CidDataTable.
lpDS1CidDataTable	1.3.6.1.4.1.562.2.4.1.12.7.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
INT lpDS1ClockingSource	1.3.6.1.4.1.562.2.4.1.12.7.10.1.3	INTEGER	read-write	This attribute defines the source of the transmit clock for the DS1 line. When local is selected, the crystal on the port generates the clocking for the line. When line is selected, the port synchronizes to the clock from the facility. When module is selected, the ports clock synchronizes to the clock provided by the oscillator on the active CP. When otherPort is selected, the port synchronizes to the port with a clocking source of line. When srtsMode is selected, the port synchronization is taken from the SRTS (Synchronous Residual Time-Stamp) bits extracted from the AAL1 cells. This option is only available for unstructured AAL1 data services when the other ports on the card have their clocking source set to module. If the NetworkSynchronization (NS) component is present the default value of this attribute will be module otherwise it will default to local. Note that 3pDS1Atm cards have one common clock source for all ports and do not support the line clock source; all three ports must have the same value, either local or module.
STR lpDS1CommentText	1.3.6.1.4.1.562.2.4.1.12.7.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpDS1ComponentName	1.3.6.1.4.1.562.2.4.1.12.7.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT lpDS1ControlStatus	1.3.6.1.4.1.562.2.4.1.12.7.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
C32 lpDS1CrcErrors	1.3.6.1.4.1.562.2.4.1.12.7.17.1.8	Counter32	read-only	If the interface is a DS1 line, it is the current count of CRC-6 errors. These will only be counted when the lineType is ESF. If the interface is an E1 line, it is the total number of CRC-4 errors. These will only be counted when crc4Mode is on.
U32 lpDS1CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.7.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
lpDS1Dsp	1.3.6.1.4.1.562.2.4.1.12.7.4
STR lpDS1DspComponentName	1.3.6.1.4.1.562.2.4.1.12.7.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
NON lpDS1DspIndex	1.3.6.1.4.1.562.2.4.1.12.7.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS1Dsp tables.
ROW lpDS1DspRowStatus	1.3.6.1.4.1.562.2.4.1.12.7.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS1Dsp components. These components cannot be added nor deleted.
lpDS1DspRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.4.1.1		not-accessible	A single entry in the table represents a single lpDS1Dsp component.
lpDS1DspRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.4.1		not-accessible	This entry controls the addition and deletion of lpDS1Dsp components.
STO lpDS1DspStorageType	1.3.6.1.4.1.562.2.4.1.12.7.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1Dsp tables.
C32 lpDS1ErroredSec	1.3.6.1.4.1.562.2.4.1.12.7.17.1.3	Counter32	read-only	An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
C32 lpDS1ErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.7.17.1.2	Counter32	read-only	The number of seconds that the port has been in an error free state.
C32 lpDS1FrmErrors	1.3.6.1.4.1.562.2.4.1.12.7.17.1.9	Counter32	read-only	The current count of frame errors. A frame error is an error in the framing bits
INT lpDS1IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.7.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
lpDS1IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.7.13.1		not-accessible	An entry in the lpDS1IfEntryTable.
lpDS1IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.7.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM lpDS1IfIndex	1.3.6.1.4.1.562.2.4.1.12.7.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 lpDS1Index	1.3.6.1.4.1.562.2.4.1.12.7.1.1.10	Integer32	not-accessible	This variable represents the index for the lpDS1 tables.
U32 lpDS1LineLength	1.3.6.1.4.1.562.2.4.1.12.7.10.1.5	Unsigned32	read-write	This attribute defines the line length (in feet) for equalization calculations for the DS1 line. The value ranges between 0-655. For 8pDS1Atm cards the actual value used for equalization is rounded up to the nearest 110 feet; for all other card types the actual value used is rounded to the nearest 50 feet.
INT lpDS1LineType	1.3.6.1.4.1.562.2.4.1.12.7.10.1.1	INTEGER	read-write	This attribute defines the framing of the DS1 line. d4 defines a framing pattern of 12 frames per multiframe. esf defines a framing pattern of 24 frames per multiframe. d4Cas defines a framing pattern of 12 frames per multiframe with channel associated signalling. esfCas defines a framing pattern of 24 frames per multiframe with channel associated signalling. unframed defines an unknown framing pattern for clear channels. For cell-based cards only the default option esf is permitted.
INT lpDS1LofAlarm	1.3.6.1.4.1.562.2.4.1.12.7.16.1.3	INTEGER	read-only	This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (for DS1: 2 out of 5 framing bits in error; for E1: 3 consecutive frame alignment patterns in error) have been detected for 3 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
INT lpDS1LosAlarm	1.3.6.1.4.1.562.2.4.1.12.7.16.1.1	INTEGER	read-only	This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulated for a period of 2 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). A LOS defect is detected upon observing all zeros for 150 ms (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: upon observing 175 +/- 75 pulse positions with no pulses of either positive or negative polarity). If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOS alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOS alarm state. The LOS alarm state is cleared when LOS defects are absent for 10 seconds +/- 0.5 seconds.
C32 lpDS1LosStateChanges	1.3.6.1.4.1.562.2.4.1.12.7.17.1.10	Counter32	read-only	The total number of times that the line lost signal.
INT lpDS1OperationalState	1.3.6.1.4.1.562.2.4.1.12.7.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
lpDS1OperEntry	1.3.6.1.4.1.562.2.4.1.12.7.16.1		not-accessible	An entry in the lpDS1OperTable.
lpDS1OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.14.1		not-accessible	An entry in the lpDS1OperStatusTable.
lpDS1OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpDS1OperTable	1.3.6.1.4.1.562.2.4.1.12.7.16		not-accessible	This group contains the common operational data for a component in a digital hierarchy interface.
OCT lpDS1ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.7.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
lpDS1ProvEntry	1.3.6.1.4.1.562.2.4.1.12.7.10.1		not-accessible	An entry in the lpDS1ProvTable.
lpDS1ProvTable	1.3.6.1.4.1.562.2.4.1.12.7.10		not-accessible	This group contains all of the provisioning data for a DS1 component.
INT lpDS1RaiAlarmType	1.3.6.1.4.1.562.2.4.1.12.7.10.1.4	INTEGER	read-write	This attribute defines the method of sending a RAI (Remote Alarm Indication) alarm on a DS1 line. When SBit is selected, RAI alarm is sent by setting the S bit in frame 12. When Bit2 is selected, RAI alarm is sent by setting bit 2 in all timeslots to 0. When fdl is selected, RAI alarm is sent by a repeating pattern of 00 hex and FF hex on the FDL link. Note that for lineType of d4, only the SBit and the Bit2 methods are applicable. Whereas for lineType of esf, only the Bit2 and the fdl methods are applicable. SBit method is recommended if lineType is set to d4 and zeroCoding is set to ami. This will help to avoid potential mimic RAI alarm when 1's density is too low in the data transmitted. For cell-based cards only the default value fdl is permitted.
ROW lpDS1RowStatus	1.3.6.1.4.1.562.2.4.1.12.7.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS1 components. These components can be added and deleted.
lpDS1RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.1.1		not-accessible	A single entry in the table represents a single lpDS1 component.
lpDS1RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.1		not-accessible	This entry controls the addition and deletion of lpDS1 components.
C32 lpDS1RunningTime	1.3.6.1.4.1.562.2.4.1.12.7.17.1.1	Counter32	read-only	The number of seconds since the port component was activated.
INT lpDS1RxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.7.16.1.2	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both an Out Of Frame condition exists and a 1's density of at least 99.9% is present for a time T, where 3 ms T 75 ms; for 8pE1Atm cards: when both an Out Of Frame condition exists and fewer than three 0's have been received in 512 bit periods). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
INT lpDS1RxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.7.16.1.4	INTEGER	read-only	This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards: alarm is declared immediately upon observing the defect is present, with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm state is entered when the RAI defect indicator has been observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and 8pDS1Atm cards: alarm is cleared immediately upon observing the defect is absent, with no integration time). The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
C32 lpDS1SevErroredFrmSec	1.3.6.1.4.1.562.2.4.1.12.7.17.1.5	Counter32	read-only	A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
C32 lpDS1SevErroredSec	1.3.6.1.4.1.562.2.4.1.12.7.17.1.4	Counter32	read-only	A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
C32 lpDS1SlipErrors	1.3.6.1.4.1.562.2.4.1.12.7.17.1.11	Counter32	read-only	The total number of times that the line experienced a controlled frame slip. This attribute is incremented for ports on the voice cards (for example the 1pDS1V and the 1pE1V function processors) only.
INT lpDS1SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.7.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpDS1StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.7.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
lpDS1StateEntry	1.3.6.1.4.1.562.2.4.1.12.7.15.1		not-accessible	An entry in the lpDS1StateTable.
lpDS1StateTable	1.3.6.1.4.1.562.2.4.1.12.7.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpDS1StatsEntry	1.3.6.1.4.1.562.2.4.1.12.7.17.1		not-accessible	An entry in the lpDS1StatsTable.
lpDS1StatsTable	1.3.6.1.4.1.562.2.4.1.12.7.17		not-accessible	This group contains the common statistical data for a component in a digital hierarchy interface.
STO lpDS1StorageType	1.3.6.1.4.1.562.2.4.1.12.7.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1 tables.
lpDS1Test	1.3.6.1.4.1.562.2.4.1.12.7.3
INT lpDS1TestAdminState	1.3.6.1.4.1.562.2.4.1.12.7.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR lpDS1TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpDS1TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpDS1TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpDS1TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS1TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT lpDS1TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
STR lpDS1TestComponentName	1.3.6.1.4.1.562.2.4.1.12.7.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX lpDS1TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpDS1TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpDS1TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpDS1TestDuration	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 lpDS1TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM lpDS1TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
INT lpDS1TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM lpDS1TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 lpDS1TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM lpDS1TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON lpDS1TestIndex	1.3.6.1.4.1.562.2.4.1.12.7.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS1Test tables.
INT lpDS1TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.7.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR lpDS1TestPurpose	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
lpDS1TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1		not-accessible	An entry in the lpDS1TestResultsTable.
lpDS1TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.7.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW lpDS1TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.7.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS1Test components. These components cannot be added nor deleted.
lpDS1TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.3.1.1		not-accessible	A single entry in the table represents a single lpDS1Test component.
lpDS1TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.3.1		not-accessible	This entry controls the addition and deletion of lpDS1Test components.
lpDS1TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1		not-accessible	An entry in the lpDS1TestSetupTable.
lpDS1TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.7.3.11		not-accessible	This group contains all of the operational data for a Test component.
lpDS1TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.7.3.10.1		not-accessible	An entry in the lpDS1TestStateTable.
lpDS1TestStateTable	1.3.6.1.4.1.562.2.4.1.12.7.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO lpDS1TestStorageType	1.3.6.1.4.1.562.2.4.1.12.7.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1Test tables.
U32 lpDS1TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpDS1TestType	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpDS1TestUsageState	1.3.6.1.4.1.562.2.4.1.12.7.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpDS1TxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.7.16.1.5	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the port is in a locked state.
INT lpDS1TxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.7.16.1.6	INTEGER	read-only	This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port detects a LOF alarm condition (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: RAI is transmitted when the port detects a LOS, LOF, or AIS condition).
C32 lpDS1UnavailSec	1.3.6.1.4.1.562.2.4.1.12.7.17.1.6	Counter32	read-only	The total number of seconds that the interface is in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
INT lpDS1UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.7.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpDS1UsageState	1.3.6.1.4.1.562.2.4.1.12.7.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR lpDS1Vendor	1.3.6.1.4.1.562.2.4.1.12.7.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
INT lpDS1ZeroCoding	1.3.6.1.4.1.562.2.4.1.12.7.10.1.2	INTEGER	read-write	This attribute defines the zero encoding on the DS1 line. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the available bandwidth of the channel by 1/8. b8zs substitutes a pattern of bipolar violations if more than 7 zeros in a row are to be transported. ami specifies Alternate Mark Inversion, in which successive marks (ones) alternate between positive and negative polarity voltage signals, and spaces (zeros) are sent as a zero amplitude signal. When zeroCoding is set to ami and lineType is set to d4, it is recommended that raiAlarmType be set to SBit in order to avoid possible mimic RAI alarm. For cell-based cards only the default value b8zs is permitted.
lpDS3	1.3.6.1.4.1.562.2.4.1.12.5
lpDS3AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.5.12.1		not-accessible	An entry in the lpDS3AdminInfoTable.
lpDS3AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.5.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT lpDS3AdminState	1.3.6.1.4.1.562.2.4.1.12.5.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpDS3AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.5.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN lpDS3ApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.5.10.1.4	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the DS3 component.
OCT lpDS3AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.5.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
lpDS3CBit	1.3.6.1.4.1.562.2.4.1.12.5.3
C32 lpDS3CBitCbitCodeViolations	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.2	Counter32	read-only	This attribute indicates the total count of C-Bit Parity Code Violations (CCV). A CCV is obtained when the parity calculated over the previous DS3 frame and the value of the CP-bits appearing in the current DS3 frame differ. The value of this attribute will wrap around to 0 if it does reach its maximum value. CCV counting is inhibited for second intervals where C-Bit Parity Severely Errored Seconds (CSES) are counted. It is also inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3CBitCbitErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.3	Counter32	read-only	This attribute indicates the total number of C-Bit Parity Errored Seconds (CES). A CES second is declared for second intervals containing one or more CCVs or when one or more SEF (Severely Errored Frame) or AIS (Alarm Indication Signal) defects. CES counting is inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted.
C32 lpDS3CBitCbitErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.1	Counter32	read-only	This attribute indicates the number of seconds that the DS3 port has not suffered any C-Bit errors.
C32 lpDS3CBitCbitSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.4	Counter32	read-only	This attribute indicates the total number of C-Bit Parity Severely Errored Seconds (CSES). A CSES is declared for second intervals containing more than 44 CCVs or one or more SEF or AIS defects. The occurrence of CSES in a one second interval causes the inhibition of CCV counting during that second interval. CSES counting is also inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted.
C32 lpDS3CBitCbitUnavailSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.5	Counter32	read-only	This attribute indicates the total number of one second intervals for which the DS3 path is unavailable. The DS3 path becomes unavailable at the onset of 10 consecutive C-Bit Severely Errored Seconds (CSES). The 10 CSESs are included in the unavailable time. Once unavailable, the DS3 path becomes available at the onset of 10 contiguous seconds with no CSES. The 10 seconds with no CSES are excluded from the unavailable time. For second intervals where CUAS is counted, counting of C-Bit Coding Violations (CCV), C-Bit Errored Seconds (CES) and C-Bit Severely Errored Seconds (CSES) is inhibited.
STR lpDS3CBitComponentName	1.3.6.1.4.1.562.2.4.1.12.5.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
INT lpDS3CBitFarEndAlarm	1.3.6.1.4.1.562.2.4.1.12.5.3.10.1.1	INTEGER	read-only	This attribute indicates the Far-End alarm signal that is currently received at the DS3 interface. This signal is carried over the Far- End Alarm and Control (FEAC) bits of DS3 frames. Five far-end alarm signals can be received: far-end equipment failure that is received when the far-end terminal has detected a local equipment failure; far-end Loss Of Signal (LOS) that is received when the far- end DS3 terminal has declared a LOS failure condition; far-end Loss of Frame (LOF) when the far-end DS3 terminal has declared a Loss Of Frame (LOF) failure condition; far-end Alarm Indication Signal (AIS) when the far-end has declared an AIS failure condition; far-end Idle when the far-end has declared an Idle signal condition.
C32 lpDS3CBitFarEndCodeViolations	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.7	Counter32	read-only	This attribute indicates the total count of DS3 frames containing a Coding Violation on the Far-End (FECV), also known as a Far-End Block Error (FEBE). Each FEBE is reported over the FEBE bits each time the far-end DS3 terminal detects a C-BIT Parity error over a received DS3 frame. For second intervals where Far-End Unavailable Seconds (FEAUS) or Far-End Severely Errored Seconds (FESES) are counted, counting of FECVs is inhibited. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3CBitFarEndErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.8	Counter32	read-only	This attribute indicates the total number of Far-End Errored Seconds (FEES). A FEES is declared for second intervals containing with one or more FECVs or one or more far-end SEF/ AIS defects. A far-end SEF/AIS defect occurs when the X-Bits of the DS3 frame are received as being set to zero. For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FEESs is inhibited.
C32 lpDS3CBitFarEndErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.6	Counter32	read-only	This attribute indicates the number of seconds that the DS3 port has not suffered of any far-end errors.
C32 lpDS3CBitFarEndFailures	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.12	Counter32	read-only	This attribute indicates the total number of times that a far-end path failure (i.e. a Far-End SEF/AIS defect) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3CBitFarEndSefAisSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.10	Counter32	read-only	This attribute indicates the total number of Far-End SEF/AIS Seconds (FESAS). A FESAS is declared for second intervals containing one or more far-end SEF/AIS defects.For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FESASs is inhibited.
C32 lpDS3CBitFarEndSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.9	Counter32	read-only	This attribute indicates the total number of Far-End Severely Errored Seconds (FESES). A FESES is declared for second intervals containing more than 44 FECVs or one or more far-end SEF/AIS defects. For second intervals where a FESES is counted, counting of FECVs is inhibited. For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FESESs is inhibited.
C32 lpDS3CBitFarEndUnavailSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.11	Counter32	read-only	This attribute indicates the total number of one second intervals for which the DS3 far-end path is unavailable. The DS3 far-end path becomes unavailable at the onset of 10 consecutive Far-End Severely Errored Seconds (FESES). The 10 FESESs are included in the unavailable time. Once unavailable, the DS3 far-end path becomes available at the onset of 10 contiguous seconds with no FESES. The 10 seconds with no FESES are excluded from the unavailable time. For second intervals where FEUAS is counted, counting of Far-End Coding Violations (FECV), Far-End Errored Seconds (FEES), Far-End Severely Errored Seconds (FESES) and Far-End Sef/Ais Seconds (FESAS) is inhibited.
NON lpDS3CBitIndex	1.3.6.1.4.1.562.2.4.1.12.5.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3CBit tables.
OCT lpDS3CBitLoopbackAtFarEndRequested	1.3.6.1.4.1.562.2.4.1.12.5.3.10.1.3	OCTET STRING	read-only	This attribute indicates which DS1 tributaries are being looped back, or if the DS3 line is being looped back. Each value listed indicates a loopback request has been made. When a loopback deactivation command has been sent to the far end, the corresponding value will be removed from the list. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) notused29(29) notused30(30) ds3Line(31)
OCT lpDS3CBitLoopedbackToFarEnd	1.3.6.1.4.1.562.2.4.1.12.5.3.10.1.2	OCTET STRING	read-only	This indicates whether or not the DS3 component is currently looping back the incoming DS3 signal or one of its DS1 tributaries to the far-end DS3 terminal. This is activated when the far-end DS3 equipment has ordered the local terminal to do so. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) notused29(29) notused30(30) ds3Line(31)
lpDS3CBitOperationalEntry	1.3.6.1.4.1.562.2.4.1.12.5.3.10.1		not-accessible	An entry in the lpDS3CBitOperationalTable.
lpDS3CBitOperationalTable	1.3.6.1.4.1.562.2.4.1.12.5.3.10		not-accessible	This group contains the DS3 C-Bit Parity operational data for the CBIT component.
INT lpDS3CbitParity	1.3.6.1.4.1.562.2.4.1.12.5.10.1.1	INTEGER	read-write	This attribute indicates if C-Bit parity has been turned ON or OFF. The CBIT component will appear under the DS3 component when the cbitParity attribute is set to on.
ROW lpDS3CBitRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS3CBit components. These components cannot be added nor deleted.
lpDS3CBitRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.3.1.1		not-accessible	A single entry in the table represents a single lpDS3CBit component.
lpDS3CBitRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.3.1		not-accessible	This entry controls the addition and deletion of lpDS3CBit components.
lpDS3CBitStatsEntry	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1		not-accessible	An entry in the lpDS3CBitStatsTable.
lpDS3CBitStatsTable	1.3.6.1.4.1.562.2.4.1.12.5.3.11		not-accessible	This group contains the DS3 C-Bit Parity statistical data for the CBIT component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO lpDS3CBitStorageType	1.3.6.1.4.1.562.2.4.1.12.5.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3CBit tables.
lpDS3Cell	1.3.6.1.4.1.562.2.4.1.12.5.5
U32 lpDS3CellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.5.5.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
STR lpDS3CellComponentName	1.3.6.1.4.1.562.2.4.1.12.5.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 lpDS3CellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
INT lpDS3CellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.5.5.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
NON lpDS3CellIndex	1.3.6.1.4.1.562.2.4.1.12.5.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3Cell tables.
INT lpDS3CellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.5.5.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
lpDS3CellOperEntry	1.3.6.1.4.1.562.2.4.1.12.5.5.11.1		not-accessible	An entry in the lpDS3CellOperTable.
lpDS3CellOperTable	1.3.6.1.4.1.562.2.4.1.12.5.5.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpDS3CellProvEntry	1.3.6.1.4.1.562.2.4.1.12.5.5.10.1		not-accessible	An entry in the lpDS3CellProvTable.
lpDS3CellProvTable	1.3.6.1.4.1.562.2.4.1.12.5.5.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
G32 lpDS3CellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
ROW lpDS3CellRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS3Cell components. These components can be added and deleted.
lpDS3CellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.5.1.1		not-accessible	A single entry in the table represents a single lpDS3Cell component.
lpDS3CellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.5.1		not-accessible	This entry controls the addition and deletion of lpDS3Cell components.
INT lpDS3CellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.5.5.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
C32 lpDS3CellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
lpDS3CellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.5.5.12.1		not-accessible	An entry in the lpDS3CellStatsTable.
lpDS3CellStatsTable	1.3.6.1.4.1.562.2.4.1.12.5.5.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO lpDS3CellStorageType	1.3.6.1.4.1.562.2.4.1.12.5.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3Cell tables.
G32 lpDS3CellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 lpDS3CellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
lpDS3CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.5.11.1		not-accessible	An entry in the lpDS3CidDataTable.
lpDS3CidDataTable	1.3.6.1.4.1.562.2.4.1.12.5.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
INT lpDS3ClockingSource	1.3.6.1.4.1.562.2.4.1.12.5.10.1.3	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the DS3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means use of a signal phase-locked to the incoming DS3 line rate; module means the use of a signal phase-locked to the CP reference clock. Note that the multiport cell-based cards have one common clock source for all ports. For this reason, the following rules apply for the value of clockingSource across the board's three ports: All three clockingSource values must be 'local' OR All three clockingSource values must be 'module' OR One clockingSource value must be 'line' and the other two must be 'otherPort'. The there is no NS component provisioned, the default value for this attribute will be local. If the NS component has been provisioned, the default value is module, except for the 1pDS3C cards. For the 1pDS3C cards, the default and only valid value for this attribute is local. The clockingSource of the DS1 sub-component becomes the effective clocking source for this attribute. All the DS1 sub-components have the same clocking source.
STR lpDS3CommentText	1.3.6.1.4.1.562.2.4.1.12.5.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpDS3ComponentName	1.3.6.1.4.1.562.2.4.1.12.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT lpDS3ControlStatus	1.3.6.1.4.1.562.2.4.1.12.5.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 lpDS3CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.5.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
lpDS3DS1	1.3.6.1.4.1.562.2.4.1.12.5.6
lpDS3DS1AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.12.1		not-accessible	An entry in the lpDS3DS1AdminInfoTable.
lpDS3DS1AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.5.6.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT lpDS3DS1AdminState	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpDS3DS1AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT lpDS3DS1AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
lpDS3DS1Chan	1.3.6.1.4.1.562.2.4.1.12.5.6.2
G32 lpDS3DS1ChanActualChannelSpeed	1.3.6.1.4.1.562.2.4.1.12.5.6.2.15.1.1	Gauge32	read-only	This attribute displays the measured link speed of the Channel component.
lpDS3DS1ChanAdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.16.1		not-accessible	An entry in the lpDS3DS1ChanAdminInfoTable.
lpDS3DS1ChanAdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.16		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT lpDS3DS1ChanAdminState	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpDS3DS1ChanAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN lpDS3DS1ChanApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.5.6.2.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
OCT lpDS3DS1ChanAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
lpDS3DS1ChanCell	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3
U32 lpDS3DS1ChanCellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
STR lpDS3DS1ChanCellComponentName	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 lpDS3DS1ChanCellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
INT lpDS3DS1ChanCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
NON lpDS3DS1ChanCellIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3DS1ChanCell tables.
INT lpDS3DS1ChanCellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
lpDS3DS1ChanCellOperEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.11.1		not-accessible	An entry in the lpDS3DS1ChanCellOperTable.
lpDS3DS1ChanCellOperTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpDS3DS1ChanCellProvEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10.1		not-accessible	An entry in the lpDS3DS1ChanCellProvTable.
lpDS3DS1ChanCellProvTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
G32 lpDS3DS1ChanCellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
ROW lpDS3DS1ChanCellRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS3DS1ChanCell components. These components can be added and deleted.
lpDS3DS1ChanCellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1		not-accessible	A single entry in the table represents a single lpDS3DS1ChanCell component.
lpDS3DS1ChanCellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1		not-accessible	This entry controls the addition and deletion of lpDS3DS1ChanCell components.
INT lpDS3DS1ChanCellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
C32 lpDS3DS1ChanCellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
lpDS3DS1ChanCellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1		not-accessible	An entry in the lpDS3DS1ChanCellStatsTable.
lpDS3DS1ChanCellStatsTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO lpDS3DS1ChanCellStorageType	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3DS1ChanCell tables.
G32 lpDS3DS1ChanCellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 lpDS3DS1ChanCellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
lpDS3DS1ChanCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.11.1		not-accessible	An entry in the lpDS3DS1ChanCidDataTable.
lpDS3DS1ChanCidDataTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
STR lpDS3DS1ChanCommentText	1.3.6.1.4.1.562.2.4.1.12.5.6.2.16.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpDS3DS1ChanComponentName	1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT lpDS3DS1ChanControlStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 lpDS3DS1ChanCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.5.6.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
INT lpDS3DS1ChanIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
lpDS3DS1ChanIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.12.1		not-accessible	An entry in the lpDS3DS1ChanIfEntryTable.
lpDS3DS1ChanIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM lpDS3DS1ChanIfIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.2.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 lpDS3DS1ChanIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1.10	Integer32	not-accessible	This variable represents the index for the lpDS3DS1Chan tables.
INT lpDS3DS1ChanOperationalState	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
lpDS3DS1ChanOperEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.15.1		not-accessible	An entry in the lpDS3DS1ChanOperTable.
lpDS3DS1ChanOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.13.1		not-accessible	An entry in the lpDS3DS1ChanOperStatusTable.
lpDS3DS1ChanOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpDS3DS1ChanOperTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.15		not-accessible	This group contains all of the operational data for a Channel component.
OCT lpDS3DS1ChanProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
lpDS3DS1ChanProvEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.10.1		not-accessible	An entry in the lpDS3DS1ChanProvTable.
lpDS3DS1ChanProvTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.10		not-accessible	This group contains all of the provisional data for a Channel component.
ROW lpDS3DS1ChanRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS3DS1Chan components. These components can be added and deleted.
lpDS3DS1ChanRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1		not-accessible	A single entry in the table represents a single lpDS3DS1Chan component.
lpDS3DS1ChanRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.1		not-accessible	This entry controls the addition and deletion of lpDS3DS1Chan components.
INT lpDS3DS1ChanSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpDS3DS1ChanStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
lpDS3DS1ChanStateEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1		not-accessible	An entry in the lpDS3DS1ChanStateTable.
lpDS3DS1ChanStateTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
STO lpDS3DS1ChanStorageType	1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3DS1Chan tables.
lpDS3DS1ChanTc	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4
STR lpDS3DS1ChanTcComponentName	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
INT lpDS3DS1ChanTcEgressConditioning	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.11.1.2	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
NON lpDS3DS1ChanTcIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3DS1ChanTc tables.
INT lpDS3DS1ChanTcIngressConditioning	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.11.1.1	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
lpDS3DS1ChanTcOpEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.11.1		not-accessible	An entry in the lpDS3DS1ChanTcOpTable.
lpDS3DS1ChanTcOpTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.11		not-accessible	This group contains all specific operational data for a Tc component.
lpDS3DS1ChanTcProvEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.10.1		not-accessible	An entry in the lpDS3DS1ChanTcProvTable.
lpDS3DS1ChanTcProvTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.10		not-accessible	This group contains all specific provisioning data for a Tc component.
HEX lpDS3DS1ChanTcReplacementData	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.10.1.1	Hex	read-write	This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
ROW lpDS3DS1ChanTcRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS3DS1ChanTc components. These components can be added and deleted.
lpDS3DS1ChanTcRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1		not-accessible	A single entry in the table represents a single lpDS3DS1ChanTc component.
lpDS3DS1ChanTcRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1		not-accessible	This entry controls the addition and deletion of lpDS3DS1ChanTc components.
U32 lpDS3DS1ChanTcSignalOneDuration	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.10.1.2	Unsigned32	read-write	This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
lpDS3DS1ChanTcSigOneEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.398.1		not-accessible	An entry in the lpDS3DS1ChanTcSigOneTable.
INT lpDS3DS1ChanTcSigOneIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.398.1.1	INTEGER	not-accessible	This variable represents the lpDS3DS1ChanTcSigOneTable specific index for the lpDS3DS1ChanTcSigOneTable.
lpDS3DS1ChanTcSigOneTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.398		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
U32 lpDS3DS1ChanTcSigOneValue	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.398.1.2	Unsigned32	read-write	This variable represents an individual value for the lpDS3DS1ChanTcSigOneTable.
lpDS3DS1ChanTcSigTwoEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.399.1		not-accessible	An entry in the lpDS3DS1ChanTcSigTwoTable.
INT lpDS3DS1ChanTcSigTwoIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.399.1.1	INTEGER	not-accessible	This variable represents the lpDS3DS1ChanTcSigTwoTable specific index for the lpDS3DS1ChanTcSigTwoTable.
lpDS3DS1ChanTcSigTwoTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.399		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
U32 lpDS3DS1ChanTcSigTwoValue	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.399.1.2	Unsigned32	read-write	This variable represents an individual value for the lpDS3DS1ChanTcSigTwoTable.
STO lpDS3DS1ChanTcStorageType	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3DS1ChanTc tables.
lpDS3DS1ChanTest	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2
INT lpDS3DS1ChanTestAdminState	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR lpDS3DS1ChanTestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpDS3DS1ChanTestBitsRx	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpDS3DS1ChanTestBitsTx	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpDS3DS1ChanTestBytesRx	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS3DS1ChanTestBytesTx	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT lpDS3DS1ChanTestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
STR lpDS3DS1ChanTestComponentName	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX lpDS3DS1ChanTestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpDS3DS1ChanTestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpDS3DS1ChanTestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpDS3DS1ChanTestDuration	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 lpDS3DS1ChanTestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM lpDS3DS1ChanTestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
INT lpDS3DS1ChanTestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM lpDS3DS1ChanTestFrmRx	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 lpDS3DS1ChanTestFrmSize	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM lpDS3DS1ChanTestFrmTx	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON lpDS3DS1ChanTestIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3DS1ChanTest tables.
INT lpDS3DS1ChanTestOperationalState	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR lpDS3DS1ChanTestPurpose	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
lpDS3DS1ChanTestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1		not-accessible	An entry in the lpDS3DS1ChanTestResultsTable.
lpDS3DS1ChanTestResultsTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW lpDS3DS1ChanTestRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS3DS1ChanTest components. These components cannot be added nor deleted.
lpDS3DS1ChanTestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1		not-accessible	A single entry in the table represents a single lpDS3DS1ChanTest component.
lpDS3DS1ChanTestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1		not-accessible	This entry controls the addition and deletion of lpDS3DS1ChanTest components.
lpDS3DS1ChanTestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1		not-accessible	An entry in the lpDS3DS1ChanTestSetupTable.
lpDS3DS1ChanTestSetupTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpDS3DS1ChanTestStateEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10.1		not-accessible	An entry in the lpDS3DS1ChanTestStateTable.
lpDS3DS1ChanTestStateTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO lpDS3DS1ChanTestStorageType	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3DS1ChanTest tables.
U32 lpDS3DS1ChanTestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpDS3DS1ChanTestType	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpDS3DS1ChanTestUsageState	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpDS3DS1ChanTimeslotDataRate	1.3.6.1.4.1.562.2.4.1.12.5.6.2.10.1.2	INTEGER	read-write	This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependent on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56kbit/s is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
OCT lpDS3DS1ChanTimeslots	1.3.6.1.4.1.562.2.4.1.12.5.6.2.10.1.1	OCTET STRING	read-write	This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
INT lpDS3DS1ChanUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpDS3DS1ChanUsageState	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR lpDS3DS1ChanVendor	1.3.6.1.4.1.562.2.4.1.12.5.6.2.16.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
lpDS3DS1CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.11.1		not-accessible	An entry in the lpDS3DS1CidDataTable.
lpDS3DS1CidDataTable	1.3.6.1.4.1.562.2.4.1.12.5.6.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
INT lpDS3DS1ClockingSource	1.3.6.1.4.1.562.2.4.1.12.5.6.10.1.3	INTEGER	read-write	This attribute defines the source of the transmit clock for the DS1 tributary. When the clocking source is selected from local, the crystal on the port generates the clocking for the DS1 tributary. When the clocking source is selected from line, the port synchronizes to the clock from the DS1 tributary. When the clocking source is selected from module, the ports clock synchronizes to the clock provided by the oscillator on the active CP. On a 1pDS3C card, if the NetworkSynchronization (NS) component is present the default value of this attribute will be module otherwise it will be line. On a 2pDS3cAal card, the only valid values are local and module. If the NS component is present the default value of this attribute will be module otherwise it will be local.
STR lpDS3DS1CommentText	1.3.6.1.4.1.562.2.4.1.12.5.6.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpDS3DS1ComponentName	1.3.6.1.4.1.562.2.4.1.12.5.6.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT lpDS3DS1ControlStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
C32 lpDS3DS1CrcErrors	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.7	Counter32	read-only	This attribute counts the total number of CRC-6 errors. These will only be counted when the lineType is esf.
U32 lpDS3DS1CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.5.6.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
C32 lpDS3DS1ErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.3	Counter32	read-only	This attribute counts the number of errored seconds the tributary has counted since it was activated. An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
C32 lpDS3DS1ErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.2	Counter32	read-only	This attribute counts the number of seconds that the tributary has been in an error free state.
C32 lpDS3DS1FrmErrors	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.8	Counter32	read-only	This attribute counts the total number of frame errors. A frame error is an error in the framing bits.
INT lpDS3DS1IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
lpDS3DS1IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.13.1		not-accessible	An entry in the lpDS3DS1IfEntryTable.
lpDS3DS1IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.5.6.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM lpDS3DS1IfIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 lpDS3DS1Index	1.3.6.1.4.1.562.2.4.1.12.5.6.1.1.10	Integer32	not-accessible	This variable represents the index for the lpDS3DS1 tables.
INT lpDS3DS1LineType	1.3.6.1.4.1.562.2.4.1.12.5.6.10.1.1	INTEGER	read-write	This attribute defines the framing of the DS1 tributary. d4 defines a framing pattern of 12 frames per multiframe. esf defines a framing pattern of 24 frames per multiframe. d4Cas defines a framing pattern of 12 frames per multiframe with channel associated signalling. esfCas defines a framing pattern of 24 frames per multiframe with channel associated signalling.
INT lpDS3DS1LofAlarm	1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.2	INTEGER	read-only	This attribute indicates whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (2 out of 5 framing bits in error ) have been detected for 3 seconds +/- 0.5 seconds. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. This tributary goes into an operationalState of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
INT lpDS3DS1OperationalState	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
lpDS3DS1OperEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.16.1		not-accessible	An entry in the lpDS3DS1OperTable.
lpDS3DS1OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.14.1		not-accessible	An entry in the lpDS3DS1OperStatusTable.
lpDS3DS1OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpDS3DS1OperTable	1.3.6.1.4.1.562.2.4.1.12.5.6.16		not-accessible	This group contains the common operational data for a component in a digital hierarchy interface.
OCT lpDS3DS1ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
lpDS3DS1ProvEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.10.1		not-accessible	An entry in the lpDS3DS1ProvTable.
lpDS3DS1ProvTable	1.3.6.1.4.1.562.2.4.1.12.5.6.10		not-accessible	This group contains all of the provisioning data for a DS1 component.
ROW lpDS3DS1RowStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS3DS1 components. These components can be added and deleted.
lpDS3DS1RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.1.1		not-accessible	A single entry in the table represents a single lpDS3DS1 component.
lpDS3DS1RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.1		not-accessible	This entry controls the addition and deletion of lpDS3DS1 components.
C32 lpDS3DS1RunningTime	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.1	Counter32	read-only	This attribute counts the number of seconds since the tributary was activated.
INT lpDS3DS1RxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.1	INTEGER	read-only	This attribute indicates whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/- 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period. If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. This tributary goes into an operationalState of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
INT lpDS3DS1RxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.3	INTEGER	read-only	This attribute indicates whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/ 10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds. The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
C32 lpDS3DS1SevErroredFrmSec	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.5	Counter32	read-only	This attribute counts the number of severely errored framing seconds the tributary has counted since it was activated A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
C32 lpDS3DS1SevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.4	Counter32	read-only	This attribute counts the number of severely errored seconds the tributary has counted since it was activated. A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
C32 lpDS3DS1SlipErrors	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.9	Counter32	read-only	The total number of times that the line experienced a controlled frame slip.
INT lpDS3DS1SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpDS3DS1StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
lpDS3DS1StateEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1		not-accessible	An entry in the lpDS3DS1StateTable.
lpDS3DS1StateTable	1.3.6.1.4.1.562.2.4.1.12.5.6.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpDS3DS1StatsEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1		not-accessible	An entry in the lpDS3DS1StatsTable.
lpDS3DS1StatsTable	1.3.6.1.4.1.562.2.4.1.12.5.6.17		not-accessible	This group contains the common statistical data for a component in a digital hierarchy interface.
STO lpDS3DS1StorageType	1.3.6.1.4.1.562.2.4.1.12.5.6.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3DS1 tables.
lpDS3DS1Test	1.3.6.1.4.1.562.2.4.1.12.5.6.3
INT lpDS3DS1TestAdminState	1.3.6.1.4.1.562.2.4.1.12.5.6.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR lpDS3DS1TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpDS3DS1TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpDS3DS1TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpDS3DS1TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS3DS1TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT lpDS3DS1TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
STR lpDS3DS1TestComponentName	1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX lpDS3DS1TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpDS3DS1TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpDS3DS1TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpDS3DS1TestDuration	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 lpDS3DS1TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM lpDS3DS1TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
INT lpDS3DS1TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM lpDS3DS1TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 lpDS3DS1TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM lpDS3DS1TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON lpDS3DS1TestIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3DS1Test tables.
INT lpDS3DS1TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.5.6.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR lpDS3DS1TestPurpose	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
lpDS3DS1TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1		not-accessible	An entry in the lpDS3DS1TestResultsTable.
lpDS3DS1TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW lpDS3DS1TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS3DS1Test components. These components cannot be added nor deleted.
lpDS3DS1TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1		not-accessible	A single entry in the table represents a single lpDS3DS1Test component.
lpDS3DS1TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.3.1		not-accessible	This entry controls the addition and deletion of lpDS3DS1Test components.
lpDS3DS1TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1		not-accessible	An entry in the lpDS3DS1TestSetupTable.
lpDS3DS1TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11		not-accessible	This group contains all of the operational data for a Test component.
lpDS3DS1TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.3.10.1		not-accessible	An entry in the lpDS3DS1TestStateTable.
lpDS3DS1TestStateTable	1.3.6.1.4.1.562.2.4.1.12.5.6.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO lpDS3DS1TestStorageType	1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3DS1Test tables.
U32 lpDS3DS1TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpDS3DS1TestType	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpDS3DS1TestUsageState	1.3.6.1.4.1.562.2.4.1.12.5.6.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpDS3DS1TxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.4	INTEGER	read-only	This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the tributary is in a locked state.
INT lpDS3DS1TxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.5	INTEGER	read-only	This attribute indicates whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the tributary detects a LOF alarm condition.
C32 lpDS3DS1UnavailSec	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.6	Counter32	read-only	This attribute counts the total number of seconds that the tributary has been in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
INT lpDS3DS1UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpDS3DS1UsageState	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR lpDS3DS1Vendor	1.3.6.1.4.1.562.2.4.1.12.5.6.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
INT lpDS3DS1ZeroCoding	1.3.6.1.4.1.562.2.4.1.12.5.6.10.1.2	INTEGER	read-write	This attribute defines the zero encoding on the DS1 tributary. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the available bandwidth of the channel by 1/8. none does no zero encoding.
C32 lpDS3ErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the DS3 port has been in an error free state.
INT lpDS3IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.5.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
lpDS3IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.5.13.1		not-accessible	An entry in the lpDS3IfEntryTable.
lpDS3IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.5.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM lpDS3IfIndex	1.3.6.1.4.1.562.2.4.1.12.5.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 lpDS3Index	1.3.6.1.4.1.562.2.4.1.12.5.1.1.10	Integer32	not-accessible	This variable represents the index for the lpDS3 tables.
C32 lpDS3LineCodeViolations	1.3.6.1.4.1.562.2.4.1.12.5.17.1.3	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCV) detected. A DS3 Line Code Violation is a B3Zs error. LCV counting is inhibited for second intervals where Line Severely Errored Second (LSES) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3LineErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.4	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LES) that have been counted. A LES is declared for second intervals containing one or more LCV or one or more Loss Of Signal (LOS) defects.
C32 lpDS3LineFailures	1.3.6.1.4.1.562.2.4.1.12.5.17.1.7	Counter32	read-only	This attribute indicates the total number of times that a line failure (LOS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
U32 lpDS3LineLength	1.3.6.1.4.1.562.2.4.1.12.5.10.1.2	Unsigned32	read-write	This attribute defines the line length for equalization calculations for the DS3 line. The range is between 0 and 450 feet (1 metre = 3.28 feet). Note: There are currently only two ranges as far as the equalization calculation performed on the FP is concerned: 0 to 224ft and 225 to 450ft.
C32 lpDS3LineLosSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.6	Counter32	read-only	This attribute indicates the total number of Line LOS Seconds (LOSS) that have been counted. A LOSS is declared for second intervals containing one or more LOS defects.
C32 lpDS3LineSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.5	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSES) that have been counted. A LSES is declared for second intervals containing more than 44 LCVs or one or more LOS defects.
INT lpDS3LofAlarm	1.3.6.1.4.1.562.2.4.1.12.5.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely Errored Frame (SEF) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. A SEF defect is detected when 3 (or more) out of 16 (or fewer) F-bits are in error, or one (or more) M-bits in two (or more) out of four (or fewer) consecutive M-frames are in error. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. As long as SEF defects are detected, the node also transmits the far-end SEF/AIS defect indicator over the outgoing line. When not running in C-Bit Parity mode, the txRai attribute is also set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT lpDS3LosAlarm	1.3.6.1.4.1.562.2.4.1.12.5.16.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is detected at the DS3 line interface upon observing 175 +/- 75 continuous pulse positions with no pulses of either positive or negative polarity. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT lpDS3Mapping	1.3.6.1.4.1.562.2.4.1.12.5.10.1.5	INTEGER	read-write	This attribute indicates if ATM cells will be mapped directly into the DS3 payload, or whether PLCP mapping will be used. The PLCP component will appear under the DS3 component when this attribute is set to plcp. This attribute will be ignored when set on frame-based cards.
INT lpDS3OperationalState	1.3.6.1.4.1.562.2.4.1.12.5.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
lpDS3OperEntry	1.3.6.1.4.1.562.2.4.1.12.5.16.1		not-accessible	An entry in the lpDS3OperTable.
lpDS3OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.14.1		not-accessible	An entry in the lpDS3OperStatusTable.
lpDS3OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpDS3OperTable	1.3.6.1.4.1.562.2.4.1.12.5.16		not-accessible	This group contains the common operational data for DS3 component.
C32 lpDS3PathCodeViolations	1.3.6.1.4.1.562.2.4.1.12.5.17.1.8	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a P-bit parity error, or possibly a frame error or a disagreement between P-bits or X-bits. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3PathErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.9	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of Path Errored Seconds is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 lpDS3PathFailures	1.3.6.1.4.1.562.2.4.1.12.5.17.1.13	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOF/AIS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3PathSefAisSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.11	Counter32	read-only	This attribute indicates the total number of SEF/AIS Seconds (PSASs). A PSAS is declared for second intervals containing one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSAS is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 lpDS3PathSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.10	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than 44 PCVs or one or more SEF or AIS defects. Counting of PSESs is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 lpDS3PathUnavailSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.12	Counter32	read-only	This attribute indicates the total number of one second intervals for which the DS3 path is unavailable. The DS3 path becomes unavailable at the onset of 10 consecutive Path Severely Errored Seconds (PSES). The 10 PSESs are included in the unavailable time. Once unavailable, the DS3 path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where PUAS is counted, counting of Path Coding Violations (PCV), Path Errored Seconds (PES), Path Severely Errored Seconds (PSES) and Path Sef/Ais Seconds (PSAS) is inhibited.
lpDS3Plcp	1.3.6.1.4.1.562.2.4.1.12.5.4
C32 lpDS3PlcpCodingViolations	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.2	Counter32	read-only	This attribute indicates the total number of BIP-8 Errors, framing pattern octet errors, and path overhead identification errors detected in received PLCP frames. Counting of PLCP CV is inhibited for second intervals where PLCP Severely Errored Framing Seconds (SEFS) or PLCP Unavailable Seconds (UAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STR lpDS3PlcpComponentName	1.3.6.1.4.1.562.2.4.1.12.5.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 lpDS3PlcpErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.3	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Coding Violations (CV) or in which a PLCP Severely Errored Framing Second (SEFS) was counted. Counting of PLCP ES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 lpDS3PlcpErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.1	Counter32	read-only	This attribute indicates the number of seconds during which the near-end PLCP path layer had no errors.
C32 lpDS3PlcpFarEndCodingViolations	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.8	Counter32	read-only	This attribute indicates the total number of PLCP Far-End Block Errors (FEBE) reported by the far-end terminal. Counting of FEBEs is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3PlcpFarEndErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.9	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FEES is inhibited during second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 lpDS3PlcpFarEndErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.7	Counter32	read-only	This attribute indicates the number of seconds during which the far- end PLCP path layer had no errors.
C32 lpDS3PlcpFarEndSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.10	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FESES is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 lpDS3PlcpFarEndUnavailableSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.11	Counter32	read-only	This attribute indicates the number of seconds during which the PLCP far end is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP RAI (Remote Alarm Indication). Service becomes available again after this condition is cleared. For second intervals where PLCP FEUAS are counted, counting of PLCP Far-End Coding Violations (FECV), PLCP Far- End Errored Seconds (FEES), and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
NON lpDS3PlcpIndex	1.3.6.1.4.1.562.2.4.1.12.5.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3Plcp tables.
INT lpDS3PlcpLofAlarm	1.3.6.1.4.1.562.2.4.1.12.5.4.10.1.1	INTEGER	read-only	This attribute displays whether a PLCP Loss Of Frame (LOF) failure alarm state has been entered. An LOF failure is declared when a PLCP LOF defect persists for 2.5 s +/- 0.5 s. An LOF defect occurs when an OOF (Out of Frame) state persists for more than 1 ms. If the OOF events are intermittent, the LOF defect counter is decremented at a rate of 1/12 (for DS3 PLCP) or 1/9 (for G.751 E3 PLCP) of the incrementing rate, with all measurements based on a 200 ms polling cycle. An OOF event (also known as a PLCP SEF event) is declared when an error is detected in both the A1 and A2 octets, or when two consecutive POHIDs are found in error. OOF is removed when two valid sets of framing octets and two valid and sequential POHID octets have been found. The LOF defect is removed when the defect counter reaches zero, i.e. when OOF events are absent for more than 12 ms (DS3 PLCP) or 9 ms (G.751 E3 PLCP). LOF failure alarm is cleared when LOF defect is absent for 10.0 s +/- 0.5 s The DS3 or E3 component goes into an operational state of disabled until the LOF failure alarm is cleared. The terminal declaring the LOF failure alarm will transmit a PLCP RAI signal to the far-end for the duration of the alarm. The lofAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
lpDS3PlcpOperationalEntry	1.3.6.1.4.1.562.2.4.1.12.5.4.10.1		not-accessible	An entry in the lpDS3PlcpOperationalTable.
lpDS3PlcpOperationalTable	1.3.6.1.4.1.562.2.4.1.12.5.4.10		not-accessible	This group contains the operational data for the PLCP component.
ROW lpDS3PlcpRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS3Plcp components. These components cannot be added nor deleted.
lpDS3PlcpRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.4.1.1		not-accessible	A single entry in the table represents a single lpDS3Plcp component.
lpDS3PlcpRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.4.1		not-accessible	This entry controls the addition and deletion of lpDS3Plcp components.
INT lpDS3PlcpRxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.5.4.10.1.2	INTEGER	read-only	This attribute displays whether a PLCP Remote Alarm Indication (RAI) failure alarm state has been entered. An RAI failure alarm occurs when ten consecutive PLCP RAI bits (bit 5 in the G1 byte) are high on the incoming line. An RAI failure alarm is cleared when ten consecutive RAI bits are set to 0. Note: Some standards call this alarm RFI. The rxRaiAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
C32 lpDS3PlcpSevErroredFramingSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.5	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Severely Errored Frame (SEF) events. An SEF event is equivalent to a PLCP OOF (Out of Frame) event. Counting of PLCPP SEFSs is inhibited for second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 lpDS3PlcpSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.4	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF event occurred). Counting of PLCP SES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
lpDS3PlcpStatsEntry	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1		not-accessible	An entry in the lpDS3PlcpStatsTable.
lpDS3PlcpStatsTable	1.3.6.1.4.1.562.2.4.1.12.5.4.11		not-accessible	This group contains the statistical data for the PLCP component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO lpDS3PlcpStorageType	1.3.6.1.4.1.562.2.4.1.12.5.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3Plcp tables.
C32 lpDS3PlcpUnavailSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.6	Counter32	read-only	This attribute indicates the number of seconds when the near-end PLCP layer is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP LOF (Loss of Frame) failure alarm state. The PLCP Path Layer becomes available again only after clearing this condition. For second intervals where PLCP UAS are counted, counting of PLCP Severely Errored Framing Seconds (SEFS), PLCP Coding Violations (CV), PLCP Errored Seconds (ES), PLCP Severely Errored Seconds (SES) and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
OCT lpDS3ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.5.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
lpDS3ProvEntry	1.3.6.1.4.1.562.2.4.1.12.5.10.1		not-accessible	An entry in the lpDS3ProvTable.
lpDS3ProvTable	1.3.6.1.4.1.562.2.4.1.12.5.10		not-accessible	This group contains all of the provisioning data for a DS3 component.
ROW lpDS3RowStatus	1.3.6.1.4.1.562.2.4.1.12.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS3 components. These components can be added and deleted.
lpDS3RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.1.1		not-accessible	A single entry in the table represents a single lpDS3 component.
lpDS3RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.1		not-accessible	This entry controls the addition and deletion of lpDS3 components.
C32 lpDS3RunningTime	1.3.6.1.4.1.562.2.4.1.12.5.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the DS3 component has been activated and been in unlocked state or used for operational testing. All the other error counts that follow as well as each DS3 subcomponent's error counts can be updated when this count is active.
INT lpDS3RxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.5.16.1.3	INTEGER	read-only	This attribute displays whether an Alarm Indication Signal (AIS) alarm state has been entered. An AIS alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is the occurrence of AIS (valid DS3 frame with payload containing the 1010...sequence and with C-Bits set to zero) in contiguous M-frames for a time greater than 100 milliseconds. If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the AIS alarm condition is cleared (after AIS has been no longer detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS is detected, the node also transmits the far-end SEF/AIS defect indicator over the outgoing line. When not running in C-Bit Parity mode, the txRai attribute is also set to on when transmitting the far- end SEF/AIS defect indicator on the outgoing line. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT lpDS3RxIdle	1.3.6.1.4.1.562.2.4.1.12.5.16.1.5	INTEGER	read-only	This attribute displays whether an Idle failure condition has been reported on the DS3 port. An Idle condition is reported when DS3 Idle defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The DS3 Idle defect is the occurrence of a valid DS3 frame with the information bits set to a 11001100.. sequence. If the DS3 Idle defects are intermittently occurring, the DS3 Idle defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the Idle failure condition is cleared. The failure condition is cleared when the DS3 idle pattern has not been detected for at least 10 seconds +/- 0.5 seconds. The rxIdle attribute is always set to off when the component has been locked and left offline. The idle pattern indicates that the far-end is physically connected but not put in service. For instance, DS3 idle is transmitted on the outgoing line when the DS3 component is locked and not used for operational testing.
INT lpDS3RxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.5.16.1.4	INTEGER	read-only	This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. When not running the C-Bit Parity mode, the RAI alarm state is entered when the far-end SEF/AIS defect indicator has been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the incoming DS3 line. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the RAI alarm condition is cleared. The condition is cleared when the far-end SEF/AIS defect indicator has not been detected for 10 seconds +/- 0.5 seconds. When running the C-Bit Parity mode, the RAI alarm state is entered upon detection of a far-end alarm over the Far-End Alarm and Control (FEAC) channel. The RAI alarm state is exited as soon as no more far-end alarm is detected on the FEAC channel. The far- end alarms that can be detected on the FEAC channel and that cause the RAI alarm state to be entered are: equipment failure alarm (service affecting), LOS alarm, LOF alarm, idle and AIS alarm. The rxRaiAlarm attribute is always set to off when the component has been locked and left offline.
INT lpDS3SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.5.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpDS3StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.5.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
lpDS3StateEntry	1.3.6.1.4.1.562.2.4.1.12.5.15.1		not-accessible	An entry in the lpDS3StateTable.
lpDS3StateTable	1.3.6.1.4.1.562.2.4.1.12.5.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpDS3StatsEntry	1.3.6.1.4.1.562.2.4.1.12.5.17.1		not-accessible	An entry in the lpDS3StatsTable.
lpDS3StatsTable	1.3.6.1.4.1.562.2.4.1.12.5.17		not-accessible	This group contains the specific DS3 common operational data for a DS3 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO lpDS3StorageType	1.3.6.1.4.1.562.2.4.1.12.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3 tables.
lpDS3Test	1.3.6.1.4.1.562.2.4.1.12.5.2
INT lpDS3TestAdminState	1.3.6.1.4.1.562.2.4.1.12.5.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR lpDS3TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpDS3TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpDS3TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpDS3TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS3TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT lpDS3TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
STR lpDS3TestComponentName	1.3.6.1.4.1.562.2.4.1.12.5.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX lpDS3TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpDS3TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpDS3TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpDS3TestDuration	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 lpDS3TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM lpDS3TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
INT lpDS3TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM lpDS3TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 lpDS3TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM lpDS3TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON lpDS3TestIndex	1.3.6.1.4.1.562.2.4.1.12.5.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3Test tables.
INT lpDS3TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.5.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR lpDS3TestPurpose	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
lpDS3TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1		not-accessible	An entry in the lpDS3TestResultsTable.
lpDS3TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.5.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW lpDS3TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS3Test components. These components cannot be added nor deleted.
lpDS3TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.2.1.1		not-accessible	A single entry in the table represents a single lpDS3Test component.
lpDS3TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.2.1		not-accessible	This entry controls the addition and deletion of lpDS3Test components.
lpDS3TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1		not-accessible	An entry in the lpDS3TestSetupTable.
lpDS3TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.5.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpDS3TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.5.2.10.1		not-accessible	An entry in the lpDS3TestStateTable.
lpDS3TestStateTable	1.3.6.1.4.1.562.2.4.1.12.5.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO lpDS3TestStorageType	1.3.6.1.4.1.562.2.4.1.12.5.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3Test tables.
U32 lpDS3TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpDS3TestType	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpDS3TestUsageState	1.3.6.1.4.1.562.2.4.1.12.5.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpDS3TxAis	1.3.6.1.4.1.562.2.4.1.12.5.16.1.6	INTEGER	read-only	This attribute displays whether an Alarm Indication Signal (AIS) alarm is being transmitted on the DS3 line. Currently, AIS is never transmitted by a Passport DS3 node.
INT lpDS3TxIdle	1.3.6.1.4.1.562.2.4.1.12.5.16.1.8	INTEGER	read-only	This attribute displays whether the DS3 Idle signal is transmitted over the outgoing line. DS3 Idle is sent when the DS3 component has been locked and not used in operational testing.
INT lpDS3TxRai	1.3.6.1.4.1.562.2.4.1.12.5.16.1.7	INTEGER	read-only	When not running C-Bit Parity mode, this attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the DS3 component has been unlocked or used in operational testing. When running in C-Bit Parity mode, this attribute displays whether a far-end alarm is sent over the Far-End Alarm and Control (FEAC) channel when the DS3 component has been unlocked or used in operational testing. When the DS3 component is locked and not used in operational testing, this attribute is always set to off.
INT lpDS3UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.5.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpDS3UsageState	1.3.6.1.4.1.562.2.4.1.12.5.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR lpDS3Vendor	1.3.6.1.4.1.562.2.4.1.12.5.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
lpE1	1.3.6.1.4.1.562.2.4.1.12.8
lpE1AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.8.12.1		not-accessible	An entry in the lpE1AdminInfoTable.
lpE1AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.8.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT lpE1AdminState	1.3.6.1.4.1.562.2.4.1.12.8.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpE1AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.8.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
lpE1Audio	1.3.6.1.4.1.562.2.4.1.12.8.5
STR lpE1AudioComponentName	1.3.6.1.4.1.562.2.4.1.12.8.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
NON lpE1AudioIndex	1.3.6.1.4.1.562.2.4.1.12.8.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE1Audio tables.
ROW lpE1AudioRowStatus	1.3.6.1.4.1.562.2.4.1.12.8.5.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpE1Audio components. These components cannot be added nor deleted.
lpE1AudioRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.5.1.1		not-accessible	A single entry in the table represents a single lpE1Audio component.
lpE1AudioRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.5.1		not-accessible	This entry controls the addition and deletion of lpE1Audio components.
STO lpE1AudioStorageType	1.3.6.1.4.1.562.2.4.1.12.8.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1Audio tables.
OCT lpE1AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.8.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
C32 lpE1BpvErrors	1.3.6.1.4.1.562.2.4.1.12.8.18.1.7	Counter32	read-only	The current count of Bipolar Violations. A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line.
lpE1Chan	1.3.6.1.4.1.562.2.4.1.12.8.2
G32 lpE1ChanActualChannelSpeed	1.3.6.1.4.1.562.2.4.1.12.8.2.15.1.1	Gauge32	read-only	This attribute displays the measured link speed of the Channel component.
lpE1ChanAdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.16.1		not-accessible	An entry in the lpE1ChanAdminInfoTable.
lpE1ChanAdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.8.2.16		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT lpE1ChanAdminState	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpE1ChanAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN lpE1ChanApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.8.2.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
OCT lpE1ChanAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
lpE1ChanCell	1.3.6.1.4.1.562.2.4.1.12.8.2.3
U32 lpE1ChanCellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.8.2.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
STR lpE1ChanCellComponentName	1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 lpE1ChanCellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
INT lpE1ChanCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.8.2.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
NON lpE1ChanCellIndex	1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE1ChanCell tables.
INT lpE1ChanCellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.8.2.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
lpE1ChanCellOperEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.3.11.1		not-accessible	An entry in the lpE1ChanCellOperTable.
lpE1ChanCellOperTable	1.3.6.1.4.1.562.2.4.1.12.8.2.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpE1ChanCellProvEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.3.10.1		not-accessible	An entry in the lpE1ChanCellProvTable.
lpE1ChanCellProvTable	1.3.6.1.4.1.562.2.4.1.12.8.2.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
G32 lpE1ChanCellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
ROW lpE1ChanCellRowStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpE1ChanCell components. These components can be added and deleted.
lpE1ChanCellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1		not-accessible	A single entry in the table represents a single lpE1ChanCell component.
lpE1ChanCellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.2.3.1		not-accessible	This entry controls the addition and deletion of lpE1ChanCell components.
INT lpE1ChanCellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.8.2.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
C32 lpE1ChanCellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
lpE1ChanCellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1		not-accessible	An entry in the lpE1ChanCellStatsTable.
lpE1ChanCellStatsTable	1.3.6.1.4.1.562.2.4.1.12.8.2.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO lpE1ChanCellStorageType	1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1ChanCell tables.
G32 lpE1ChanCellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 lpE1ChanCellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
lpE1ChanCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.11.1		not-accessible	An entry in the lpE1ChanCidDataTable.
lpE1ChanCidDataTable	1.3.6.1.4.1.562.2.4.1.12.8.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
STR lpE1ChanCommentText	1.3.6.1.4.1.562.2.4.1.12.8.2.16.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpE1ChanComponentName	1.3.6.1.4.1.562.2.4.1.12.8.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT lpE1ChanControlStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 lpE1ChanCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.8.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
INT lpE1ChanIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
lpE1ChanIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.12.1		not-accessible	An entry in the lpE1ChanIfEntryTable.
lpE1ChanIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.8.2.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM lpE1ChanIfIndex	1.3.6.1.4.1.562.2.4.1.12.8.2.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 lpE1ChanIndex	1.3.6.1.4.1.562.2.4.1.12.8.2.1.1.10	Integer32	not-accessible	This variable represents the index for the lpE1Chan tables.
INT lpE1ChanOperationalState	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
lpE1ChanOperEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.15.1		not-accessible	An entry in the lpE1ChanOperTable.
lpE1ChanOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.13.1		not-accessible	An entry in the lpE1ChanOperStatusTable.
lpE1ChanOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.2.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpE1ChanOperTable	1.3.6.1.4.1.562.2.4.1.12.8.2.15		not-accessible	This group contains all of the operational data for a Channel component.
OCT lpE1ChanProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
lpE1ChanProvEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.10.1		not-accessible	An entry in the lpE1ChanProvTable.
lpE1ChanProvTable	1.3.6.1.4.1.562.2.4.1.12.8.2.10		not-accessible	This group contains all of the provisional data for a Channel component.
ROW lpE1ChanRowStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpE1Chan components. These components can be added and deleted.
lpE1ChanRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.1.1		not-accessible	A single entry in the table represents a single lpE1Chan component.
lpE1ChanRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.2.1		not-accessible	This entry controls the addition and deletion of lpE1Chan components.
INT lpE1ChanSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpE1ChanStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
lpE1ChanStateEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1		not-accessible	An entry in the lpE1ChanStateTable.
lpE1ChanStateTable	1.3.6.1.4.1.562.2.4.1.12.8.2.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
STO lpE1ChanStorageType	1.3.6.1.4.1.562.2.4.1.12.8.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1Chan tables.
lpE1ChanTc	1.3.6.1.4.1.562.2.4.1.12.8.2.4
STR lpE1ChanTcComponentName	1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
INT lpE1ChanTcEgressConditioning	1.3.6.1.4.1.562.2.4.1.12.8.2.4.11.1.2	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
NON lpE1ChanTcIndex	1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE1ChanTc tables.
INT lpE1ChanTcIngressConditioning	1.3.6.1.4.1.562.2.4.1.12.8.2.4.11.1.1	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
lpE1ChanTcOpEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.4.11.1		not-accessible	An entry in the lpE1ChanTcOpTable.
lpE1ChanTcOpTable	1.3.6.1.4.1.562.2.4.1.12.8.2.4.11		not-accessible	This group contains all specific operational data for a Tc component.
lpE1ChanTcProvEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.4.10.1		not-accessible	An entry in the lpE1ChanTcProvTable.
lpE1ChanTcProvTable	1.3.6.1.4.1.562.2.4.1.12.8.2.4.10		not-accessible	This group contains all specific provisioning data for a Tc component.
HEX lpE1ChanTcReplacementData	1.3.6.1.4.1.562.2.4.1.12.8.2.4.10.1.1	Hex	read-write	This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
ROW lpE1ChanTcRowStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpE1ChanTc components. These components can be added and deleted.
lpE1ChanTcRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1		not-accessible	A single entry in the table represents a single lpE1ChanTc component.
lpE1ChanTcRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.2.4.1		not-accessible	This entry controls the addition and deletion of lpE1ChanTc components.
U32 lpE1ChanTcSignalOneDuration	1.3.6.1.4.1.562.2.4.1.12.8.2.4.10.1.2	Unsigned32	read-write	This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
lpE1ChanTcSigOneEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.4.398.1		not-accessible	An entry in the lpE1ChanTcSigOneTable.
INT lpE1ChanTcSigOneIndex	1.3.6.1.4.1.562.2.4.1.12.8.2.4.398.1.1	INTEGER	not-accessible	This variable represents the lpE1ChanTcSigOneTable specific index for the lpE1ChanTcSigOneTable.
lpE1ChanTcSigOneTable	1.3.6.1.4.1.562.2.4.1.12.8.2.4.398		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
U32 lpE1ChanTcSigOneValue	1.3.6.1.4.1.562.2.4.1.12.8.2.4.398.1.2	Unsigned32	read-write	This variable represents an individual value for the lpE1ChanTcSigOneTable.
lpE1ChanTcSigTwoEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.4.399.1		not-accessible	An entry in the lpE1ChanTcSigTwoTable.
INT lpE1ChanTcSigTwoIndex	1.3.6.1.4.1.562.2.4.1.12.8.2.4.399.1.1	INTEGER	not-accessible	This variable represents the lpE1ChanTcSigTwoTable specific index for the lpE1ChanTcSigTwoTable.
lpE1ChanTcSigTwoTable	1.3.6.1.4.1.562.2.4.1.12.8.2.4.399		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
U32 lpE1ChanTcSigTwoValue	1.3.6.1.4.1.562.2.4.1.12.8.2.4.399.1.2	Unsigned32	read-write	This variable represents an individual value for the lpE1ChanTcSigTwoTable.
STO lpE1ChanTcStorageType	1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1ChanTc tables.
lpE1ChanTest	1.3.6.1.4.1.562.2.4.1.12.8.2.2
INT lpE1ChanTestAdminState	1.3.6.1.4.1.562.2.4.1.12.8.2.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR lpE1ChanTestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpE1ChanTestBitsRx	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpE1ChanTestBitsTx	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpE1ChanTestBytesRx	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpE1ChanTestBytesTx	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT lpE1ChanTestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
STR lpE1ChanTestComponentName	1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX lpE1ChanTestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpE1ChanTestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpE1ChanTestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpE1ChanTestDuration	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 lpE1ChanTestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM lpE1ChanTestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
INT lpE1ChanTestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM lpE1ChanTestFrmRx	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 lpE1ChanTestFrmSize	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM lpE1ChanTestFrmTx	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON lpE1ChanTestIndex	1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE1ChanTest tables.
INT lpE1ChanTestOperationalState	1.3.6.1.4.1.562.2.4.1.12.8.2.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR lpE1ChanTestPurpose	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
lpE1ChanTestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1		not-accessible	An entry in the lpE1ChanTestResultsTable.
lpE1ChanTestResultsTable	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW lpE1ChanTestRowStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpE1ChanTest components. These components cannot be added nor deleted.
lpE1ChanTestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1		not-accessible	A single entry in the table represents a single lpE1ChanTest component.
lpE1ChanTestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.2.2.1		not-accessible	This entry controls the addition and deletion of lpE1ChanTest components.
lpE1ChanTestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1		not-accessible	An entry in the lpE1ChanTestSetupTable.
lpE1ChanTestSetupTable	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpE1ChanTestStateEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.2.10.1		not-accessible	An entry in the lpE1ChanTestStateTable.
lpE1ChanTestStateTable	1.3.6.1.4.1.562.2.4.1.12.8.2.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO lpE1ChanTestStorageType	1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1ChanTest tables.
U32 lpE1ChanTestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpE1ChanTestType	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpE1ChanTestUsageState	1.3.6.1.4.1.562.2.4.1.12.8.2.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpE1ChanTimeslotDataRate	1.3.6.1.4.1.562.2.4.1.12.8.2.10.1.2	INTEGER	read-write	This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependent on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56kbit/s is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
OCT lpE1ChanTimeslots	1.3.6.1.4.1.562.2.4.1.12.8.2.10.1.1	OCTET STRING	read-write	This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
INT lpE1ChanUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpE1ChanUsageState	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR lpE1ChanVendor	1.3.6.1.4.1.562.2.4.1.12.8.2.16.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
lpE1CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.8.11.1		not-accessible	An entry in the lpE1CidDataTable.
lpE1CidDataTable	1.3.6.1.4.1.562.2.4.1.12.8.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
INT lpE1ClockingSource	1.3.6.1.4.1.562.2.4.1.12.8.10.1.2	INTEGER	read-write	This attribute defines the source of the transmit clock for the E1 line. When local is selected, the crystal on the port generates the clocking for the line. When line is selected, the port synchronizes to the clock from the facility. When module is selected, the ports clock synchronizes to the clock provided by the oscillator on the active CP. When otherPort is selected, the port synchronizes to the port with a clocking source of line. When srtsMode is selected, the port sychronization is taken from the SRTS (Synchronous Residual Time Stamp) bits within the ATM cell. If the NetworkSynchronization (NS) component is present the default value of this attribute will be module otherwise it will default to line except for the 3pE1Atm card which defaults to local. The 3pE1Atm card has one common clock source for all ports and does not support the line clock source; all three ports must have the same value, either local or module. The clockingSource values otherPort and srtsMode are only valid for the AAL1 cards. For the AAL1 cards either: all four ports' clockingSource values must be local OR all four ports' clockingSource values must be module OR one port's clockingSource value must be line and the other three must be otherPort. A port can only have srtsMode selected if the other ports are module or srtsMode.
STR lpE1CommentText	1.3.6.1.4.1.562.2.4.1.12.8.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpE1ComponentName	1.3.6.1.4.1.562.2.4.1.12.8.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT lpE1ControlStatus	1.3.6.1.4.1.562.2.4.1.12.8.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
INT lpE1Crc4Mode	1.3.6.1.4.1.562.2.4.1.12.8.10.1.3	INTEGER	read-write	This attribute defines whether the CRC-4 checking and generation on the E1 line is enabled or disabled. The default CRC-4 mode is off except for the cell-based cards which default to on as per the ATM Forum.
C32 lpE1CrcErrors	1.3.6.1.4.1.562.2.4.1.12.8.18.1.8	Counter32	read-only	If the interface is a DS1 line, it is the current count of CRC-6 errors. These will only be counted when the lineType is ESF. If the interface is an E1 line, it is the total number of CRC-4 errors. These will only be counted when crc4Mode is on.
U32 lpE1CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.8.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
lpE1Dsp	1.3.6.1.4.1.562.2.4.1.12.8.4
STR lpE1DspComponentName	1.3.6.1.4.1.562.2.4.1.12.8.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
NON lpE1DspIndex	1.3.6.1.4.1.562.2.4.1.12.8.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE1Dsp tables.
ROW lpE1DspRowStatus	1.3.6.1.4.1.562.2.4.1.12.8.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpE1Dsp components. These components cannot be added nor deleted.
lpE1DspRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.4.1.1		not-accessible	A single entry in the table represents a single lpE1Dsp component.
lpE1DspRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.4.1		not-accessible	This entry controls the addition and deletion of lpE1Dsp components.
STO lpE1DspStorageType	1.3.6.1.4.1.562.2.4.1.12.8.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1Dsp tables.
lpE1E1OperEntry	1.3.6.1.4.1.562.2.4.1.12.8.17.1		not-accessible	An entry in the lpE1E1OperTable.
lpE1E1OperTable	1.3.6.1.4.1.562.2.4.1.12.8.17		not-accessible	This group contains all of the operational data for a E1 component that are not defined in the DSCommonOp group.
C32 lpE1ErroredSec	1.3.6.1.4.1.562.2.4.1.12.8.18.1.3	Counter32	read-only	An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
C32 lpE1ErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.8.18.1.2	Counter32	read-only	The number of seconds that the port has been in an error free state.
C32 lpE1FrmErrors	1.3.6.1.4.1.562.2.4.1.12.8.18.1.9	Counter32	read-only	The current count of frame errors. A frame error is an error in the framing bits
INT lpE1IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.8.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
lpE1IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.8.13.1		not-accessible	An entry in the lpE1IfEntryTable.
lpE1IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.8.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM lpE1IfIndex	1.3.6.1.4.1.562.2.4.1.12.8.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 lpE1Index	1.3.6.1.4.1.562.2.4.1.12.8.1.1.10	Integer32	not-accessible	This variable represents the index for the lpE1 tables.
INT lpE1LineType	1.3.6.1.4.1.562.2.4.1.12.8.10.1.1	INTEGER	read-write	This attribute specifies the framing of the E1 line. When cas (channel associated signalling) is selected, timeslot 16 is reserved for multiframe signalling and only 30 timeslots are available for data. The signalling bits are not interpreted. When ccs (common channel signalling) is selected, timeslot 16 is not reserved for multiframe signalling and 31 timeslots are available for data. The signalling bits are not interpreted. When unframed is selected, a clear channel is defined whereby data from all timeslots including the framing data (in timeslot 0) and timeslot 16 are passed transparently. This value is valid only for AAL1 cards. For cell-based cards the ATM Forum specifies that timeslot 16 be reserved, leaving 30 timeslots available for data. The default value is cas except for the 8pE1Atm card, for which the default and only valid value is ccs.
INT lpE1LofAlarm	1.3.6.1.4.1.562.2.4.1.12.8.16.1.3	INTEGER	read-only	This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (for DS1: 2 out of 5 framing bits in error; for E1: 3 consecutive frame alignment patterns in error) have been detected for 3 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
INT lpE1LosAlarm	1.3.6.1.4.1.562.2.4.1.12.8.16.1.1	INTEGER	read-only	This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulated for a period of 2 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). A LOS defect is detected upon observing all zeros for 150 ms (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: upon observing 175 +/- 75 pulse positions with no pulses of either positive or negative polarity). If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOS alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOS alarm state. The LOS alarm state is cleared when LOS defects are absent for 10 seconds +/- 0.5 seconds.
C32 lpE1LosStateChanges	1.3.6.1.4.1.562.2.4.1.12.8.18.1.10	Counter32	read-only	The total number of times that the line lost signal.
INT lpE1MultifrmLofAlarm	1.3.6.1.4.1.562.2.4.1.12.8.17.1.1	INTEGER	read-only	This attribute indicates whether a multiframe LOF (loss of frame) alarm state is entered. A multiframe LOF alarm state is entered when a multiframe LOF defect (2 consecutive errors in the multiframe alignment signal) has been detected and accumulated for 2.5 seconds +/- 0.5 seconds. If the multiframe LOF defects are intermittently occurring, the multiframe LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The alarm is cleared when the defect is not detected for 10 seconds +/- 0.5 seconds. When the multiframe LOF alarm is on, a multiframe RAI alarm indicator is transmitted on the line. The 8pE1Atm card does not support the multiframe LOF alarm.
INT lpE1OperationalState	1.3.6.1.4.1.562.2.4.1.12.8.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
lpE1OperEntry	1.3.6.1.4.1.562.2.4.1.12.8.16.1		not-accessible	An entry in the lpE1OperTable.
lpE1OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.14.1		not-accessible	An entry in the lpE1OperStatusTable.
lpE1OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpE1OperTable	1.3.6.1.4.1.562.2.4.1.12.8.16		not-accessible	This group contains the common operational data for a component in a digital hierarchy interface.
OCT lpE1ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.8.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
lpE1ProvEntry	1.3.6.1.4.1.562.2.4.1.12.8.10.1		not-accessible	An entry in the lpE1ProvTable.
lpE1ProvTable	1.3.6.1.4.1.562.2.4.1.12.8.10		not-accessible	This group contains all of the provisioning data for an E1 component.
U32 lpE1RaiClearAlarmTime	1.3.6.1.4.1.562.2.4.1.12.8.10.1.6	Unsigned32	read-write	This attribute specifies the period of time that a Remote Alarm Indicator (RAI) has been absent before clearing an RAI alarm. The value of auto sets the RAI clear time to the default value for E1 and E1C card types which do not have hardware support for RAI response. On E1C card types with hardware support, if the value of auto is set, RAI response is done according to the standards. If auto is set, the value of the raiDeclareAlarmTime attribute is ignored and auto is used. This attribute is for E1 and E1C card types only. For all other card types, the default value must be used. VALUES ( 0 = auto )
U32 lpE1RaiDeclareAlarmTime	1.3.6.1.4.1.562.2.4.1.12.8.10.1.5	Unsigned32	read-write	This attribute specifies the period of time that a Remote Alarm Indicator (RAI) must be present before declaring an RAI alarm. The value of auto sets the RAI declare time to the default value for E1 and E1C card types which do not have hardware support for RAI response. On E1C card types with hardware support, if the value of auto is set, RAI response is done according to the standards. If auto is set, the value of the raiClearAlarmTime attribute is ignored and auto is used. This attribute is for E1 and E1C card types only. For all other card types, the default value must be used. VALUES ( 0 = auto )
ROW lpE1RowStatus	1.3.6.1.4.1.562.2.4.1.12.8.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpE1 components. These components can be added and deleted.
lpE1RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.1.1		not-accessible	A single entry in the table represents a single lpE1 component.
lpE1RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.1		not-accessible	This entry controls the addition and deletion of lpE1 components.
C32 lpE1RunningTime	1.3.6.1.4.1.562.2.4.1.12.8.18.1.1	Counter32	read-only	The number of seconds since the port component was activated.
INT lpE1RxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.8.16.1.2	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both an Out Of Frame condition exists and a 1's density of at least 99.9% is present for a time T, where 3 ms T 75 ms; for 8pE1Atm cards: when both an Out Of Frame condition exists and fewer than three 0's have been received in 512 bit periods). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
INT lpE1RxMultifrmRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.8.17.1.2	INTEGER	read-only	This attribute displays whether a multiframe RAI (remote alarm indicator) alarm state has been entered. A multiframe RAI alarm state is entered when a multiframe RAI alarm indicator (bit 6 of timeslot 16 in frame 0 is set to a one) is observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the multiframe RAI indicator is intermittently received, the multiframe RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The multiframe RAI alarm condition is cleared when the multiframe RAI alarm indication is not received for 10 seconds +/- 0.5 seconds. The multiframe RAI alarm is usually an indication that the far end facility is unable to gain multiframe synchronization. The 8pE1Atm card does not support the multiframe RAI alarm.
INT lpE1RxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.8.16.1.4	INTEGER	read-only	This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards: alarm is declared immediately upon observing the defect is present, with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm state is entered when the RAI defect indicator has been observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and 8pDS1Atm cards: alarm is cleared immediately upon observing the defect is absent, with no integration time). The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
INT lpE1SendRaiOnAis	1.3.6.1.4.1.562.2.4.1.12.8.10.1.4	INTEGER	read-write	This attribute defines whether the Remote Alarm Indicator (RAI) will be sent when receiving an AIS alarm. The value is yes by default; it can be changed to no only for ports on J2MV cards.
C32 lpE1SevErroredFrmSec	1.3.6.1.4.1.562.2.4.1.12.8.18.1.5	Counter32	read-only	A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
C32 lpE1SevErroredSec	1.3.6.1.4.1.562.2.4.1.12.8.18.1.4	Counter32	read-only	A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
C32 lpE1SlipErrors	1.3.6.1.4.1.562.2.4.1.12.8.18.1.11	Counter32	read-only	The total number of times that the line experienced a controlled frame slip. This attribute is incremented for ports on the voice cards (for example the 1pDS1V and the 1pE1V function processors) only.
INT lpE1SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.8.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpE1StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.8.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
lpE1StateEntry	1.3.6.1.4.1.562.2.4.1.12.8.15.1		not-accessible	An entry in the lpE1StateTable.
lpE1StateTable	1.3.6.1.4.1.562.2.4.1.12.8.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpE1StatsEntry	1.3.6.1.4.1.562.2.4.1.12.8.18.1		not-accessible	An entry in the lpE1StatsTable.
lpE1StatsTable	1.3.6.1.4.1.562.2.4.1.12.8.18		not-accessible	This group contains the common statistical data for a component in a digital hierarchy interface.
STO lpE1StorageType	1.3.6.1.4.1.562.2.4.1.12.8.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1 tables.
lpE1Test	1.3.6.1.4.1.562.2.4.1.12.8.3
INT lpE1TestAdminState	1.3.6.1.4.1.562.2.4.1.12.8.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR lpE1TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpE1TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpE1TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpE1TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpE1TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT lpE1TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
STR lpE1TestComponentName	1.3.6.1.4.1.562.2.4.1.12.8.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX lpE1TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpE1TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpE1TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpE1TestDuration	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 lpE1TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM lpE1TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
INT lpE1TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM lpE1TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 lpE1TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM lpE1TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON lpE1TestIndex	1.3.6.1.4.1.562.2.4.1.12.8.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE1Test tables.
INT lpE1TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.8.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR lpE1TestPurpose	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
lpE1TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1		not-accessible	An entry in the lpE1TestResultsTable.
lpE1TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.8.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW lpE1TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.8.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpE1Test components. These components cannot be added nor deleted.
lpE1TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.3.1.1		not-accessible	A single entry in the table represents a single lpE1Test component.
lpE1TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.3.1		not-accessible	This entry controls the addition and deletion of lpE1Test components.
lpE1TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1		not-accessible	An entry in the lpE1TestSetupTable.
lpE1TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.8.3.11		not-accessible	This group contains all of the operational data for a Test component.
lpE1TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.8.3.10.1		not-accessible	An entry in the lpE1TestStateTable.
lpE1TestStateTable	1.3.6.1.4.1.562.2.4.1.12.8.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO lpE1TestStorageType	1.3.6.1.4.1.562.2.4.1.12.8.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1Test tables.
U32 lpE1TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpE1TestType	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpE1TestUsageState	1.3.6.1.4.1.562.2.4.1.12.8.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpE1TxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.8.16.1.5	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the port is in a locked state.
INT lpE1TxMultifrmRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.8.17.1.3	INTEGER	read-only	This attribute displays whether a multiframe RAI (remote alarm indicator) alarm is being sent on the E1 line. This is transmitted when the E1 port detects a multiframe LOF condition. The 8pE1Atm card does not generate the multiframe RAI alarm.
INT lpE1TxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.8.16.1.6	INTEGER	read-only	This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port detects a LOF alarm condition (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: RAI is transmitted when the port detects a LOS, LOF, or AIS condition).
C32 lpE1UnavailSec	1.3.6.1.4.1.562.2.4.1.12.8.18.1.6	Counter32	read-only	The total number of seconds that the interface is in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
INT lpE1UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.8.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpE1UsageState	1.3.6.1.4.1.562.2.4.1.12.8.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR lpE1Vendor	1.3.6.1.4.1.562.2.4.1.12.8.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
lpE3	1.3.6.1.4.1.562.2.4.1.12.6
lpE3AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.6.12.1		not-accessible	An entry in the lpE3AdminInfoTable.
lpE3AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.6.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT lpE3AdminState	1.3.6.1.4.1.562.2.4.1.12.6.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpE3AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.6.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN lpE3ApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.6.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the E3 component.
OCT lpE3AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.6.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
lpE3Cell	1.3.6.1.4.1.562.2.4.1.12.6.5
U32 lpE3CellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.6.5.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
STR lpE3CellComponentName	1.3.6.1.4.1.562.2.4.1.12.6.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 lpE3CellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
INT lpE3CellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.6.5.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
NON lpE3CellIndex	1.3.6.1.4.1.562.2.4.1.12.6.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE3Cell tables.
INT lpE3CellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.6.5.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
lpE3CellOperEntry	1.3.6.1.4.1.562.2.4.1.12.6.5.11.1		not-accessible	An entry in the lpE3CellOperTable.
lpE3CellOperTable	1.3.6.1.4.1.562.2.4.1.12.6.5.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpE3CellProvEntry	1.3.6.1.4.1.562.2.4.1.12.6.5.10.1		not-accessible	An entry in the lpE3CellProvTable.
lpE3CellProvTable	1.3.6.1.4.1.562.2.4.1.12.6.5.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
G32 lpE3CellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
ROW lpE3CellRowStatus	1.3.6.1.4.1.562.2.4.1.12.6.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpE3Cell components. These components can be added and deleted.
lpE3CellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.6.5.1.1		not-accessible	A single entry in the table represents a single lpE3Cell component.
lpE3CellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.6.5.1		not-accessible	This entry controls the addition and deletion of lpE3Cell components.
INT lpE3CellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.6.5.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
C32 lpE3CellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
lpE3CellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.6.5.12.1		not-accessible	An entry in the lpE3CellStatsTable.
lpE3CellStatsTable	1.3.6.1.4.1.562.2.4.1.12.6.5.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO lpE3CellStorageType	1.3.6.1.4.1.562.2.4.1.12.6.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE3Cell tables.
G32 lpE3CellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 lpE3CellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
lpE3CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.6.11.1		not-accessible	An entry in the lpE3CidDataTable.
lpE3CidDataTable	1.3.6.1.4.1.562.2.4.1.12.6.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
INT lpE3ClockingSource	1.3.6.1.4.1.562.2.4.1.12.6.10.1.2	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the E3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means use of a signal phase-locked to the incoming E3 line rate; module means the use of a signal phase-locked to the CP reference clock. Note that the multiport cell-based cards have one common clock source for each of the three ports. For this reason, the following rules apply for the value of clockingSource across the board's three ports: All three clockingSource values must be 'local' OR All three clockingSource values must be 'module' OR One clockingSource value must be 'line' and the other two must be 'otherPort'. The default value for this attribute will be module if a CP clock is available, and local otherwise.
STR lpE3CommentText	1.3.6.1.4.1.562.2.4.1.12.6.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpE3ComponentName	1.3.6.1.4.1.562.2.4.1.12.6.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT lpE3ControlStatus	1.3.6.1.4.1.562.2.4.1.12.6.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 lpE3CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.6.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
C32 lpE3ErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the E3 port has been in an error free state.
INT lpE3Framing	1.3.6.1.4.1.562.2.4.1.12.6.10.1.5	INTEGER	read-write	This attribute indicates if the framing mode will be in accordance with the CCITT G.751 or G.832 specification. The G832 component will appear under the E3 component when this attribute is set to g832. This attribute may only be set on cell-based card types. Note also that this attribute may only be set to g751 if the mapping attribute is set to plcp. The default value of this attribute will be g751 for frame-based cards, and g832 for cell-based cards. Note: when E3 framing is changed from g832 to g751, the G832 component must be deleted.
lpE3G832	1.3.6.1.4.1.562.2.4.1.12.6.3
STR lpE3G832ComponentName	1.3.6.1.4.1.562.2.4.1.12.6.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 lpE3G832FarEndCodeViolations	1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.2	Counter32	read-only	A count of E3 frames containing a Far-End Block Error (FEBE). A FEBE is reported over the FEBE bit each time the far-end terminal detects a BIP-8 error in a received E3 frame. For second intervals where Far End Unavailable Seconds (FEUAS) or Far End Severely Errored Seconds (FESES) are counted, counting of FECVs is inhibited. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpE3G832FarEndErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.3	Counter32	read-only	This attribute indicates the total number of Far-End Errored Seconds (FEES). A FEES is declared for second intervals containing with one or more Far-End Coding Violations (FECV) or one or more Far-End Receive Failure (FERF) defects. A FERF defect occurs when the FERF bit in the received frame is set to one. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FEESs is inhibited.
C32 lpE3G832FarEndErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.1	Counter32	read-only	This attribute indicates the number of seconds that the E3 line has not suffered any G832 errors.
C32 lpE3G832FarEndSefAisSec	1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.5	Counter32	read-only	This attribute indicates the total number of Far-End SEF/AIS Seconds (FESAS). A FESAS is declared for second intervals containing one or more Far-End Receive Failure (FERF) defects. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FESAS is inhibited.
C32 lpE3G832FarEndSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.4	Counter32	read-only	This attribute indicates the total number of Far-End Severely Errored Seconds (FESESs). A FESES is declared for second intervals containing more than 34 Far-End Coding Violations (FECV) or one or more Far-End Receive Failure (FERF) defects. For second intervals where a Far-End Severely Errored Seconds (FESES) is counted, counting of FECVs is inhibited. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FESESs is inhibited.
C32 lpE3G832FarEndUnavailSec	1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.6	Counter32	read-only	This attribute indicates the total number of one second intervals for which the E3 far-end path is unavailable. The E3 far-end path becomes unavailable at the onset of 10 consecutive Far End Severely Errored Seconds (FESES). It comes available at the onset of 10 contiguous seconds with no FESES. The unavailable time includes the initial 10 seconds to enter the unavailable state but not the 10 seconds to exit the state For second intervals where FEUAS is counted, counting of Far End Coding Violations (FECV), Far- End Errored Seconds (FEES), Far-End Severely Errored Seconds (FESES) and Far-End SefAis Seconds (FESAS) are inhibited.
NON lpE3G832Index	1.3.6.1.4.1.562.2.4.1.12.6.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE3G832 tables.
lpE3G832OperationalEntry	1.3.6.1.4.1.562.2.4.1.12.6.3.11.1		not-accessible	An entry in the lpE3G832OperationalTable.
lpE3G832OperationalTable	1.3.6.1.4.1.562.2.4.1.12.6.3.11		not-accessible	This group contains the operational data for the G832 component.
lpE3G832ProvisionedEntry	1.3.6.1.4.1.562.2.4.1.12.6.3.10.1		not-accessible	An entry in the lpE3G832ProvisionedTable.
lpE3G832ProvisionedTable	1.3.6.1.4.1.562.2.4.1.12.6.3.10		not-accessible	This group contains the provisionable data for the G832 component.
ROW lpE3G832RowStatus	1.3.6.1.4.1.562.2.4.1.12.6.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpE3G832 components. These components can be added and deleted.
lpE3G832RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.6.3.1.1		not-accessible	A single entry in the table represents a single lpE3G832 component.
lpE3G832RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.6.3.1		not-accessible	This entry controls the addition and deletion of lpE3G832 components.
lpE3G832StatsEntry	1.3.6.1.4.1.562.2.4.1.12.6.3.12.1		not-accessible	An entry in the lpE3G832StatsTable.
lpE3G832StatsTable	1.3.6.1.4.1.562.2.4.1.12.6.3.12		not-accessible	This group contains the statistical data for the G832 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO lpE3G832StorageType	1.3.6.1.4.1.562.2.4.1.12.6.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE3G832 tables.
INT lpE3G832TimingMarker	1.3.6.1.4.1.562.2.4.1.12.6.3.11.1.3	INTEGER	read-only	Indicates whether or not the timing source at the far-end node is traceable to a Primary Reference Clock. The timingMarker indication is controlled by the timing marker bit in the G832 MA byte. If the received timing marker bit is 1 for five consecutive frames, and five consecutive 0s are not received for two seconds, the timingMarker indication will be set to not traceable. If the received timing marker bit is 0 for five consecutive frames and five consecutive 1s are not received for two seconds, the timingMarker indication will be set to traceable.
STR lpE3G832TrailTraceExpected	1.3.6.1.4.1.562.2.4.1.12.6.3.10.1.2	AsciiString	read-write	This attribute indicates the E.164 address which is expected in the trail access point identifier, which is transmitted using the Trail Trace (TR) field of the transmitted E3 Frame. Both the expected trail access point identifier and the transmitted trail access point identifier are provisionable attributes of the G832 component. The 16 byte Trail Trace frame is composed of one byte containing a frame start marker and a CRC-7 calculation over the previous frame, and 15 bytes for transporting an E.164 address. If less than the full 15 bytes are used, the address is padded with NULL characters.
INT lpE3G832TrailTraceMismatch	1.3.6.1.4.1.562.2.4.1.12.6.3.11.1.2	INTEGER	read-only	This attribute displays whether the Trail Trace Mismatch (TTM) alarm state has been entered. The TTM alarm state is entered when TTM defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The TTM defect is reported when the trail access point identifier contained in the Trail Trace (TR) field in the received frame fails to agree with the expected identifier. If the TTM defects are intermittently occurring, the TTM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The TTM alarm is cleared when the trail access point identifier in the received frame agrees with the expected identifier for a period of 10 seconds +/- 0.5 seconds. The trailTraceMismatch attribute is always set to off when the E3 component has been locked and left offline. Both the expected trail access identifier and the transmitted trail access identifier are provisionable attributes of the G832 component.
STR lpE3G832TrailTraceReceived	1.3.6.1.4.1.562.2.4.1.12.6.3.11.1.4	AsciiString	read-only	This attribute indicates the 15 byte E.164 address which is currently being received in the trail trace (TR) field of the E3 G832 frame. If this attribute differs from the provisioned trailTraceTransmitted string a trail trace mismatch (TTM) defect is reported, possibly resulting in a TTM alarm, as described for operational attribute trailTraceMismatch.
STR lpE3G832TrailTraceTransmitted	1.3.6.1.4.1.562.2.4.1.12.6.3.10.1.1	AsciiString	read-write	This attribute indicates the E.164 address which is to be encoded in the trail access point identifier, which is transmitted using the Trail Trace (TR) field of the transmitted E3 Frame. Both the expected trail access point identifier and the transmitted trail access point identifier are provisionable attributes of the G832 component. The 16 byte Trail Trace frame is composed of one byte containing a frame start marker and a CRC-7 calculation over the previous frame, and 15 bytes for transporting an E.164 address. If less than the full 15 bytes are used, the address is padded with NULL characters.
INT lpE3G832UnexpectedPayloadType	1.3.6.1.4.1.562.2.4.1.12.6.3.11.1.1	INTEGER	read-only	This attribute displays whether the Unexpected Payload Type (UPT) alarm state has been entered. The UPT alarm state is entered when UPT defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The UPT defect is reported when a received frame fails to agree with the expected Payload Type. If the UPT defects are intermittently occurring, the UPT defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle.. The UPT alarm is cleared when the Payload Type in the received frame agrees with the expected Payload Type for a period of 10 seconds +/- 0.5 seconds. The unexpectedPayloadType attribute is always set to off when the E3 component has been locked and left offline.
INT lpE3IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.6.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
lpE3IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.6.13.1		not-accessible	An entry in the lpE3IfEntryTable.
lpE3IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.6.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM lpE3IfIndex	1.3.6.1.4.1.562.2.4.1.12.6.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 lpE3Index	1.3.6.1.4.1.562.2.4.1.12.6.1.1.10	Integer32	not-accessible	This variable represents the index for the lpE3 tables.
C32 lpE3LineCodeViolations	1.3.6.1.4.1.562.2.4.1.12.6.17.1.3	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCV) detected. An E3 Line Code Violation is an HDB3 coded signal error. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpE3LineErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.4	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LES) that have been counted. A LES is declared for interval seconds containing one or more Line Code Violations (LCV) or one or more Loss Of Signal (LOS) defects.
C32 lpE3LineFailures	1.3.6.1.4.1.562.2.4.1.12.6.17.1.7	Counter32	read-only	This attribute indicates the total number of times that a line failure (LOS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
U32 lpE3LineLength	1.3.6.1.4.1.562.2.4.1.12.6.10.1.1	Unsigned32	read-write	This attribute defines the line length for equalization calculations for the E3 line. The line length range is between 0 and 300 metres (1 metres = 3.28 feet).
C32 lpE3LineLosSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.6	Counter32	read-only	This attribute indicates the total number of Line LOS Seconds (LOSS) that have been counted. A LOSS is declared for second intervals containing one or more Loss of Signal (LOS) defects.
C32 lpE3LineSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.5	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSES) that have been counted. A LSES is declared for second intervals containing more than 34 Line Code Violations (LCV) or one or more Loss of Signal (LOS) defects.
U32 lpE3LinkAlarmActivationThreshold	1.3.6.1.4.1.562.2.4.1.12.6.10.1.6	Unsigned32	read-write	This attribute specifies the time interval between the detection of a sustained link failure and the activation of an alarm. It is provisionable for E3 cards.
U32 lpE3LinkAlarmScanInterval	1.3.6.1.4.1.562.2.4.1.12.6.10.1.7	Unsigned32	read-write	This attribute specifies the alarm scan timer polling interval. It determines how frequently the status of the link is monitored after a first link error interrupt. It is provisionable for E3 cards.
INT lpE3LofAlarm	1.3.6.1.4.1.562.2.4.1.12.6.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely Errored Frame (SEF) defects have been detected and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An E3 SEF defect is reported after detecting Frame Alignment Signal (FAS) errors on 4 consecutive E3 frames received on the incoming line. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when E3 framing has been achieved for a period of 10 seconds +/- 0.5 seconds. As long as SEF defects are detected, the node also transmits the far-end SEF/AIS (in G.751 E3) or FERF (in G.832) defect indicator over the outgoing line. The txRai attribute is set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT lpE3LosAlarm	1.3.6.1.4.1.562.2.4.1.12.6.16.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects has been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is detected at the E3 line interface upon observing N continuous pulse positions with no pulses of either positive or negative polarity, where N is between 10 and 255. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared when the LOS defects are absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT lpE3Mapping	1.3.6.1.4.1.562.2.4.1.12.6.10.1.4	INTEGER	read-write	This attribute indicates if ATM cells will be mapped directly into the E3 payload, or whether PLCP mapping will be used. The PLCP component will appear under the E3 component when this attribute is set to plcp. This attribute will be ignored when set on frame- based cards.
INT lpE3OperationalState	1.3.6.1.4.1.562.2.4.1.12.6.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
lpE3OperEntry	1.3.6.1.4.1.562.2.4.1.12.6.16.1		not-accessible	An entry in the lpE3OperTable.
lpE3OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.6.14.1		not-accessible	An entry in the lpE3OperStatusTable.
lpE3OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.6.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpE3OperTable	1.3.6.1.4.1.562.2.4.1.12.6.16		not-accessible	This group contains the common operational data for E3 component.
C32 lpE3PathCodeViolations	1.3.6.1.4.1.562.2.4.1.12.6.17.1.8	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCV) detected. An E3 PCV is an error in the Frame Alignment (FA) signal, or, in G.832 Framing Mode, an error in the Frame Alignment signal or a BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpE3PathErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.9	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PES) that have been counted. A PES is declared for second intervals containing one or more Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of Path Errored Seconds is inhibited when a Path Unavailable Second (PUAS) is counted over the monitored second.
C32 lpE3PathFailures	1.3.6.1.4.1.562.2.4.1.12.6.17.1.13	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOF/AIS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpE3PathSefAisSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.11	Counter32	read-only	This attribute indicates the total number of Path SEF/AIS Seconds (PSAS). A PSAS is declared for second intervals containing one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSAS is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 lpE3PathSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.10	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSES) that have been counted. A PSES is declared for second intervals containing more than 22 (G.751 E3) or 34 (G.832 E3) Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSESs is inhibited when a Path Unavailable Second (PUAS) is counted over the monitored second.
C32 lpE3PathUnavailSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.12	Counter32	read-only	This attribute indicates the total number of one second intervals for which the E3 path is unavailable. The E3 path becomes unavailable at the onset of 10 consecutive Path Severely Errored Seconds (PSES). The 10 PSESs are included in the unavailable time. Once unavailable, the E3 path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where PUAS is counted, counting of Path Code Violations (PCV), Path Errored Seconds (PES), Path Severely Errored Seconds (PSES) and Path SefAis Seconds (PSAS) is inhibited.
lpE3Plcp	1.3.6.1.4.1.562.2.4.1.12.6.4
C32 lpE3PlcpCodingViolations	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.2	Counter32	read-only	This attribute indicates the total number of BIP-8 Errors, framing pattern octet errors, and path overhead identification errors detected in received PLCP frames. Counting of PLCP CV is inhibited for second intervals where PLCP Severely Errored Framing Seconds (SEFS) or PLCP Unavailable Seconds (UAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STR lpE3PlcpComponentName	1.3.6.1.4.1.562.2.4.1.12.6.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 lpE3PlcpErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.3	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Coding Violations (CV) or in which a PLCP Severely Errored Framing Second (SEFS) was counted. Counting of PLCP ES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 lpE3PlcpErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.1	Counter32	read-only	This attribute indicates the number of seconds during which the near-end PLCP path layer had no errors.
C32 lpE3PlcpFarEndCodingViolations	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.8	Counter32	read-only	This attribute indicates the total number of PLCP Far-End Block Errors (FEBE) reported by the far-end terminal. Counting of FEBEs is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpE3PlcpFarEndErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.9	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FEES is inhibited during second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 lpE3PlcpFarEndErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.7	Counter32	read-only	This attribute indicates the number of seconds during which the far- end PLCP path layer had no errors.
C32 lpE3PlcpFarEndSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.10	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FESES is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 lpE3PlcpFarEndUnavailableSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.11	Counter32	read-only	This attribute indicates the number of seconds during which the PLCP far end is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP RAI (Remote Alarm Indication). Service becomes available again after this condition is cleared. For second intervals where PLCP FEUAS are counted, counting of PLCP Far-End Coding Violations (FECV), PLCP Far- End Errored Seconds (FEES), and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
NON lpE3PlcpIndex	1.3.6.1.4.1.562.2.4.1.12.6.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE3Plcp tables.
INT lpE3PlcpLofAlarm	1.3.6.1.4.1.562.2.4.1.12.6.4.10.1.1	INTEGER	read-only	This attribute displays whether a PLCP Loss Of Frame (LOF) failure alarm state has been entered. An LOF failure is declared when a PLCP LOF defect persists for 2.5 s +/- 0.5 s. An LOF defect occurs when an OOF (Out of Frame) state persists for more than 1 ms. If the OOF events are intermittent, the LOF defect counter is decremented at a rate of 1/12 (for DS3 PLCP) or 1/9 (for G.751 E3 PLCP) of the incrementing rate, with all measurements based on a 200 ms polling cycle. An OOF event (also known as a PLCP SEF event) is declared when an error is detected in both the A1 and A2 octets, or when two consecutive POHIDs are found in error. OOF is removed when two valid sets of framing octets and two valid and sequential POHID octets have been found. The LOF defect is removed when the defect counter reaches zero, i.e. when OOF events are absent for more than 12 ms (DS3 PLCP) or 9 ms (G.751 E3 PLCP). LOF failure alarm is cleared when LOF defect is absent for 10.0 s +/- 0.5 s The DS3 or E3 component goes into an operational state of disabled until the LOF failure alarm is cleared. The terminal declaring the LOF failure alarm will transmit a PLCP RAI signal to the far-end for the duration of the alarm. The lofAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
lpE3PlcpOperationalEntry	1.3.6.1.4.1.562.2.4.1.12.6.4.10.1		not-accessible	An entry in the lpE3PlcpOperationalTable.
lpE3PlcpOperationalTable	1.3.6.1.4.1.562.2.4.1.12.6.4.10		not-accessible	This group contains the operational data for the PLCP component.
ROW lpE3PlcpRowStatus	1.3.6.1.4.1.562.2.4.1.12.6.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpE3Plcp components. These components cannot be added nor deleted.
lpE3PlcpRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.6.4.1.1		not-accessible	A single entry in the table represents a single lpE3Plcp component.
lpE3PlcpRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.6.4.1		not-accessible	This entry controls the addition and deletion of lpE3Plcp components.
INT lpE3PlcpRxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.6.4.10.1.2	INTEGER	read-only	This attribute displays whether a PLCP Remote Alarm Indication (RAI) failure alarm state has been entered. An RAI failure alarm occurs when ten consecutive PLCP RAI bits (bit 5 in the G1 byte) are high on the incoming line. An RAI failure alarm is cleared when ten consecutive RAI bits are set to 0. Note: Some standards call this alarm RFI. The rxRaiAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
C32 lpE3PlcpSevErroredFramingSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.5	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Severely Errored Frame (SEF) events. An SEF event is equivalent to a PLCP OOF (Out of Frame) event. Counting of PLCPP SEFSs is inhibited for second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 lpE3PlcpSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.4	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF event occurred). Counting of PLCP SES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
lpE3PlcpStatsEntry	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1		not-accessible	An entry in the lpE3PlcpStatsTable.
lpE3PlcpStatsTable	1.3.6.1.4.1.562.2.4.1.12.6.4.11		not-accessible	This group contains the statistical data for the PLCP component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO lpE3PlcpStorageType	1.3.6.1.4.1.562.2.4.1.12.6.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE3Plcp tables.
C32 lpE3PlcpUnavailSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.6	Counter32	read-only	This attribute indicates the number of seconds when the near-end PLCP layer is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP LOF (Loss of Frame) failure alarm state. The PLCP Path Layer becomes available again only after clearing this condition. For second intervals where PLCP UAS are counted, counting of PLCP Severely Errored Framing Seconds (SEFS), PLCP Coding Violations (CV), PLCP Errored Seconds (ES), PLCP Severely Errored Seconds (SES) and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
OCT lpE3ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.6.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
lpE3ProvEntry	1.3.6.1.4.1.562.2.4.1.12.6.10.1		not-accessible	An entry in the lpE3ProvTable.
lpE3ProvTable	1.3.6.1.4.1.562.2.4.1.12.6.10		not-accessible	This group contains all of the provisioning data for a E3 component.
ROW lpE3RowStatus	1.3.6.1.4.1.562.2.4.1.12.6.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpE3 components. These components can be added and deleted.
lpE3RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.6.1.1		not-accessible	A single entry in the table represents a single lpE3 component.
lpE3RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.6.1		not-accessible	This entry controls the addition and deletion of lpE3 components.
C32 lpE3RunningTime	1.3.6.1.4.1.562.2.4.1.12.6.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the E3 component has been activated and been in unlocked state or used for operational testing. All the other error counts that follow as well as each E3 subcomponent's error counts can be updated when this count is active.
INT lpE3RxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.6.16.1.3	INTEGER	read-only	This attribute displays whether an Alarm Indication Signal (AIS) alarm when state has been entered. An AIS alarm state is entered when AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the incoming E3 line. An AIS defect is the occurrence of the AIS (unframed signal with a density of zeros below a certain threshold such as defined by ITU Recommendation G.775). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/ 10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the AIS alarm condition is cleared (after AIS has been no longer detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS is detected on the incoming line, the node also transmits the far-end SEF/AIS (in G.751 E3) or FERF (in G.832) defect indicator over the outgoing line. The txRai attribute is set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT lpE3RxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.6.16.1.4	INTEGER	read-only	This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. A RAI alarm state is entered when far- end SEF/AIS defects (or Far-End Receive Failure (FERF) defects in G.832 E3 Framing mode) have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the E3 incoming line. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the RAI alarm condition is cleared. The condition is cleared when the far-end defect indicator has not been detected for 10 seconds +/- 0.5 seconds. The declaration of a RAI Alarm is usually a signal that the far end facility is unable to gain synchronization. The rxRaiAlarm attribute is always set to off when the component has been locked and left offline.
INT lpE3SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.6.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpE3StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.6.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
lpE3StateEntry	1.3.6.1.4.1.562.2.4.1.12.6.15.1		not-accessible	An entry in the lpE3StateTable.
lpE3StateTable	1.3.6.1.4.1.562.2.4.1.12.6.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpE3StatsEntry	1.3.6.1.4.1.562.2.4.1.12.6.17.1		not-accessible	An entry in the lpE3StatsTable.
lpE3StatsTable	1.3.6.1.4.1.562.2.4.1.12.6.17		not-accessible	This group contains the common operational data for E3 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO lpE3StorageType	1.3.6.1.4.1.562.2.4.1.12.6.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE3 tables.
lpE3Test	1.3.6.1.4.1.562.2.4.1.12.6.2
INT lpE3TestAdminState	1.3.6.1.4.1.562.2.4.1.12.6.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR lpE3TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpE3TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpE3TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpE3TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpE3TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT lpE3TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
STR lpE3TestComponentName	1.3.6.1.4.1.562.2.4.1.12.6.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX lpE3TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpE3TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpE3TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpE3TestDuration	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 lpE3TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM lpE3TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
INT lpE3TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM lpE3TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 lpE3TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM lpE3TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON lpE3TestIndex	1.3.6.1.4.1.562.2.4.1.12.6.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE3Test tables.
INT lpE3TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.6.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR lpE3TestPurpose	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
lpE3TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1		not-accessible	An entry in the lpE3TestResultsTable.
lpE3TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.6.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW lpE3TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.6.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpE3Test components. These components cannot be added nor deleted.
lpE3TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.6.2.1.1		not-accessible	A single entry in the table represents a single lpE3Test component.
lpE3TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.6.2.1		not-accessible	This entry controls the addition and deletion of lpE3Test components.
lpE3TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1		not-accessible	An entry in the lpE3TestSetupTable.
lpE3TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.6.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpE3TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.6.2.10.1		not-accessible	An entry in the lpE3TestStateTable.
lpE3TestStateTable	1.3.6.1.4.1.562.2.4.1.12.6.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO lpE3TestStorageType	1.3.6.1.4.1.562.2.4.1.12.6.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE3Test tables.
U32 lpE3TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpE3TestType	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpE3TestUsageState	1.3.6.1.4.1.562.2.4.1.12.6.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpE3TxAis	1.3.6.1.4.1.562.2.4.1.12.6.16.1.5	INTEGER	read-only	This attribute displays whether an AIS alarm is being transmitted on the E3 line. AIS is transmitted on the outgoing line when the E3 component is locked and not used for operational testing.
INT lpE3TxRai	1.3.6.1.4.1.562.2.4.1.12.6.16.1.6	INTEGER	read-only	This attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the E3 component has been unlocked or used in operational testing. When the E3 component is locked and not used in operational testing, this attribute is always set to off. The far-end SEF/AIS defect indicator is transmitted over the outgoing line when SEF/AIS defects are detected on the incoming line. In G.832 E3 Framing mode, the FERF bit is set to '1' to transmit the SEF/AIS defect indicator.
INT lpE3UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.6.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpE3UsageState	1.3.6.1.4.1.562.2.4.1.12.6.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR lpE3Vendor	1.3.6.1.4.1.562.2.4.1.12.6.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
lpEng	1.3.6.1.4.1.562.2.4.1.12.23
STR lpEngComponentName	1.3.6.1.4.1.562.2.4.1.12.23.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
lpEngDs	1.3.6.1.4.1.562.2.4.1.12.23.2
U32 lpEngDsAgentQueueSize	1.3.6.1.4.1.562.2.4.1.12.23.2.10.1.1	Unsigned32	read-only	This attribute indicates the maximum size of the DCS Agent queue size maximum for a DCS data stream on the LP. It is the maximum size to which the Agent's currentQueueSize can grow. When the queue is full and more data is offered to the Agent, it will be discarded. The following are the system defaults (in number of records): - alarm: 100 - accounting: 10000 - debug: 0 - log: 50 - scn: 200 - trap: 50 - stats: 0 To override the system defaults, see Lp Eng Ds Ov's agentQueueSize attribute.
STR lpEngDsComponentName	1.3.6.1.4.1.562.2.4.1.12.23.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
INT lpEngDsIndex	1.3.6.1.4.1.562.2.4.1.12.23.2.1.1.10	INTEGER	not-accessible	This variable represents the index for the lpEngDs tables.
lpEngDsOperEntry	1.3.6.1.4.1.562.2.4.1.12.23.2.10.1		not-accessible	An entry in the lpEngDsOperTable.
lpEngDsOperTable	1.3.6.1.4.1.562.2.4.1.12.23.2.10		not-accessible	This group contains operational attributes for the DataStream components under Lp Engineering.
lpEngDsOv	1.3.6.1.4.1.562.2.4.1.12.23.2.2
U32 lpEngDsOvAgentQueueSize	1.3.6.1.4.1.562.2.4.1.12.23.2.2.10.1.1	Unsigned32	read-write	This attribute specifies the maximum size of the DCS Agent's queue for this data stream on this LP. For more details on the defaults and other information, refer to the parent component's agentQueueSize attribute. The size should be set to 0 if absolutely no data is to be accepted from applications. There are threshold alarms based on the value of the Agent's currentQueueSize attribute (a Set when the queue becomes 75% full and a Clear after dropping back to 50% full). To properly determine what to set this to, consult the 'Magellan Passport Engineering Notes and Guidelines'.
STR lpEngDsOvComponentName	1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
NON lpEngDsOvIndex	1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpEngDsOv tables.
lpEngDsOvProvEntry	1.3.6.1.4.1.562.2.4.1.12.23.2.2.10.1		not-accessible	An entry in the lpEngDsOvProvTable.
lpEngDsOvProvTable	1.3.6.1.4.1.562.2.4.1.12.23.2.2.10		not-accessible	This group contains provisionable attributes for the DataStream Ov components under Lp Engineering. DESCRIPTION
ROW lpEngDsOvRowStatus	1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpEngDsOv components. These components can be added and deleted.
lpEngDsOvRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1		not-accessible	A single entry in the table represents a single lpEngDsOv component.
lpEngDsOvRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.23.2.2.1		not-accessible	This entry controls the addition and deletion of lpEngDsOv components.
STO lpEngDsOvStorageType	1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpEngDsOv tables.
ROW lpEngDsRowStatus	1.3.6.1.4.1.562.2.4.1.12.23.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpEngDs components. These components can be added and deleted.
lpEngDsRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.23.2.1.1		not-accessible	A single entry in the table represents a single lpEngDs component.
lpEngDsRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.23.2.1		not-accessible	This entry controls the addition and deletion of lpEngDs components.
STO lpEngDsStorageType	1.3.6.1.4.1.562.2.4.1.12.23.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpEngDs tables.
NON lpEngIndex	1.3.6.1.4.1.562.2.4.1.12.23.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpEng tables.
ROW lpEngRowStatus	1.3.6.1.4.1.562.2.4.1.12.23.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpEng components. These components cannot be added nor deleted.
lpEngRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.23.1.1		not-accessible	A single entry in the table represents a single lpEng component.
lpEngRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.23.1		not-accessible	This entry controls the addition and deletion of lpEng components.
STO lpEngStorageType	1.3.6.1.4.1.562.2.4.1.12.23.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpEng tables.
lpHssi	1.3.6.1.4.1.562.2.4.1.12.17
INT lpHssiActualLinkMode	1.3.6.1.4.1.562.2.4.1.12.17.16.1.1	INTEGER	read-only	This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The port behaves as a dce or dte according to the actualLinkMode.
G32 lpHssiActualRxLineSpeed	1.3.6.1.4.1.562.2.4.1.12.17.16.1.4	Gauge32	read-only	This attribute is the measured speed of the receive clock. Note the reported receive speed is in an error of +/- 10000 bit/s
G32 lpHssiActualTxLineSpeed	1.3.6.1.4.1.562.2.4.1.12.17.16.1.3	Gauge32	read-only	This attribute is the measured speed of the transmit clock. Note the reported transmit speed is in an error of +/- 10000 bit/s
lpHssiAdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.17.12.1		not-accessible	An entry in the lpHssiAdminInfoTable.
lpHssiAdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.17.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT lpHssiAdminState	1.3.6.1.4.1.562.2.4.1.12.17.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpHssiAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.17.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN lpHssiApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.17.10.1.7	Link	read-write	This attribute contains the component name of a Framer which is associated with the Hssi component.
OCT lpHssiAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.17.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
lpHssiCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.17.11.1		not-accessible	An entry in the lpHssiCidDataTable.
lpHssiCidDataTable	1.3.6.1.4.1.562.2.4.1.12.17.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
STR lpHssiCommentText	1.3.6.1.4.1.562.2.4.1.12.17.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpHssiComponentName	1.3.6.1.4.1.562.2.4.1.12.17.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT lpHssiControlStatus	1.3.6.1.4.1.562.2.4.1.12.17.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 lpHssiCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.17.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OCT lpHssiDataTransferLineState	1.3.6.1.4.1.562.2.4.1.12.17.10.1.3	OCTET STRING	read-write	This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both dte and dce signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the operational attribute actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: ca(0) ta(1)
C32 lpHssiDataXferStateChanges	1.3.6.1.4.1.562.2.4.1.12.17.16.1.5	Counter32	read-only	This attribute contains the number of times that the line has entered or exited the data transfer state.
INT lpHssiIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.17.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
lpHssiIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.17.13.1		not-accessible	An entry in the lpHssiIfEntryTable.
lpHssiIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.17.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM lpHssiIfIndex	1.3.6.1.4.1.562.2.4.1.12.17.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 lpHssiIndex	1.3.6.1.4.1.562.2.4.1.12.17.1.1.10	Integer32	not-accessible	This variable represents the index for the lpHssi tables.
U32 lpHssiLineSpeed	1.3.6.1.4.1.562.2.4.1.12.17.10.1.5	Unsigned32	read-write	This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. Note that the actual clock rate are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed.
OCT lpHssiLineState	1.3.6.1.4.1.562.2.4.1.12.17.16.1.2	OCTET STRING	read-only	This attribute contains the state of the interface signals. Description of bits: ca(0) ta(1) tm(2) la(3) lb(4)
INT lpHssiLinkMode	1.3.6.1.4.1.562.2.4.1.12.17.10.1.1	INTEGER	read-write	This attribute defines the intended gender of the HSSI port. The actual gender of the port is determined by the hardware setup. In dte mode, the ta line signal is driven as specified by the attribute readyLineState when the HSSI port passes its diagnostics. The ta line signal is then driven as specified by the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signal ca is compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified input line states are observed. In dce mode, the Hssi component behaves similarly as when it is in dte mode. However, it will be driving the dce line signal (ca) and monitoring the dte line signal (ta) as specified by the attributes readyLineState and dataTransferLineState.
INT lpHssiOperationalState	1.3.6.1.4.1.562.2.4.1.12.17.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
lpHssiOperEntry	1.3.6.1.4.1.562.2.4.1.12.17.16.1		not-accessible	An entry in the lpHssiOperTable.
lpHssiOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.17.14.1		not-accessible	An entry in the lpHssiOperStatusTable.
lpHssiOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.17.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpHssiOperTable	1.3.6.1.4.1.562.2.4.1.12.17.16		not-accessible	This group contains all specific operational data for a Hssi component.
OCT lpHssiProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.17.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
lpHssiProvEntry	1.3.6.1.4.1.562.2.4.1.12.17.10.1		not-accessible	An entry in the lpHssiProvTable.
lpHssiProvTable	1.3.6.1.4.1.562.2.4.1.12.17.10		not-accessible	This group contains the specific provisioning data for a Hssi component.
OCT lpHssiReadyLineState	1.3.6.1.4.1.562.2.4.1.12.17.10.1.2	OCTET STRING	read-write	This attribute specifies the line signal originating from the HSSI interface that will always be turned on, provided the HSSI interface passes it diagnostics. This set of signal is generally required for maintaining the connection. Note that both dte and dce signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the operational attribute actualLinkMode. See also linkMode. Description of bits: ca(0) ta(1)
ROW lpHssiRowStatus	1.3.6.1.4.1.562.2.4.1.12.17.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpHssi components. These components can be added and deleted.
lpHssiRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.17.1.1		not-accessible	A single entry in the table represents a single lpHssi component.
lpHssiRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.17.1		not-accessible	This entry controls the addition and deletion of lpHssi components.
INT lpHssiSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.17.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpHssiStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.17.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
lpHssiStateEntry	1.3.6.1.4.1.562.2.4.1.12.17.15.1		not-accessible	An entry in the lpHssiStateTable.
lpHssiStateTable	1.3.6.1.4.1.562.2.4.1.12.17.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
STO lpHssiStorageType	1.3.6.1.4.1.562.2.4.1.12.17.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpHssi tables.
lpHssiTest	1.3.6.1.4.1.562.2.4.1.12.17.2
INT lpHssiTestAdminState	1.3.6.1.4.1.562.2.4.1.12.17.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR lpHssiTestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpHssiTestBitsRx	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpHssiTestBitsTx	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpHssiTestBytesRx	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpHssiTestBytesTx	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT lpHssiTestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
STR lpHssiTestComponentName	1.3.6.1.4.1.562.2.4.1.12.17.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX lpHssiTestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpHssiTestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpHssiTestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpHssiTestDuration	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 lpHssiTestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM lpHssiTestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
INT lpHssiTestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM lpHssiTestFrmRx	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 lpHssiTestFrmSize	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM lpHssiTestFrmTx	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON lpHssiTestIndex	1.3.6.1.4.1.562.2.4.1.12.17.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpHssiTest tables.
INT lpHssiTestOperationalState	1.3.6.1.4.1.562.2.4.1.12.17.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR lpHssiTestPurpose	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
lpHssiTestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1		not-accessible	An entry in the lpHssiTestResultsTable.
lpHssiTestResultsTable	1.3.6.1.4.1.562.2.4.1.12.17.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW lpHssiTestRowStatus	1.3.6.1.4.1.562.2.4.1.12.17.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpHssiTest components. These components cannot be added nor deleted.
lpHssiTestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.17.2.1.1		not-accessible	A single entry in the table represents a single lpHssiTest component.
lpHssiTestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.17.2.1		not-accessible	This entry controls the addition and deletion of lpHssiTest components.
lpHssiTestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1		not-accessible	An entry in the lpHssiTestSetupTable.
lpHssiTestSetupTable	1.3.6.1.4.1.562.2.4.1.12.17.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpHssiTestStateEntry	1.3.6.1.4.1.562.2.4.1.12.17.2.10.1		not-accessible	An entry in the lpHssiTestStateTable.
lpHssiTestStateTable	1.3.6.1.4.1.562.2.4.1.12.17.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO lpHssiTestStorageType	1.3.6.1.4.1.562.2.4.1.12.17.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpHssiTest tables.
U32 lpHssiTestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpHssiTestType	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpHssiTestUsageState	1.3.6.1.4.1.562.2.4.1.12.17.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpHssiUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.17.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpHssiUsageState	1.3.6.1.4.1.562.2.4.1.12.17.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR lpHssiVendor	1.3.6.1.4.1.562.2.4.1.12.17.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
I32 lpIndex	1.3.6.1.4.1.562.2.4.1.12.1.1.10	Integer32	not-accessible	This variable represents the index for the lp tables.
lpJT2	1.3.6.1.4.1.562.2.4.1.12.16
lpJT2AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.16.17.1		not-accessible	An entry in the lpJT2AdminInfoTable.
lpJT2AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.16.17		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT lpJT2AdminState	1.3.6.1.4.1.562.2.4.1.12.16.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpJT2AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.16.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN lpJT2ApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.16.11.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the JT2 component.
OCT lpJT2AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.16.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
C32 lpJT2BpvErrors	1.3.6.1.4.1.562.2.4.1.12.16.16.1.7	Counter32	read-only	This attribute indicates the total count of bipolar violations (BPV). A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line. The value of this attribute will wrap to zero when it reaches its maximum value.
lpJT2Cell	1.3.6.1.4.1.562.2.4.1.12.16.3
U32 lpJT2CellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.16.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
STR lpJT2CellComponentName	1.3.6.1.4.1.562.2.4.1.12.16.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 lpJT2CellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
INT lpJT2CellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.16.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
NON lpJT2CellIndex	1.3.6.1.4.1.562.2.4.1.12.16.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpJT2Cell tables.
INT lpJT2CellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.16.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
lpJT2CellOperEntry	1.3.6.1.4.1.562.2.4.1.12.16.3.11.1		not-accessible	An entry in the lpJT2CellOperTable.
lpJT2CellOperTable	1.3.6.1.4.1.562.2.4.1.12.16.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpJT2CellProvEntry	1.3.6.1.4.1.562.2.4.1.12.16.3.10.1		not-accessible	An entry in the lpJT2CellProvTable.
lpJT2CellProvTable	1.3.6.1.4.1.562.2.4.1.12.16.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
G32 lpJT2CellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
ROW lpJT2CellRowStatus	1.3.6.1.4.1.562.2.4.1.12.16.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpJT2Cell components. These components cannot be added nor deleted.
lpJT2CellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.16.3.1.1		not-accessible	A single entry in the table represents a single lpJT2Cell component.
lpJT2CellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.16.3.1		not-accessible	This entry controls the addition and deletion of lpJT2Cell components.
INT lpJT2CellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.16.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
C32 lpJT2CellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
lpJT2CellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.16.3.12.1		not-accessible	An entry in the lpJT2CellStatsTable.
lpJT2CellStatsTable	1.3.6.1.4.1.562.2.4.1.12.16.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO lpJT2CellStorageType	1.3.6.1.4.1.562.2.4.1.12.16.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpJT2Cell tables.
G32 lpJT2CellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 lpJT2CellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
lpJT2CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.16.10.1		not-accessible	An entry in the lpJT2CidDataTable.
lpJT2CidDataTable	1.3.6.1.4.1.562.2.4.1.12.16.10		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
INT lpJT2ClockingSource	1.3.6.1.4.1.562.2.4.1.12.16.11.1.1	INTEGER	read-write	This attribute defines the source of the transmit clock for the JT2 line. When the clocking source is selected from local, the oscillator on the port generates the clocking for the line. When the clocking source is selected from line, the port synchronizes to the clock recovered from the incoming line signal. When the clocking source is selected from module, the port's clock synchronizes to the clock provided by the oscillator on the active CP. Note:- that when one port is set to local, the other port must also be set to local, and when one port is set to module, the other port must also be set to module. If one of the ports is set to line, the other port must be set to otherPort. Also, if a CP reference clock is available when the JT2 component is added, the clocking source defaults to module, whereas if a CP reference clock is not available when the component is added, the clocking source defaults to local.
STR lpJT2CommentText	1.3.6.1.4.1.562.2.4.1.12.16.17.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpJT2ComponentName	1.3.6.1.4.1.562.2.4.1.12.16.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT lpJT2ControlStatus	1.3.6.1.4.1.562.2.4.1.12.16.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
C32 lpJT2CrcErrors	1.3.6.1.4.1.562.2.4.1.12.16.16.1.8	Counter32	read-only	This attribute indicates the total number of cyclic redundancy check (CRC-5) errors detected on the incoming JT2 line. The value of this attribute will wrap to 0 when its maximum value is reached.
U32 lpJT2CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.16.10.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
C32 lpJT2ErroredSec	1.3.6.1.4.1.562.2.4.1.12.16.16.1.3	Counter32	read-only	This attribute indicates the total number of errored seconds for the JT2 port. An errored second is declared when a second with one or more Code Violation Error events, or one or more LOF or LOS defects occur. A code violation error may be a cyclic redundancy check (CRC) error or a bipolar violation (BPV) error.
C32 lpJT2ErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.16.16.1.2	Counter32	read-only	This attribute indicates the number of seconds that the JT2 port has been in an error free state.
C32 lpJT2FrameErrors	1.3.6.1.4.1.562.2.4.1.12.16.16.1.9	Counter32	read-only	This attribute indicates the total number of Framing Errors that have occured on the JT2 port. A Framing Error is an error in the framing bits. The value of this attribute will wrap to 0 when its maximum value is reached.
INT lpJT2IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.16.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
lpJT2IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.16.12.1		not-accessible	An entry in the lpJT2IfEntryTable.
lpJT2IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.16.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM lpJT2IfIndex	1.3.6.1.4.1.562.2.4.1.12.16.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 lpJT2Index	1.3.6.1.4.1.562.2.4.1.12.16.1.1.10	Integer32	not-accessible	This variable represents the index for the lpJT2 tables.
U32 lpJT2LineLength	1.3.6.1.4.1.562.2.4.1.12.16.11.1.2	Unsigned32	read-write	This attribute defines the line length for equalization calculations for the JT2 line. The range is between 0 and 480 feet (1 metre = 3.28 feet).
INT lpJT2LofAlarm	1.3.6.1.4.1.562.2.4.1.12.16.15.1.2	INTEGER	read-only	This attribute indicates whether a LOF (Loss of Frame) alarm state is entered. A LOF alarm state is entered when LOF defects are observed and accumulated for 2.5 seconds +/- 0.5 seconds or more. A LOF defect occurs when seven or more consecutive incorrect frame alignment patterns (4 multiframes) are received. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The LOF alarm is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled for the duration of the LOF alarm condition. While the port is in the LOF alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT lpJT2LosAlarm	1.3.6.1.4.1.562.2.4.1.12.16.15.1.1	INTEGER	read-only	This attribute displays whether a LOS (Loss of Signal) alarm state is entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is declared at the JT2 line interface when the input data is zero for 20 - 32 clock cycles. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. An LOS failure alarm is cleared when the LOS defect is absent for a period of 10 seconds +/- 0.5 seconds. The JT2 port goes into an operationalState of disabled for the duration of the LOS alarm condition. While the port is in the LOS alarm state, the port also transmits the far-end RAI defect indicator on the out-going JT2 line.
C32 lpJT2LosStateChanges	1.3.6.1.4.1.562.2.4.1.12.16.16.1.10	Counter32	read-only	This attribute indicates the total number of times that the incoming signal on the JT2 line has been lost. The value of this attribute will wrap to 0 when its maximum value is reached.
INT lpJT2OperationalState	1.3.6.1.4.1.562.2.4.1.12.16.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
lpJT2OperEntry	1.3.6.1.4.1.562.2.4.1.12.16.15.1		not-accessible	An entry in the lpJT2OperTable.
lpJT2OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.16.13.1		not-accessible	An entry in the lpJT2OperStatusTable.
lpJT2OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.16.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpJT2OperTable	1.3.6.1.4.1.562.2.4.1.12.16.15		not-accessible	This group contains the JT2 specific operational data for a JT2 component in a digital hierarchy interface.
OCT lpJT2ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.16.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
lpJT2ProvEntry	1.3.6.1.4.1.562.2.4.1.12.16.11.1		not-accessible	An entry in the lpJT2ProvTable.
lpJT2ProvTable	1.3.6.1.4.1.562.2.4.1.12.16.11		not-accessible	This group contains all of the JT2 specific provisioning data for a JT2 component.
ROW lpJT2RowStatus	1.3.6.1.4.1.562.2.4.1.12.16.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpJT2 components. These components can be added and deleted.
lpJT2RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.16.1.1		not-accessible	A single entry in the table represents a single lpJT2 component.
lpJT2RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.16.1		not-accessible	This entry controls the addition and deletion of lpJT2 components.
C32 lpJT2RunningTime	1.3.6.1.4.1.562.2.4.1.12.16.16.1.1	Counter32	read-only	This attribute indicates the number of seconds since the JT2 component was activated and placed in an unlocked state or used for operational testing. All the other error counts that follow as well as each JT2 subcomponent's error counts can be updated when this count is active.
INT lpJT2RxAisPayloadAlarm	1.3.6.1.4.1.562.2.4.1.12.16.15.1.4	INTEGER	read-only	This attribute indicates whether a Payload AIS alarm state is entered. A Payload AIS alarm state is entered when a Payload AIS defect persists for a period of 2.5 seconds +/- 0.5 seconds. A Payload AIS defect is declared when the incoming signal of the 6312 kbit/s frame payload (TS1 - TS96) has two or less zeros in a sequence of 3,072 bits (0.5 ms). If the payload AIS defects are intermittently occurring, the payload AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. A Payload AIS failure alarm is cleared when the Payload AIS defect is absent for a period of 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled until the AIS alarm condition is cleared. While the port is in the Payload AIS alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT lpJT2RxAisPhysicalAlarm	1.3.6.1.4.1.562.2.4.1.12.16.15.1.3	INTEGER	read-only	This attribute indicates whether a Physical AIS alarm state is entered. A Physical AIS alarm state is entered when a Physical AIS defect is observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. A Physical AIS defect is declared when the incoming signal has two or less zeros in a sequence of 3,156 bits (0.5 ms). If the physical AIS defects are intermittently occurring, the physical AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. A Physical AIS alarm is cleared when the Physical AIS defect is absent for a period of 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled until the AIS alarm condition is cleared. While the port is in the Physical AIS alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT lpJT2RxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.16.15.1.5	INTEGER	read-only	This attribute indicates whether a Received RAI alarm state is entered. A received RAI alarm state is entered when the RAI signal is detected on the incoming JT2 Line (when 16 or more consecutive RAI patterns of 1111111100000000 are received on the 4 kbit/s data channel (m-bits) within the framing bits of the JT2 frame). The JT2 port goes into an operationalState of Disabled until the RAI alarm condition is cleared. The RAI alarm is cleared when four or more consecutive non-RAI patterns (anything other than 1111111100000000) are received.
C32 lpJT2SevErroredFrmSec	1.3.6.1.4.1.562.2.4.1.12.16.16.1.5	Counter32	read-only	This attribute indicates the total number of severely errored framing seconds for the JT2 port. A severely errored framing second occurs when a second with one or more Framing Errors occur.
C32 lpJT2SevErroredSec	1.3.6.1.4.1.562.2.4.1.12.16.16.1.4	Counter32	read-only	This attribute indicates the total number of severely errored seconds for the JT2 port. A severely errored second occurs when a second with 255 or more Code Violation Error events or one or more LOF or LOS defects occur.
INT lpJT2SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.16.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpJT2StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.16.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
lpJT2StateEntry	1.3.6.1.4.1.562.2.4.1.12.16.14.1		not-accessible	An entry in the lpJT2StateTable.
lpJT2StateTable	1.3.6.1.4.1.562.2.4.1.12.16.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpJT2StatsEntry	1.3.6.1.4.1.562.2.4.1.12.16.16.1		not-accessible	An entry in the lpJT2StatsTable.
lpJT2StatsTable	1.3.6.1.4.1.562.2.4.1.12.16.16		not-accessible	This group contains the statistical data for a JT2 component in a digital hierarchy interface.
STO lpJT2StorageType	1.3.6.1.4.1.562.2.4.1.12.16.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpJT2 tables.
lpJT2Test	1.3.6.1.4.1.562.2.4.1.12.16.2
INT lpJT2TestAdminState	1.3.6.1.4.1.562.2.4.1.12.16.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR lpJT2TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpJT2TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpJT2TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpJT2TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpJT2TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT lpJT2TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
STR lpJT2TestComponentName	1.3.6.1.4.1.562.2.4.1.12.16.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX lpJT2TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpJT2TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpJT2TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpJT2TestDuration	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 lpJT2TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM lpJT2TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
INT lpJT2TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM lpJT2TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 lpJT2TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM lpJT2TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON lpJT2TestIndex	1.3.6.1.4.1.562.2.4.1.12.16.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpJT2Test tables.
INT lpJT2TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.16.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR lpJT2TestPurpose	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
lpJT2TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1		not-accessible	An entry in the lpJT2TestResultsTable.
lpJT2TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.16.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW lpJT2TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.16.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpJT2Test components. These components cannot be added nor deleted.
lpJT2TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.16.2.1.1		not-accessible	A single entry in the table represents a single lpJT2Test component.
lpJT2TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.16.2.1		not-accessible	This entry controls the addition and deletion of lpJT2Test components.
lpJT2TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1		not-accessible	An entry in the lpJT2TestSetupTable.
lpJT2TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.16.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpJT2TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.16.2.10.1		not-accessible	An entry in the lpJT2TestStateTable.
lpJT2TestStateTable	1.3.6.1.4.1.562.2.4.1.12.16.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO lpJT2TestStorageType	1.3.6.1.4.1.562.2.4.1.12.16.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpJT2Test tables.
U32 lpJT2TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpJT2TestType	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpJT2TestUsageState	1.3.6.1.4.1.562.2.4.1.12.16.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpJT2TxAisPhysicalAlarm	1.3.6.1.4.1.562.2.4.1.12.16.15.1.6	INTEGER	read-only	This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the outgoing JT2 line. Currently the JT2 port only transmits a Physical AIS (no Payload AIS) on the outgoing JT2 line. Since there is no Idle signal defined for JT2, the AIS signal is transmitted when the JT2 port is in the operationalState of locked. The AIS signal may also be transmitted for diagnostic testing.
INT lpJT2TxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.16.15.1.7	INTEGER	read-only	This attribute indicates whether an RAI defect indication pattern is being sent on the out-going JT2 line. The RAI alarm pattern is transmitted in the 4 kbit/s data channel (m-bits) when the port detects a LOS, AIS or LOF alarm condition.
C32 lpJT2UnavailSec	1.3.6.1.4.1.562.2.4.1.12.16.16.1.6	Counter32	read-only	This attribute indicates the total number of seconds that the interface has been in an unavailable state. An unavailable state occurs at the onset of 10 consecutive Severely Errored Seconds. When the unavailable state is entered, the 10 Severely Errored Seconds are immediately transfered to the count of unavailableSeconds by incrementing the count of unavailSec by 10 and decrementing the count of sevErroredSec by 10. Whilst in the unavailable state, an unavailableSecond is counted for each SES or SEFS that occurs, and the count of SES and SEFS are both inhibited. The unavailable state is cleared at the onset of 10 consecutive seconds which are not Severely Errored Seconds.
INT lpJT2UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.16.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpJT2UsageState	1.3.6.1.4.1.562.2.4.1.12.16.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR lpJT2Vendor	1.3.6.1.4.1.562.2.4.1.12.16.17.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
lpLinkToApplicationsEntry	1.3.6.1.4.1.562.2.4.1.12.242.1		not-accessible	An entry in the lpLinkToApplicationsTable.
lpLinkToApplicationsTable	1.3.6.1.4.1.562.2.4.1.12.242		not-accessible	This attribute allows applications to link themselves directly to the LP component.
LIN lpLinkToApplicationsValue	1.3.6.1.4.1.562.2.4.1.12.242.1.1	Link	read-only	This variable represents both the value and the index for the lpLinkToApplicationsTable.
U32 lpLocalMsgBlockCapacity	1.3.6.1.4.1.562.2.4.1.12.105.1.2	Unsigned32	read-only	This attribute indicates the processor card's local message block memory capacity (in kilobytes). These message blocks are used for local messaging on the card.
G32 lpLocalMsgBlockUsage	1.3.6.1.4.1.562.2.4.1.12.104.1.10	Gauge32	read-only	This attribute indicates the processor's current memory utilization (in kilobytes) of message blocks which are used for local messaging on the card.
G32 lpLocalMsgBlockUsageAvg	1.3.6.1.4.1.562.2.4.1.12.104.1.11	Gauge32	read-only	This attribute indicates the processor's average memory utilization (in kilobytes) of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this average memory utilization is reset to the current usage, localMsgBlockUsage.
G32 lpLocalMsgBlockUsageMax	1.3.6.1.4.1.562.2.4.1.12.104.1.13	Gauge32	read-only	This attribute indicates the processor's maximum memory utilization (in kilobytes) of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is updated at 15 second intervals. At the start of each timeInterval, this maximum memory utilization is reset to the current usage, localMsgBlockUsage.
G32 lpLocalMsgBlockUsageMin	1.3.6.1.4.1.562.2.4.1.12.104.1.12	Gauge32	read-only	This attribute indicates the processor's minimum memory utilization (in kilobytes) of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is updated at 15 second intervals. At the start of each timeInterval, this minimum memory utilization is reset to the current usage, localMsgBlockUsage.
LIN lpLogicalProcessorType	1.3.6.1.4.1.562.2.4.1.12.100.1.3	Link	read-write	This is the Logical Processor Type (LPT) that determines which software this LP will run.
LIN lpMainCard	1.3.6.1.4.1.562.2.4.1.12.100.1.1	Link	read-write	This is the preferred processor card on which this LP should be assigned.
INT lpMainCardStatus	1.3.6.1.4.1.562.2.4.1.12.103.1.2	INTEGER	read-only	This attribute specifies the status of this LP's main card. The following values have been defined: notProvisioned No main card has been provisioned notAvailable The main card is not available available The main card is available (running as standby) active The main card is running as active
lpMemoryCapacityEntry	1.3.6.1.4.1.562.2.4.1.12.244.1		not-accessible	An entry in the lpMemoryCapacityTable.
INT lpMemoryCapacityIndex	1.3.6.1.4.1.562.2.4.1.12.244.1.1	INTEGER	not-accessible	This variable represents the lpMemoryCapacityTable specific index for the lpMemoryCapacityTable.
lpMemoryCapacityTable	1.3.6.1.4.1.562.2.4.1.12.244		not-accessible	This attribute indicates the processor card's memory capacity (in kilobytes) for each type of memory.
U32 lpMemoryCapacityValue	1.3.6.1.4.1.562.2.4.1.12.244.1.2	Unsigned32	read-only	This variable represents an individual value for the lpMemoryCapacityTable.
lpMemoryUsageAvgEntry	1.3.6.1.4.1.562.2.4.1.12.276.1		not-accessible	An entry in the lpMemoryUsageAvgTable.
INT lpMemoryUsageAvgIndex	1.3.6.1.4.1.562.2.4.1.12.276.1.1	INTEGER	not-accessible	This variable represents the lpMemoryUsageAvgTable specific index for the lpMemoryUsageAvgTable.
lpMemoryUsageAvgMaxEntry	1.3.6.1.4.1.562.2.4.1.12.278.1		not-accessible	An entry in the lpMemoryUsageAvgMaxTable.
INT lpMemoryUsageAvgMaxIndex	1.3.6.1.4.1.562.2.4.1.12.278.1.1	INTEGER	not-accessible	This variable represents the lpMemoryUsageAvgMaxTable specific index for the lpMemoryUsageAvgMaxTable.
lpMemoryUsageAvgMaxTable	1.3.6.1.4.1.562.2.4.1.12.278		not-accessible	This attribute indicates the processor's maximum memory utilization (in kilobytes) for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
G32 lpMemoryUsageAvgMaxValue	1.3.6.1.4.1.562.2.4.1.12.278.1.2	Gauge32	read-only	This variable represents an individual value for the lpMemoryUsageAvgMaxTable.
lpMemoryUsageAvgMinEntry	1.3.6.1.4.1.562.2.4.1.12.277.1		not-accessible	An entry in the lpMemoryUsageAvgMinTable.
INT lpMemoryUsageAvgMinIndex	1.3.6.1.4.1.562.2.4.1.12.277.1.1	INTEGER	not-accessible	This variable represents the lpMemoryUsageAvgMinTable specific index for the lpMemoryUsageAvgMinTable.
lpMemoryUsageAvgMinTable	1.3.6.1.4.1.562.2.4.1.12.277		not-accessible	This attribute indicates the processor's minimum memory utilization (in kilobytes) for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
G32 lpMemoryUsageAvgMinValue	1.3.6.1.4.1.562.2.4.1.12.277.1.2	Gauge32	read-only	This variable represents an individual value for the lpMemoryUsageAvgMinTable.
lpMemoryUsageAvgTable	1.3.6.1.4.1.562.2.4.1.12.276		not-accessible	This attribute indicates the processor's average memory utilization (in kilobytes) for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
G32 lpMemoryUsageAvgValue	1.3.6.1.4.1.562.2.4.1.12.276.1.2	Gauge32	read-only	This variable represents an individual value for the lpMemoryUsageAvgTable.
lpMemoryUsageEntry	1.3.6.1.4.1.562.2.4.1.12.245.1		not-accessible	An entry in the lpMemoryUsageTable.
INT lpMemoryUsageIndex	1.3.6.1.4.1.562.2.4.1.12.245.1.1	INTEGER	not-accessible	This variable represents the lpMemoryUsageTable specific index for the lpMemoryUsageTable.
lpMemoryUsageTable	1.3.6.1.4.1.562.2.4.1.12.245		not-accessible	This attribute indicates the processor's current memory utilization (in kilobytes) for each type of memory.
G32 lpMemoryUsageValue	1.3.6.1.4.1.562.2.4.1.12.245.1.2	Gauge32	read-only	This variable represents an individual value for the lpMemoryUsageTable.
U32 lpMsgBlockCapacity	1.3.6.1.4.1.562.2.4.1.12.105.1.1	Unsigned32	read-only	This attribute indicates the processor card's shared message block memory capacity (in kilobytes).
G32 lpMsgBlockUsage	1.3.6.1.4.1.562.2.4.1.12.104.1.6	Gauge32	read-only	This attribute indicates the processor's current shared message block memory utilization (in kilobytes). If there is no shared memory on the card, this attribute indicates 0.
G32 lpMsgBlockUsageAvg	1.3.6.1.4.1.562.2.4.1.12.104.1.7	Gauge32	read-only	This attribute indicates the processor's average memory utilization (in kilobytes) of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this average memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
G32 lpMsgBlockUsageAvgMax	1.3.6.1.4.1.562.2.4.1.12.104.1.9	Gauge32	read-only	This attribute indicates the processor's maximum memory utilization (in kilobytes) of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this maximum memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
G32 lpMsgBlockUsageAvgMin	1.3.6.1.4.1.562.2.4.1.12.104.1.8	Gauge32	read-only	This attribute indicates the processor's minimum memory utilization (in kilobytes) of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this minimum memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
INT lpOperationalState	1.3.6.1.4.1.562.2.4.1.12.102.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
lpOperEntry	1.3.6.1.4.1.562.2.4.1.12.103.1		not-accessible	An entry in the lpOperTable.
lpOperTable	1.3.6.1.4.1.562.2.4.1.12.103		not-accessible	This Group contains the operational attributes for the LP component.
OCT lpProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.102.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
lpProvEntry	1.3.6.1.4.1.562.2.4.1.12.100.1		not-accessible	An entry in the lpProvTable.
lpProvTable	1.3.6.1.4.1.562.2.4.1.12.100		not-accessible	This Group contains the provisionable attributes for the LP component.
INT lpRestartOnCpSwitch	1.3.6.1.4.1.562.2.4.1.12.103.1.4	INTEGER	read-only	This attribute indicates whether the Lp always restarts upon a CP switchover. The value is true if the featureList of the associated Sw Lpt component contains a feature that does not support hitless CP switchover. The value is also true when the feature noHitlessCpSwitch is provisioned on the CP. A value of false does not guarantee 'no restart'; dynamic conditions may still result in an FP restart when a CP switchover occurs.
ROW lpRowStatus	1.3.6.1.4.1.562.2.4.1.12.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lp components. These components can be added and deleted.
lpRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.1.1		not-accessible	A single entry in the table represents a single lp component.
lpRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.1		not-accessible	This entry controls the addition and deletion of lp components.
ENT lpScheduledSwitchover	1.3.6.1.4.1.562.2.4.1.12.103.1.5	EnterpriseDateAndTime	read-only	This attribute indicates the execution time of the scheduled switchover. When there is no switchover scheduled the time is equals to 0 (0000-00-00 00:00).
lpSdh	1.3.6.1.4.1.562.2.4.1.12.15
lpSdhAdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.15.12.1		not-accessible	An entry in the lpSdhAdminInfoTable.
lpSdhAdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.15.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT lpSdhAdminState	1.3.6.1.4.1.562.2.4.1.12.15.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpSdhAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.15.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT lpSdhAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.15.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
lpSdhCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.15.11.1		not-accessible	An entry in the lpSdhCidDataTable.
lpSdhCidDataTable	1.3.6.1.4.1.562.2.4.1.12.15.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
INT lpSdhClockingSource	1.3.6.1.4.1.562.2.4.1.12.15.10.1.1	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the OC-3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means the use of a signal phase-locked to the incoming OC-3 line rate; module means the use of a signal phase-locked to the CP reference clock. When adding a Sonet/Sdh component, the clockingSource attribute is set to module if the NetworkSynchronization component has been added and is set to local otherwise. Note that the multiport OC-3 cell-based cards has one common clock source for each of the three ports when either the clocking source local or module is selected. For this reason, it is not allowed to have at the same time the clockingSource attribute set to local on one port and module on another port. Furthermore, the clockingSource attribute cannot be set to module if the NetworkSynchronization component has not been added.
STR lpSdhCommentText	1.3.6.1.4.1.562.2.4.1.12.15.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpSdhComponentName	1.3.6.1.4.1.562.2.4.1.12.15.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT lpSdhControlStatus	1.3.6.1.4.1.562.2.4.1.12.15.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 lpSdhCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.15.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
C32 lpSdhErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an near-end error free state.
C32 lpSdhFarEndLineAisSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.19	Counter32	read-only	This attribute indicates the total number of Far-End Line AIS Seconds (FELAISSs) that have been counted. A FELAISS is declared for second intervals one or more L-RDI defects. Counting of FELAISS is inhibited over second intervals where a FELUAS is counted.
C32 lpSdhFarEndLineCodeViolations	1.3.6.1.4.1.562.2.4.1.12.15.17.1.16	Counter32	read-only	This attribute indicates the total number of line FEBE detected from the incoming line. The counting of line FEBE is inhibited for second intervals where a Far-End Line Severely Errored Second (FELSES) is counted. Counting of FELCVs is also inhibited over second intervals where a Far-End Line Unavailable Second (FELUAS) is counted. The count wraps at its maximum value.
C32 lpSdhFarEndLineErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.17	Counter32	read-only	This attribute indicates the total number of Far-End Line Errored Seconds (FELESs) that have been counted. A FELES is declared for second intervals containing one or more Far-End Line CVs (FELCVs) or one or more L-RDI defects. Counting of FELES is inhibited over second intervals where a FELUAS is counted.
C32 lpSdhFarEndLineErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.15	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an far-end error free state.
C32 lpSdhFarEndLineFailures	1.3.6.1.4.1.562.2.4.1.12.15.17.1.21	Counter32	read-only	This attribute indicates the total number of times that a far-end line failure (L-RFI failure) has been declared.
C32 lpSdhFarEndLineSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.18	Counter32	read-only	This attribute indicates the total number of Far-End Line Severely Errored Seconds (FELSESs) that have been counted. A FELSES is declared for second intervals containing more than x FELCVs or one or more L-RDI defects. The value of x is 154 for a 155 Mbits/ sec interface. Counting of FELSES is inhibited over second intervals where a FELUAS is counted.
C32 lpSdhFarEndLineUnavailSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.20	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS far-end line is unavailable. The STS far-end line becomes unavailable at the onset of 10 consecutive FELSESs. The 10 FELSESs are included in the unavailable time. Once unavailable, the STS far-end line becomes available at the onset of 10 contiguous seconds with no FELSES. The 10 seconds with no FELSES are excluded from the unavailable time. For second intervals where a Far-End Line Unavailable Second (FELUAS) is counted, counting of FELCV, FELES, FELSES and FELAISS is inhibited.
INT lpSdhIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.15.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
lpSdhIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.15.13.1		not-accessible	An entry in the lpSdhIfEntryTable.
lpSdhIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.15.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM lpSdhIfIndex	1.3.6.1.4.1.562.2.4.1.12.15.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 lpSdhIndex	1.3.6.1.4.1.562.2.4.1.12.15.1.1.10	Integer32	not-accessible	This variable represents the index for the lpSdh tables.
C32 lpSdhLineAisSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.12	Counter32	read-only	This attribute indicates the total number of Line AIS Seconds (LAISSs) that have been counted. A LAISS is declared for second intervals containing one or more L-AIS defects. Counting of LAISS is inhibited over second intervals where a LUAS is counted.
C32 lpSdhLineCodeViolations	1.3.6.1.4.1.562.2.4.1.12.15.17.1.9	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. Counting of LCVs is also inhibited over second intervals where a Line Unavailable Second (LUAS) is counted. The count wraps at its maximum value.
C32 lpSdhLineErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.10	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LESs) that have been counted. A LES is declared for second intervals containing one or more LCVs or one or more line AIS defects. Counting of LES is inhibited over second intervals where a LUAS is counted.
C32 lpSdhLineFailures	1.3.6.1.4.1.562.2.4.1.12.15.17.1.14	Counter32	read-only	This attribute indicates the total number of times that a line failure (L-AIS failure) has been declared.
C32 lpSdhLineSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.11	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSESs) that have been counted. A LSES is declared for second intervals containing more than x LCVs or one or more L- AIS defects. The value of x is 154 for a 155 Mbits/sec interface. Counting of LSES is inhibited over second intervals where a LUAS is counted.
C32 lpSdhLineUnavailSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS line is unavailable. The STS line becomes unavailable at the onset of 10 consecutive LSESs. The 10 LSESs are included in the unavailable time. Once unavailable, the STS line becomes available at the onset of 10 contiguous seconds with no LSES. The 10 seconds with no LSES are excluded from the unavailable time. For second intervals where a Line Unavailable Second (LUAS) is counted, counting of LCV, LES, LSES and LAISS is inhibited.
INT lpSdhLofAlarm	1.3.6.1.4.1.562.2.4.1.12.15.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when LOF defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, except when an LOS defect or failure is present. An LOF defect is detected when getting contiguous errored frame alignment for at least 3 msec. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSdhLosAlarm	1.3.6.1.4.1.562.2.4.1.12.15.16.1.1	INTEGER	read-only	This attribute indicates whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, or if an LOS defect is present when the criteria for LOF failure declaration have been met. A LOS defect is declared when 20+/-3 us of all-zeros pattern is detected. The LOS defect is cleared when two valid framing words are detected and no Loss Of Signal condition is detected during an interval of 20+/-3 us. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSdhOperationalState	1.3.6.1.4.1.562.2.4.1.12.15.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
lpSdhOperEntry	1.3.6.1.4.1.562.2.4.1.12.15.16.1		not-accessible	An entry in the lpSdhOperTable.
lpSdhOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.15.14.1		not-accessible	An entry in the lpSdhOperStatusTable.
lpSdhOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.15.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpSdhOperTable	1.3.6.1.4.1.562.2.4.1.12.15.16		not-accessible	This group contains the common operational data for Sonet or Sdh component.
lpSdhPath	1.3.6.1.4.1.562.2.4.1.12.15.2
INT lpSdhPathAdminState	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpSdhPathAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN lpSdhPathApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.15.2.10.1.1	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the Path component.
OCT lpSdhPathAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
lpSdhPathCell	1.3.6.1.4.1.562.2.4.1.12.15.2.2
U32 lpSdhPathCellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.15.2.2.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
STR lpSdhPathCellComponentName	1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 lpSdhPathCellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
INT lpSdhPathCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.15.2.2.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
NON lpSdhPathCellIndex	1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpSdhPathCell tables.
INT lpSdhPathCellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.15.2.2.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
lpSdhPathCellOperEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.2.11.1		not-accessible	An entry in the lpSdhPathCellOperTable.
lpSdhPathCellOperTable	1.3.6.1.4.1.562.2.4.1.12.15.2.2.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpSdhPathCellProvEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.2.10.1		not-accessible	An entry in the lpSdhPathCellProvTable.
lpSdhPathCellProvTable	1.3.6.1.4.1.562.2.4.1.12.15.2.2.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
G32 lpSdhPathCellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
ROW lpSdhPathCellRowStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpSdhPathCell components. These components cannot be added nor deleted.
lpSdhPathCellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1		not-accessible	A single entry in the table represents a single lpSdhPathCell component.
lpSdhPathCellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.15.2.2.1		not-accessible	This entry controls the addition and deletion of lpSdhPathCell components.
INT lpSdhPathCellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.15.2.2.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
C32 lpSdhPathCellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
lpSdhPathCellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1		not-accessible	An entry in the lpSdhPathCellStatsTable.
lpSdhPathCellStatsTable	1.3.6.1.4.1.562.2.4.1.12.15.2.2.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO lpSdhPathCellStorageType	1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSdhPathCell tables.
G32 lpSdhPathCellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 lpSdhPathCellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
lpSdhPathCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.11.1		not-accessible	An entry in the lpSdhPathCidDataTable.
lpSdhPathCidDataTable	1.3.6.1.4.1.562.2.4.1.12.15.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
STR lpSdhPathComponentName	1.3.6.1.4.1.562.2.4.1.12.15.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT lpSdhPathControlStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 lpSdhPathCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.15.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
C32 lpSdhPathFarEndPathAisLopSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.12	Counter32	read-only	This attribute indicates the total number of Far-End Path AIS and LOP Seconds (FEPALSs). A FEPALS is declared for second intervals containing one or more P-RDI defects. Counting of FEPALS is inhibited when FEPUAS is counted over the monitored second.
C32 lpSdhPathFarEndPathCodeViolations	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.9	Counter32	read-only	This attribute indicates the total number of Far-End Path Code Violations (FEPCVs) detected. Each FEPCV corresponds to a path FEBE. FEPCV counting is inhibited over second intervals where a Far-End Path Severely Errored Second (FEPSES) is counted. Counting of PCVs is also inhibited over second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted. The count wraps at its maximum value.
C32 lpSdhPathFarEndPathErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.10	Counter32	read-only	This attribute indicates the total number of Far-End Path Errored Seconds (FEPESs) that have been counted. A FEPES is declared for second intervals containing one or more FEPCVs or one or more path RDI (P-RDI) defects. Counting of FEPES is inhibited when FEPUAS is counted over the monitored second.
C32 lpSdhPathFarEndPathErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.8	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an far-end error free state.
C32 lpSdhPathFarEndPathFailures	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.14	Counter32	read-only	This attribute indicates the total number of times that a STS/STM far-end path failure (P-RFI failure) has been declared.
C32 lpSdhPathFarEndPathSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.11	Counter32	read-only	This attribute indicates the total number of Far-End Path Severely Errored Seconds (FEPSESs) that have been counted. A FEPSES is declared for second intervals containing more than x FEPCVs or one or more P-RDI defects. The value of x is 2400 for a 155 Mbits/ sec interface. Counting of FEPSESs is inhibited when FEPUAS is counted over the monitored second.
C32 lpSdhPathFarEndPathUnavailSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM far-end path is unavailable. The far-end path becomes unavailable at the onset of 10 consecutive FEPSESs. The 10 FEPSESs are included in the unavailable time. Once unavailable, the far-end path becomes available at the onset of 10 contiguous seconds with no FEPSES. The 10 seconds with no FEPSES are excluded from the unavailable time. For second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted, counting of FEPCV, FEPES, FEPSES and FEPALS is inhibited.
INT lpSdhPathIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
lpSdhPathIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.13.1		not-accessible	An entry in the lpSdhPathIfEntryTable.
lpSdhPathIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.15.2.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM lpSdhPathIfIndex	1.3.6.1.4.1.562.2.4.1.12.15.2.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 lpSdhPathIndex	1.3.6.1.4.1.562.2.4.1.12.15.2.1.1.10	Integer32	not-accessible	This variable represents the index for the lpSdhPath tables.
INT lpSdhPathLopAlarm	1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOP defect occurs when no valid SPE or VC pointer was received in 8 contiguous frames. If the LOP defects are intermittently occurring, the LOP defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the LOP alarm condition is cleared. The condition is cleared when no more invalid pointer has been reported for 10 seconds +/- 0.5 seconds. The lopAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSdhPathOperationalState	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
lpSdhPathOperEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.15.1		not-accessible	An entry in the lpSdhPathOperTable.
lpSdhPathOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.14.1		not-accessible	An entry in the lpSdhPathOperStatusTable.
lpSdhPathOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.15.2.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpSdhPathOperTable	1.3.6.1.4.1.562.2.4.1.12.15.2.15		not-accessible	This group contains the common operational data for Path component.
C32 lpSdhPathPathAisLopSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.5	Counter32	read-only	This attribute indicates the total number of path AIS and LOP Seconds (PALSs). A PALS is declared for second intervals containing one or more path AIS or LOP defects. Counting of PALS is inhibited when PUAS is counted over the monitored second.
C32 lpSdhPathPathCodeViolations	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.2	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. The count wraps at its maximum value.
C32 lpSdhPathPathErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.3	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more PCVs or one or more LOP or path AIS defects. Counting of PES is inhibited when PUAS is counted over the monitored second.
C32 lpSdhPathPathErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.1	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an near-end error free state.
C32 lpSdhPathPathFailures	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.7	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOP, P-AIS or Path Signal Label Mismatch failure) has been declared.
C32 lpSdhPathPathSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.4	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than x PCVs or one or more LOP or path AIS defects. The value of x is 2400 for a 155 Mbits/sec interface. Counting of PSES is inhibited when PUAS is counted over the monitored second.
C32 lpSdhPathPathUnavailSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.6	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM path is unavailable. The path becomes unavailable at the onset of 10 consecutive PSESs. The 10 PSESs are included in the unavailable time. Once unavailable, the path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where a Path Unavailable Second (PUAS) is counted, counting of PCV, PES, PSES and PALS is inhibited.
OCT lpSdhPathProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
lpSdhPathProvEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.10.1		not-accessible	An entry in the lpSdhPathProvTable.
lpSdhPathProvTable	1.3.6.1.4.1.562.2.4.1.12.15.2.10		not-accessible	This group contains all of the provisioning data for a Sonet/Sdh Path component.
ROW lpSdhPathRowStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpSdhPath components. These components can be added and deleted.
lpSdhPathRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.1.1		not-accessible	A single entry in the table represents a single lpSdhPath component.
lpSdhPathRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.15.2.1		not-accessible	This entry controls the addition and deletion of lpSdhPath components.
INT lpSdhPathRxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.2	INTEGER	read-only	This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the occurrence of the P-AIS signal in three contiguous valid STS or STM frames (all one's in bytes H1 and H2). If the P-AIS defects are intermittently occurring, the P-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-AIS alarm condition is cleared. The condition is cleared after no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSdhPathRxRfiAlarm	1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.3	INTEGER	read-only	This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is entered when Path Remote Defect Indicator (P-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-RDI defect is the occurrence of the P-RDI signal in five contiguous valid STS or STM frames (bit 5 of the G1 byte set to 1). If the P-RDI defects are intermittently occurring, the P-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10)with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-RFI alarm condition is cleared. The condition is cleared after no P-RDI defect has been detected for 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSdhPathSignalLabelMismatch	1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.4	INTEGER	read-only	This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM defects have been observed and accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM defect occurs when detecting an unexpected path signal label. The expected Path signal labels are 'Mapping for ATM' or 'Equipped - Non Specific Payload'. If the P-SLM defects are intermittently occurring, the P-SLM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the Path Signal Label Mismatch failure condition is cleared. The condition is cleared when an expected path signal label is received for 10 seconds +/- 0.5 seconds. The signalLabelMismatch attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSdhPathSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpSdhPathStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
lpSdhPathStateEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1		not-accessible	An entry in the lpSdhPathStateTable.
lpSdhPathStateTable	1.3.6.1.4.1.562.2.4.1.12.15.2.12		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpSdhPathStatsEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1		not-accessible	An entry in the lpSdhPathStatsTable.
lpSdhPathStatsTable	1.3.6.1.4.1.562.2.4.1.12.15.2.16		not-accessible	This group contains the statistics data for a Sonet/Sdh Path component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO lpSdhPathStorageType	1.3.6.1.4.1.562.2.4.1.12.15.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSdhPath tables.
INT lpSdhPathTxAis	1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.5	INTEGER	read-only	This attribute displays whether the Path Alarm Indication Signal (P- AIS) signal is being transmitted on the path. The P-AIS signal is transmitted when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSdhPathTxRdi	1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.6	INTEGER	read-only	This attribute displays whether the Path Remote Defect Indicator (P-RDI) signal is being transmitted over the path signal. The P-RDI signal is transmitted over the outgoing line upon detection of LOP, P-AIS or the occurrence of the LCD state. This attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSdhPathUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpSdhPathUsageState	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpSdhProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.15.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
lpSdhProvEntry	1.3.6.1.4.1.562.2.4.1.12.15.10.1		not-accessible	An entry in the lpSdhProvTable.
lpSdhProvTable	1.3.6.1.4.1.562.2.4.1.12.15.10		not-accessible	This group contains all of the provisioning data for a Sonet or Sdh component.
ROW lpSdhRowStatus	1.3.6.1.4.1.562.2.4.1.12.15.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpSdh components. These components can be added and deleted.
lpSdhRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.15.1.1		not-accessible	A single entry in the table represents a single lpSdh component.
lpSdhRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.15.1		not-accessible	This entry controls the addition and deletion of lpSdh components.
C32 lpSdhRunningTime	1.3.6.1.4.1.562.2.4.1.12.15.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the Sonet/ Sdh component has been activated and been in unlocked state. All the other error counts that follow can be updated when this count is active.
INT lpSdhRxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.15.16.1.3	INTEGER	read-only	This attribute displays whether a Line Alarm Indication Signal (L- AIS) alarm state has been entered. An L-AIS alarm state is entered when L-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-AIS defect is the occurrence of the L-AIS signal in five contiguous STS (STM) frames (111 pattern in bits 6,7, and 8 of the K2 bytes). If the L-AIS defects are intermittently occurring, the L-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-AIS alarm condition is cleared. The condition is cleared after not detecting the L-AIS signal for a period of 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSdhRxRfiAlarm	1.3.6.1.4.1.562.2.4.1.12.15.16.1.4	INTEGER	read-only	This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure Indication (L-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-RDI defect is the occurrence of the L-RDI signal in five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and 8 of the K2 bytes). If the L-RDI defects are intermittently occurring, the L-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-RFI alarm condition is cleared. The condition is cleared after not detecting the L-RDI signal for a period of 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the component has been locked and left offline.
C32 lpSdhSectCodeViolations	1.3.6.1.4.1.562.2.4.1.12.15.17.1.3	Counter32	read-only	This attribute indicates the total number of Section Code Violations (SCVs) detected. A SCV corresponds to section BIP-8 error. SCV counting is inhibited for second intervals where a Section Severely Errored Second (SSES) is counted. The count wraps at its maximum value.
C32 lpSdhSectErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.4	Counter32	read-only	This attribute indicates the total number of Section Errored Seconds (SESs) that have been counted. A SES is declared for second intervals containing one or more SCVs or one or more Loss Of Signal (LOS) or Severely Errored Frame (SEF) defects. A SEF defect is the occurrence of 4 contiguous errored STS or STM frame alignment words.
C32 lpSdhSectFailures	1.3.6.1.4.1.562.2.4.1.12.15.17.1.8	Counter32	read-only	This attribute indicates the total number of times that a section failure (LOS or LOF failure) has been declared.
C32 lpSdhSectLosSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.6	Counter32	read-only	This attribute indicates the total number of Section LOS Seconds (SLOSSs) that have been counted. A SLOSS is declared for second intervals containing one or more LOS defects.
C32 lpSdhSectSevErroredFrmSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.7	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Frame Seconds (SSEFSs) that have been counted. A SSEFS is declared for second intervals containing one or more SEF defects.
C32 lpSdhSectSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.5	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Seconds (SSESs) that have been counted. A SSES is declared for second intervals containing more than x SCVs or one or more LOS or SEF defects. The value of x is 155 for a 155 Mbits/sec interface.
INT lpSdhSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.15.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpSdhStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.15.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
lpSdhStateEntry	1.3.6.1.4.1.562.2.4.1.12.15.15.1		not-accessible	An entry in the lpSdhStateTable.
lpSdhStateTable	1.3.6.1.4.1.562.2.4.1.12.15.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpSdhStatsEntry	1.3.6.1.4.1.562.2.4.1.12.15.17.1		not-accessible	An entry in the lpSdhStatsTable.
lpSdhStatsTable	1.3.6.1.4.1.562.2.4.1.12.15.17		not-accessible	This group contains the statistics data for a Sonet or Sdh component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO lpSdhStorageType	1.3.6.1.4.1.562.2.4.1.12.15.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSdh tables.
lpSdhTest	1.3.6.1.4.1.562.2.4.1.12.15.3
INT lpSdhTestAdminState	1.3.6.1.4.1.562.2.4.1.12.15.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR lpSdhTestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpSdhTestBitsRx	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpSdhTestBitsTx	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpSdhTestBytesRx	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpSdhTestBytesTx	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT lpSdhTestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
STR lpSdhTestComponentName	1.3.6.1.4.1.562.2.4.1.12.15.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX lpSdhTestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpSdhTestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpSdhTestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpSdhTestDuration	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 lpSdhTestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM lpSdhTestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
INT lpSdhTestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM lpSdhTestFrmRx	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 lpSdhTestFrmSize	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM lpSdhTestFrmTx	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON lpSdhTestIndex	1.3.6.1.4.1.562.2.4.1.12.15.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpSdhTest tables.
INT lpSdhTestOperationalState	1.3.6.1.4.1.562.2.4.1.12.15.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR lpSdhTestPurpose	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
lpSdhTestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1		not-accessible	An entry in the lpSdhTestResultsTable.
lpSdhTestResultsTable	1.3.6.1.4.1.562.2.4.1.12.15.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW lpSdhTestRowStatus	1.3.6.1.4.1.562.2.4.1.12.15.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpSdhTest components. These components cannot be added nor deleted.
lpSdhTestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.15.3.1.1		not-accessible	A single entry in the table represents a single lpSdhTest component.
lpSdhTestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.15.3.1		not-accessible	This entry controls the addition and deletion of lpSdhTest components.
lpSdhTestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1		not-accessible	An entry in the lpSdhTestSetupTable.
lpSdhTestSetupTable	1.3.6.1.4.1.562.2.4.1.12.15.3.11		not-accessible	This group contains all of the operational data for a Test component.
lpSdhTestStateEntry	1.3.6.1.4.1.562.2.4.1.12.15.3.10.1		not-accessible	An entry in the lpSdhTestStateTable.
lpSdhTestStateTable	1.3.6.1.4.1.562.2.4.1.12.15.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO lpSdhTestStorageType	1.3.6.1.4.1.562.2.4.1.12.15.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSdhTest tables.
U32 lpSdhTestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpSdhTestType	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpSdhTestUsageState	1.3.6.1.4.1.562.2.4.1.12.15.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpSdhTxAis	1.3.6.1.4.1.562.2.4.1.12.15.16.1.5	INTEGER	read-only	This attribute displays whether the Line Alarm Indication Signal (L- AIS) signal is being transmitted on the outgoing line. This signal is transmitted when the Sonet/Sdh is locked and left offline.
INT lpSdhTxRdi	1.3.6.1.4.1.562.2.4.1.12.15.16.1.6	INTEGER	read-only	This attribute displays whether the Line Remote Defect Indicator (L-RDI) signal is being transmitted over the OC-3 line. The L-RDI signal is transmitted upon the detection of the LOS, LOF or L-AIS defect. This attribute is always set to off when the component has been locked and left offline.
INT lpSdhUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.15.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpSdhUnusableTxClockRefAlarm	1.3.6.1.4.1.562.2.4.1.12.15.16.1.7	INTEGER	read-only	This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is entered when a Sonet/Sdh port provisioned to act as a transmit clock reference has received the code 'do not use for synchronization' in the S1 byte (in the SONET/ SDH line overhead) for 2.5 +/- 0.5 seconds. The condition is cleared after not detecting the 'do not use for synchronization' code for a period of 10 +/- 0.5 seconds or when the port is no longer provisioned to act as a transmit clock reference. A port is acting as a transmit clock reference if it is provisioned with a) a clockingSource of line, or b) it has been provisioned as a primaryReference, secondaryReference or tertiaryReference in the NetworkSynchronization component. The unusableTxClockRefAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSdhUsageState	1.3.6.1.4.1.562.2.4.1.12.15.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR lpSdhVendor	1.3.6.1.4.1.562.2.4.1.12.15.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
lpSonet	1.3.6.1.4.1.562.2.4.1.12.14
lpSonetAdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.14.12.1		not-accessible	An entry in the lpSonetAdminInfoTable.
lpSonetAdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.14.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT lpSonetAdminState	1.3.6.1.4.1.562.2.4.1.12.14.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpSonetAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.14.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT lpSonetAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.14.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
lpSonetCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.14.11.1		not-accessible	An entry in the lpSonetCidDataTable.
lpSonetCidDataTable	1.3.6.1.4.1.562.2.4.1.12.14.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
INT lpSonetClockingSource	1.3.6.1.4.1.562.2.4.1.12.14.10.1.1	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the OC-3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means the use of a signal phase-locked to the incoming OC-3 line rate; module means the use of a signal phase-locked to the CP reference clock. When adding a Sonet/Sdh component, the clockingSource attribute is set to module if the NetworkSynchronization component has been added and is set to local otherwise. Note that the multiport OC-3 cell-based cards has one common clock source for each of the three ports when either the clocking source local or module is selected. For this reason, it is not allowed to have at the same time the clockingSource attribute set to local on one port and module on another port. Furthermore, the clockingSource attribute cannot be set to module if the NetworkSynchronization component has not been added.
STR lpSonetCommentText	1.3.6.1.4.1.562.2.4.1.12.14.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpSonetComponentName	1.3.6.1.4.1.562.2.4.1.12.14.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT lpSonetControlStatus	1.3.6.1.4.1.562.2.4.1.12.14.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 lpSonetCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.14.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
C32 lpSonetErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an near-end error free state.
C32 lpSonetFarEndLineAisSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.19	Counter32	read-only	This attribute indicates the total number of Far-End Line AIS Seconds (FELAISSs) that have been counted. A FELAISS is declared for second intervals one or more L-RDI defects. Counting of FELAISS is inhibited over second intervals where a FELUAS is counted.
C32 lpSonetFarEndLineCodeViolations	1.3.6.1.4.1.562.2.4.1.12.14.17.1.16	Counter32	read-only	This attribute indicates the total number of line FEBE detected from the incoming line. The counting of line FEBE is inhibited for second intervals where a Far-End Line Severely Errored Second (FELSES) is counted. Counting of FELCVs is also inhibited over second intervals where a Far-End Line Unavailable Second (FELUAS) is counted. The count wraps at its maximum value.
C32 lpSonetFarEndLineErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.17	Counter32	read-only	This attribute indicates the total number of Far-End Line Errored Seconds (FELESs) that have been counted. A FELES is declared for second intervals containing one or more Far-End Line CVs (FELCVs) or one or more L-RDI defects. Counting of FELES is inhibited over second intervals where a FELUAS is counted.
C32 lpSonetFarEndLineErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.15	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an far-end error free state.
C32 lpSonetFarEndLineFailures	1.3.6.1.4.1.562.2.4.1.12.14.17.1.21	Counter32	read-only	This attribute indicates the total number of times that a far-end line failure (L-RFI failure) has been declared.
C32 lpSonetFarEndLineSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.18	Counter32	read-only	This attribute indicates the total number of Far-End Line Severely Errored Seconds (FELSESs) that have been counted. A FELSES is declared for second intervals containing more than x FELCVs or one or more L-RDI defects. The value of x is 154 for a 155 Mbits/ sec interface. Counting of FELSES is inhibited over second intervals where a FELUAS is counted.
C32 lpSonetFarEndLineUnavailSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.20	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS far-end line is unavailable. The STS far-end line becomes unavailable at the onset of 10 consecutive FELSESs. The 10 FELSESs are included in the unavailable time. Once unavailable, the STS far-end line becomes available at the onset of 10 contiguous seconds with no FELSES. The 10 seconds with no FELSES are excluded from the unavailable time. For second intervals where a Far-End Line Unavailable Second (FELUAS) is counted, counting of FELCV, FELES, FELSES and FELAISS is inhibited.
INT lpSonetIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.14.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
lpSonetIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.14.13.1		not-accessible	An entry in the lpSonetIfEntryTable.
lpSonetIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.14.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM lpSonetIfIndex	1.3.6.1.4.1.562.2.4.1.12.14.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 lpSonetIndex	1.3.6.1.4.1.562.2.4.1.12.14.1.1.10	Integer32	not-accessible	This variable represents the index for the lpSonet tables.
C32 lpSonetLineAisSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.12	Counter32	read-only	This attribute indicates the total number of Line AIS Seconds (LAISSs) that have been counted. A LAISS is declared for second intervals containing one or more L-AIS defects. Counting of LAISS is inhibited over second intervals where a LUAS is counted.
C32 lpSonetLineCodeViolations	1.3.6.1.4.1.562.2.4.1.12.14.17.1.9	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. Counting of LCVs is also inhibited over second intervals where a Line Unavailable Second (LUAS) is counted. The count wraps at its maximum value.
C32 lpSonetLineErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.10	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LESs) that have been counted. A LES is declared for second intervals containing one or more LCVs or one or more line AIS defects. Counting of LES is inhibited over second intervals where a LUAS is counted.
C32 lpSonetLineFailures	1.3.6.1.4.1.562.2.4.1.12.14.17.1.14	Counter32	read-only	This attribute indicates the total number of times that a line failure (L-AIS failure) has been declared.
C32 lpSonetLineSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.11	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSESs) that have been counted. A LSES is declared for second intervals containing more than x LCVs or one or more L- AIS defects. The value of x is 154 for a 155 Mbits/sec interface. Counting of LSES is inhibited over second intervals where a LUAS is counted.
C32 lpSonetLineUnavailSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS line is unavailable. The STS line becomes unavailable at the onset of 10 consecutive LSESs. The 10 LSESs are included in the unavailable time. Once unavailable, the STS line becomes available at the onset of 10 contiguous seconds with no LSES. The 10 seconds with no LSES are excluded from the unavailable time. For second intervals where a Line Unavailable Second (LUAS) is counted, counting of LCV, LES, LSES and LAISS is inhibited.
INT lpSonetLofAlarm	1.3.6.1.4.1.562.2.4.1.12.14.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when LOF defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, except when an LOS defect or failure is present. An LOF defect is detected when getting contiguous errored frame alignment for at least 3 msec. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSonetLosAlarm	1.3.6.1.4.1.562.2.4.1.12.14.16.1.1	INTEGER	read-only	This attribute indicates whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, or if an LOS defect is present when the criteria for LOF failure declaration have been met. A LOS defect is declared when 20+/-3 us of all-zeros pattern is detected. The LOS defect is cleared when two valid framing words are detected and no Loss Of Signal condition is detected during an interval of 20+/-3 us. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSonetOperationalState	1.3.6.1.4.1.562.2.4.1.12.14.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
lpSonetOperEntry	1.3.6.1.4.1.562.2.4.1.12.14.16.1		not-accessible	An entry in the lpSonetOperTable.
lpSonetOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.14.14.1		not-accessible	An entry in the lpSonetOperStatusTable.
lpSonetOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.14.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpSonetOperTable	1.3.6.1.4.1.562.2.4.1.12.14.16		not-accessible	This group contains the common operational data for Sonet or Sdh component.
lpSonetPath	1.3.6.1.4.1.562.2.4.1.12.14.2
INT lpSonetPathAdminState	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpSonetPathAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN lpSonetPathApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.14.2.10.1.1	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the Path component.
OCT lpSonetPathAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
lpSonetPathCell	1.3.6.1.4.1.562.2.4.1.12.14.2.2
U32 lpSonetPathCellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.14.2.2.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
STR lpSonetPathCellComponentName	1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 lpSonetPathCellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
INT lpSonetPathCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.14.2.2.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
NON lpSonetPathCellIndex	1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpSonetPathCell tables.
INT lpSonetPathCellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.14.2.2.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
lpSonetPathCellOperEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.2.11.1		not-accessible	An entry in the lpSonetPathCellOperTable.
lpSonetPathCellOperTable	1.3.6.1.4.1.562.2.4.1.12.14.2.2.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpSonetPathCellProvEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.2.10.1		not-accessible	An entry in the lpSonetPathCellProvTable.
lpSonetPathCellProvTable	1.3.6.1.4.1.562.2.4.1.12.14.2.2.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
G32 lpSonetPathCellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
ROW lpSonetPathCellRowStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpSonetPathCell components. These components cannot be added nor deleted.
lpSonetPathCellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1		not-accessible	A single entry in the table represents a single lpSonetPathCell component.
lpSonetPathCellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.14.2.2.1		not-accessible	This entry controls the addition and deletion of lpSonetPathCell components.
INT lpSonetPathCellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.14.2.2.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
C32 lpSonetPathCellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
lpSonetPathCellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1		not-accessible	An entry in the lpSonetPathCellStatsTable.
lpSonetPathCellStatsTable	1.3.6.1.4.1.562.2.4.1.12.14.2.2.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO lpSonetPathCellStorageType	1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSonetPathCell tables.
G32 lpSonetPathCellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 lpSonetPathCellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
lpSonetPathCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.11.1		not-accessible	An entry in the lpSonetPathCidDataTable.
lpSonetPathCidDataTable	1.3.6.1.4.1.562.2.4.1.12.14.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
STR lpSonetPathComponentName	1.3.6.1.4.1.562.2.4.1.12.14.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT lpSonetPathControlStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 lpSonetPathCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.14.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
C32 lpSonetPathFarEndPathAisLopSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.12	Counter32	read-only	This attribute indicates the total number of Far-End Path AIS and LOP Seconds (FEPALSs). A FEPALS is declared for second intervals containing one or more P-RDI defects. Counting of FEPALS is inhibited when FEPUAS is counted over the monitored second.
C32 lpSonetPathFarEndPathCodeViolations	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.9	Counter32	read-only	This attribute indicates the total number of Far-End Path Code Violations (FEPCVs) detected. Each FEPCV corresponds to a path FEBE. FEPCV counting is inhibited over second intervals where a Far-End Path Severely Errored Second (FEPSES) is counted. Counting of PCVs is also inhibited over second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted. The count wraps at its maximum value.
C32 lpSonetPathFarEndPathErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.10	Counter32	read-only	This attribute indicates the total number of Far-End Path Errored Seconds (FEPESs) that have been counted. A FEPES is declared for second intervals containing one or more FEPCVs or one or more path RDI (P-RDI) defects. Counting of FEPES is inhibited when FEPUAS is counted over the monitored second.
C32 lpSonetPathFarEndPathErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.8	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an far-end error free state.
C32 lpSonetPathFarEndPathFailures	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.14	Counter32	read-only	This attribute indicates the total number of times that a STS/STM far-end path failure (P-RFI failure) has been declared.
C32 lpSonetPathFarEndPathSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.11	Counter32	read-only	This attribute indicates the total number of Far-End Path Severely Errored Seconds (FEPSESs) that have been counted. A FEPSES is declared for second intervals containing more than x FEPCVs or one or more P-RDI defects. The value of x is 2400 for a 155 Mbits/ sec interface. Counting of FEPSESs is inhibited when FEPUAS is counted over the monitored second.
C32 lpSonetPathFarEndPathUnavailSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM far-end path is unavailable. The far-end path becomes unavailable at the onset of 10 consecutive FEPSESs. The 10 FEPSESs are included in the unavailable time. Once unavailable, the far-end path becomes available at the onset of 10 contiguous seconds with no FEPSES. The 10 seconds with no FEPSES are excluded from the unavailable time. For second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted, counting of FEPCV, FEPES, FEPSES and FEPALS is inhibited.
INT lpSonetPathIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
lpSonetPathIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.13.1		not-accessible	An entry in the lpSonetPathIfEntryTable.
lpSonetPathIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.14.2.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM lpSonetPathIfIndex	1.3.6.1.4.1.562.2.4.1.12.14.2.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 lpSonetPathIndex	1.3.6.1.4.1.562.2.4.1.12.14.2.1.1.10	Integer32	not-accessible	This variable represents the index for the lpSonetPath tables.
INT lpSonetPathLopAlarm	1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOP defect occurs when no valid SPE or VC pointer was received in 8 contiguous frames. If the LOP defects are intermittently occurring, the LOP defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the LOP alarm condition is cleared. The condition is cleared when no more invalid pointer has been reported for 10 seconds +/- 0.5 seconds. The lopAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSonetPathOperationalState	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
lpSonetPathOperEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.15.1		not-accessible	An entry in the lpSonetPathOperTable.
lpSonetPathOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.14.1		not-accessible	An entry in the lpSonetPathOperStatusTable.
lpSonetPathOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.14.2.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpSonetPathOperTable	1.3.6.1.4.1.562.2.4.1.12.14.2.15		not-accessible	This group contains the common operational data for Path component.
C32 lpSonetPathPathAisLopSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.5	Counter32	read-only	This attribute indicates the total number of path AIS and LOP Seconds (PALSs). A PALS is declared for second intervals containing one or more path AIS or LOP defects. Counting of PALS is inhibited when PUAS is counted over the monitored second.
C32 lpSonetPathPathCodeViolations	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.2	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. The count wraps at its maximum value.
C32 lpSonetPathPathErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.3	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more PCVs or one or more LOP or path AIS defects. Counting of PES is inhibited when PUAS is counted over the monitored second.
C32 lpSonetPathPathErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.1	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an near-end error free state.
C32 lpSonetPathPathFailures	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.7	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOP, P-AIS or Path Signal Label Mismatch failure) has been declared.
C32 lpSonetPathPathSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.4	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than x PCVs or one or more LOP or path AIS defects. The value of x is 2400 for a 155 Mbits/sec interface. Counting of PSES is inhibited when PUAS is counted over the monitored second.
C32 lpSonetPathPathUnavailSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.6	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM path is unavailable. The path becomes unavailable at the onset of 10 consecutive PSESs. The 10 PSESs are included in the unavailable time. Once unavailable, the path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where a Path Unavailable Second (PUAS) is counted, counting of PCV, PES, PSES and PALS is inhibited.
OCT lpSonetPathProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
lpSonetPathProvEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.10.1		not-accessible	An entry in the lpSonetPathProvTable.
lpSonetPathProvTable	1.3.6.1.4.1.562.2.4.1.12.14.2.10		not-accessible	This group contains all of the provisioning data for a Sonet/Sdh Path component.
ROW lpSonetPathRowStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpSonetPath components. These components can be added and deleted.
lpSonetPathRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.1.1		not-accessible	A single entry in the table represents a single lpSonetPath component.
lpSonetPathRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.14.2.1		not-accessible	This entry controls the addition and deletion of lpSonetPath components.
INT lpSonetPathRxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.2	INTEGER	read-only	This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the occurrence of the P-AIS signal in three contiguous valid STS or STM frames (all one's in bytes H1 and H2). If the P-AIS defects are intermittently occurring, the P-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-AIS alarm condition is cleared. The condition is cleared after no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSonetPathRxRfiAlarm	1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.3	INTEGER	read-only	This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is entered when Path Remote Defect Indicator (P-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-RDI defect is the occurrence of the P-RDI signal in five contiguous valid STS or STM frames (bit 5 of the G1 byte set to 1). If the P-RDI defects are intermittently occurring, the P-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10)with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-RFI alarm condition is cleared. The condition is cleared after no P-RDI defect has been detected for 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSonetPathSignalLabelMismatch	1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.4	INTEGER	read-only	This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM defects have been observed and accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM defect occurs when detecting an unexpected path signal label. The expected Path signal labels are 'Mapping for ATM' or 'Equipped - Non Specific Payload'. If the P-SLM defects are intermittently occurring, the P-SLM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the Path Signal Label Mismatch failure condition is cleared. The condition is cleared when an expected path signal label is received for 10 seconds +/- 0.5 seconds. The signalLabelMismatch attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSonetPathSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpSonetPathStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
lpSonetPathStateEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1		not-accessible	An entry in the lpSonetPathStateTable.
lpSonetPathStateTable	1.3.6.1.4.1.562.2.4.1.12.14.2.12		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpSonetPathStatsEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1		not-accessible	An entry in the lpSonetPathStatsTable.
lpSonetPathStatsTable	1.3.6.1.4.1.562.2.4.1.12.14.2.16		not-accessible	This group contains the statistics data for a Sonet/Sdh Path component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO lpSonetPathStorageType	1.3.6.1.4.1.562.2.4.1.12.14.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSonetPath tables.
INT lpSonetPathTxAis	1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.5	INTEGER	read-only	This attribute displays whether the Path Alarm Indication Signal (P- AIS) signal is being transmitted on the path. The P-AIS signal is transmitted when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSonetPathTxRdi	1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.6	INTEGER	read-only	This attribute displays whether the Path Remote Defect Indicator (P-RDI) signal is being transmitted over the path signal. The P-RDI signal is transmitted over the outgoing line upon detection of LOP, P-AIS or the occurrence of the LCD state. This attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSonetPathUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpSonetPathUsageState	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpSonetProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.14.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
lpSonetProvEntry	1.3.6.1.4.1.562.2.4.1.12.14.10.1		not-accessible	An entry in the lpSonetProvTable.
lpSonetProvTable	1.3.6.1.4.1.562.2.4.1.12.14.10		not-accessible	This group contains all of the provisioning data for a Sonet or Sdh component.
ROW lpSonetRowStatus	1.3.6.1.4.1.562.2.4.1.12.14.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpSonet components. These components can be added and deleted.
lpSonetRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.14.1.1		not-accessible	A single entry in the table represents a single lpSonet component.
lpSonetRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.14.1		not-accessible	This entry controls the addition and deletion of lpSonet components.
C32 lpSonetRunningTime	1.3.6.1.4.1.562.2.4.1.12.14.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the Sonet/ Sdh component has been activated and been in unlocked state. All the other error counts that follow can be updated when this count is active.
INT lpSonetRxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.14.16.1.3	INTEGER	read-only	This attribute displays whether a Line Alarm Indication Signal (L- AIS) alarm state has been entered. An L-AIS alarm state is entered when L-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-AIS defect is the occurrence of the L-AIS signal in five contiguous STS (STM) frames (111 pattern in bits 6,7, and 8 of the K2 bytes). If the L-AIS defects are intermittently occurring, the L-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-AIS alarm condition is cleared. The condition is cleared after not detecting the L-AIS signal for a period of 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSonetRxRfiAlarm	1.3.6.1.4.1.562.2.4.1.12.14.16.1.4	INTEGER	read-only	This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure Indication (L-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-RDI defect is the occurrence of the L-RDI signal in five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and 8 of the K2 bytes). If the L-RDI defects are intermittently occurring, the L-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-RFI alarm condition is cleared. The condition is cleared after not detecting the L-RDI signal for a period of 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the component has been locked and left offline.
C32 lpSonetSectCodeViolations	1.3.6.1.4.1.562.2.4.1.12.14.17.1.3	Counter32	read-only	This attribute indicates the total number of Section Code Violations (SCVs) detected. A SCV corresponds to section BIP-8 error. SCV counting is inhibited for second intervals where a Section Severely Errored Second (SSES) is counted. The count wraps at its maximum value.
C32 lpSonetSectErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.4	Counter32	read-only	This attribute indicates the total number of Section Errored Seconds (SESs) that have been counted. A SES is declared for second intervals containing one or more SCVs or one or more Loss Of Signal (LOS) or Severely Errored Frame (SEF) defects. A SEF defect is the occurrence of 4 contiguous errored STS or STM frame alignment words.
C32 lpSonetSectFailures	1.3.6.1.4.1.562.2.4.1.12.14.17.1.8	Counter32	read-only	This attribute indicates the total number of times that a section failure (LOS or LOF failure) has been declared.
C32 lpSonetSectLosSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.6	Counter32	read-only	This attribute indicates the total number of Section LOS Seconds (SLOSSs) that have been counted. A SLOSS is declared for second intervals containing one or more LOS defects.
C32 lpSonetSectSevErroredFrmSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.7	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Frame Seconds (SSEFSs) that have been counted. A SSEFS is declared for second intervals containing one or more SEF defects.
C32 lpSonetSectSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.5	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Seconds (SSESs) that have been counted. A SSES is declared for second intervals containing more than x SCVs or one or more LOS or SEF defects. The value of x is 155 for a 155 Mbits/sec interface.
INT lpSonetSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.14.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpSonetStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.14.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
lpSonetStateEntry	1.3.6.1.4.1.562.2.4.1.12.14.15.1		not-accessible	An entry in the lpSonetStateTable.
lpSonetStateTable	1.3.6.1.4.1.562.2.4.1.12.14.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpSonetStatsEntry	1.3.6.1.4.1.562.2.4.1.12.14.17.1		not-accessible	An entry in the lpSonetStatsTable.
lpSonetStatsTable	1.3.6.1.4.1.562.2.4.1.12.14.17		not-accessible	This group contains the statistics data for a Sonet or Sdh component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO lpSonetStorageType	1.3.6.1.4.1.562.2.4.1.12.14.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSonet tables.
lpSonetTest	1.3.6.1.4.1.562.2.4.1.12.14.3
INT lpSonetTestAdminState	1.3.6.1.4.1.562.2.4.1.12.14.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR lpSonetTestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpSonetTestBitsRx	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpSonetTestBitsTx	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpSonetTestBytesRx	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpSonetTestBytesTx	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT lpSonetTestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
STR lpSonetTestComponentName	1.3.6.1.4.1.562.2.4.1.12.14.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX lpSonetTestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpSonetTestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpSonetTestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpSonetTestDuration	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 lpSonetTestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM lpSonetTestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
INT lpSonetTestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM lpSonetTestFrmRx	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 lpSonetTestFrmSize	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM lpSonetTestFrmTx	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON lpSonetTestIndex	1.3.6.1.4.1.562.2.4.1.12.14.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpSonetTest tables.
INT lpSonetTestOperationalState	1.3.6.1.4.1.562.2.4.1.12.14.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR lpSonetTestPurpose	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
lpSonetTestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1		not-accessible	An entry in the lpSonetTestResultsTable.
lpSonetTestResultsTable	1.3.6.1.4.1.562.2.4.1.12.14.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW lpSonetTestRowStatus	1.3.6.1.4.1.562.2.4.1.12.14.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpSonetTest components. These components cannot be added nor deleted.
lpSonetTestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.14.3.1.1		not-accessible	A single entry in the table represents a single lpSonetTest component.
lpSonetTestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.14.3.1		not-accessible	This entry controls the addition and deletion of lpSonetTest components.
lpSonetTestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1		not-accessible	An entry in the lpSonetTestSetupTable.
lpSonetTestSetupTable	1.3.6.1.4.1.562.2.4.1.12.14.3.11		not-accessible	This group contains all of the operational data for a Test component.
lpSonetTestStateEntry	1.3.6.1.4.1.562.2.4.1.12.14.3.10.1		not-accessible	An entry in the lpSonetTestStateTable.
lpSonetTestStateTable	1.3.6.1.4.1.562.2.4.1.12.14.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO lpSonetTestStorageType	1.3.6.1.4.1.562.2.4.1.12.14.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSonetTest tables.
U32 lpSonetTestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpSonetTestType	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpSonetTestUsageState	1.3.6.1.4.1.562.2.4.1.12.14.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpSonetTxAis	1.3.6.1.4.1.562.2.4.1.12.14.16.1.5	INTEGER	read-only	This attribute displays whether the Line Alarm Indication Signal (L- AIS) signal is being transmitted on the outgoing line. This signal is transmitted when the Sonet/Sdh is locked and left offline.
INT lpSonetTxRdi	1.3.6.1.4.1.562.2.4.1.12.14.16.1.6	INTEGER	read-only	This attribute displays whether the Line Remote Defect Indicator (L-RDI) signal is being transmitted over the OC-3 line. The L-RDI signal is transmitted upon the detection of the LOS, LOF or L-AIS defect. This attribute is always set to off when the component has been locked and left offline.
INT lpSonetUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.14.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpSonetUnusableTxClockRefAlarm	1.3.6.1.4.1.562.2.4.1.12.14.16.1.7	INTEGER	read-only	This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is entered when a Sonet/Sdh port provisioned to act as a transmit clock reference has received the code 'do not use for synchronization' in the S1 byte (in the SONET/ SDH line overhead) for 2.5 +/- 0.5 seconds. The condition is cleared after not detecting the 'do not use for synchronization' code for a period of 10 +/- 0.5 seconds or when the port is no longer provisioned to act as a transmit clock reference. A port is acting as a transmit clock reference if it is provisioned with a) a clockingSource of line, or b) it has been provisioned as a primaryReference, secondaryReference or tertiaryReference in the NetworkSynchronization component. The unusableTxClockRefAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSonetUsageState	1.3.6.1.4.1.562.2.4.1.12.14.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR lpSonetVendor	1.3.6.1.4.1.562.2.4.1.12.14.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
LIN lpSpareCard	1.3.6.1.4.1.562.2.4.1.12.100.1.2	Link	read-write	This is the spare processor card on which this LP should be assigned.
INT lpSpareCardStatus	1.3.6.1.4.1.562.2.4.1.12.103.1.3	INTEGER	read-only	This attribute specifies the status of this LP's spare card. The following values have been defined: notProvisioned No spare card has been provisioned notAvailable The spare card is not available alreadyInUse The spare card is already in use by another LP available The spare card is available (running as standby) active The spare card is running as active
INT lpStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.102.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
lpStateEntry	1.3.6.1.4.1.562.2.4.1.12.102.1		not-accessible	An entry in the lpStateTable.
lpStateTable	1.3.6.1.4.1.562.2.4.1.12.102		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
STO lpStorageType	1.3.6.1.4.1.562.2.4.1.12.1.1.4	StorageType	read-only	This variable represents the storage type value for the lp tables.
U32 lpTimeInterval	1.3.6.1.4.1.562.2.4.1.12.104.1.1	Unsigned32	read-only	This attribute indicates the time period (in minutes) for which the average, minimum and maximum utilization values are calculated. This attribute is reset to 0 every 15 minutes.
INT lpUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.102.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpUsageState	1.3.6.1.4.1.562.2.4.1.12.102.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
lpUtilEntry	1.3.6.1.4.1.562.2.4.1.12.104.1		not-accessible	An entry in the lpUtilTable.
lpUtilTable	1.3.6.1.4.1.562.2.4.1.12.104		not-accessible	This group contains the operational attributes that specify the processor's utilization levels. When this group exists for an LP component, the attributes are representative of the active card.
lpV35	1.3.6.1.4.1.562.2.4.1.12.9
INT lpV35ActualLinkMode	1.3.6.1.4.1.562.2.4.1.12.9.16.1.1	INTEGER	read-only	This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The interface behaves as a DCE or DTE according to the actualLinkMode.
G32 lpV35ActualRxLineSpeed	1.3.6.1.4.1.562.2.4.1.12.9.16.1.4	Gauge32	read-only	This attribute is the measured speed of the receive clock.
G32 lpV35ActualTxLineSpeed	1.3.6.1.4.1.562.2.4.1.12.9.16.1.3	Gauge32	read-only	This attribute is the measured speed of the transmit clock.
lpV35AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.9.12.1		not-accessible	An entry in the lpV35AdminInfoTable.
lpV35AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.9.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT lpV35AdminState	1.3.6.1.4.1.562.2.4.1.12.9.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpV35AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.9.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN lpV35ApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.9.10.1.8	Link	read-write	This attribute contains the component name of a Framer which is associated with the V35 component.
OCT lpV35AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.9.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
lpV35CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.9.11.1		not-accessible	An entry in the lpV35CidDataTable.
lpV35CidDataTable	1.3.6.1.4.1.562.2.4.1.12.9.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
INT lpV35ClockingSource	1.3.6.1.4.1.562.2.4.1.12.9.10.1.6	INTEGER	read-write	This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the attribute is local, the outgoing clocks are synchronized to a local oscillator on the FP. If the value of the attribute is module, the outgoing clocks are synchronized to the oscillator on the active CP.
STR lpV35CommentText	1.3.6.1.4.1.562.2.4.1.12.9.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpV35ComponentName	1.3.6.1.4.1.562.2.4.1.12.9.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT lpV35ControlStatus	1.3.6.1.4.1.562.2.4.1.12.9.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 lpV35CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.9.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OCT lpV35DataTransferLineState	1.3.6.1.4.1.562.2.4.1.12.9.10.1.3	OCTET STRING	read-write	This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
C32 lpV35DataXferStateChanges	1.3.6.1.4.1.562.2.4.1.12.9.16.1.5	Counter32	read-only	This attribute contains the number of times that the line has entered or exited the data transfer state.
INT lpV35DteDataClockSource	1.3.6.1.4.1.562.2.4.1.12.9.10.1.7	INTEGER	read-write	This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. A DTE interface uses TSET(DCE) and RSET(DCE) for timing. If the value of the attribute is fromDce, the DCE uses the internally generated transmit clock to supply both TSET(DCE) and RSET(DCE). If the value of the attribute is fromDte, the DCE still uses the internally generated transmit clock to supply TSET(DCE), but the receive timing is derived from TSET(DTE) on the link. The fromDte mode is recommended when the DTE is far away from the DCE interface. Note that TSET(DTE) is CCITT V.24 circuit 113; TSET(DCE) is CCITT V.24 circuit 114; and RSET(DCE) is CCITT V.24 circuit 115.
INT lpV35EnableDynamicSpeed	1.3.6.1.4.1.562.2.4.1.12.9.10.1.9	INTEGER	read-write	When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This attribute can be set to yes only if the linkMode is dce and the dteDataClockSource is fromDte.
INT lpV35IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.9.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
lpV35IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.9.13.1		not-accessible	An entry in the lpV35IfEntryTable.
lpV35IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.9.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM lpV35IfIndex	1.3.6.1.4.1.562.2.4.1.12.9.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 lpV35Index	1.3.6.1.4.1.562.2.4.1.12.9.1.1.10	Integer32	not-accessible	This variable represents the index for the lpV35 tables.
U32 lpV35LineSpeed	1.3.6.1.4.1.562.2.4.1.12.9.10.1.5	Unsigned32	read-write	This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. The clock rate is rounded up to the nearest available value. Note that the actual clock rates are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed. The actual lineSpeeds configurable on a V.35 DCE interface are: 3840000, 2560000, 2048000, 1920000, 1536000, 1344000, 1280000, 1024000, 960000, 768000, 672000, 640000, 512000, 448000, 384000, 336000, 320000, 256000, 224000, 192000, 168000, 128000, 112000, 64000, 56000, 48000, 32000, 19200, 9600. Note that linspeeds of 1024000 and 2048000 cannot be provisioned on cards that have ports provisioned at 3840000, 2560000, 1920000, 1280000, 960000, 640000 or 320000.
OCT lpV35LineState	1.3.6.1.4.1.562.2.4.1.12.9.16.1.2	OCTET STRING	read-only	This attribute contains the current state of the interface signals. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
U32 lpV35LineStatusTimeOut	1.3.6.1.4.1.562.2.4.1.12.9.10.1.4	Unsigned32	read-write	This attribute defines the time that the line state must be stable (good or bad) before a line state change is declared.
INT lpV35LinkMode	1.3.6.1.4.1.562.2.4.1.12.9.10.1.1	INTEGER	read-write	This attribute defines the intended gender of the V.35 interface. The actual gender of the interface is determined by the physical connection to the patch panel. If the hardware setup does not match this attribute, an alarm will be generated. In dte mode, the RTS line signal is driven as specified by the attribute readyLineState when the interface passes its initial diagnostics. Then, the RTS line signal will be driven as specified in the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signals (RFS, DSR, and DCD) are compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified input line states are observed. In dce mode, the V35 component behaves similarly as when it is in dte mode. However, it will be driving the DCE line signals (RFS, DSR, and DCD) and monitoring the DTE line signal (RTS) as specified by the attributes readyLineState and dataTransferLineState.
INT lpV35OperationalState	1.3.6.1.4.1.562.2.4.1.12.9.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
lpV35OperEntry	1.3.6.1.4.1.562.2.4.1.12.9.16.1		not-accessible	An entry in the lpV35OperTable.
lpV35OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.9.14.1		not-accessible	An entry in the lpV35OperStatusTable.
lpV35OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.9.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpV35OperTable	1.3.6.1.4.1.562.2.4.1.12.9.16		not-accessible	This group contains all specific operational data for a V35 component.
OCT lpV35ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.9.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
lpV35ProvEntry	1.3.6.1.4.1.562.2.4.1.12.9.10.1		not-accessible	An entry in the lpV35ProvTable.
lpV35ProvTable	1.3.6.1.4.1.562.2.4.1.12.9.10		not-accessible	This group contains all specific provisioning data for a V35 component.
OCT lpV35ReadyLineState	1.3.6.1.4.1.562.2.4.1.12.9.10.1.2	OCTET STRING	read-write	This attribute specifies the line signals originating from the V.35 interface that will always be turned on, provided the interface passes its diagnostics. This set of signals is generally required for maintaining the connection. Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. See also linkMode. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
ROW lpV35RowStatus	1.3.6.1.4.1.562.2.4.1.12.9.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpV35 components. These components can be added and deleted.
lpV35RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.9.1.1		not-accessible	A single entry in the table represents a single lpV35 component.
lpV35RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.9.1		not-accessible	This entry controls the addition and deletion of lpV35 components.
INT lpV35SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.9.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpV35StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.9.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
lpV35StateEntry	1.3.6.1.4.1.562.2.4.1.12.9.15.1		not-accessible	An entry in the lpV35StateTable.
lpV35StateTable	1.3.6.1.4.1.562.2.4.1.12.9.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
STO lpV35StorageType	1.3.6.1.4.1.562.2.4.1.12.9.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpV35 tables.
lpV35Test	1.3.6.1.4.1.562.2.4.1.12.9.2
INT lpV35TestAdminState	1.3.6.1.4.1.562.2.4.1.12.9.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR lpV35TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpV35TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpV35TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpV35TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpV35TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT lpV35TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
STR lpV35TestComponentName	1.3.6.1.4.1.562.2.4.1.12.9.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX lpV35TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpV35TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpV35TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpV35TestDuration	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 lpV35TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM lpV35TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
INT lpV35TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM lpV35TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 lpV35TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM lpV35TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON lpV35TestIndex	1.3.6.1.4.1.562.2.4.1.12.9.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpV35Test tables.
INT lpV35TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.9.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR lpV35TestPurpose	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
lpV35TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1		not-accessible	An entry in the lpV35TestResultsTable.
lpV35TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.9.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW lpV35TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.9.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpV35Test components. These components cannot be added nor deleted.
lpV35TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.9.2.1.1		not-accessible	A single entry in the table represents a single lpV35Test component.
lpV35TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.9.2.1		not-accessible	This entry controls the addition and deletion of lpV35Test components.
lpV35TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1		not-accessible	An entry in the lpV35TestSetupTable.
lpV35TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.9.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpV35TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.9.2.10.1		not-accessible	An entry in the lpV35TestStateTable.
lpV35TestStateTable	1.3.6.1.4.1.562.2.4.1.12.9.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO lpV35TestStorageType	1.3.6.1.4.1.562.2.4.1.12.9.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpV35Test tables.
U32 lpV35TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpV35TestType	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpV35TestUsageState	1.3.6.1.4.1.562.2.4.1.12.9.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpV35UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.9.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpV35UsageState	1.3.6.1.4.1.562.2.4.1.12.9.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR lpV35Vendor	1.3.6.1.4.1.562.2.4.1.12.9.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
lpX21	1.3.6.1.4.1.562.2.4.1.12.10
INT lpX21ActualLinkMode	1.3.6.1.4.1.562.2.4.1.12.10.16.1.1	INTEGER	read-only	This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The interface behaves as a DCE or DTE according to the actualLinkMode.
G32 lpX21ActualRxLineSpeed	1.3.6.1.4.1.562.2.4.1.12.10.16.1.4	Gauge32	read-only	This attribute is the measured speed of the receive clock.
G32 lpX21ActualTxLineSpeed	1.3.6.1.4.1.562.2.4.1.12.10.16.1.3	Gauge32	read-only	This attribute is the measured speed of the transmit clock.
lpX21AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.10.12.1		not-accessible	An entry in the lpX21AdminInfoTable.
lpX21AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.10.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT lpX21AdminState	1.3.6.1.4.1.562.2.4.1.12.10.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpX21AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.10.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN lpX21ApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.10.10.1.9	Link	read-write	This attribute contains the component name of a Framer which is associated with the X21 component.
OCT lpX21AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.10.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
lpX21CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.10.11.1		not-accessible	An entry in the lpX21CidDataTable.
lpX21CidDataTable	1.3.6.1.4.1.562.2.4.1.12.10.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
INT lpX21ClockingSource	1.3.6.1.4.1.562.2.4.1.12.10.10.1.6	INTEGER	read-write	This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the attribute is local, the outgoing clocks are synchronized to a local oscillator on the FP. If the value of the attribute is module, the outgoing clocks are synchronized to the oscillator on the active CP.
STR lpX21CommentText	1.3.6.1.4.1.562.2.4.1.12.10.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpX21ComponentName	1.3.6.1.4.1.562.2.4.1.12.10.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT lpX21ControlStatus	1.3.6.1.4.1.562.2.4.1.12.10.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 lpX21CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.10.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OCT lpX21DataTransferLineState	1.3.6.1.4.1.562.2.4.1.12.10.10.1.3	OCTET STRING	read-write	The state of the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: indication(0) control(1)
C32 lpX21DataXferStateChanges	1.3.6.1.4.1.562.2.4.1.12.10.16.1.5	Counter32	read-only	This attribute contains the number of times that the line has entered or exited the data transfer state.
INT lpX21DteDataClockSource	1.3.6.1.4.1.562.2.4.1.12.10.10.1.7	INTEGER	read-write	This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. Note that a V.11 DTE interface uses the S clock (see X.21 standard) for both receive data and transmit data timing. The DTE interface always loops the received S clock back to the DCE as the X clock (see X.21 standard). If the value of the attribute is fromDce, the DCE V.11 interface uses the internally generated transmit clock as the S clock and for both receive and transmit data timing. The X clock is ignored. If the value of the attribute is fromDte, the DCE still uses the internally generated transmit clock as the S clock and for transmit data timing, but the receive data timing is derived from the X clock. The fromDte mode is recommended when the DTE is far away from the DCE interface.
INT lpX21EnableDynamicSpeed	1.3.6.1.4.1.562.2.4.1.12.10.10.1.10	INTEGER	read-write	When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This attribute can be set to yes only if the linkMode is dce and the dteDataClockSource is fromDte..
INT lpX21IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.10.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
lpX21IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.10.13.1		not-accessible	An entry in the lpX21IfEntryTable.
lpX21IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.10.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM lpX21IfIndex	1.3.6.1.4.1.562.2.4.1.12.10.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 lpX21Index	1.3.6.1.4.1.562.2.4.1.12.10.1.1.10	Integer32	not-accessible	This variable represents the index for the lpX21 tables.
U32 lpX21LineSpeed	1.3.6.1.4.1.562.2.4.1.12.10.10.1.5	Unsigned32	read-write	This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. The clock rate is rounded up to the nearest available value. Note that the actual clock rates are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed. The actual lineSpeeds configurable on a V.11 DCE interface are: 7680000, 3840000, 2560000, 2048000, 1920000, 1536000, 1344000, 1280000, 1024000, 960000, 768000, 672000, 640000, 512000, 448000, 384000, 336000, 320000, 256000, 224000, 192000, 168000, 128000, 112000, 64000, 56000, 48000, 32000, 19200, 9600. Note that linspeeds of 1024000 and 2048000 cannot be provisioned on cards that have ports provisioned at 3840000, 2560000, 1920000, 1280000, 960000, 640000 or 320000. DESCRIPTION
OCT lpX21LineState	1.3.6.1.4.1.562.2.4.1.12.10.16.1.2	OCTET STRING	read-only	This attribute contains the current state of the interface signals. Description of bits: indication(0) control(1)
U32 lpX21LineStatusTimeOut	1.3.6.1.4.1.562.2.4.1.12.10.10.1.4	Unsigned32	read-write	This attribute defines the time the line state must be stable (good or bad) before a state change is declared.
INT lpX21LineTerminationRequired	1.3.6.1.4.1.562.2.4.1.12.10.10.1.8	INTEGER	read-write	This attribute specifies whether termination is required for this interface. If the hardware setup does not match this attribute, an alarm will be generated.
INT lpX21LinkMode	1.3.6.1.4.1.562.2.4.1.12.10.10.1.1	INTEGER	read-write	This attribute defines the intended gender of the X21 component (V.11 interface). The actual gender of the interface is determined by the physical connection to the patch panel. If the hardware setup does not match this attribute, an alarm will be generated. In dte mode, the control line signal is driven as specified by the attribute readyLineState when the interface passes its initial diagnostics. Then, the control line signal will be driven as specified in the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signal (indication) is compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified line states are observed. In dce mode, the X21 component behaves similarly as when it is in dte mode. However, it will be driving the DCE line signal (control) and monitoring the DTE line signal (indication) as specified by the attributes readyLineState and dataTransferLineState.
INT lpX21OperationalState	1.3.6.1.4.1.562.2.4.1.12.10.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
lpX21OperEntry	1.3.6.1.4.1.562.2.4.1.12.10.16.1		not-accessible	An entry in the lpX21OperTable.
lpX21OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.10.14.1		not-accessible	An entry in the lpX21OperStatusTable.
lpX21OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.10.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpX21OperTable	1.3.6.1.4.1.562.2.4.1.12.10.16		not-accessible	This group contains all specific operational data for an X21 component.
OCT lpX21ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.10.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
lpX21ProvEntry	1.3.6.1.4.1.562.2.4.1.12.10.10.1		not-accessible	An entry in the lpX21ProvTable.
lpX21ProvTable	1.3.6.1.4.1.562.2.4.1.12.10.10		not-accessible	This group contains all specific provisioning data for an X21 component.
OCT lpX21ReadyLineState	1.3.6.1.4.1.562.2.4.1.12.10.10.1.2	OCTET STRING	read-write	This attribute specifies the line signals originating from the V.11 interface that will always be turned on, provided the interface passes its diagnostics. This set of signals is generally required to maintain the connection. Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. See also linkMode. Description of bits: indication(0) control(1)
ROW lpX21RowStatus	1.3.6.1.4.1.562.2.4.1.12.10.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpX21 components. These components can be added and deleted.
lpX21RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.10.1.1		not-accessible	A single entry in the table represents a single lpX21 component.
lpX21RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.10.1		not-accessible	This entry controls the addition and deletion of lpX21 components.
INT lpX21SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.10.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpX21StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.10.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
lpX21StateEntry	1.3.6.1.4.1.562.2.4.1.12.10.15.1		not-accessible	An entry in the lpX21StateTable.
lpX21StateTable	1.3.6.1.4.1.562.2.4.1.12.10.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
STO lpX21StorageType	1.3.6.1.4.1.562.2.4.1.12.10.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpX21 tables.
lpX21Test	1.3.6.1.4.1.562.2.4.1.12.10.2
INT lpX21TestAdminState	1.3.6.1.4.1.562.2.4.1.12.10.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR lpX21TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpX21TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpX21TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpX21TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpX21TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT lpX21TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
STR lpX21TestComponentName	1.3.6.1.4.1.562.2.4.1.12.10.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX lpX21TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpX21TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpX21TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpX21TestDuration	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 lpX21TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM lpX21TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
INT lpX21TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM lpX21TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 lpX21TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM lpX21TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON lpX21TestIndex	1.3.6.1.4.1.562.2.4.1.12.10.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpX21Test tables.
INT lpX21TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.10.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR lpX21TestPurpose	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
lpX21TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1		not-accessible	An entry in the lpX21TestResultsTable.
lpX21TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.10.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW lpX21TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.10.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpX21Test components. These components cannot be added nor deleted.
lpX21TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.10.2.1.1		not-accessible	A single entry in the table represents a single lpX21Test component.
lpX21TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.10.2.1		not-accessible	This entry controls the addition and deletion of lpX21Test components.
lpX21TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1		not-accessible	An entry in the lpX21TestSetupTable.
lpX21TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.10.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpX21TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.10.2.10.1		not-accessible	An entry in the lpX21TestStateTable.
lpX21TestStateTable	1.3.6.1.4.1.562.2.4.1.12.10.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO lpX21TestStorageType	1.3.6.1.4.1.562.2.4.1.12.10.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpX21Test tables.
U32 lpX21TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpX21TestType	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpX21TestUsageState	1.3.6.1.4.1.562.2.4.1.12.10.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpX21UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.10.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpX21UsageState	1.3.6.1.4.1.562.2.4.1.12.10.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR lpX21Vendor	1.3.6.1.4.1.562.2.4.1.12.10.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.

OID symbolic	OID numeric	Type	Access	Description
lp	1.3.6.1.4.1.562.2.4.1.12
lpRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.1		not-accessible	This entry controls the addition and deletion of lp components.
lpRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.1.1		not-accessible	A single entry in the table represents a single lp component.
ROW lpRowStatus	1.3.6.1.4.1.562.2.4.1.12.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lp components. These components can be added and deleted.
STR lpComponentName	1.3.6.1.4.1.562.2.4.1.12.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpStorageType	1.3.6.1.4.1.562.2.4.1.12.1.1.4	StorageType	read-only	This variable represents the storage type value for the lp tables.
I32 lpIndex	1.3.6.1.4.1.562.2.4.1.12.1.1.10	Integer32	not-accessible	This variable represents the index for the lp tables.
lpDS3	1.3.6.1.4.1.562.2.4.1.12.5
lpDS3RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.1		not-accessible	This entry controls the addition and deletion of lpDS3 components.
lpDS3RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.1.1		not-accessible	A single entry in the table represents a single lpDS3 component.
ROW lpDS3RowStatus	1.3.6.1.4.1.562.2.4.1.12.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS3 components. These components can be added and deleted.
STR lpDS3ComponentName	1.3.6.1.4.1.562.2.4.1.12.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpDS3StorageType	1.3.6.1.4.1.562.2.4.1.12.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3 tables.
I32 lpDS3Index	1.3.6.1.4.1.562.2.4.1.12.5.1.1.10	Integer32	not-accessible	This variable represents the index for the lpDS3 tables.
lpDS3Test	1.3.6.1.4.1.562.2.4.1.12.5.2
lpDS3TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.2.1		not-accessible	This entry controls the addition and deletion of lpDS3Test components.
lpDS3TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.2.1.1		not-accessible	A single entry in the table represents a single lpDS3Test component.
ROW lpDS3TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS3Test components. These components cannot be added nor deleted.
STR lpDS3TestComponentName	1.3.6.1.4.1.562.2.4.1.12.5.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpDS3TestStorageType	1.3.6.1.4.1.562.2.4.1.12.5.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3Test tables.
NON lpDS3TestIndex	1.3.6.1.4.1.562.2.4.1.12.5.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3Test tables.
lpDS3TestStateTable	1.3.6.1.4.1.562.2.4.1.12.5.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpDS3TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.5.2.10.1		not-accessible	An entry in the lpDS3TestStateTable.
INT lpDS3TestAdminState	1.3.6.1.4.1.562.2.4.1.12.5.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpDS3TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.5.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpDS3TestUsageState	1.3.6.1.4.1.562.2.4.1.12.5.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
lpDS3TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.5.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpDS3TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1		not-accessible	An entry in the lpDS3TestSetupTable.
STR lpDS3TestPurpose	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT lpDS3TestType	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 lpDS3TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT lpDS3TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX lpDS3TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpDS3TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpDS3TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpDS3TestDuration	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
lpDS3TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.5.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpDS3TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1		not-accessible	An entry in the lpDS3TestResultsTable.
C32 lpDS3TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 lpDS3TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpDS3TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
NUM lpDS3TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpDS3TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpDS3TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpDS3TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpDS3TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS3TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS3TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpDS3TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
lpDS3CBit	1.3.6.1.4.1.562.2.4.1.12.5.3
lpDS3CBitRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.3.1		not-accessible	This entry controls the addition and deletion of lpDS3CBit components.
lpDS3CBitRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.3.1.1		not-accessible	A single entry in the table represents a single lpDS3CBit component.
ROW lpDS3CBitRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS3CBit components. These components cannot be added nor deleted.
STR lpDS3CBitComponentName	1.3.6.1.4.1.562.2.4.1.12.5.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpDS3CBitStorageType	1.3.6.1.4.1.562.2.4.1.12.5.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3CBit tables.
NON lpDS3CBitIndex	1.3.6.1.4.1.562.2.4.1.12.5.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3CBit tables.
lpDS3CBitOperationalTable	1.3.6.1.4.1.562.2.4.1.12.5.3.10		not-accessible	This group contains the DS3 C-Bit Parity operational data for the CBIT component.
lpDS3CBitOperationalEntry	1.3.6.1.4.1.562.2.4.1.12.5.3.10.1		not-accessible	An entry in the lpDS3CBitOperationalTable.
INT lpDS3CBitFarEndAlarm	1.3.6.1.4.1.562.2.4.1.12.5.3.10.1.1	INTEGER	read-only	This attribute indicates the Far-End alarm signal that is currently received at the DS3 interface. This signal is carried over the Far- End Alarm and Control (FEAC) bits of DS3 frames. Five far-end alarm signals can be received: far-end equipment failure that is received when the far-end terminal has detected a local equipment failure; far-end Loss Of Signal (LOS) that is received when the far- end DS3 terminal has declared a LOS failure condition; far-end Loss of Frame (LOF) when the far-end DS3 terminal has declared a Loss Of Frame (LOF) failure condition; far-end Alarm Indication Signal (AIS) when the far-end has declared an AIS failure condition; far-end Idle when the far-end has declared an Idle signal condition.
OCT lpDS3CBitLoopedbackToFarEnd	1.3.6.1.4.1.562.2.4.1.12.5.3.10.1.2	OCTET STRING	read-only	This indicates whether or not the DS3 component is currently looping back the incoming DS3 signal or one of its DS1 tributaries to the far-end DS3 terminal. This is activated when the far-end DS3 equipment has ordered the local terminal to do so. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) notused29(29) notused30(30) ds3Line(31)
OCT lpDS3CBitLoopbackAtFarEndRequested	1.3.6.1.4.1.562.2.4.1.12.5.3.10.1.3	OCTET STRING	read-only	This attribute indicates which DS1 tributaries are being looped back, or if the DS3 line is being looped back. Each value listed indicates a loopback request has been made. When a loopback deactivation command has been sent to the far end, the corresponding value will be removed from the list. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) notused29(29) notused30(30) ds3Line(31)
lpDS3CBitStatsTable	1.3.6.1.4.1.562.2.4.1.12.5.3.11		not-accessible	This group contains the DS3 C-Bit Parity statistical data for the CBIT component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpDS3CBitStatsEntry	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1		not-accessible	An entry in the lpDS3CBitStatsTable.
C32 lpDS3CBitCbitErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.1	Counter32	read-only	This attribute indicates the number of seconds that the DS3 port has not suffered any C-Bit errors.
C32 lpDS3CBitCbitCodeViolations	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.2	Counter32	read-only	This attribute indicates the total count of C-Bit Parity Code Violations (CCV). A CCV is obtained when the parity calculated over the previous DS3 frame and the value of the CP-bits appearing in the current DS3 frame differ. The value of this attribute will wrap around to 0 if it does reach its maximum value. CCV counting is inhibited for second intervals where C-Bit Parity Severely Errored Seconds (CSES) are counted. It is also inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3CBitCbitErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.3	Counter32	read-only	This attribute indicates the total number of C-Bit Parity Errored Seconds (CES). A CES second is declared for second intervals containing one or more CCVs or when one or more SEF (Severely Errored Frame) or AIS (Alarm Indication Signal) defects. CES counting is inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted.
C32 lpDS3CBitCbitSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.4	Counter32	read-only	This attribute indicates the total number of C-Bit Parity Severely Errored Seconds (CSES). A CSES is declared for second intervals containing more than 44 CCVs or one or more SEF or AIS defects. The occurrence of CSES in a one second interval causes the inhibition of CCV counting during that second interval. CSES counting is also inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted.
C32 lpDS3CBitCbitUnavailSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.5	Counter32	read-only	This attribute indicates the total number of one second intervals for which the DS3 path is unavailable. The DS3 path becomes unavailable at the onset of 10 consecutive C-Bit Severely Errored Seconds (CSES). The 10 CSESs are included in the unavailable time. Once unavailable, the DS3 path becomes available at the onset of 10 contiguous seconds with no CSES. The 10 seconds with no CSES are excluded from the unavailable time. For second intervals where CUAS is counted, counting of C-Bit Coding Violations (CCV), C-Bit Errored Seconds (CES) and C-Bit Severely Errored Seconds (CSES) is inhibited.
C32 lpDS3CBitFarEndErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.6	Counter32	read-only	This attribute indicates the number of seconds that the DS3 port has not suffered of any far-end errors.
C32 lpDS3CBitFarEndCodeViolations	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.7	Counter32	read-only	This attribute indicates the total count of DS3 frames containing a Coding Violation on the Far-End (FECV), also known as a Far-End Block Error (FEBE). Each FEBE is reported over the FEBE bits each time the far-end DS3 terminal detects a C-BIT Parity error over a received DS3 frame. For second intervals where Far-End Unavailable Seconds (FEAUS) or Far-End Severely Errored Seconds (FESES) are counted, counting of FECVs is inhibited. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3CBitFarEndErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.8	Counter32	read-only	This attribute indicates the total number of Far-End Errored Seconds (FEES). A FEES is declared for second intervals containing with one or more FECVs or one or more far-end SEF/ AIS defects. A far-end SEF/AIS defect occurs when the X-Bits of the DS3 frame are received as being set to zero. For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FEESs is inhibited.
C32 lpDS3CBitFarEndSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.9	Counter32	read-only	This attribute indicates the total number of Far-End Severely Errored Seconds (FESES). A FESES is declared for second intervals containing more than 44 FECVs or one or more far-end SEF/AIS defects. For second intervals where a FESES is counted, counting of FECVs is inhibited. For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FESESs is inhibited.
C32 lpDS3CBitFarEndSefAisSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.10	Counter32	read-only	This attribute indicates the total number of Far-End SEF/AIS Seconds (FESAS). A FESAS is declared for second intervals containing one or more far-end SEF/AIS defects.For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FESASs is inhibited.
C32 lpDS3CBitFarEndUnavailSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.11	Counter32	read-only	This attribute indicates the total number of one second intervals for which the DS3 far-end path is unavailable. The DS3 far-end path becomes unavailable at the onset of 10 consecutive Far-End Severely Errored Seconds (FESES). The 10 FESESs are included in the unavailable time. Once unavailable, the DS3 far-end path becomes available at the onset of 10 contiguous seconds with no FESES. The 10 seconds with no FESES are excluded from the unavailable time. For second intervals where FEUAS is counted, counting of Far-End Coding Violations (FECV), Far-End Errored Seconds (FEES), Far-End Severely Errored Seconds (FESES) and Far-End Sef/Ais Seconds (FESAS) is inhibited.
C32 lpDS3CBitFarEndFailures	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.12	Counter32	read-only	This attribute indicates the total number of times that a far-end path failure (i.e. a Far-End SEF/AIS defect) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpDS3Plcp	1.3.6.1.4.1.562.2.4.1.12.5.4
lpDS3PlcpRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.4.1		not-accessible	This entry controls the addition and deletion of lpDS3Plcp components.
lpDS3PlcpRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.4.1.1		not-accessible	A single entry in the table represents a single lpDS3Plcp component.
ROW lpDS3PlcpRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS3Plcp components. These components cannot be added nor deleted.
STR lpDS3PlcpComponentName	1.3.6.1.4.1.562.2.4.1.12.5.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpDS3PlcpStorageType	1.3.6.1.4.1.562.2.4.1.12.5.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3Plcp tables.
NON lpDS3PlcpIndex	1.3.6.1.4.1.562.2.4.1.12.5.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3Plcp tables.
lpDS3PlcpOperationalTable	1.3.6.1.4.1.562.2.4.1.12.5.4.10		not-accessible	This group contains the operational data for the PLCP component.
lpDS3PlcpOperationalEntry	1.3.6.1.4.1.562.2.4.1.12.5.4.10.1		not-accessible	An entry in the lpDS3PlcpOperationalTable.
INT lpDS3PlcpLofAlarm	1.3.6.1.4.1.562.2.4.1.12.5.4.10.1.1	INTEGER	read-only	This attribute displays whether a PLCP Loss Of Frame (LOF) failure alarm state has been entered. An LOF failure is declared when a PLCP LOF defect persists for 2.5 s +/- 0.5 s. An LOF defect occurs when an OOF (Out of Frame) state persists for more than 1 ms. If the OOF events are intermittent, the LOF defect counter is decremented at a rate of 1/12 (for DS3 PLCP) or 1/9 (for G.751 E3 PLCP) of the incrementing rate, with all measurements based on a 200 ms polling cycle. An OOF event (also known as a PLCP SEF event) is declared when an error is detected in both the A1 and A2 octets, or when two consecutive POHIDs are found in error. OOF is removed when two valid sets of framing octets and two valid and sequential POHID octets have been found. The LOF defect is removed when the defect counter reaches zero, i.e. when OOF events are absent for more than 12 ms (DS3 PLCP) or 9 ms (G.751 E3 PLCP). LOF failure alarm is cleared when LOF defect is absent for 10.0 s +/- 0.5 s The DS3 or E3 component goes into an operational state of disabled until the LOF failure alarm is cleared. The terminal declaring the LOF failure alarm will transmit a PLCP RAI signal to the far-end for the duration of the alarm. The lofAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
INT lpDS3PlcpRxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.5.4.10.1.2	INTEGER	read-only	This attribute displays whether a PLCP Remote Alarm Indication (RAI) failure alarm state has been entered. An RAI failure alarm occurs when ten consecutive PLCP RAI bits (bit 5 in the G1 byte) are high on the incoming line. An RAI failure alarm is cleared when ten consecutive RAI bits are set to 0. Note: Some standards call this alarm RFI. The rxRaiAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
lpDS3PlcpStatsTable	1.3.6.1.4.1.562.2.4.1.12.5.4.11		not-accessible	This group contains the statistical data for the PLCP component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpDS3PlcpStatsEntry	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1		not-accessible	An entry in the lpDS3PlcpStatsTable.
C32 lpDS3PlcpErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.1	Counter32	read-only	This attribute indicates the number of seconds during which the near-end PLCP path layer had no errors.
C32 lpDS3PlcpCodingViolations	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.2	Counter32	read-only	This attribute indicates the total number of BIP-8 Errors, framing pattern octet errors, and path overhead identification errors detected in received PLCP frames. Counting of PLCP CV is inhibited for second intervals where PLCP Severely Errored Framing Seconds (SEFS) or PLCP Unavailable Seconds (UAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3PlcpErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.3	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Coding Violations (CV) or in which a PLCP Severely Errored Framing Second (SEFS) was counted. Counting of PLCP ES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 lpDS3PlcpSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.4	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF event occurred). Counting of PLCP SES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 lpDS3PlcpSevErroredFramingSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.5	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Severely Errored Frame (SEF) events. An SEF event is equivalent to a PLCP OOF (Out of Frame) event. Counting of PLCPP SEFSs is inhibited for second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 lpDS3PlcpUnavailSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.6	Counter32	read-only	This attribute indicates the number of seconds when the near-end PLCP layer is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP LOF (Loss of Frame) failure alarm state. The PLCP Path Layer becomes available again only after clearing this condition. For second intervals where PLCP UAS are counted, counting of PLCP Severely Errored Framing Seconds (SEFS), PLCP Coding Violations (CV), PLCP Errored Seconds (ES), PLCP Severely Errored Seconds (SES) and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
C32 lpDS3PlcpFarEndErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.7	Counter32	read-only	This attribute indicates the number of seconds during which the far- end PLCP path layer had no errors.
C32 lpDS3PlcpFarEndCodingViolations	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.8	Counter32	read-only	This attribute indicates the total number of PLCP Far-End Block Errors (FEBE) reported by the far-end terminal. Counting of FEBEs is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3PlcpFarEndErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.9	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FEES is inhibited during second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 lpDS3PlcpFarEndSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.10	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FESES is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 lpDS3PlcpFarEndUnavailableSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.11	Counter32	read-only	This attribute indicates the number of seconds during which the PLCP far end is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP RAI (Remote Alarm Indication). Service becomes available again after this condition is cleared. For second intervals where PLCP FEUAS are counted, counting of PLCP Far-End Coding Violations (FECV), PLCP Far- End Errored Seconds (FEES), and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
lpDS3Cell	1.3.6.1.4.1.562.2.4.1.12.5.5
lpDS3CellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.5.1		not-accessible	This entry controls the addition and deletion of lpDS3Cell components.
lpDS3CellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.5.1.1		not-accessible	A single entry in the table represents a single lpDS3Cell component.
ROW lpDS3CellRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS3Cell components. These components can be added and deleted.
STR lpDS3CellComponentName	1.3.6.1.4.1.562.2.4.1.12.5.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpDS3CellStorageType	1.3.6.1.4.1.562.2.4.1.12.5.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3Cell tables.
NON lpDS3CellIndex	1.3.6.1.4.1.562.2.4.1.12.5.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3Cell tables.
lpDS3CellProvTable	1.3.6.1.4.1.562.2.4.1.12.5.5.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
lpDS3CellProvEntry	1.3.6.1.4.1.562.2.4.1.12.5.5.10.1		not-accessible	An entry in the lpDS3CellProvTable.
U32 lpDS3CellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.5.5.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
INT lpDS3CellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.5.5.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT lpDS3CellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.5.5.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
lpDS3CellOperTable	1.3.6.1.4.1.562.2.4.1.12.5.5.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpDS3CellOperEntry	1.3.6.1.4.1.562.2.4.1.12.5.5.11.1		not-accessible	An entry in the lpDS3CellOperTable.
INT lpDS3CellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.5.5.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
lpDS3CellStatsTable	1.3.6.1.4.1.562.2.4.1.12.5.5.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpDS3CellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.5.5.12.1		not-accessible	An entry in the lpDS3CellStatsTable.
C32 lpDS3CellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 lpDS3CellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
G32 lpDS3CellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpDS3CellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 lpDS3CellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
lpDS3DS1	1.3.6.1.4.1.562.2.4.1.12.5.6
lpDS3DS1RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.1		not-accessible	This entry controls the addition and deletion of lpDS3DS1 components.
lpDS3DS1RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.1.1		not-accessible	A single entry in the table represents a single lpDS3DS1 component.
ROW lpDS3DS1RowStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS3DS1 components. These components can be added and deleted.
STR lpDS3DS1ComponentName	1.3.6.1.4.1.562.2.4.1.12.5.6.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpDS3DS1StorageType	1.3.6.1.4.1.562.2.4.1.12.5.6.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3DS1 tables.
I32 lpDS3DS1Index	1.3.6.1.4.1.562.2.4.1.12.5.6.1.1.10	Integer32	not-accessible	This variable represents the index for the lpDS3DS1 tables.
lpDS3DS1Chan	1.3.6.1.4.1.562.2.4.1.12.5.6.2
lpDS3DS1ChanRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.1		not-accessible	This entry controls the addition and deletion of lpDS3DS1Chan components.
lpDS3DS1ChanRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1		not-accessible	A single entry in the table represents a single lpDS3DS1Chan component.
ROW lpDS3DS1ChanRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS3DS1Chan components. These components can be added and deleted.
STR lpDS3DS1ChanComponentName	1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpDS3DS1ChanStorageType	1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3DS1Chan tables.
I32 lpDS3DS1ChanIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1.10	Integer32	not-accessible	This variable represents the index for the lpDS3DS1Chan tables.
lpDS3DS1ChanTest	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2
lpDS3DS1ChanTestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1		not-accessible	This entry controls the addition and deletion of lpDS3DS1ChanTest components.
lpDS3DS1ChanTestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1		not-accessible	A single entry in the table represents a single lpDS3DS1ChanTest component.
ROW lpDS3DS1ChanTestRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS3DS1ChanTest components. These components cannot be added nor deleted.
STR lpDS3DS1ChanTestComponentName	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpDS3DS1ChanTestStorageType	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3DS1ChanTest tables.
NON lpDS3DS1ChanTestIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3DS1ChanTest tables.
lpDS3DS1ChanTestStateTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpDS3DS1ChanTestStateEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10.1		not-accessible	An entry in the lpDS3DS1ChanTestStateTable.
INT lpDS3DS1ChanTestAdminState	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpDS3DS1ChanTestOperationalState	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpDS3DS1ChanTestUsageState	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
lpDS3DS1ChanTestSetupTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpDS3DS1ChanTestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1		not-accessible	An entry in the lpDS3DS1ChanTestSetupTable.
STR lpDS3DS1ChanTestPurpose	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT lpDS3DS1ChanTestType	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 lpDS3DS1ChanTestFrmSize	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT lpDS3DS1ChanTestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX lpDS3DS1ChanTestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpDS3DS1ChanTestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpDS3DS1ChanTestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpDS3DS1ChanTestDuration	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
lpDS3DS1ChanTestResultsTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpDS3DS1ChanTestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1		not-accessible	An entry in the lpDS3DS1ChanTestResultsTable.
C32 lpDS3DS1ChanTestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 lpDS3DS1ChanTestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpDS3DS1ChanTestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
NUM lpDS3DS1ChanTestBitsTx	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpDS3DS1ChanTestBytesTx	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpDS3DS1ChanTestFrmTx	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpDS3DS1ChanTestBitsRx	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpDS3DS1ChanTestBytesRx	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS3DS1ChanTestFrmRx	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS3DS1ChanTestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpDS3DS1ChanTestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
lpDS3DS1ChanCell	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3
lpDS3DS1ChanCellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1		not-accessible	This entry controls the addition and deletion of lpDS3DS1ChanCell components.
lpDS3DS1ChanCellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1		not-accessible	A single entry in the table represents a single lpDS3DS1ChanCell component.
ROW lpDS3DS1ChanCellRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS3DS1ChanCell components. These components can be added and deleted.
STR lpDS3DS1ChanCellComponentName	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpDS3DS1ChanCellStorageType	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3DS1ChanCell tables.
NON lpDS3DS1ChanCellIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3DS1ChanCell tables.
lpDS3DS1ChanCellProvTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
lpDS3DS1ChanCellProvEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10.1		not-accessible	An entry in the lpDS3DS1ChanCellProvTable.
U32 lpDS3DS1ChanCellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
INT lpDS3DS1ChanCellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT lpDS3DS1ChanCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
lpDS3DS1ChanCellOperTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpDS3DS1ChanCellOperEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.11.1		not-accessible	An entry in the lpDS3DS1ChanCellOperTable.
INT lpDS3DS1ChanCellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
lpDS3DS1ChanCellStatsTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpDS3DS1ChanCellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1		not-accessible	An entry in the lpDS3DS1ChanCellStatsTable.
C32 lpDS3DS1ChanCellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 lpDS3DS1ChanCellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
G32 lpDS3DS1ChanCellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpDS3DS1ChanCellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 lpDS3DS1ChanCellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
lpDS3DS1ChanTc	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4
lpDS3DS1ChanTcRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1		not-accessible	This entry controls the addition and deletion of lpDS3DS1ChanTc components.
lpDS3DS1ChanTcRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1		not-accessible	A single entry in the table represents a single lpDS3DS1ChanTc component.
ROW lpDS3DS1ChanTcRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS3DS1ChanTc components. These components can be added and deleted.
STR lpDS3DS1ChanTcComponentName	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpDS3DS1ChanTcStorageType	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3DS1ChanTc tables.
NON lpDS3DS1ChanTcIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3DS1ChanTc tables.
lpDS3DS1ChanTcProvTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.10		not-accessible	This group contains all specific provisioning data for a Tc component.
lpDS3DS1ChanTcProvEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.10.1		not-accessible	An entry in the lpDS3DS1ChanTcProvTable.
HEX lpDS3DS1ChanTcReplacementData	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.10.1.1	Hex	read-write	This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
U32 lpDS3DS1ChanTcSignalOneDuration	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.10.1.2	Unsigned32	read-write	This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
lpDS3DS1ChanTcOpTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.11		not-accessible	This group contains all specific operational data for a Tc component.
lpDS3DS1ChanTcOpEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.11.1		not-accessible	An entry in the lpDS3DS1ChanTcOpTable.
INT lpDS3DS1ChanTcIngressConditioning	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.11.1.1	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
INT lpDS3DS1ChanTcEgressConditioning	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.11.1.2	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
lpDS3DS1ChanTcSigOneTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.398		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
lpDS3DS1ChanTcSigOneEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.398.1		not-accessible	An entry in the lpDS3DS1ChanTcSigOneTable.
INT lpDS3DS1ChanTcSigOneIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.398.1.1	INTEGER	not-accessible	This variable represents the lpDS3DS1ChanTcSigOneTable specific index for the lpDS3DS1ChanTcSigOneTable.
U32 lpDS3DS1ChanTcSigOneValue	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.398.1.2	Unsigned32	read-write	This variable represents an individual value for the lpDS3DS1ChanTcSigOneTable.
lpDS3DS1ChanTcSigTwoTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.399		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
lpDS3DS1ChanTcSigTwoEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.399.1		not-accessible	An entry in the lpDS3DS1ChanTcSigTwoTable.
INT lpDS3DS1ChanTcSigTwoIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.399.1.1	INTEGER	not-accessible	This variable represents the lpDS3DS1ChanTcSigTwoTable specific index for the lpDS3DS1ChanTcSigTwoTable.
U32 lpDS3DS1ChanTcSigTwoValue	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.399.1.2	Unsigned32	read-write	This variable represents an individual value for the lpDS3DS1ChanTcSigTwoTable.
lpDS3DS1ChanProvTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.10		not-accessible	This group contains all of the provisional data for a Channel component.
lpDS3DS1ChanProvEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.10.1		not-accessible	An entry in the lpDS3DS1ChanProvTable.
OCT lpDS3DS1ChanTimeslots	1.3.6.1.4.1.562.2.4.1.12.5.6.2.10.1.1	OCTET STRING	read-write	This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
INT lpDS3DS1ChanTimeslotDataRate	1.3.6.1.4.1.562.2.4.1.12.5.6.2.10.1.2	INTEGER	read-write	This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependent on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56kbit/s is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
LIN lpDS3DS1ChanApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.5.6.2.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
lpDS3DS1ChanCidDataTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpDS3DS1ChanCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.11.1		not-accessible	An entry in the lpDS3DS1ChanCidDataTable.
U32 lpDS3DS1ChanCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.5.6.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
lpDS3DS1ChanIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpDS3DS1ChanIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.12.1		not-accessible	An entry in the lpDS3DS1ChanIfEntryTable.
INT lpDS3DS1ChanIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM lpDS3DS1ChanIfIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.2.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
lpDS3DS1ChanOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpDS3DS1ChanOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.13.1		not-accessible	An entry in the lpDS3DS1ChanOperStatusTable.
INT lpDS3DS1ChanSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
lpDS3DS1ChanStateTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpDS3DS1ChanStateEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1		not-accessible	An entry in the lpDS3DS1ChanStateTable.
INT lpDS3DS1ChanAdminState	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS3DS1ChanOperationalState	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS3DS1ChanUsageState	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpDS3DS1ChanAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpDS3DS1ChanProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpDS3DS1ChanControlStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpDS3DS1ChanAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT lpDS3DS1ChanStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpDS3DS1ChanUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
lpDS3DS1ChanOperTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.15		not-accessible	This group contains all of the operational data for a Channel component.
lpDS3DS1ChanOperEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.15.1		not-accessible	An entry in the lpDS3DS1ChanOperTable.
G32 lpDS3DS1ChanActualChannelSpeed	1.3.6.1.4.1.562.2.4.1.12.5.6.2.15.1.1	Gauge32	read-only	This attribute displays the measured link speed of the Channel component.
lpDS3DS1ChanAdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.16		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpDS3DS1ChanAdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.16.1		not-accessible	An entry in the lpDS3DS1ChanAdminInfoTable.
STR lpDS3DS1ChanVendor	1.3.6.1.4.1.562.2.4.1.12.5.6.2.16.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpDS3DS1ChanCommentText	1.3.6.1.4.1.562.2.4.1.12.5.6.2.16.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
lpDS3DS1Test	1.3.6.1.4.1.562.2.4.1.12.5.6.3
lpDS3DS1TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.3.1		not-accessible	This entry controls the addition and deletion of lpDS3DS1Test components.
lpDS3DS1TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1		not-accessible	A single entry in the table represents a single lpDS3DS1Test component.
ROW lpDS3DS1TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS3DS1Test components. These components cannot be added nor deleted.
STR lpDS3DS1TestComponentName	1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpDS3DS1TestStorageType	1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3DS1Test tables.
NON lpDS3DS1TestIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3DS1Test tables.
lpDS3DS1TestStateTable	1.3.6.1.4.1.562.2.4.1.12.5.6.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpDS3DS1TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.3.10.1		not-accessible	An entry in the lpDS3DS1TestStateTable.
INT lpDS3DS1TestAdminState	1.3.6.1.4.1.562.2.4.1.12.5.6.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpDS3DS1TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.5.6.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpDS3DS1TestUsageState	1.3.6.1.4.1.562.2.4.1.12.5.6.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
lpDS3DS1TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11		not-accessible	This group contains all of the operational data for a Test component.
lpDS3DS1TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1		not-accessible	An entry in the lpDS3DS1TestSetupTable.
STR lpDS3DS1TestPurpose	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT lpDS3DS1TestType	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 lpDS3DS1TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT lpDS3DS1TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX lpDS3DS1TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpDS3DS1TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpDS3DS1TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpDS3DS1TestDuration	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
lpDS3DS1TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpDS3DS1TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1		not-accessible	An entry in the lpDS3DS1TestResultsTable.
C32 lpDS3DS1TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 lpDS3DS1TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpDS3DS1TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
NUM lpDS3DS1TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpDS3DS1TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpDS3DS1TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpDS3DS1TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpDS3DS1TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS3DS1TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS3DS1TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpDS3DS1TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
lpDS3DS1ProvTable	1.3.6.1.4.1.562.2.4.1.12.5.6.10		not-accessible	This group contains all of the provisioning data for a DS1 component.
lpDS3DS1ProvEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.10.1		not-accessible	An entry in the lpDS3DS1ProvTable.
INT lpDS3DS1LineType	1.3.6.1.4.1.562.2.4.1.12.5.6.10.1.1	INTEGER	read-write	This attribute defines the framing of the DS1 tributary. d4 defines a framing pattern of 12 frames per multiframe. esf defines a framing pattern of 24 frames per multiframe. d4Cas defines a framing pattern of 12 frames per multiframe with channel associated signalling. esfCas defines a framing pattern of 24 frames per multiframe with channel associated signalling.
INT lpDS3DS1ZeroCoding	1.3.6.1.4.1.562.2.4.1.12.5.6.10.1.2	INTEGER	read-write	This attribute defines the zero encoding on the DS1 tributary. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the available bandwidth of the channel by 1/8. none does no zero encoding.
INT lpDS3DS1ClockingSource	1.3.6.1.4.1.562.2.4.1.12.5.6.10.1.3	INTEGER	read-write	This attribute defines the source of the transmit clock for the DS1 tributary. When the clocking source is selected from local, the crystal on the port generates the clocking for the DS1 tributary. When the clocking source is selected from line, the port synchronizes to the clock from the DS1 tributary. When the clocking source is selected from module, the ports clock synchronizes to the clock provided by the oscillator on the active CP. On a 1pDS3C card, if the NetworkSynchronization (NS) component is present the default value of this attribute will be module otherwise it will be line. On a 2pDS3cAal card, the only valid values are local and module. If the NS component is present the default value of this attribute will be module otherwise it will be local.
lpDS3DS1CidDataTable	1.3.6.1.4.1.562.2.4.1.12.5.6.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpDS3DS1CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.11.1		not-accessible	An entry in the lpDS3DS1CidDataTable.
U32 lpDS3DS1CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.5.6.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
lpDS3DS1AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.5.6.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpDS3DS1AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.12.1		not-accessible	An entry in the lpDS3DS1AdminInfoTable.
STR lpDS3DS1Vendor	1.3.6.1.4.1.562.2.4.1.12.5.6.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpDS3DS1CommentText	1.3.6.1.4.1.562.2.4.1.12.5.6.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
lpDS3DS1IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.5.6.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpDS3DS1IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.13.1		not-accessible	An entry in the lpDS3DS1IfEntryTable.
INT lpDS3DS1IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM lpDS3DS1IfIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
lpDS3DS1OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpDS3DS1OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.14.1		not-accessible	An entry in the lpDS3DS1OperStatusTable.
INT lpDS3DS1SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
lpDS3DS1StateTable	1.3.6.1.4.1.562.2.4.1.12.5.6.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpDS3DS1StateEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1		not-accessible	An entry in the lpDS3DS1StateTable.
INT lpDS3DS1AdminState	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS3DS1OperationalState	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS3DS1UsageState	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpDS3DS1AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpDS3DS1ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpDS3DS1ControlStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpDS3DS1AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT lpDS3DS1StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpDS3DS1UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
lpDS3DS1OperTable	1.3.6.1.4.1.562.2.4.1.12.5.6.16		not-accessible	This group contains the common operational data for a component in a digital hierarchy interface.
lpDS3DS1OperEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.16.1		not-accessible	An entry in the lpDS3DS1OperTable.
INT lpDS3DS1RxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.1	INTEGER	read-only	This attribute indicates whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/- 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period. If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. This tributary goes into an operationalState of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
INT lpDS3DS1LofAlarm	1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.2	INTEGER	read-only	This attribute indicates whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (2 out of 5 framing bits in error ) have been detected for 3 seconds +/- 0.5 seconds. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. This tributary goes into an operationalState of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
INT lpDS3DS1RxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.3	INTEGER	read-only	This attribute indicates whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/ 10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds. The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
INT lpDS3DS1TxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.4	INTEGER	read-only	This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the tributary is in a locked state.
INT lpDS3DS1TxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.5	INTEGER	read-only	This attribute indicates whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the tributary detects a LOF alarm condition.
lpDS3DS1StatsTable	1.3.6.1.4.1.562.2.4.1.12.5.6.17		not-accessible	This group contains the common statistical data for a component in a digital hierarchy interface.
lpDS3DS1StatsEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1		not-accessible	An entry in the lpDS3DS1StatsTable.
C32 lpDS3DS1RunningTime	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.1	Counter32	read-only	This attribute counts the number of seconds since the tributary was activated.
C32 lpDS3DS1ErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.2	Counter32	read-only	This attribute counts the number of seconds that the tributary has been in an error free state.
C32 lpDS3DS1ErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.3	Counter32	read-only	This attribute counts the number of errored seconds the tributary has counted since it was activated. An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
C32 lpDS3DS1SevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.4	Counter32	read-only	This attribute counts the number of severely errored seconds the tributary has counted since it was activated. A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
C32 lpDS3DS1SevErroredFrmSec	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.5	Counter32	read-only	This attribute counts the number of severely errored framing seconds the tributary has counted since it was activated A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
C32 lpDS3DS1UnavailSec	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.6	Counter32	read-only	This attribute counts the total number of seconds that the tributary has been in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
C32 lpDS3DS1CrcErrors	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.7	Counter32	read-only	This attribute counts the total number of CRC-6 errors. These will only be counted when the lineType is esf.
C32 lpDS3DS1FrmErrors	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.8	Counter32	read-only	This attribute counts the total number of frame errors. A frame error is an error in the framing bits.
C32 lpDS3DS1SlipErrors	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.9	Counter32	read-only	The total number of times that the line experienced a controlled frame slip.
lpDS3ProvTable	1.3.6.1.4.1.562.2.4.1.12.5.10		not-accessible	This group contains all of the provisioning data for a DS3 component.
lpDS3ProvEntry	1.3.6.1.4.1.562.2.4.1.12.5.10.1		not-accessible	An entry in the lpDS3ProvTable.
INT lpDS3CbitParity	1.3.6.1.4.1.562.2.4.1.12.5.10.1.1	INTEGER	read-write	This attribute indicates if C-Bit parity has been turned ON or OFF. The CBIT component will appear under the DS3 component when the cbitParity attribute is set to on.
U32 lpDS3LineLength	1.3.6.1.4.1.562.2.4.1.12.5.10.1.2	Unsigned32	read-write	This attribute defines the line length for equalization calculations for the DS3 line. The range is between 0 and 450 feet (1 metre = 3.28 feet). Note: There are currently only two ranges as far as the equalization calculation performed on the FP is concerned: 0 to 224ft and 225 to 450ft.
INT lpDS3ClockingSource	1.3.6.1.4.1.562.2.4.1.12.5.10.1.3	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the DS3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means use of a signal phase-locked to the incoming DS3 line rate; module means the use of a signal phase-locked to the CP reference clock. Note that the multiport cell-based cards have one common clock source for all ports. For this reason, the following rules apply for the value of clockingSource across the board's three ports: All three clockingSource values must be 'local' OR All three clockingSource values must be 'module' OR One clockingSource value must be 'line' and the other two must be 'otherPort'. The there is no NS component provisioned, the default value for this attribute will be local. If the NS component has been provisioned, the default value is module, except for the 1pDS3C cards. For the 1pDS3C cards, the default and only valid value for this attribute is local. The clockingSource of the DS1 sub-component becomes the effective clocking source for this attribute. All the DS1 sub-components have the same clocking source.
LIN lpDS3ApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.5.10.1.4	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the DS3 component.
INT lpDS3Mapping	1.3.6.1.4.1.562.2.4.1.12.5.10.1.5	INTEGER	read-write	This attribute indicates if ATM cells will be mapped directly into the DS3 payload, or whether PLCP mapping will be used. The PLCP component will appear under the DS3 component when this attribute is set to plcp. This attribute will be ignored when set on frame-based cards.
lpDS3CidDataTable	1.3.6.1.4.1.562.2.4.1.12.5.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpDS3CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.5.11.1		not-accessible	An entry in the lpDS3CidDataTable.
U32 lpDS3CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.5.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
lpDS3AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.5.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpDS3AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.5.12.1		not-accessible	An entry in the lpDS3AdminInfoTable.
STR lpDS3Vendor	1.3.6.1.4.1.562.2.4.1.12.5.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpDS3CommentText	1.3.6.1.4.1.562.2.4.1.12.5.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
lpDS3IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.5.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpDS3IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.5.13.1		not-accessible	An entry in the lpDS3IfEntryTable.
INT lpDS3IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.5.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM lpDS3IfIndex	1.3.6.1.4.1.562.2.4.1.12.5.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
lpDS3OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpDS3OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.14.1		not-accessible	An entry in the lpDS3OperStatusTable.
INT lpDS3SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.5.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
lpDS3StateTable	1.3.6.1.4.1.562.2.4.1.12.5.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpDS3StateEntry	1.3.6.1.4.1.562.2.4.1.12.5.15.1		not-accessible	An entry in the lpDS3StateTable.
INT lpDS3AdminState	1.3.6.1.4.1.562.2.4.1.12.5.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS3OperationalState	1.3.6.1.4.1.562.2.4.1.12.5.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS3UsageState	1.3.6.1.4.1.562.2.4.1.12.5.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpDS3AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.5.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpDS3ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.5.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpDS3ControlStatus	1.3.6.1.4.1.562.2.4.1.12.5.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpDS3AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.5.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT lpDS3StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.5.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpDS3UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.5.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
lpDS3OperTable	1.3.6.1.4.1.562.2.4.1.12.5.16		not-accessible	This group contains the common operational data for DS3 component.
lpDS3OperEntry	1.3.6.1.4.1.562.2.4.1.12.5.16.1		not-accessible	An entry in the lpDS3OperTable.
INT lpDS3LosAlarm	1.3.6.1.4.1.562.2.4.1.12.5.16.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is detected at the DS3 line interface upon observing 175 +/- 75 continuous pulse positions with no pulses of either positive or negative polarity. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT lpDS3LofAlarm	1.3.6.1.4.1.562.2.4.1.12.5.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely Errored Frame (SEF) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. A SEF defect is detected when 3 (or more) out of 16 (or fewer) F-bits are in error, or one (or more) M-bits in two (or more) out of four (or fewer) consecutive M-frames are in error. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. As long as SEF defects are detected, the node also transmits the far-end SEF/AIS defect indicator over the outgoing line. When not running in C-Bit Parity mode, the txRai attribute is also set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT lpDS3RxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.5.16.1.3	INTEGER	read-only	This attribute displays whether an Alarm Indication Signal (AIS) alarm state has been entered. An AIS alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is the occurrence of AIS (valid DS3 frame with payload containing the 1010...sequence and with C-Bits set to zero) in contiguous M-frames for a time greater than 100 milliseconds. If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the AIS alarm condition is cleared (after AIS has been no longer detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS is detected, the node also transmits the far-end SEF/AIS defect indicator over the outgoing line. When not running in C-Bit Parity mode, the txRai attribute is also set to on when transmitting the far- end SEF/AIS defect indicator on the outgoing line. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT lpDS3RxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.5.16.1.4	INTEGER	read-only	This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. When not running the C-Bit Parity mode, the RAI alarm state is entered when the far-end SEF/AIS defect indicator has been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the incoming DS3 line. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the RAI alarm condition is cleared. The condition is cleared when the far-end SEF/AIS defect indicator has not been detected for 10 seconds +/- 0.5 seconds. When running the C-Bit Parity mode, the RAI alarm state is entered upon detection of a far-end alarm over the Far-End Alarm and Control (FEAC) channel. The RAI alarm state is exited as soon as no more far-end alarm is detected on the FEAC channel. The far- end alarms that can be detected on the FEAC channel and that cause the RAI alarm state to be entered are: equipment failure alarm (service affecting), LOS alarm, LOF alarm, idle and AIS alarm. The rxRaiAlarm attribute is always set to off when the component has been locked and left offline.
INT lpDS3RxIdle	1.3.6.1.4.1.562.2.4.1.12.5.16.1.5	INTEGER	read-only	This attribute displays whether an Idle failure condition has been reported on the DS3 port. An Idle condition is reported when DS3 Idle defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The DS3 Idle defect is the occurrence of a valid DS3 frame with the information bits set to a 11001100.. sequence. If the DS3 Idle defects are intermittently occurring, the DS3 Idle defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the Idle failure condition is cleared. The failure condition is cleared when the DS3 idle pattern has not been detected for at least 10 seconds +/- 0.5 seconds. The rxIdle attribute is always set to off when the component has been locked and left offline. The idle pattern indicates that the far-end is physically connected but not put in service. For instance, DS3 idle is transmitted on the outgoing line when the DS3 component is locked and not used for operational testing.
INT lpDS3TxAis	1.3.6.1.4.1.562.2.4.1.12.5.16.1.6	INTEGER	read-only	This attribute displays whether an Alarm Indication Signal (AIS) alarm is being transmitted on the DS3 line. Currently, AIS is never transmitted by a Passport DS3 node.
INT lpDS3TxRai	1.3.6.1.4.1.562.2.4.1.12.5.16.1.7	INTEGER	read-only	When not running C-Bit Parity mode, this attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the DS3 component has been unlocked or used in operational testing. When running in C-Bit Parity mode, this attribute displays whether a far-end alarm is sent over the Far-End Alarm and Control (FEAC) channel when the DS3 component has been unlocked or used in operational testing. When the DS3 component is locked and not used in operational testing, this attribute is always set to off.
INT lpDS3TxIdle	1.3.6.1.4.1.562.2.4.1.12.5.16.1.8	INTEGER	read-only	This attribute displays whether the DS3 Idle signal is transmitted over the outgoing line. DS3 Idle is sent when the DS3 component has been locked and not used in operational testing.
lpDS3StatsTable	1.3.6.1.4.1.562.2.4.1.12.5.17		not-accessible	This group contains the specific DS3 common operational data for a DS3 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpDS3StatsEntry	1.3.6.1.4.1.562.2.4.1.12.5.17.1		not-accessible	An entry in the lpDS3StatsTable.
C32 lpDS3RunningTime	1.3.6.1.4.1.562.2.4.1.12.5.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the DS3 component has been activated and been in unlocked state or used for operational testing. All the other error counts that follow as well as each DS3 subcomponent's error counts can be updated when this count is active.
C32 lpDS3ErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the DS3 port has been in an error free state.
C32 lpDS3LineCodeViolations	1.3.6.1.4.1.562.2.4.1.12.5.17.1.3	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCV) detected. A DS3 Line Code Violation is a B3Zs error. LCV counting is inhibited for second intervals where Line Severely Errored Second (LSES) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3LineErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.4	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LES) that have been counted. A LES is declared for second intervals containing one or more LCV or one or more Loss Of Signal (LOS) defects.
C32 lpDS3LineSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.5	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSES) that have been counted. A LSES is declared for second intervals containing more than 44 LCVs or one or more LOS defects.
C32 lpDS3LineLosSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.6	Counter32	read-only	This attribute indicates the total number of Line LOS Seconds (LOSS) that have been counted. A LOSS is declared for second intervals containing one or more LOS defects.
C32 lpDS3LineFailures	1.3.6.1.4.1.562.2.4.1.12.5.17.1.7	Counter32	read-only	This attribute indicates the total number of times that a line failure (LOS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3PathCodeViolations	1.3.6.1.4.1.562.2.4.1.12.5.17.1.8	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a P-bit parity error, or possibly a frame error or a disagreement between P-bits or X-bits. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3PathErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.9	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of Path Errored Seconds is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 lpDS3PathSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.10	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than 44 PCVs or one or more SEF or AIS defects. Counting of PSESs is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 lpDS3PathSefAisSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.11	Counter32	read-only	This attribute indicates the total number of SEF/AIS Seconds (PSASs). A PSAS is declared for second intervals containing one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSAS is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 lpDS3PathUnavailSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.12	Counter32	read-only	This attribute indicates the total number of one second intervals for which the DS3 path is unavailable. The DS3 path becomes unavailable at the onset of 10 consecutive Path Severely Errored Seconds (PSES). The 10 PSESs are included in the unavailable time. Once unavailable, the DS3 path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where PUAS is counted, counting of Path Coding Violations (PCV), Path Errored Seconds (PES), Path Severely Errored Seconds (PSES) and Path Sef/Ais Seconds (PSAS) is inhibited.
C32 lpDS3PathFailures	1.3.6.1.4.1.562.2.4.1.12.5.17.1.13	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOF/AIS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpE3	1.3.6.1.4.1.562.2.4.1.12.6
lpE3RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.6.1		not-accessible	This entry controls the addition and deletion of lpE3 components.
lpE3RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.6.1.1		not-accessible	A single entry in the table represents a single lpE3 component.
ROW lpE3RowStatus	1.3.6.1.4.1.562.2.4.1.12.6.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpE3 components. These components can be added and deleted.
STR lpE3ComponentName	1.3.6.1.4.1.562.2.4.1.12.6.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpE3StorageType	1.3.6.1.4.1.562.2.4.1.12.6.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE3 tables.
I32 lpE3Index	1.3.6.1.4.1.562.2.4.1.12.6.1.1.10	Integer32	not-accessible	This variable represents the index for the lpE3 tables.
lpE3Test	1.3.6.1.4.1.562.2.4.1.12.6.2
lpE3TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.6.2.1		not-accessible	This entry controls the addition and deletion of lpE3Test components.
lpE3TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.6.2.1.1		not-accessible	A single entry in the table represents a single lpE3Test component.
ROW lpE3TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.6.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpE3Test components. These components cannot be added nor deleted.
STR lpE3TestComponentName	1.3.6.1.4.1.562.2.4.1.12.6.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpE3TestStorageType	1.3.6.1.4.1.562.2.4.1.12.6.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE3Test tables.
NON lpE3TestIndex	1.3.6.1.4.1.562.2.4.1.12.6.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE3Test tables.
lpE3TestStateTable	1.3.6.1.4.1.562.2.4.1.12.6.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpE3TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.6.2.10.1		not-accessible	An entry in the lpE3TestStateTable.
INT lpE3TestAdminState	1.3.6.1.4.1.562.2.4.1.12.6.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpE3TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.6.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpE3TestUsageState	1.3.6.1.4.1.562.2.4.1.12.6.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
lpE3TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.6.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpE3TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1		not-accessible	An entry in the lpE3TestSetupTable.
STR lpE3TestPurpose	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT lpE3TestType	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 lpE3TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT lpE3TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX lpE3TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpE3TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpE3TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpE3TestDuration	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
lpE3TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.6.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpE3TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1		not-accessible	An entry in the lpE3TestResultsTable.
C32 lpE3TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 lpE3TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpE3TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
NUM lpE3TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpE3TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpE3TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpE3TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpE3TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpE3TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpE3TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpE3TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
lpE3G832	1.3.6.1.4.1.562.2.4.1.12.6.3
lpE3G832RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.6.3.1		not-accessible	This entry controls the addition and deletion of lpE3G832 components.
lpE3G832RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.6.3.1.1		not-accessible	A single entry in the table represents a single lpE3G832 component.
ROW lpE3G832RowStatus	1.3.6.1.4.1.562.2.4.1.12.6.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpE3G832 components. These components can be added and deleted.
STR lpE3G832ComponentName	1.3.6.1.4.1.562.2.4.1.12.6.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpE3G832StorageType	1.3.6.1.4.1.562.2.4.1.12.6.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE3G832 tables.
NON lpE3G832Index	1.3.6.1.4.1.562.2.4.1.12.6.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE3G832 tables.
lpE3G832ProvisionedTable	1.3.6.1.4.1.562.2.4.1.12.6.3.10		not-accessible	This group contains the provisionable data for the G832 component.
lpE3G832ProvisionedEntry	1.3.6.1.4.1.562.2.4.1.12.6.3.10.1		not-accessible	An entry in the lpE3G832ProvisionedTable.
STR lpE3G832TrailTraceTransmitted	1.3.6.1.4.1.562.2.4.1.12.6.3.10.1.1	AsciiString	read-write	This attribute indicates the E.164 address which is to be encoded in the trail access point identifier, which is transmitted using the Trail Trace (TR) field of the transmitted E3 Frame. Both the expected trail access point identifier and the transmitted trail access point identifier are provisionable attributes of the G832 component. The 16 byte Trail Trace frame is composed of one byte containing a frame start marker and a CRC-7 calculation over the previous frame, and 15 bytes for transporting an E.164 address. If less than the full 15 bytes are used, the address is padded with NULL characters.
STR lpE3G832TrailTraceExpected	1.3.6.1.4.1.562.2.4.1.12.6.3.10.1.2	AsciiString	read-write	This attribute indicates the E.164 address which is expected in the trail access point identifier, which is transmitted using the Trail Trace (TR) field of the transmitted E3 Frame. Both the expected trail access point identifier and the transmitted trail access point identifier are provisionable attributes of the G832 component. The 16 byte Trail Trace frame is composed of one byte containing a frame start marker and a CRC-7 calculation over the previous frame, and 15 bytes for transporting an E.164 address. If less than the full 15 bytes are used, the address is padded with NULL characters.
lpE3G832OperationalTable	1.3.6.1.4.1.562.2.4.1.12.6.3.11		not-accessible	This group contains the operational data for the G832 component.
lpE3G832OperationalEntry	1.3.6.1.4.1.562.2.4.1.12.6.3.11.1		not-accessible	An entry in the lpE3G832OperationalTable.
INT lpE3G832UnexpectedPayloadType	1.3.6.1.4.1.562.2.4.1.12.6.3.11.1.1	INTEGER	read-only	This attribute displays whether the Unexpected Payload Type (UPT) alarm state has been entered. The UPT alarm state is entered when UPT defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The UPT defect is reported when a received frame fails to agree with the expected Payload Type. If the UPT defects are intermittently occurring, the UPT defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle.. The UPT alarm is cleared when the Payload Type in the received frame agrees with the expected Payload Type for a period of 10 seconds +/- 0.5 seconds. The unexpectedPayloadType attribute is always set to off when the E3 component has been locked and left offline.
INT lpE3G832TrailTraceMismatch	1.3.6.1.4.1.562.2.4.1.12.6.3.11.1.2	INTEGER	read-only	This attribute displays whether the Trail Trace Mismatch (TTM) alarm state has been entered. The TTM alarm state is entered when TTM defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The TTM defect is reported when the trail access point identifier contained in the Trail Trace (TR) field in the received frame fails to agree with the expected identifier. If the TTM defects are intermittently occurring, the TTM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The TTM alarm is cleared when the trail access point identifier in the received frame agrees with the expected identifier for a period of 10 seconds +/- 0.5 seconds. The trailTraceMismatch attribute is always set to off when the E3 component has been locked and left offline. Both the expected trail access identifier and the transmitted trail access identifier are provisionable attributes of the G832 component.
INT lpE3G832TimingMarker	1.3.6.1.4.1.562.2.4.1.12.6.3.11.1.3	INTEGER	read-only	Indicates whether or not the timing source at the far-end node is traceable to a Primary Reference Clock. The timingMarker indication is controlled by the timing marker bit in the G832 MA byte. If the received timing marker bit is 1 for five consecutive frames, and five consecutive 0s are not received for two seconds, the timingMarker indication will be set to not traceable. If the received timing marker bit is 0 for five consecutive frames and five consecutive 1s are not received for two seconds, the timingMarker indication will be set to traceable.
STR lpE3G832TrailTraceReceived	1.3.6.1.4.1.562.2.4.1.12.6.3.11.1.4	AsciiString	read-only	This attribute indicates the 15 byte E.164 address which is currently being received in the trail trace (TR) field of the E3 G832 frame. If this attribute differs from the provisioned trailTraceTransmitted string a trail trace mismatch (TTM) defect is reported, possibly resulting in a TTM alarm, as described for operational attribute trailTraceMismatch.
lpE3G832StatsTable	1.3.6.1.4.1.562.2.4.1.12.6.3.12		not-accessible	This group contains the statistical data for the G832 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpE3G832StatsEntry	1.3.6.1.4.1.562.2.4.1.12.6.3.12.1		not-accessible	An entry in the lpE3G832StatsTable.
C32 lpE3G832FarEndErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.1	Counter32	read-only	This attribute indicates the number of seconds that the E3 line has not suffered any G832 errors.
C32 lpE3G832FarEndCodeViolations	1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.2	Counter32	read-only	A count of E3 frames containing a Far-End Block Error (FEBE). A FEBE is reported over the FEBE bit each time the far-end terminal detects a BIP-8 error in a received E3 frame. For second intervals where Far End Unavailable Seconds (FEUAS) or Far End Severely Errored Seconds (FESES) are counted, counting of FECVs is inhibited. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpE3G832FarEndErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.3	Counter32	read-only	This attribute indicates the total number of Far-End Errored Seconds (FEES). A FEES is declared for second intervals containing with one or more Far-End Coding Violations (FECV) or one or more Far-End Receive Failure (FERF) defects. A FERF defect occurs when the FERF bit in the received frame is set to one. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FEESs is inhibited.
C32 lpE3G832FarEndSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.4	Counter32	read-only	This attribute indicates the total number of Far-End Severely Errored Seconds (FESESs). A FESES is declared for second intervals containing more than 34 Far-End Coding Violations (FECV) or one or more Far-End Receive Failure (FERF) defects. For second intervals where a Far-End Severely Errored Seconds (FESES) is counted, counting of FECVs is inhibited. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FESESs is inhibited.
C32 lpE3G832FarEndSefAisSec	1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.5	Counter32	read-only	This attribute indicates the total number of Far-End SEF/AIS Seconds (FESAS). A FESAS is declared for second intervals containing one or more Far-End Receive Failure (FERF) defects. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FESAS is inhibited.
C32 lpE3G832FarEndUnavailSec	1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.6	Counter32	read-only	This attribute indicates the total number of one second intervals for which the E3 far-end path is unavailable. The E3 far-end path becomes unavailable at the onset of 10 consecutive Far End Severely Errored Seconds (FESES). It comes available at the onset of 10 contiguous seconds with no FESES. The unavailable time includes the initial 10 seconds to enter the unavailable state but not the 10 seconds to exit the state For second intervals where FEUAS is counted, counting of Far End Coding Violations (FECV), Far- End Errored Seconds (FEES), Far-End Severely Errored Seconds (FESES) and Far-End SefAis Seconds (FESAS) are inhibited.
lpE3Plcp	1.3.6.1.4.1.562.2.4.1.12.6.4
lpE3PlcpRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.6.4.1		not-accessible	This entry controls the addition and deletion of lpE3Plcp components.
lpE3PlcpRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.6.4.1.1		not-accessible	A single entry in the table represents a single lpE3Plcp component.
ROW lpE3PlcpRowStatus	1.3.6.1.4.1.562.2.4.1.12.6.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpE3Plcp components. These components cannot be added nor deleted.
STR lpE3PlcpComponentName	1.3.6.1.4.1.562.2.4.1.12.6.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpE3PlcpStorageType	1.3.6.1.4.1.562.2.4.1.12.6.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE3Plcp tables.
NON lpE3PlcpIndex	1.3.6.1.4.1.562.2.4.1.12.6.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE3Plcp tables.
lpE3PlcpOperationalTable	1.3.6.1.4.1.562.2.4.1.12.6.4.10		not-accessible	This group contains the operational data for the PLCP component.
lpE3PlcpOperationalEntry	1.3.6.1.4.1.562.2.4.1.12.6.4.10.1		not-accessible	An entry in the lpE3PlcpOperationalTable.
INT lpE3PlcpLofAlarm	1.3.6.1.4.1.562.2.4.1.12.6.4.10.1.1	INTEGER	read-only	This attribute displays whether a PLCP Loss Of Frame (LOF) failure alarm state has been entered. An LOF failure is declared when a PLCP LOF defect persists for 2.5 s +/- 0.5 s. An LOF defect occurs when an OOF (Out of Frame) state persists for more than 1 ms. If the OOF events are intermittent, the LOF defect counter is decremented at a rate of 1/12 (for DS3 PLCP) or 1/9 (for G.751 E3 PLCP) of the incrementing rate, with all measurements based on a 200 ms polling cycle. An OOF event (also known as a PLCP SEF event) is declared when an error is detected in both the A1 and A2 octets, or when two consecutive POHIDs are found in error. OOF is removed when two valid sets of framing octets and two valid and sequential POHID octets have been found. The LOF defect is removed when the defect counter reaches zero, i.e. when OOF events are absent for more than 12 ms (DS3 PLCP) or 9 ms (G.751 E3 PLCP). LOF failure alarm is cleared when LOF defect is absent for 10.0 s +/- 0.5 s The DS3 or E3 component goes into an operational state of disabled until the LOF failure alarm is cleared. The terminal declaring the LOF failure alarm will transmit a PLCP RAI signal to the far-end for the duration of the alarm. The lofAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
INT lpE3PlcpRxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.6.4.10.1.2	INTEGER	read-only	This attribute displays whether a PLCP Remote Alarm Indication (RAI) failure alarm state has been entered. An RAI failure alarm occurs when ten consecutive PLCP RAI bits (bit 5 in the G1 byte) are high on the incoming line. An RAI failure alarm is cleared when ten consecutive RAI bits are set to 0. Note: Some standards call this alarm RFI. The rxRaiAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
lpE3PlcpStatsTable	1.3.6.1.4.1.562.2.4.1.12.6.4.11		not-accessible	This group contains the statistical data for the PLCP component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpE3PlcpStatsEntry	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1		not-accessible	An entry in the lpE3PlcpStatsTable.
C32 lpE3PlcpErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.1	Counter32	read-only	This attribute indicates the number of seconds during which the near-end PLCP path layer had no errors.
C32 lpE3PlcpCodingViolations	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.2	Counter32	read-only	This attribute indicates the total number of BIP-8 Errors, framing pattern octet errors, and path overhead identification errors detected in received PLCP frames. Counting of PLCP CV is inhibited for second intervals where PLCP Severely Errored Framing Seconds (SEFS) or PLCP Unavailable Seconds (UAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpE3PlcpErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.3	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Coding Violations (CV) or in which a PLCP Severely Errored Framing Second (SEFS) was counted. Counting of PLCP ES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 lpE3PlcpSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.4	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF event occurred). Counting of PLCP SES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 lpE3PlcpSevErroredFramingSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.5	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Severely Errored Frame (SEF) events. An SEF event is equivalent to a PLCP OOF (Out of Frame) event. Counting of PLCPP SEFSs is inhibited for second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 lpE3PlcpUnavailSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.6	Counter32	read-only	This attribute indicates the number of seconds when the near-end PLCP layer is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP LOF (Loss of Frame) failure alarm state. The PLCP Path Layer becomes available again only after clearing this condition. For second intervals where PLCP UAS are counted, counting of PLCP Severely Errored Framing Seconds (SEFS), PLCP Coding Violations (CV), PLCP Errored Seconds (ES), PLCP Severely Errored Seconds (SES) and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
C32 lpE3PlcpFarEndErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.7	Counter32	read-only	This attribute indicates the number of seconds during which the far- end PLCP path layer had no errors.
C32 lpE3PlcpFarEndCodingViolations	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.8	Counter32	read-only	This attribute indicates the total number of PLCP Far-End Block Errors (FEBE) reported by the far-end terminal. Counting of FEBEs is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpE3PlcpFarEndErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.9	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FEES is inhibited during second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 lpE3PlcpFarEndSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.10	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FESES is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 lpE3PlcpFarEndUnavailableSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.11	Counter32	read-only	This attribute indicates the number of seconds during which the PLCP far end is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP RAI (Remote Alarm Indication). Service becomes available again after this condition is cleared. For second intervals where PLCP FEUAS are counted, counting of PLCP Far-End Coding Violations (FECV), PLCP Far- End Errored Seconds (FEES), and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
lpE3Cell	1.3.6.1.4.1.562.2.4.1.12.6.5
lpE3CellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.6.5.1		not-accessible	This entry controls the addition and deletion of lpE3Cell components.
lpE3CellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.6.5.1.1		not-accessible	A single entry in the table represents a single lpE3Cell component.
ROW lpE3CellRowStatus	1.3.6.1.4.1.562.2.4.1.12.6.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpE3Cell components. These components can be added and deleted.
STR lpE3CellComponentName	1.3.6.1.4.1.562.2.4.1.12.6.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpE3CellStorageType	1.3.6.1.4.1.562.2.4.1.12.6.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE3Cell tables.
NON lpE3CellIndex	1.3.6.1.4.1.562.2.4.1.12.6.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE3Cell tables.
lpE3CellProvTable	1.3.6.1.4.1.562.2.4.1.12.6.5.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
lpE3CellProvEntry	1.3.6.1.4.1.562.2.4.1.12.6.5.10.1		not-accessible	An entry in the lpE3CellProvTable.
U32 lpE3CellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.6.5.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
INT lpE3CellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.6.5.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT lpE3CellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.6.5.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
lpE3CellOperTable	1.3.6.1.4.1.562.2.4.1.12.6.5.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpE3CellOperEntry	1.3.6.1.4.1.562.2.4.1.12.6.5.11.1		not-accessible	An entry in the lpE3CellOperTable.
INT lpE3CellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.6.5.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
lpE3CellStatsTable	1.3.6.1.4.1.562.2.4.1.12.6.5.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpE3CellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.6.5.12.1		not-accessible	An entry in the lpE3CellStatsTable.
C32 lpE3CellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 lpE3CellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
G32 lpE3CellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpE3CellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 lpE3CellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
lpE3ProvTable	1.3.6.1.4.1.562.2.4.1.12.6.10		not-accessible	This group contains all of the provisioning data for a E3 component.
lpE3ProvEntry	1.3.6.1.4.1.562.2.4.1.12.6.10.1		not-accessible	An entry in the lpE3ProvTable.
U32 lpE3LineLength	1.3.6.1.4.1.562.2.4.1.12.6.10.1.1	Unsigned32	read-write	This attribute defines the line length for equalization calculations for the E3 line. The line length range is between 0 and 300 metres (1 metres = 3.28 feet).
INT lpE3ClockingSource	1.3.6.1.4.1.562.2.4.1.12.6.10.1.2	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the E3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means use of a signal phase-locked to the incoming E3 line rate; module means the use of a signal phase-locked to the CP reference clock. Note that the multiport cell-based cards have one common clock source for each of the three ports. For this reason, the following rules apply for the value of clockingSource across the board's three ports: All three clockingSource values must be 'local' OR All three clockingSource values must be 'module' OR One clockingSource value must be 'line' and the other two must be 'otherPort'. The default value for this attribute will be module if a CP clock is available, and local otherwise.
LIN lpE3ApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.6.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the E3 component.
INT lpE3Mapping	1.3.6.1.4.1.562.2.4.1.12.6.10.1.4	INTEGER	read-write	This attribute indicates if ATM cells will be mapped directly into the E3 payload, or whether PLCP mapping will be used. The PLCP component will appear under the E3 component when this attribute is set to plcp. This attribute will be ignored when set on frame- based cards.
INT lpE3Framing	1.3.6.1.4.1.562.2.4.1.12.6.10.1.5	INTEGER	read-write	This attribute indicates if the framing mode will be in accordance with the CCITT G.751 or G.832 specification. The G832 component will appear under the E3 component when this attribute is set to g832. This attribute may only be set on cell-based card types. Note also that this attribute may only be set to g751 if the mapping attribute is set to plcp. The default value of this attribute will be g751 for frame-based cards, and g832 for cell-based cards. Note: when E3 framing is changed from g832 to g751, the G832 component must be deleted.
U32 lpE3LinkAlarmActivationThreshold	1.3.6.1.4.1.562.2.4.1.12.6.10.1.6	Unsigned32	read-write	This attribute specifies the time interval between the detection of a sustained link failure and the activation of an alarm. It is provisionable for E3 cards.
U32 lpE3LinkAlarmScanInterval	1.3.6.1.4.1.562.2.4.1.12.6.10.1.7	Unsigned32	read-write	This attribute specifies the alarm scan timer polling interval. It determines how frequently the status of the link is monitored after a first link error interrupt. It is provisionable for E3 cards.
lpE3CidDataTable	1.3.6.1.4.1.562.2.4.1.12.6.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpE3CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.6.11.1		not-accessible	An entry in the lpE3CidDataTable.
U32 lpE3CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.6.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
lpE3AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.6.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpE3AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.6.12.1		not-accessible	An entry in the lpE3AdminInfoTable.
STR lpE3Vendor	1.3.6.1.4.1.562.2.4.1.12.6.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpE3CommentText	1.3.6.1.4.1.562.2.4.1.12.6.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
lpE3IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.6.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpE3IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.6.13.1		not-accessible	An entry in the lpE3IfEntryTable.
INT lpE3IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.6.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM lpE3IfIndex	1.3.6.1.4.1.562.2.4.1.12.6.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
lpE3OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.6.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpE3OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.6.14.1		not-accessible	An entry in the lpE3OperStatusTable.
INT lpE3SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.6.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
lpE3StateTable	1.3.6.1.4.1.562.2.4.1.12.6.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpE3StateEntry	1.3.6.1.4.1.562.2.4.1.12.6.15.1		not-accessible	An entry in the lpE3StateTable.
INT lpE3AdminState	1.3.6.1.4.1.562.2.4.1.12.6.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpE3OperationalState	1.3.6.1.4.1.562.2.4.1.12.6.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpE3UsageState	1.3.6.1.4.1.562.2.4.1.12.6.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpE3AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.6.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpE3ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.6.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpE3ControlStatus	1.3.6.1.4.1.562.2.4.1.12.6.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpE3AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.6.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT lpE3StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.6.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpE3UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.6.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
lpE3OperTable	1.3.6.1.4.1.562.2.4.1.12.6.16		not-accessible	This group contains the common operational data for E3 component.
lpE3OperEntry	1.3.6.1.4.1.562.2.4.1.12.6.16.1		not-accessible	An entry in the lpE3OperTable.
INT lpE3LosAlarm	1.3.6.1.4.1.562.2.4.1.12.6.16.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects has been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is detected at the E3 line interface upon observing N continuous pulse positions with no pulses of either positive or negative polarity, where N is between 10 and 255. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared when the LOS defects are absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT lpE3LofAlarm	1.3.6.1.4.1.562.2.4.1.12.6.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely Errored Frame (SEF) defects have been detected and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An E3 SEF defect is reported after detecting Frame Alignment Signal (FAS) errors on 4 consecutive E3 frames received on the incoming line. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when E3 framing has been achieved for a period of 10 seconds +/- 0.5 seconds. As long as SEF defects are detected, the node also transmits the far-end SEF/AIS (in G.751 E3) or FERF (in G.832) defect indicator over the outgoing line. The txRai attribute is set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT lpE3RxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.6.16.1.3	INTEGER	read-only	This attribute displays whether an Alarm Indication Signal (AIS) alarm when state has been entered. An AIS alarm state is entered when AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the incoming E3 line. An AIS defect is the occurrence of the AIS (unframed signal with a density of zeros below a certain threshold such as defined by ITU Recommendation G.775). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/ 10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the AIS alarm condition is cleared (after AIS has been no longer detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS is detected on the incoming line, the node also transmits the far-end SEF/AIS (in G.751 E3) or FERF (in G.832) defect indicator over the outgoing line. The txRai attribute is set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT lpE3RxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.6.16.1.4	INTEGER	read-only	This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. A RAI alarm state is entered when far- end SEF/AIS defects (or Far-End Receive Failure (FERF) defects in G.832 E3 Framing mode) have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the E3 incoming line. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the RAI alarm condition is cleared. The condition is cleared when the far-end defect indicator has not been detected for 10 seconds +/- 0.5 seconds. The declaration of a RAI Alarm is usually a signal that the far end facility is unable to gain synchronization. The rxRaiAlarm attribute is always set to off when the component has been locked and left offline.
INT lpE3TxAis	1.3.6.1.4.1.562.2.4.1.12.6.16.1.5	INTEGER	read-only	This attribute displays whether an AIS alarm is being transmitted on the E3 line. AIS is transmitted on the outgoing line when the E3 component is locked and not used for operational testing.
INT lpE3TxRai	1.3.6.1.4.1.562.2.4.1.12.6.16.1.6	INTEGER	read-only	This attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the E3 component has been unlocked or used in operational testing. When the E3 component is locked and not used in operational testing, this attribute is always set to off. The far-end SEF/AIS defect indicator is transmitted over the outgoing line when SEF/AIS defects are detected on the incoming line. In G.832 E3 Framing mode, the FERF bit is set to '1' to transmit the SEF/AIS defect indicator.
lpE3StatsTable	1.3.6.1.4.1.562.2.4.1.12.6.17		not-accessible	This group contains the common operational data for E3 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpE3StatsEntry	1.3.6.1.4.1.562.2.4.1.12.6.17.1		not-accessible	An entry in the lpE3StatsTable.
C32 lpE3RunningTime	1.3.6.1.4.1.562.2.4.1.12.6.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the E3 component has been activated and been in unlocked state or used for operational testing. All the other error counts that follow as well as each E3 subcomponent's error counts can be updated when this count is active.
C32 lpE3ErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the E3 port has been in an error free state.
C32 lpE3LineCodeViolations	1.3.6.1.4.1.562.2.4.1.12.6.17.1.3	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCV) detected. An E3 Line Code Violation is an HDB3 coded signal error. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpE3LineErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.4	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LES) that have been counted. A LES is declared for interval seconds containing one or more Line Code Violations (LCV) or one or more Loss Of Signal (LOS) defects.
C32 lpE3LineSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.5	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSES) that have been counted. A LSES is declared for second intervals containing more than 34 Line Code Violations (LCV) or one or more Loss of Signal (LOS) defects.
C32 lpE3LineLosSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.6	Counter32	read-only	This attribute indicates the total number of Line LOS Seconds (LOSS) that have been counted. A LOSS is declared for second intervals containing one or more Loss of Signal (LOS) defects.
C32 lpE3LineFailures	1.3.6.1.4.1.562.2.4.1.12.6.17.1.7	Counter32	read-only	This attribute indicates the total number of times that a line failure (LOS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpE3PathCodeViolations	1.3.6.1.4.1.562.2.4.1.12.6.17.1.8	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCV) detected. An E3 PCV is an error in the Frame Alignment (FA) signal, or, in G.832 Framing Mode, an error in the Frame Alignment signal or a BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpE3PathErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.9	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PES) that have been counted. A PES is declared for second intervals containing one or more Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of Path Errored Seconds is inhibited when a Path Unavailable Second (PUAS) is counted over the monitored second.
C32 lpE3PathSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.10	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSES) that have been counted. A PSES is declared for second intervals containing more than 22 (G.751 E3) or 34 (G.832 E3) Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSESs is inhibited when a Path Unavailable Second (PUAS) is counted over the monitored second.
C32 lpE3PathSefAisSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.11	Counter32	read-only	This attribute indicates the total number of Path SEF/AIS Seconds (PSAS). A PSAS is declared for second intervals containing one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSAS is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 lpE3PathUnavailSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.12	Counter32	read-only	This attribute indicates the total number of one second intervals for which the E3 path is unavailable. The E3 path becomes unavailable at the onset of 10 consecutive Path Severely Errored Seconds (PSES). The 10 PSESs are included in the unavailable time. Once unavailable, the E3 path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where PUAS is counted, counting of Path Code Violations (PCV), Path Errored Seconds (PES), Path Severely Errored Seconds (PSES) and Path SefAis Seconds (PSAS) is inhibited.
C32 lpE3PathFailures	1.3.6.1.4.1.562.2.4.1.12.6.17.1.13	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOF/AIS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpDS1	1.3.6.1.4.1.562.2.4.1.12.7
lpDS1RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.1		not-accessible	This entry controls the addition and deletion of lpDS1 components.
lpDS1RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.1.1		not-accessible	A single entry in the table represents a single lpDS1 component.
ROW lpDS1RowStatus	1.3.6.1.4.1.562.2.4.1.12.7.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS1 components. These components can be added and deleted.
STR lpDS1ComponentName	1.3.6.1.4.1.562.2.4.1.12.7.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpDS1StorageType	1.3.6.1.4.1.562.2.4.1.12.7.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1 tables.
I32 lpDS1Index	1.3.6.1.4.1.562.2.4.1.12.7.1.1.10	Integer32	not-accessible	This variable represents the index for the lpDS1 tables.
lpDS1Chan	1.3.6.1.4.1.562.2.4.1.12.7.2
lpDS1ChanRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.2.1		not-accessible	This entry controls the addition and deletion of lpDS1Chan components.
lpDS1ChanRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.1.1		not-accessible	A single entry in the table represents a single lpDS1Chan component.
ROW lpDS1ChanRowStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS1Chan components. These components can be added and deleted.
STR lpDS1ChanComponentName	1.3.6.1.4.1.562.2.4.1.12.7.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpDS1ChanStorageType	1.3.6.1.4.1.562.2.4.1.12.7.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1Chan tables.
I32 lpDS1ChanIndex	1.3.6.1.4.1.562.2.4.1.12.7.2.1.1.10	Integer32	not-accessible	This variable represents the index for the lpDS1Chan tables.
lpDS1ChanTest	1.3.6.1.4.1.562.2.4.1.12.7.2.2
lpDS1ChanTestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.2.2.1		not-accessible	This entry controls the addition and deletion of lpDS1ChanTest components.
lpDS1ChanTestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1		not-accessible	A single entry in the table represents a single lpDS1ChanTest component.
ROW lpDS1ChanTestRowStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS1ChanTest components. These components cannot be added nor deleted.
STR lpDS1ChanTestComponentName	1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpDS1ChanTestStorageType	1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1ChanTest tables.
NON lpDS1ChanTestIndex	1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS1ChanTest tables.
lpDS1ChanTestStateTable	1.3.6.1.4.1.562.2.4.1.12.7.2.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpDS1ChanTestStateEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.2.10.1		not-accessible	An entry in the lpDS1ChanTestStateTable.
INT lpDS1ChanTestAdminState	1.3.6.1.4.1.562.2.4.1.12.7.2.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpDS1ChanTestOperationalState	1.3.6.1.4.1.562.2.4.1.12.7.2.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpDS1ChanTestUsageState	1.3.6.1.4.1.562.2.4.1.12.7.2.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
lpDS1ChanTestSetupTable	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpDS1ChanTestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1		not-accessible	An entry in the lpDS1ChanTestSetupTable.
STR lpDS1ChanTestPurpose	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT lpDS1ChanTestType	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 lpDS1ChanTestFrmSize	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT lpDS1ChanTestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX lpDS1ChanTestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpDS1ChanTestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpDS1ChanTestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpDS1ChanTestDuration	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
lpDS1ChanTestResultsTable	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpDS1ChanTestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1		not-accessible	An entry in the lpDS1ChanTestResultsTable.
C32 lpDS1ChanTestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 lpDS1ChanTestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpDS1ChanTestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
NUM lpDS1ChanTestBitsTx	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpDS1ChanTestBytesTx	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpDS1ChanTestFrmTx	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpDS1ChanTestBitsRx	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpDS1ChanTestBytesRx	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS1ChanTestFrmRx	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS1ChanTestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpDS1ChanTestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
lpDS1ChanCell	1.3.6.1.4.1.562.2.4.1.12.7.2.3
lpDS1ChanCellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.2.3.1		not-accessible	This entry controls the addition and deletion of lpDS1ChanCell components.
lpDS1ChanCellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1		not-accessible	A single entry in the table represents a single lpDS1ChanCell component.
ROW lpDS1ChanCellRowStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS1ChanCell components. These components can be added and deleted.
STR lpDS1ChanCellComponentName	1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpDS1ChanCellStorageType	1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1ChanCell tables.
NON lpDS1ChanCellIndex	1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS1ChanCell tables.
lpDS1ChanCellProvTable	1.3.6.1.4.1.562.2.4.1.12.7.2.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
lpDS1ChanCellProvEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.3.10.1		not-accessible	An entry in the lpDS1ChanCellProvTable.
U32 lpDS1ChanCellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.7.2.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
INT lpDS1ChanCellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.7.2.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT lpDS1ChanCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.7.2.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
lpDS1ChanCellOperTable	1.3.6.1.4.1.562.2.4.1.12.7.2.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpDS1ChanCellOperEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.3.11.1		not-accessible	An entry in the lpDS1ChanCellOperTable.
INT lpDS1ChanCellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.7.2.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
lpDS1ChanCellStatsTable	1.3.6.1.4.1.562.2.4.1.12.7.2.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpDS1ChanCellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1		not-accessible	An entry in the lpDS1ChanCellStatsTable.
C32 lpDS1ChanCellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 lpDS1ChanCellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
G32 lpDS1ChanCellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpDS1ChanCellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 lpDS1ChanCellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
lpDS1ChanTc	1.3.6.1.4.1.562.2.4.1.12.7.2.4
lpDS1ChanTcRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.2.4.1		not-accessible	This entry controls the addition and deletion of lpDS1ChanTc components.
lpDS1ChanTcRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1		not-accessible	A single entry in the table represents a single lpDS1ChanTc component.
ROW lpDS1ChanTcRowStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS1ChanTc components. These components can be added and deleted.
STR lpDS1ChanTcComponentName	1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpDS1ChanTcStorageType	1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1ChanTc tables.
NON lpDS1ChanTcIndex	1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS1ChanTc tables.
lpDS1ChanTcProvTable	1.3.6.1.4.1.562.2.4.1.12.7.2.4.10		not-accessible	This group contains all specific provisioning data for a Tc component.
lpDS1ChanTcProvEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.4.10.1		not-accessible	An entry in the lpDS1ChanTcProvTable.
HEX lpDS1ChanTcReplacementData	1.3.6.1.4.1.562.2.4.1.12.7.2.4.10.1.1	Hex	read-write	This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
U32 lpDS1ChanTcSignalOneDuration	1.3.6.1.4.1.562.2.4.1.12.7.2.4.10.1.2	Unsigned32	read-write	This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
lpDS1ChanTcOpTable	1.3.6.1.4.1.562.2.4.1.12.7.2.4.11		not-accessible	This group contains all specific operational data for a Tc component.
lpDS1ChanTcOpEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.4.11.1		not-accessible	An entry in the lpDS1ChanTcOpTable.
INT lpDS1ChanTcIngressConditioning	1.3.6.1.4.1.562.2.4.1.12.7.2.4.11.1.1	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
INT lpDS1ChanTcEgressConditioning	1.3.6.1.4.1.562.2.4.1.12.7.2.4.11.1.2	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
lpDS1ChanTcSigOneTable	1.3.6.1.4.1.562.2.4.1.12.7.2.4.398		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
lpDS1ChanTcSigOneEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.4.398.1		not-accessible	An entry in the lpDS1ChanTcSigOneTable.
INT lpDS1ChanTcSigOneIndex	1.3.6.1.4.1.562.2.4.1.12.7.2.4.398.1.1	INTEGER	not-accessible	This variable represents the lpDS1ChanTcSigOneTable specific index for the lpDS1ChanTcSigOneTable.
U32 lpDS1ChanTcSigOneValue	1.3.6.1.4.1.562.2.4.1.12.7.2.4.398.1.2	Unsigned32	read-write	This variable represents an individual value for the lpDS1ChanTcSigOneTable.
lpDS1ChanTcSigTwoTable	1.3.6.1.4.1.562.2.4.1.12.7.2.4.399		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
lpDS1ChanTcSigTwoEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.4.399.1		not-accessible	An entry in the lpDS1ChanTcSigTwoTable.
INT lpDS1ChanTcSigTwoIndex	1.3.6.1.4.1.562.2.4.1.12.7.2.4.399.1.1	INTEGER	not-accessible	This variable represents the lpDS1ChanTcSigTwoTable specific index for the lpDS1ChanTcSigTwoTable.
U32 lpDS1ChanTcSigTwoValue	1.3.6.1.4.1.562.2.4.1.12.7.2.4.399.1.2	Unsigned32	read-write	This variable represents an individual value for the lpDS1ChanTcSigTwoTable.
lpDS1ChanProvTable	1.3.6.1.4.1.562.2.4.1.12.7.2.10		not-accessible	This group contains all of the provisional data for a Channel component.
lpDS1ChanProvEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.10.1		not-accessible	An entry in the lpDS1ChanProvTable.
OCT lpDS1ChanTimeslots	1.3.6.1.4.1.562.2.4.1.12.7.2.10.1.1	OCTET STRING	read-write	This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
INT lpDS1ChanTimeslotDataRate	1.3.6.1.4.1.562.2.4.1.12.7.2.10.1.2	INTEGER	read-write	This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependent on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56kbit/s is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
LIN lpDS1ChanApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.7.2.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
lpDS1ChanCidDataTable	1.3.6.1.4.1.562.2.4.1.12.7.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpDS1ChanCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.11.1		not-accessible	An entry in the lpDS1ChanCidDataTable.
U32 lpDS1ChanCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.7.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
lpDS1ChanIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.7.2.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpDS1ChanIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.12.1		not-accessible	An entry in the lpDS1ChanIfEntryTable.
INT lpDS1ChanIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM lpDS1ChanIfIndex	1.3.6.1.4.1.562.2.4.1.12.7.2.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
lpDS1ChanOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.2.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpDS1ChanOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.13.1		not-accessible	An entry in the lpDS1ChanOperStatusTable.
INT lpDS1ChanSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
lpDS1ChanStateTable	1.3.6.1.4.1.562.2.4.1.12.7.2.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpDS1ChanStateEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1		not-accessible	An entry in the lpDS1ChanStateTable.
INT lpDS1ChanAdminState	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS1ChanOperationalState	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS1ChanUsageState	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpDS1ChanAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpDS1ChanProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpDS1ChanControlStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpDS1ChanAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT lpDS1ChanStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpDS1ChanUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
lpDS1ChanOperTable	1.3.6.1.4.1.562.2.4.1.12.7.2.15		not-accessible	This group contains all of the operational data for a Channel component.
lpDS1ChanOperEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.15.1		not-accessible	An entry in the lpDS1ChanOperTable.
G32 lpDS1ChanActualChannelSpeed	1.3.6.1.4.1.562.2.4.1.12.7.2.15.1.1	Gauge32	read-only	This attribute displays the measured link speed of the Channel component.
lpDS1ChanAdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.7.2.16		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpDS1ChanAdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.16.1		not-accessible	An entry in the lpDS1ChanAdminInfoTable.
STR lpDS1ChanVendor	1.3.6.1.4.1.562.2.4.1.12.7.2.16.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpDS1ChanCommentText	1.3.6.1.4.1.562.2.4.1.12.7.2.16.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
lpDS1Test	1.3.6.1.4.1.562.2.4.1.12.7.3
lpDS1TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.3.1		not-accessible	This entry controls the addition and deletion of lpDS1Test components.
lpDS1TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.3.1.1		not-accessible	A single entry in the table represents a single lpDS1Test component.
ROW lpDS1TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.7.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS1Test components. These components cannot be added nor deleted.
STR lpDS1TestComponentName	1.3.6.1.4.1.562.2.4.1.12.7.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpDS1TestStorageType	1.3.6.1.4.1.562.2.4.1.12.7.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1Test tables.
NON lpDS1TestIndex	1.3.6.1.4.1.562.2.4.1.12.7.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS1Test tables.
lpDS1TestStateTable	1.3.6.1.4.1.562.2.4.1.12.7.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpDS1TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.7.3.10.1		not-accessible	An entry in the lpDS1TestStateTable.
INT lpDS1TestAdminState	1.3.6.1.4.1.562.2.4.1.12.7.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpDS1TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.7.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpDS1TestUsageState	1.3.6.1.4.1.562.2.4.1.12.7.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
lpDS1TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.7.3.11		not-accessible	This group contains all of the operational data for a Test component.
lpDS1TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1		not-accessible	An entry in the lpDS1TestSetupTable.
STR lpDS1TestPurpose	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT lpDS1TestType	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 lpDS1TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT lpDS1TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX lpDS1TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpDS1TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpDS1TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpDS1TestDuration	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
lpDS1TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.7.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpDS1TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1		not-accessible	An entry in the lpDS1TestResultsTable.
C32 lpDS1TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 lpDS1TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpDS1TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
NUM lpDS1TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpDS1TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpDS1TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpDS1TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpDS1TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS1TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS1TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpDS1TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
lpDS1Dsp	1.3.6.1.4.1.562.2.4.1.12.7.4
lpDS1DspRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.4.1		not-accessible	This entry controls the addition and deletion of lpDS1Dsp components.
lpDS1DspRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.4.1.1		not-accessible	A single entry in the table represents a single lpDS1Dsp component.
ROW lpDS1DspRowStatus	1.3.6.1.4.1.562.2.4.1.12.7.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS1Dsp components. These components cannot be added nor deleted.
STR lpDS1DspComponentName	1.3.6.1.4.1.562.2.4.1.12.7.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpDS1DspStorageType	1.3.6.1.4.1.562.2.4.1.12.7.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1Dsp tables.
NON lpDS1DspIndex	1.3.6.1.4.1.562.2.4.1.12.7.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS1Dsp tables.
lpDS1Audio	1.3.6.1.4.1.562.2.4.1.12.7.5
lpDS1AudioRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.5.1		not-accessible	This entry controls the addition and deletion of lpDS1Audio components.
lpDS1AudioRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.5.1.1		not-accessible	A single entry in the table represents a single lpDS1Audio component.
ROW lpDS1AudioRowStatus	1.3.6.1.4.1.562.2.4.1.12.7.5.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS1Audio components. These components cannot be added nor deleted.
STR lpDS1AudioComponentName	1.3.6.1.4.1.562.2.4.1.12.7.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpDS1AudioStorageType	1.3.6.1.4.1.562.2.4.1.12.7.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1Audio tables.
NON lpDS1AudioIndex	1.3.6.1.4.1.562.2.4.1.12.7.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS1Audio tables.
lpDS1ProvTable	1.3.6.1.4.1.562.2.4.1.12.7.10		not-accessible	This group contains all of the provisioning data for a DS1 component.
lpDS1ProvEntry	1.3.6.1.4.1.562.2.4.1.12.7.10.1		not-accessible	An entry in the lpDS1ProvTable.
INT lpDS1LineType	1.3.6.1.4.1.562.2.4.1.12.7.10.1.1	INTEGER	read-write	This attribute defines the framing of the DS1 line. d4 defines a framing pattern of 12 frames per multiframe. esf defines a framing pattern of 24 frames per multiframe. d4Cas defines a framing pattern of 12 frames per multiframe with channel associated signalling. esfCas defines a framing pattern of 24 frames per multiframe with channel associated signalling. unframed defines an unknown framing pattern for clear channels. For cell-based cards only the default option esf is permitted.
INT lpDS1ZeroCoding	1.3.6.1.4.1.562.2.4.1.12.7.10.1.2	INTEGER	read-write	This attribute defines the zero encoding on the DS1 line. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the available bandwidth of the channel by 1/8. b8zs substitutes a pattern of bipolar violations if more than 7 zeros in a row are to be transported. ami specifies Alternate Mark Inversion, in which successive marks (ones) alternate between positive and negative polarity voltage signals, and spaces (zeros) are sent as a zero amplitude signal. When zeroCoding is set to ami and lineType is set to d4, it is recommended that raiAlarmType be set to SBit in order to avoid possible mimic RAI alarm. For cell-based cards only the default value b8zs is permitted.
INT lpDS1ClockingSource	1.3.6.1.4.1.562.2.4.1.12.7.10.1.3	INTEGER	read-write	This attribute defines the source of the transmit clock for the DS1 line. When local is selected, the crystal on the port generates the clocking for the line. When line is selected, the port synchronizes to the clock from the facility. When module is selected, the ports clock synchronizes to the clock provided by the oscillator on the active CP. When otherPort is selected, the port synchronizes to the port with a clocking source of line. When srtsMode is selected, the port synchronization is taken from the SRTS (Synchronous Residual Time-Stamp) bits extracted from the AAL1 cells. This option is only available for unstructured AAL1 data services when the other ports on the card have their clocking source set to module. If the NetworkSynchronization (NS) component is present the default value of this attribute will be module otherwise it will default to local. Note that 3pDS1Atm cards have one common clock source for all ports and do not support the line clock source; all three ports must have the same value, either local or module.
INT lpDS1RaiAlarmType	1.3.6.1.4.1.562.2.4.1.12.7.10.1.4	INTEGER	read-write	This attribute defines the method of sending a RAI (Remote Alarm Indication) alarm on a DS1 line. When SBit is selected, RAI alarm is sent by setting the S bit in frame 12. When Bit2 is selected, RAI alarm is sent by setting bit 2 in all timeslots to 0. When fdl is selected, RAI alarm is sent by a repeating pattern of 00 hex and FF hex on the FDL link. Note that for lineType of d4, only the SBit and the Bit2 methods are applicable. Whereas for lineType of esf, only the Bit2 and the fdl methods are applicable. SBit method is recommended if lineType is set to d4 and zeroCoding is set to ami. This will help to avoid potential mimic RAI alarm when 1's density is too low in the data transmitted. For cell-based cards only the default value fdl is permitted.
U32 lpDS1LineLength	1.3.6.1.4.1.562.2.4.1.12.7.10.1.5	Unsigned32	read-write	This attribute defines the line length (in feet) for equalization calculations for the DS1 line. The value ranges between 0-655. For 8pDS1Atm cards the actual value used for equalization is rounded up to the nearest 110 feet; for all other card types the actual value used is rounded to the nearest 50 feet.
lpDS1CidDataTable	1.3.6.1.4.1.562.2.4.1.12.7.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpDS1CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.7.11.1		not-accessible	An entry in the lpDS1CidDataTable.
U32 lpDS1CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.7.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
lpDS1AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.7.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpDS1AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.7.12.1		not-accessible	An entry in the lpDS1AdminInfoTable.
STR lpDS1Vendor	1.3.6.1.4.1.562.2.4.1.12.7.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpDS1CommentText	1.3.6.1.4.1.562.2.4.1.12.7.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
lpDS1IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.7.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpDS1IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.7.13.1		not-accessible	An entry in the lpDS1IfEntryTable.
INT lpDS1IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.7.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM lpDS1IfIndex	1.3.6.1.4.1.562.2.4.1.12.7.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
lpDS1OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpDS1OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.14.1		not-accessible	An entry in the lpDS1OperStatusTable.
INT lpDS1SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.7.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
lpDS1StateTable	1.3.6.1.4.1.562.2.4.1.12.7.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpDS1StateEntry	1.3.6.1.4.1.562.2.4.1.12.7.15.1		not-accessible	An entry in the lpDS1StateTable.
INT lpDS1AdminState	1.3.6.1.4.1.562.2.4.1.12.7.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS1OperationalState	1.3.6.1.4.1.562.2.4.1.12.7.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS1UsageState	1.3.6.1.4.1.562.2.4.1.12.7.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpDS1AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.7.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpDS1ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.7.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpDS1ControlStatus	1.3.6.1.4.1.562.2.4.1.12.7.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpDS1AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.7.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT lpDS1StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.7.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpDS1UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.7.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
lpDS1OperTable	1.3.6.1.4.1.562.2.4.1.12.7.16		not-accessible	This group contains the common operational data for a component in a digital hierarchy interface.
lpDS1OperEntry	1.3.6.1.4.1.562.2.4.1.12.7.16.1		not-accessible	An entry in the lpDS1OperTable.
INT lpDS1LosAlarm	1.3.6.1.4.1.562.2.4.1.12.7.16.1.1	INTEGER	read-only	This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulated for a period of 2 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). A LOS defect is detected upon observing all zeros for 150 ms (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: upon observing 175 +/- 75 pulse positions with no pulses of either positive or negative polarity). If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOS alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOS alarm state. The LOS alarm state is cleared when LOS defects are absent for 10 seconds +/- 0.5 seconds.
INT lpDS1RxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.7.16.1.2	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both an Out Of Frame condition exists and a 1's density of at least 99.9% is present for a time T, where 3 ms T 75 ms; for 8pE1Atm cards: when both an Out Of Frame condition exists and fewer than three 0's have been received in 512 bit periods). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
INT lpDS1LofAlarm	1.3.6.1.4.1.562.2.4.1.12.7.16.1.3	INTEGER	read-only	This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (for DS1: 2 out of 5 framing bits in error; for E1: 3 consecutive frame alignment patterns in error) have been detected for 3 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
INT lpDS1RxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.7.16.1.4	INTEGER	read-only	This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards: alarm is declared immediately upon observing the defect is present, with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm state is entered when the RAI defect indicator has been observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and 8pDS1Atm cards: alarm is cleared immediately upon observing the defect is absent, with no integration time). The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
INT lpDS1TxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.7.16.1.5	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the port is in a locked state.
INT lpDS1TxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.7.16.1.6	INTEGER	read-only	This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port detects a LOF alarm condition (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: RAI is transmitted when the port detects a LOS, LOF, or AIS condition).
lpDS1StatsTable	1.3.6.1.4.1.562.2.4.1.12.7.17		not-accessible	This group contains the common statistical data for a component in a digital hierarchy interface.
lpDS1StatsEntry	1.3.6.1.4.1.562.2.4.1.12.7.17.1		not-accessible	An entry in the lpDS1StatsTable.
C32 lpDS1RunningTime	1.3.6.1.4.1.562.2.4.1.12.7.17.1.1	Counter32	read-only	The number of seconds since the port component was activated.
C32 lpDS1ErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.7.17.1.2	Counter32	read-only	The number of seconds that the port has been in an error free state.
C32 lpDS1ErroredSec	1.3.6.1.4.1.562.2.4.1.12.7.17.1.3	Counter32	read-only	An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
C32 lpDS1SevErroredSec	1.3.6.1.4.1.562.2.4.1.12.7.17.1.4	Counter32	read-only	A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
C32 lpDS1SevErroredFrmSec	1.3.6.1.4.1.562.2.4.1.12.7.17.1.5	Counter32	read-only	A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
C32 lpDS1UnavailSec	1.3.6.1.4.1.562.2.4.1.12.7.17.1.6	Counter32	read-only	The total number of seconds that the interface is in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
C32 lpDS1BpvErrors	1.3.6.1.4.1.562.2.4.1.12.7.17.1.7	Counter32	read-only	The current count of Bipolar Violations. A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line.
C32 lpDS1CrcErrors	1.3.6.1.4.1.562.2.4.1.12.7.17.1.8	Counter32	read-only	If the interface is a DS1 line, it is the current count of CRC-6 errors. These will only be counted when the lineType is ESF. If the interface is an E1 line, it is the total number of CRC-4 errors. These will only be counted when crc4Mode is on.
C32 lpDS1FrmErrors	1.3.6.1.4.1.562.2.4.1.12.7.17.1.9	Counter32	read-only	The current count of frame errors. A frame error is an error in the framing bits
C32 lpDS1LosStateChanges	1.3.6.1.4.1.562.2.4.1.12.7.17.1.10	Counter32	read-only	The total number of times that the line lost signal.
C32 lpDS1SlipErrors	1.3.6.1.4.1.562.2.4.1.12.7.17.1.11	Counter32	read-only	The total number of times that the line experienced a controlled frame slip. This attribute is incremented for ports on the voice cards (for example the 1pDS1V and the 1pE1V function processors) only.
lpE1	1.3.6.1.4.1.562.2.4.1.12.8
lpE1RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.1		not-accessible	This entry controls the addition and deletion of lpE1 components.
lpE1RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.1.1		not-accessible	A single entry in the table represents a single lpE1 component.
ROW lpE1RowStatus	1.3.6.1.4.1.562.2.4.1.12.8.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpE1 components. These components can be added and deleted.
STR lpE1ComponentName	1.3.6.1.4.1.562.2.4.1.12.8.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpE1StorageType	1.3.6.1.4.1.562.2.4.1.12.8.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1 tables.
I32 lpE1Index	1.3.6.1.4.1.562.2.4.1.12.8.1.1.10	Integer32	not-accessible	This variable represents the index for the lpE1 tables.
lpE1Chan	1.3.6.1.4.1.562.2.4.1.12.8.2
lpE1ChanRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.2.1		not-accessible	This entry controls the addition and deletion of lpE1Chan components.
lpE1ChanRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.1.1		not-accessible	A single entry in the table represents a single lpE1Chan component.
ROW lpE1ChanRowStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpE1Chan components. These components can be added and deleted.
STR lpE1ChanComponentName	1.3.6.1.4.1.562.2.4.1.12.8.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpE1ChanStorageType	1.3.6.1.4.1.562.2.4.1.12.8.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1Chan tables.
I32 lpE1ChanIndex	1.3.6.1.4.1.562.2.4.1.12.8.2.1.1.10	Integer32	not-accessible	This variable represents the index for the lpE1Chan tables.
lpE1ChanTest	1.3.6.1.4.1.562.2.4.1.12.8.2.2
lpE1ChanTestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.2.2.1		not-accessible	This entry controls the addition and deletion of lpE1ChanTest components.
lpE1ChanTestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1		not-accessible	A single entry in the table represents a single lpE1ChanTest component.
ROW lpE1ChanTestRowStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpE1ChanTest components. These components cannot be added nor deleted.
STR lpE1ChanTestComponentName	1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpE1ChanTestStorageType	1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1ChanTest tables.
NON lpE1ChanTestIndex	1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE1ChanTest tables.
lpE1ChanTestStateTable	1.3.6.1.4.1.562.2.4.1.12.8.2.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpE1ChanTestStateEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.2.10.1		not-accessible	An entry in the lpE1ChanTestStateTable.
INT lpE1ChanTestAdminState	1.3.6.1.4.1.562.2.4.1.12.8.2.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpE1ChanTestOperationalState	1.3.6.1.4.1.562.2.4.1.12.8.2.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpE1ChanTestUsageState	1.3.6.1.4.1.562.2.4.1.12.8.2.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
lpE1ChanTestSetupTable	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpE1ChanTestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1		not-accessible	An entry in the lpE1ChanTestSetupTable.
STR lpE1ChanTestPurpose	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT lpE1ChanTestType	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 lpE1ChanTestFrmSize	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT lpE1ChanTestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX lpE1ChanTestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpE1ChanTestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpE1ChanTestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpE1ChanTestDuration	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
lpE1ChanTestResultsTable	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpE1ChanTestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1		not-accessible	An entry in the lpE1ChanTestResultsTable.
C32 lpE1ChanTestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 lpE1ChanTestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpE1ChanTestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
NUM lpE1ChanTestBitsTx	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpE1ChanTestBytesTx	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpE1ChanTestFrmTx	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpE1ChanTestBitsRx	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpE1ChanTestBytesRx	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpE1ChanTestFrmRx	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpE1ChanTestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpE1ChanTestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
lpE1ChanCell	1.3.6.1.4.1.562.2.4.1.12.8.2.3
lpE1ChanCellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.2.3.1		not-accessible	This entry controls the addition and deletion of lpE1ChanCell components.
lpE1ChanCellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1		not-accessible	A single entry in the table represents a single lpE1ChanCell component.
ROW lpE1ChanCellRowStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpE1ChanCell components. These components can be added and deleted.
STR lpE1ChanCellComponentName	1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpE1ChanCellStorageType	1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1ChanCell tables.
NON lpE1ChanCellIndex	1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE1ChanCell tables.
lpE1ChanCellProvTable	1.3.6.1.4.1.562.2.4.1.12.8.2.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
lpE1ChanCellProvEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.3.10.1		not-accessible	An entry in the lpE1ChanCellProvTable.
U32 lpE1ChanCellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.8.2.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
INT lpE1ChanCellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.8.2.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT lpE1ChanCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.8.2.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
lpE1ChanCellOperTable	1.3.6.1.4.1.562.2.4.1.12.8.2.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpE1ChanCellOperEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.3.11.1		not-accessible	An entry in the lpE1ChanCellOperTable.
INT lpE1ChanCellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.8.2.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
lpE1ChanCellStatsTable	1.3.6.1.4.1.562.2.4.1.12.8.2.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpE1ChanCellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1		not-accessible	An entry in the lpE1ChanCellStatsTable.
C32 lpE1ChanCellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 lpE1ChanCellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
G32 lpE1ChanCellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpE1ChanCellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 lpE1ChanCellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
lpE1ChanTc	1.3.6.1.4.1.562.2.4.1.12.8.2.4
lpE1ChanTcRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.2.4.1		not-accessible	This entry controls the addition and deletion of lpE1ChanTc components.
lpE1ChanTcRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1		not-accessible	A single entry in the table represents a single lpE1ChanTc component.
ROW lpE1ChanTcRowStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpE1ChanTc components. These components can be added and deleted.
STR lpE1ChanTcComponentName	1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpE1ChanTcStorageType	1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1ChanTc tables.
NON lpE1ChanTcIndex	1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE1ChanTc tables.
lpE1ChanTcProvTable	1.3.6.1.4.1.562.2.4.1.12.8.2.4.10		not-accessible	This group contains all specific provisioning data for a Tc component.
lpE1ChanTcProvEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.4.10.1		not-accessible	An entry in the lpE1ChanTcProvTable.
HEX lpE1ChanTcReplacementData	1.3.6.1.4.1.562.2.4.1.12.8.2.4.10.1.1	Hex	read-write	This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
U32 lpE1ChanTcSignalOneDuration	1.3.6.1.4.1.562.2.4.1.12.8.2.4.10.1.2	Unsigned32	read-write	This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
lpE1ChanTcOpTable	1.3.6.1.4.1.562.2.4.1.12.8.2.4.11		not-accessible	This group contains all specific operational data for a Tc component.
lpE1ChanTcOpEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.4.11.1		not-accessible	An entry in the lpE1ChanTcOpTable.
INT lpE1ChanTcIngressConditioning	1.3.6.1.4.1.562.2.4.1.12.8.2.4.11.1.1	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
INT lpE1ChanTcEgressConditioning	1.3.6.1.4.1.562.2.4.1.12.8.2.4.11.1.2	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
lpE1ChanTcSigOneTable	1.3.6.1.4.1.562.2.4.1.12.8.2.4.398		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
lpE1ChanTcSigOneEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.4.398.1		not-accessible	An entry in the lpE1ChanTcSigOneTable.
INT lpE1ChanTcSigOneIndex	1.3.6.1.4.1.562.2.4.1.12.8.2.4.398.1.1	INTEGER	not-accessible	This variable represents the lpE1ChanTcSigOneTable specific index for the lpE1ChanTcSigOneTable.
U32 lpE1ChanTcSigOneValue	1.3.6.1.4.1.562.2.4.1.12.8.2.4.398.1.2	Unsigned32	read-write	This variable represents an individual value for the lpE1ChanTcSigOneTable.
lpE1ChanTcSigTwoTable	1.3.6.1.4.1.562.2.4.1.12.8.2.4.399		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
lpE1ChanTcSigTwoEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.4.399.1		not-accessible	An entry in the lpE1ChanTcSigTwoTable.
INT lpE1ChanTcSigTwoIndex	1.3.6.1.4.1.562.2.4.1.12.8.2.4.399.1.1	INTEGER	not-accessible	This variable represents the lpE1ChanTcSigTwoTable specific index for the lpE1ChanTcSigTwoTable.
U32 lpE1ChanTcSigTwoValue	1.3.6.1.4.1.562.2.4.1.12.8.2.4.399.1.2	Unsigned32	read-write	This variable represents an individual value for the lpE1ChanTcSigTwoTable.
lpE1ChanProvTable	1.3.6.1.4.1.562.2.4.1.12.8.2.10		not-accessible	This group contains all of the provisional data for a Channel component.
lpE1ChanProvEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.10.1		not-accessible	An entry in the lpE1ChanProvTable.
OCT lpE1ChanTimeslots	1.3.6.1.4.1.562.2.4.1.12.8.2.10.1.1	OCTET STRING	read-write	This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
INT lpE1ChanTimeslotDataRate	1.3.6.1.4.1.562.2.4.1.12.8.2.10.1.2	INTEGER	read-write	This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependent on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56kbit/s is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
LIN lpE1ChanApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.8.2.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
lpE1ChanCidDataTable	1.3.6.1.4.1.562.2.4.1.12.8.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpE1ChanCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.11.1		not-accessible	An entry in the lpE1ChanCidDataTable.
U32 lpE1ChanCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.8.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
lpE1ChanIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.8.2.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpE1ChanIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.12.1		not-accessible	An entry in the lpE1ChanIfEntryTable.
INT lpE1ChanIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM lpE1ChanIfIndex	1.3.6.1.4.1.562.2.4.1.12.8.2.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
lpE1ChanOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.2.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpE1ChanOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.13.1		not-accessible	An entry in the lpE1ChanOperStatusTable.
INT lpE1ChanSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
lpE1ChanStateTable	1.3.6.1.4.1.562.2.4.1.12.8.2.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpE1ChanStateEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1		not-accessible	An entry in the lpE1ChanStateTable.
INT lpE1ChanAdminState	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpE1ChanOperationalState	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpE1ChanUsageState	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpE1ChanAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpE1ChanProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpE1ChanControlStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpE1ChanAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT lpE1ChanStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpE1ChanUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
lpE1ChanOperTable	1.3.6.1.4.1.562.2.4.1.12.8.2.15		not-accessible	This group contains all of the operational data for a Channel component.
lpE1ChanOperEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.15.1		not-accessible	An entry in the lpE1ChanOperTable.
G32 lpE1ChanActualChannelSpeed	1.3.6.1.4.1.562.2.4.1.12.8.2.15.1.1	Gauge32	read-only	This attribute displays the measured link speed of the Channel component.
lpE1ChanAdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.8.2.16		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpE1ChanAdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.16.1		not-accessible	An entry in the lpE1ChanAdminInfoTable.
STR lpE1ChanVendor	1.3.6.1.4.1.562.2.4.1.12.8.2.16.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpE1ChanCommentText	1.3.6.1.4.1.562.2.4.1.12.8.2.16.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
lpE1Test	1.3.6.1.4.1.562.2.4.1.12.8.3
lpE1TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.3.1		not-accessible	This entry controls the addition and deletion of lpE1Test components.
lpE1TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.3.1.1		not-accessible	A single entry in the table represents a single lpE1Test component.
ROW lpE1TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.8.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpE1Test components. These components cannot be added nor deleted.
STR lpE1TestComponentName	1.3.6.1.4.1.562.2.4.1.12.8.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpE1TestStorageType	1.3.6.1.4.1.562.2.4.1.12.8.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1Test tables.
NON lpE1TestIndex	1.3.6.1.4.1.562.2.4.1.12.8.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE1Test tables.
lpE1TestStateTable	1.3.6.1.4.1.562.2.4.1.12.8.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpE1TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.8.3.10.1		not-accessible	An entry in the lpE1TestStateTable.
INT lpE1TestAdminState	1.3.6.1.4.1.562.2.4.1.12.8.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpE1TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.8.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpE1TestUsageState	1.3.6.1.4.1.562.2.4.1.12.8.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
lpE1TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.8.3.11		not-accessible	This group contains all of the operational data for a Test component.
lpE1TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1		not-accessible	An entry in the lpE1TestSetupTable.
STR lpE1TestPurpose	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT lpE1TestType	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 lpE1TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT lpE1TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX lpE1TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpE1TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpE1TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpE1TestDuration	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
lpE1TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.8.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpE1TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1		not-accessible	An entry in the lpE1TestResultsTable.
C32 lpE1TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 lpE1TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpE1TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
NUM lpE1TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpE1TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpE1TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpE1TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpE1TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpE1TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpE1TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpE1TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
lpE1Dsp	1.3.6.1.4.1.562.2.4.1.12.8.4
lpE1DspRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.4.1		not-accessible	This entry controls the addition and deletion of lpE1Dsp components.
lpE1DspRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.4.1.1		not-accessible	A single entry in the table represents a single lpE1Dsp component.
ROW lpE1DspRowStatus	1.3.6.1.4.1.562.2.4.1.12.8.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpE1Dsp components. These components cannot be added nor deleted.
STR lpE1DspComponentName	1.3.6.1.4.1.562.2.4.1.12.8.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpE1DspStorageType	1.3.6.1.4.1.562.2.4.1.12.8.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1Dsp tables.
NON lpE1DspIndex	1.3.6.1.4.1.562.2.4.1.12.8.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE1Dsp tables.
lpE1Audio	1.3.6.1.4.1.562.2.4.1.12.8.5
lpE1AudioRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.5.1		not-accessible	This entry controls the addition and deletion of lpE1Audio components.
lpE1AudioRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.5.1.1		not-accessible	A single entry in the table represents a single lpE1Audio component.
ROW lpE1AudioRowStatus	1.3.6.1.4.1.562.2.4.1.12.8.5.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpE1Audio components. These components cannot be added nor deleted.
STR lpE1AudioComponentName	1.3.6.1.4.1.562.2.4.1.12.8.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpE1AudioStorageType	1.3.6.1.4.1.562.2.4.1.12.8.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1Audio tables.
NON lpE1AudioIndex	1.3.6.1.4.1.562.2.4.1.12.8.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE1Audio tables.
lpE1ProvTable	1.3.6.1.4.1.562.2.4.1.12.8.10		not-accessible	This group contains all of the provisioning data for an E1 component.
lpE1ProvEntry	1.3.6.1.4.1.562.2.4.1.12.8.10.1		not-accessible	An entry in the lpE1ProvTable.
INT lpE1LineType	1.3.6.1.4.1.562.2.4.1.12.8.10.1.1	INTEGER	read-write	This attribute specifies the framing of the E1 line. When cas (channel associated signalling) is selected, timeslot 16 is reserved for multiframe signalling and only 30 timeslots are available for data. The signalling bits are not interpreted. When ccs (common channel signalling) is selected, timeslot 16 is not reserved for multiframe signalling and 31 timeslots are available for data. The signalling bits are not interpreted. When unframed is selected, a clear channel is defined whereby data from all timeslots including the framing data (in timeslot 0) and timeslot 16 are passed transparently. This value is valid only for AAL1 cards. For cell-based cards the ATM Forum specifies that timeslot 16 be reserved, leaving 30 timeslots available for data. The default value is cas except for the 8pE1Atm card, for which the default and only valid value is ccs.
INT lpE1ClockingSource	1.3.6.1.4.1.562.2.4.1.12.8.10.1.2	INTEGER	read-write	This attribute defines the source of the transmit clock for the E1 line. When local is selected, the crystal on the port generates the clocking for the line. When line is selected, the port synchronizes to the clock from the facility. When module is selected, the ports clock synchronizes to the clock provided by the oscillator on the active CP. When otherPort is selected, the port synchronizes to the port with a clocking source of line. When srtsMode is selected, the port sychronization is taken from the SRTS (Synchronous Residual Time Stamp) bits within the ATM cell. If the NetworkSynchronization (NS) component is present the default value of this attribute will be module otherwise it will default to line except for the 3pE1Atm card which defaults to local. The 3pE1Atm card has one common clock source for all ports and does not support the line clock source; all three ports must have the same value, either local or module. The clockingSource values otherPort and srtsMode are only valid for the AAL1 cards. For the AAL1 cards either: all four ports' clockingSource values must be local OR all four ports' clockingSource values must be module OR one port's clockingSource value must be line and the other three must be otherPort. A port can only have srtsMode selected if the other ports are module or srtsMode.
INT lpE1Crc4Mode	1.3.6.1.4.1.562.2.4.1.12.8.10.1.3	INTEGER	read-write	This attribute defines whether the CRC-4 checking and generation on the E1 line is enabled or disabled. The default CRC-4 mode is off except for the cell-based cards which default to on as per the ATM Forum.
INT lpE1SendRaiOnAis	1.3.6.1.4.1.562.2.4.1.12.8.10.1.4	INTEGER	read-write	This attribute defines whether the Remote Alarm Indicator (RAI) will be sent when receiving an AIS alarm. The value is yes by default; it can be changed to no only for ports on J2MV cards.
U32 lpE1RaiDeclareAlarmTime	1.3.6.1.4.1.562.2.4.1.12.8.10.1.5	Unsigned32	read-write	This attribute specifies the period of time that a Remote Alarm Indicator (RAI) must be present before declaring an RAI alarm. The value of auto sets the RAI declare time to the default value for E1 and E1C card types which do not have hardware support for RAI response. On E1C card types with hardware support, if the value of auto is set, RAI response is done according to the standards. If auto is set, the value of the raiClearAlarmTime attribute is ignored and auto is used. This attribute is for E1 and E1C card types only. For all other card types, the default value must be used. VALUES ( 0 = auto )
U32 lpE1RaiClearAlarmTime	1.3.6.1.4.1.562.2.4.1.12.8.10.1.6	Unsigned32	read-write	This attribute specifies the period of time that a Remote Alarm Indicator (RAI) has been absent before clearing an RAI alarm. The value of auto sets the RAI clear time to the default value for E1 and E1C card types which do not have hardware support for RAI response. On E1C card types with hardware support, if the value of auto is set, RAI response is done according to the standards. If auto is set, the value of the raiDeclareAlarmTime attribute is ignored and auto is used. This attribute is for E1 and E1C card types only. For all other card types, the default value must be used. VALUES ( 0 = auto )
lpE1CidDataTable	1.3.6.1.4.1.562.2.4.1.12.8.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpE1CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.8.11.1		not-accessible	An entry in the lpE1CidDataTable.
U32 lpE1CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.8.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
lpE1AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.8.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpE1AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.8.12.1		not-accessible	An entry in the lpE1AdminInfoTable.
STR lpE1Vendor	1.3.6.1.4.1.562.2.4.1.12.8.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpE1CommentText	1.3.6.1.4.1.562.2.4.1.12.8.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
lpE1IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.8.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpE1IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.8.13.1		not-accessible	An entry in the lpE1IfEntryTable.
INT lpE1IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.8.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM lpE1IfIndex	1.3.6.1.4.1.562.2.4.1.12.8.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
lpE1OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpE1OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.14.1		not-accessible	An entry in the lpE1OperStatusTable.
INT lpE1SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.8.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
lpE1StateTable	1.3.6.1.4.1.562.2.4.1.12.8.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpE1StateEntry	1.3.6.1.4.1.562.2.4.1.12.8.15.1		not-accessible	An entry in the lpE1StateTable.
INT lpE1AdminState	1.3.6.1.4.1.562.2.4.1.12.8.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpE1OperationalState	1.3.6.1.4.1.562.2.4.1.12.8.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpE1UsageState	1.3.6.1.4.1.562.2.4.1.12.8.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpE1AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.8.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpE1ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.8.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpE1ControlStatus	1.3.6.1.4.1.562.2.4.1.12.8.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpE1AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.8.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT lpE1StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.8.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpE1UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.8.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
lpE1OperTable	1.3.6.1.4.1.562.2.4.1.12.8.16		not-accessible	This group contains the common operational data for a component in a digital hierarchy interface.
lpE1OperEntry	1.3.6.1.4.1.562.2.4.1.12.8.16.1		not-accessible	An entry in the lpE1OperTable.
INT lpE1LosAlarm	1.3.6.1.4.1.562.2.4.1.12.8.16.1.1	INTEGER	read-only	This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulated for a period of 2 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). A LOS defect is detected upon observing all zeros for 150 ms (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: upon observing 175 +/- 75 pulse positions with no pulses of either positive or negative polarity). If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOS alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOS alarm state. The LOS alarm state is cleared when LOS defects are absent for 10 seconds +/- 0.5 seconds.
INT lpE1RxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.8.16.1.2	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both an Out Of Frame condition exists and a 1's density of at least 99.9% is present for a time T, where 3 ms T 75 ms; for 8pE1Atm cards: when both an Out Of Frame condition exists and fewer than three 0's have been received in 512 bit periods). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
INT lpE1LofAlarm	1.3.6.1.4.1.562.2.4.1.12.8.16.1.3	INTEGER	read-only	This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (for DS1: 2 out of 5 framing bits in error; for E1: 3 consecutive frame alignment patterns in error) have been detected for 3 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
INT lpE1RxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.8.16.1.4	INTEGER	read-only	This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards: alarm is declared immediately upon observing the defect is present, with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm state is entered when the RAI defect indicator has been observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and 8pDS1Atm cards: alarm is cleared immediately upon observing the defect is absent, with no integration time). The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
INT lpE1TxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.8.16.1.5	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the port is in a locked state.
INT lpE1TxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.8.16.1.6	INTEGER	read-only	This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port detects a LOF alarm condition (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: RAI is transmitted when the port detects a LOS, LOF, or AIS condition).
lpE1E1OperTable	1.3.6.1.4.1.562.2.4.1.12.8.17		not-accessible	This group contains all of the operational data for a E1 component that are not defined in the DSCommonOp group.
lpE1E1OperEntry	1.3.6.1.4.1.562.2.4.1.12.8.17.1		not-accessible	An entry in the lpE1E1OperTable.
INT lpE1MultifrmLofAlarm	1.3.6.1.4.1.562.2.4.1.12.8.17.1.1	INTEGER	read-only	This attribute indicates whether a multiframe LOF (loss of frame) alarm state is entered. A multiframe LOF alarm state is entered when a multiframe LOF defect (2 consecutive errors in the multiframe alignment signal) has been detected and accumulated for 2.5 seconds +/- 0.5 seconds. If the multiframe LOF defects are intermittently occurring, the multiframe LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The alarm is cleared when the defect is not detected for 10 seconds +/- 0.5 seconds. When the multiframe LOF alarm is on, a multiframe RAI alarm indicator is transmitted on the line. The 8pE1Atm card does not support the multiframe LOF alarm.
INT lpE1RxMultifrmRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.8.17.1.2	INTEGER	read-only	This attribute displays whether a multiframe RAI (remote alarm indicator) alarm state has been entered. A multiframe RAI alarm state is entered when a multiframe RAI alarm indicator (bit 6 of timeslot 16 in frame 0 is set to a one) is observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the multiframe RAI indicator is intermittently received, the multiframe RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The multiframe RAI alarm condition is cleared when the multiframe RAI alarm indication is not received for 10 seconds +/- 0.5 seconds. The multiframe RAI alarm is usually an indication that the far end facility is unable to gain multiframe synchronization. The 8pE1Atm card does not support the multiframe RAI alarm.
INT lpE1TxMultifrmRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.8.17.1.3	INTEGER	read-only	This attribute displays whether a multiframe RAI (remote alarm indicator) alarm is being sent on the E1 line. This is transmitted when the E1 port detects a multiframe LOF condition. The 8pE1Atm card does not generate the multiframe RAI alarm.
lpE1StatsTable	1.3.6.1.4.1.562.2.4.1.12.8.18		not-accessible	This group contains the common statistical data for a component in a digital hierarchy interface.
lpE1StatsEntry	1.3.6.1.4.1.562.2.4.1.12.8.18.1		not-accessible	An entry in the lpE1StatsTable.
C32 lpE1RunningTime	1.3.6.1.4.1.562.2.4.1.12.8.18.1.1	Counter32	read-only	The number of seconds since the port component was activated.
C32 lpE1ErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.8.18.1.2	Counter32	read-only	The number of seconds that the port has been in an error free state.
C32 lpE1ErroredSec	1.3.6.1.4.1.562.2.4.1.12.8.18.1.3	Counter32	read-only	An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
C32 lpE1SevErroredSec	1.3.6.1.4.1.562.2.4.1.12.8.18.1.4	Counter32	read-only	A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
C32 lpE1SevErroredFrmSec	1.3.6.1.4.1.562.2.4.1.12.8.18.1.5	Counter32	read-only	A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
C32 lpE1UnavailSec	1.3.6.1.4.1.562.2.4.1.12.8.18.1.6	Counter32	read-only	The total number of seconds that the interface is in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
C32 lpE1BpvErrors	1.3.6.1.4.1.562.2.4.1.12.8.18.1.7	Counter32	read-only	The current count of Bipolar Violations. A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line.
C32 lpE1CrcErrors	1.3.6.1.4.1.562.2.4.1.12.8.18.1.8	Counter32	read-only	If the interface is a DS1 line, it is the current count of CRC-6 errors. These will only be counted when the lineType is ESF. If the interface is an E1 line, it is the total number of CRC-4 errors. These will only be counted when crc4Mode is on.
C32 lpE1FrmErrors	1.3.6.1.4.1.562.2.4.1.12.8.18.1.9	Counter32	read-only	The current count of frame errors. A frame error is an error in the framing bits
C32 lpE1LosStateChanges	1.3.6.1.4.1.562.2.4.1.12.8.18.1.10	Counter32	read-only	The total number of times that the line lost signal.
C32 lpE1SlipErrors	1.3.6.1.4.1.562.2.4.1.12.8.18.1.11	Counter32	read-only	The total number of times that the line experienced a controlled frame slip. This attribute is incremented for ports on the voice cards (for example the 1pDS1V and the 1pE1V function processors) only.
lpV35	1.3.6.1.4.1.562.2.4.1.12.9
lpV35RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.9.1		not-accessible	This entry controls the addition and deletion of lpV35 components.
lpV35RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.9.1.1		not-accessible	A single entry in the table represents a single lpV35 component.
ROW lpV35RowStatus	1.3.6.1.4.1.562.2.4.1.12.9.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpV35 components. These components can be added and deleted.
STR lpV35ComponentName	1.3.6.1.4.1.562.2.4.1.12.9.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpV35StorageType	1.3.6.1.4.1.562.2.4.1.12.9.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpV35 tables.
I32 lpV35Index	1.3.6.1.4.1.562.2.4.1.12.9.1.1.10	Integer32	not-accessible	This variable represents the index for the lpV35 tables.
lpV35Test	1.3.6.1.4.1.562.2.4.1.12.9.2
lpV35TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.9.2.1		not-accessible	This entry controls the addition and deletion of lpV35Test components.
lpV35TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.9.2.1.1		not-accessible	A single entry in the table represents a single lpV35Test component.
ROW lpV35TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.9.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpV35Test components. These components cannot be added nor deleted.
STR lpV35TestComponentName	1.3.6.1.4.1.562.2.4.1.12.9.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpV35TestStorageType	1.3.6.1.4.1.562.2.4.1.12.9.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpV35Test tables.
NON lpV35TestIndex	1.3.6.1.4.1.562.2.4.1.12.9.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpV35Test tables.
lpV35TestStateTable	1.3.6.1.4.1.562.2.4.1.12.9.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpV35TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.9.2.10.1		not-accessible	An entry in the lpV35TestStateTable.
INT lpV35TestAdminState	1.3.6.1.4.1.562.2.4.1.12.9.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpV35TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.9.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpV35TestUsageState	1.3.6.1.4.1.562.2.4.1.12.9.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
lpV35TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.9.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpV35TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1		not-accessible	An entry in the lpV35TestSetupTable.
STR lpV35TestPurpose	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT lpV35TestType	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 lpV35TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT lpV35TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX lpV35TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpV35TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpV35TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpV35TestDuration	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
lpV35TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.9.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpV35TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1		not-accessible	An entry in the lpV35TestResultsTable.
C32 lpV35TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 lpV35TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpV35TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
NUM lpV35TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpV35TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpV35TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpV35TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpV35TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpV35TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpV35TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpV35TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
lpV35ProvTable	1.3.6.1.4.1.562.2.4.1.12.9.10		not-accessible	This group contains all specific provisioning data for a V35 component.
lpV35ProvEntry	1.3.6.1.4.1.562.2.4.1.12.9.10.1		not-accessible	An entry in the lpV35ProvTable.
INT lpV35LinkMode	1.3.6.1.4.1.562.2.4.1.12.9.10.1.1	INTEGER	read-write	This attribute defines the intended gender of the V.35 interface. The actual gender of the interface is determined by the physical connection to the patch panel. If the hardware setup does not match this attribute, an alarm will be generated. In dte mode, the RTS line signal is driven as specified by the attribute readyLineState when the interface passes its initial diagnostics. Then, the RTS line signal will be driven as specified in the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signals (RFS, DSR, and DCD) are compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified input line states are observed. In dce mode, the V35 component behaves similarly as when it is in dte mode. However, it will be driving the DCE line signals (RFS, DSR, and DCD) and monitoring the DTE line signal (RTS) as specified by the attributes readyLineState and dataTransferLineState.
OCT lpV35ReadyLineState	1.3.6.1.4.1.562.2.4.1.12.9.10.1.2	OCTET STRING	read-write	This attribute specifies the line signals originating from the V.35 interface that will always be turned on, provided the interface passes its diagnostics. This set of signals is generally required for maintaining the connection. Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. See also linkMode. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
OCT lpV35DataTransferLineState	1.3.6.1.4.1.562.2.4.1.12.9.10.1.3	OCTET STRING	read-write	This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
U32 lpV35LineStatusTimeOut	1.3.6.1.4.1.562.2.4.1.12.9.10.1.4	Unsigned32	read-write	This attribute defines the time that the line state must be stable (good or bad) before a line state change is declared.
U32 lpV35LineSpeed	1.3.6.1.4.1.562.2.4.1.12.9.10.1.5	Unsigned32	read-write	This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. The clock rate is rounded up to the nearest available value. Note that the actual clock rates are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed. The actual lineSpeeds configurable on a V.35 DCE interface are: 3840000, 2560000, 2048000, 1920000, 1536000, 1344000, 1280000, 1024000, 960000, 768000, 672000, 640000, 512000, 448000, 384000, 336000, 320000, 256000, 224000, 192000, 168000, 128000, 112000, 64000, 56000, 48000, 32000, 19200, 9600. Note that linspeeds of 1024000 and 2048000 cannot be provisioned on cards that have ports provisioned at 3840000, 2560000, 1920000, 1280000, 960000, 640000 or 320000.
INT lpV35ClockingSource	1.3.6.1.4.1.562.2.4.1.12.9.10.1.6	INTEGER	read-write	This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the attribute is local, the outgoing clocks are synchronized to a local oscillator on the FP. If the value of the attribute is module, the outgoing clocks are synchronized to the oscillator on the active CP.
INT lpV35DteDataClockSource	1.3.6.1.4.1.562.2.4.1.12.9.10.1.7	INTEGER	read-write	This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. A DTE interface uses TSET(DCE) and RSET(DCE) for timing. If the value of the attribute is fromDce, the DCE uses the internally generated transmit clock to supply both TSET(DCE) and RSET(DCE). If the value of the attribute is fromDte, the DCE still uses the internally generated transmit clock to supply TSET(DCE), but the receive timing is derived from TSET(DTE) on the link. The fromDte mode is recommended when the DTE is far away from the DCE interface. Note that TSET(DTE) is CCITT V.24 circuit 113; TSET(DCE) is CCITT V.24 circuit 114; and RSET(DCE) is CCITT V.24 circuit 115.
LIN lpV35ApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.9.10.1.8	Link	read-write	This attribute contains the component name of a Framer which is associated with the V35 component.
INT lpV35EnableDynamicSpeed	1.3.6.1.4.1.562.2.4.1.12.9.10.1.9	INTEGER	read-write	When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This attribute can be set to yes only if the linkMode is dce and the dteDataClockSource is fromDte.
lpV35CidDataTable	1.3.6.1.4.1.562.2.4.1.12.9.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpV35CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.9.11.1		not-accessible	An entry in the lpV35CidDataTable.
U32 lpV35CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.9.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
lpV35AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.9.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpV35AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.9.12.1		not-accessible	An entry in the lpV35AdminInfoTable.
STR lpV35Vendor	1.3.6.1.4.1.562.2.4.1.12.9.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpV35CommentText	1.3.6.1.4.1.562.2.4.1.12.9.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
lpV35IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.9.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpV35IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.9.13.1		not-accessible	An entry in the lpV35IfEntryTable.
INT lpV35IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.9.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM lpV35IfIndex	1.3.6.1.4.1.562.2.4.1.12.9.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
lpV35OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.9.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpV35OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.9.14.1		not-accessible	An entry in the lpV35OperStatusTable.
INT lpV35SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.9.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
lpV35StateTable	1.3.6.1.4.1.562.2.4.1.12.9.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpV35StateEntry	1.3.6.1.4.1.562.2.4.1.12.9.15.1		not-accessible	An entry in the lpV35StateTable.
INT lpV35AdminState	1.3.6.1.4.1.562.2.4.1.12.9.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpV35OperationalState	1.3.6.1.4.1.562.2.4.1.12.9.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpV35UsageState	1.3.6.1.4.1.562.2.4.1.12.9.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpV35AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.9.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpV35ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.9.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpV35ControlStatus	1.3.6.1.4.1.562.2.4.1.12.9.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpV35AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.9.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT lpV35StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.9.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpV35UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.9.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
lpV35OperTable	1.3.6.1.4.1.562.2.4.1.12.9.16		not-accessible	This group contains all specific operational data for a V35 component.
lpV35OperEntry	1.3.6.1.4.1.562.2.4.1.12.9.16.1		not-accessible	An entry in the lpV35OperTable.
INT lpV35ActualLinkMode	1.3.6.1.4.1.562.2.4.1.12.9.16.1.1	INTEGER	read-only	This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The interface behaves as a DCE or DTE according to the actualLinkMode.
OCT lpV35LineState	1.3.6.1.4.1.562.2.4.1.12.9.16.1.2	OCTET STRING	read-only	This attribute contains the current state of the interface signals. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
G32 lpV35ActualTxLineSpeed	1.3.6.1.4.1.562.2.4.1.12.9.16.1.3	Gauge32	read-only	This attribute is the measured speed of the transmit clock.
G32 lpV35ActualRxLineSpeed	1.3.6.1.4.1.562.2.4.1.12.9.16.1.4	Gauge32	read-only	This attribute is the measured speed of the receive clock.
C32 lpV35DataXferStateChanges	1.3.6.1.4.1.562.2.4.1.12.9.16.1.5	Counter32	read-only	This attribute contains the number of times that the line has entered or exited the data transfer state.
lpX21	1.3.6.1.4.1.562.2.4.1.12.10
lpX21RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.10.1		not-accessible	This entry controls the addition and deletion of lpX21 components.
lpX21RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.10.1.1		not-accessible	A single entry in the table represents a single lpX21 component.
ROW lpX21RowStatus	1.3.6.1.4.1.562.2.4.1.12.10.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpX21 components. These components can be added and deleted.
STR lpX21ComponentName	1.3.6.1.4.1.562.2.4.1.12.10.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpX21StorageType	1.3.6.1.4.1.562.2.4.1.12.10.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpX21 tables.
I32 lpX21Index	1.3.6.1.4.1.562.2.4.1.12.10.1.1.10	Integer32	not-accessible	This variable represents the index for the lpX21 tables.
lpX21Test	1.3.6.1.4.1.562.2.4.1.12.10.2
lpX21TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.10.2.1		not-accessible	This entry controls the addition and deletion of lpX21Test components.
lpX21TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.10.2.1.1		not-accessible	A single entry in the table represents a single lpX21Test component.
ROW lpX21TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.10.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpX21Test components. These components cannot be added nor deleted.
STR lpX21TestComponentName	1.3.6.1.4.1.562.2.4.1.12.10.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpX21TestStorageType	1.3.6.1.4.1.562.2.4.1.12.10.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpX21Test tables.
NON lpX21TestIndex	1.3.6.1.4.1.562.2.4.1.12.10.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpX21Test tables.
lpX21TestStateTable	1.3.6.1.4.1.562.2.4.1.12.10.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpX21TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.10.2.10.1		not-accessible	An entry in the lpX21TestStateTable.
INT lpX21TestAdminState	1.3.6.1.4.1.562.2.4.1.12.10.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpX21TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.10.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpX21TestUsageState	1.3.6.1.4.1.562.2.4.1.12.10.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
lpX21TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.10.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpX21TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1		not-accessible	An entry in the lpX21TestSetupTable.
STR lpX21TestPurpose	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT lpX21TestType	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 lpX21TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT lpX21TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX lpX21TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpX21TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpX21TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpX21TestDuration	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
lpX21TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.10.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpX21TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1		not-accessible	An entry in the lpX21TestResultsTable.
C32 lpX21TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 lpX21TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpX21TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
NUM lpX21TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpX21TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpX21TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpX21TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpX21TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpX21TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpX21TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpX21TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
lpX21ProvTable	1.3.6.1.4.1.562.2.4.1.12.10.10		not-accessible	This group contains all specific provisioning data for an X21 component.
lpX21ProvEntry	1.3.6.1.4.1.562.2.4.1.12.10.10.1		not-accessible	An entry in the lpX21ProvTable.
INT lpX21LinkMode	1.3.6.1.4.1.562.2.4.1.12.10.10.1.1	INTEGER	read-write	This attribute defines the intended gender of the X21 component (V.11 interface). The actual gender of the interface is determined by the physical connection to the patch panel. If the hardware setup does not match this attribute, an alarm will be generated. In dte mode, the control line signal is driven as specified by the attribute readyLineState when the interface passes its initial diagnostics. Then, the control line signal will be driven as specified in the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signal (indication) is compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified line states are observed. In dce mode, the X21 component behaves similarly as when it is in dte mode. However, it will be driving the DCE line signal (control) and monitoring the DTE line signal (indication) as specified by the attributes readyLineState and dataTransferLineState.
OCT lpX21ReadyLineState	1.3.6.1.4.1.562.2.4.1.12.10.10.1.2	OCTET STRING	read-write	This attribute specifies the line signals originating from the V.11 interface that will always be turned on, provided the interface passes its diagnostics. This set of signals is generally required to maintain the connection. Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. See also linkMode. Description of bits: indication(0) control(1)
OCT lpX21DataTransferLineState	1.3.6.1.4.1.562.2.4.1.12.10.10.1.3	OCTET STRING	read-write	The state of the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: indication(0) control(1)
U32 lpX21LineStatusTimeOut	1.3.6.1.4.1.562.2.4.1.12.10.10.1.4	Unsigned32	read-write	This attribute defines the time the line state must be stable (good or bad) before a state change is declared.
U32 lpX21LineSpeed	1.3.6.1.4.1.562.2.4.1.12.10.10.1.5	Unsigned32	read-write	This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. The clock rate is rounded up to the nearest available value. Note that the actual clock rates are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed. The actual lineSpeeds configurable on a V.11 DCE interface are: 7680000, 3840000, 2560000, 2048000, 1920000, 1536000, 1344000, 1280000, 1024000, 960000, 768000, 672000, 640000, 512000, 448000, 384000, 336000, 320000, 256000, 224000, 192000, 168000, 128000, 112000, 64000, 56000, 48000, 32000, 19200, 9600. Note that linspeeds of 1024000 and 2048000 cannot be provisioned on cards that have ports provisioned at 3840000, 2560000, 1920000, 1280000, 960000, 640000 or 320000. DESCRIPTION
INT lpX21ClockingSource	1.3.6.1.4.1.562.2.4.1.12.10.10.1.6	INTEGER	read-write	This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the attribute is local, the outgoing clocks are synchronized to a local oscillator on the FP. If the value of the attribute is module, the outgoing clocks are synchronized to the oscillator on the active CP.
INT lpX21DteDataClockSource	1.3.6.1.4.1.562.2.4.1.12.10.10.1.7	INTEGER	read-write	This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. Note that a V.11 DTE interface uses the S clock (see X.21 standard) for both receive data and transmit data timing. The DTE interface always loops the received S clock back to the DCE as the X clock (see X.21 standard). If the value of the attribute is fromDce, the DCE V.11 interface uses the internally generated transmit clock as the S clock and for both receive and transmit data timing. The X clock is ignored. If the value of the attribute is fromDte, the DCE still uses the internally generated transmit clock as the S clock and for transmit data timing, but the receive data timing is derived from the X clock. The fromDte mode is recommended when the DTE is far away from the DCE interface.
INT lpX21LineTerminationRequired	1.3.6.1.4.1.562.2.4.1.12.10.10.1.8	INTEGER	read-write	This attribute specifies whether termination is required for this interface. If the hardware setup does not match this attribute, an alarm will be generated.
LIN lpX21ApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.10.10.1.9	Link	read-write	This attribute contains the component name of a Framer which is associated with the X21 component.
INT lpX21EnableDynamicSpeed	1.3.6.1.4.1.562.2.4.1.12.10.10.1.10	INTEGER	read-write	When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This attribute can be set to yes only if the linkMode is dce and the dteDataClockSource is fromDte..
lpX21CidDataTable	1.3.6.1.4.1.562.2.4.1.12.10.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpX21CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.10.11.1		not-accessible	An entry in the lpX21CidDataTable.
U32 lpX21CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.10.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
lpX21AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.10.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpX21AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.10.12.1		not-accessible	An entry in the lpX21AdminInfoTable.
STR lpX21Vendor	1.3.6.1.4.1.562.2.4.1.12.10.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpX21CommentText	1.3.6.1.4.1.562.2.4.1.12.10.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
lpX21IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.10.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpX21IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.10.13.1		not-accessible	An entry in the lpX21IfEntryTable.
INT lpX21IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.10.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM lpX21IfIndex	1.3.6.1.4.1.562.2.4.1.12.10.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
lpX21OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.10.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpX21OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.10.14.1		not-accessible	An entry in the lpX21OperStatusTable.
INT lpX21SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.10.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
lpX21StateTable	1.3.6.1.4.1.562.2.4.1.12.10.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpX21StateEntry	1.3.6.1.4.1.562.2.4.1.12.10.15.1		not-accessible	An entry in the lpX21StateTable.
INT lpX21AdminState	1.3.6.1.4.1.562.2.4.1.12.10.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpX21OperationalState	1.3.6.1.4.1.562.2.4.1.12.10.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpX21UsageState	1.3.6.1.4.1.562.2.4.1.12.10.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpX21AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.10.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpX21ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.10.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpX21ControlStatus	1.3.6.1.4.1.562.2.4.1.12.10.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpX21AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.10.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT lpX21StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.10.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpX21UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.10.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
lpX21OperTable	1.3.6.1.4.1.562.2.4.1.12.10.16		not-accessible	This group contains all specific operational data for an X21 component.
lpX21OperEntry	1.3.6.1.4.1.562.2.4.1.12.10.16.1		not-accessible	An entry in the lpX21OperTable.
INT lpX21ActualLinkMode	1.3.6.1.4.1.562.2.4.1.12.10.16.1.1	INTEGER	read-only	This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The interface behaves as a DCE or DTE according to the actualLinkMode.
OCT lpX21LineState	1.3.6.1.4.1.562.2.4.1.12.10.16.1.2	OCTET STRING	read-only	This attribute contains the current state of the interface signals. Description of bits: indication(0) control(1)
G32 lpX21ActualTxLineSpeed	1.3.6.1.4.1.562.2.4.1.12.10.16.1.3	Gauge32	read-only	This attribute is the measured speed of the transmit clock.
G32 lpX21ActualRxLineSpeed	1.3.6.1.4.1.562.2.4.1.12.10.16.1.4	Gauge32	read-only	This attribute is the measured speed of the receive clock.
C32 lpX21DataXferStateChanges	1.3.6.1.4.1.562.2.4.1.12.10.16.1.5	Counter32	read-only	This attribute contains the number of times that the line has entered or exited the data transfer state.
lpSonet	1.3.6.1.4.1.562.2.4.1.12.14
lpSonetRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.14.1		not-accessible	This entry controls the addition and deletion of lpSonet components.
lpSonetRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.14.1.1		not-accessible	A single entry in the table represents a single lpSonet component.
ROW lpSonetRowStatus	1.3.6.1.4.1.562.2.4.1.12.14.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpSonet components. These components can be added and deleted.
STR lpSonetComponentName	1.3.6.1.4.1.562.2.4.1.12.14.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpSonetStorageType	1.3.6.1.4.1.562.2.4.1.12.14.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSonet tables.
I32 lpSonetIndex	1.3.6.1.4.1.562.2.4.1.12.14.1.1.10	Integer32	not-accessible	This variable represents the index for the lpSonet tables.
lpSonetPath	1.3.6.1.4.1.562.2.4.1.12.14.2
lpSonetPathRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.14.2.1		not-accessible	This entry controls the addition and deletion of lpSonetPath components.
lpSonetPathRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.1.1		not-accessible	A single entry in the table represents a single lpSonetPath component.
ROW lpSonetPathRowStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpSonetPath components. These components can be added and deleted.
STR lpSonetPathComponentName	1.3.6.1.4.1.562.2.4.1.12.14.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpSonetPathStorageType	1.3.6.1.4.1.562.2.4.1.12.14.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSonetPath tables.
I32 lpSonetPathIndex	1.3.6.1.4.1.562.2.4.1.12.14.2.1.1.10	Integer32	not-accessible	This variable represents the index for the lpSonetPath tables.
lpSonetPathCell	1.3.6.1.4.1.562.2.4.1.12.14.2.2
lpSonetPathCellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.14.2.2.1		not-accessible	This entry controls the addition and deletion of lpSonetPathCell components.
lpSonetPathCellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1		not-accessible	A single entry in the table represents a single lpSonetPathCell component.
ROW lpSonetPathCellRowStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpSonetPathCell components. These components cannot be added nor deleted.
STR lpSonetPathCellComponentName	1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpSonetPathCellStorageType	1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSonetPathCell tables.
NON lpSonetPathCellIndex	1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpSonetPathCell tables.
lpSonetPathCellProvTable	1.3.6.1.4.1.562.2.4.1.12.14.2.2.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
lpSonetPathCellProvEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.2.10.1		not-accessible	An entry in the lpSonetPathCellProvTable.
U32 lpSonetPathCellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.14.2.2.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
INT lpSonetPathCellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.14.2.2.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT lpSonetPathCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.14.2.2.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
lpSonetPathCellOperTable	1.3.6.1.4.1.562.2.4.1.12.14.2.2.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpSonetPathCellOperEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.2.11.1		not-accessible	An entry in the lpSonetPathCellOperTable.
INT lpSonetPathCellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.14.2.2.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
lpSonetPathCellStatsTable	1.3.6.1.4.1.562.2.4.1.12.14.2.2.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpSonetPathCellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1		not-accessible	An entry in the lpSonetPathCellStatsTable.
C32 lpSonetPathCellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 lpSonetPathCellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
G32 lpSonetPathCellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpSonetPathCellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 lpSonetPathCellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
lpSonetPathProvTable	1.3.6.1.4.1.562.2.4.1.12.14.2.10		not-accessible	This group contains all of the provisioning data for a Sonet/Sdh Path component.
lpSonetPathProvEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.10.1		not-accessible	An entry in the lpSonetPathProvTable.
LIN lpSonetPathApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.14.2.10.1.1	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the Path component.
lpSonetPathCidDataTable	1.3.6.1.4.1.562.2.4.1.12.14.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpSonetPathCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.11.1		not-accessible	An entry in the lpSonetPathCidDataTable.
U32 lpSonetPathCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.14.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
lpSonetPathStateTable	1.3.6.1.4.1.562.2.4.1.12.14.2.12		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpSonetPathStateEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1		not-accessible	An entry in the lpSonetPathStateTable.
INT lpSonetPathAdminState	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpSonetPathOperationalState	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpSonetPathUsageState	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpSonetPathAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpSonetPathProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpSonetPathControlStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpSonetPathAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT lpSonetPathStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpSonetPathUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
lpSonetPathIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.14.2.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpSonetPathIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.13.1		not-accessible	An entry in the lpSonetPathIfEntryTable.
INT lpSonetPathIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM lpSonetPathIfIndex	1.3.6.1.4.1.562.2.4.1.12.14.2.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
lpSonetPathOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.14.2.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpSonetPathOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.14.1		not-accessible	An entry in the lpSonetPathOperStatusTable.
INT lpSonetPathSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
lpSonetPathOperTable	1.3.6.1.4.1.562.2.4.1.12.14.2.15		not-accessible	This group contains the common operational data for Path component.
lpSonetPathOperEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.15.1		not-accessible	An entry in the lpSonetPathOperTable.
INT lpSonetPathLopAlarm	1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOP defect occurs when no valid SPE or VC pointer was received in 8 contiguous frames. If the LOP defects are intermittently occurring, the LOP defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the LOP alarm condition is cleared. The condition is cleared when no more invalid pointer has been reported for 10 seconds +/- 0.5 seconds. The lopAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSonetPathRxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.2	INTEGER	read-only	This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the occurrence of the P-AIS signal in three contiguous valid STS or STM frames (all one's in bytes H1 and H2). If the P-AIS defects are intermittently occurring, the P-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-AIS alarm condition is cleared. The condition is cleared after no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSonetPathRxRfiAlarm	1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.3	INTEGER	read-only	This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is entered when Path Remote Defect Indicator (P-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-RDI defect is the occurrence of the P-RDI signal in five contiguous valid STS or STM frames (bit 5 of the G1 byte set to 1). If the P-RDI defects are intermittently occurring, the P-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10)with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-RFI alarm condition is cleared. The condition is cleared after no P-RDI defect has been detected for 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSonetPathSignalLabelMismatch	1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.4	INTEGER	read-only	This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM defects have been observed and accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM defect occurs when detecting an unexpected path signal label. The expected Path signal labels are 'Mapping for ATM' or 'Equipped - Non Specific Payload'. If the P-SLM defects are intermittently occurring, the P-SLM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the Path Signal Label Mismatch failure condition is cleared. The condition is cleared when an expected path signal label is received for 10 seconds +/- 0.5 seconds. The signalLabelMismatch attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSonetPathTxAis	1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.5	INTEGER	read-only	This attribute displays whether the Path Alarm Indication Signal (P- AIS) signal is being transmitted on the path. The P-AIS signal is transmitted when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSonetPathTxRdi	1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.6	INTEGER	read-only	This attribute displays whether the Path Remote Defect Indicator (P-RDI) signal is being transmitted over the path signal. The P-RDI signal is transmitted over the outgoing line upon detection of LOP, P-AIS or the occurrence of the LCD state. This attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
lpSonetPathStatsTable	1.3.6.1.4.1.562.2.4.1.12.14.2.16		not-accessible	This group contains the statistics data for a Sonet/Sdh Path component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpSonetPathStatsEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1		not-accessible	An entry in the lpSonetPathStatsTable.
C32 lpSonetPathPathErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.1	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an near-end error free state.
C32 lpSonetPathPathCodeViolations	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.2	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. The count wraps at its maximum value.
C32 lpSonetPathPathErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.3	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more PCVs or one or more LOP or path AIS defects. Counting of PES is inhibited when PUAS is counted over the monitored second.
C32 lpSonetPathPathSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.4	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than x PCVs or one or more LOP or path AIS defects. The value of x is 2400 for a 155 Mbits/sec interface. Counting of PSES is inhibited when PUAS is counted over the monitored second.
C32 lpSonetPathPathAisLopSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.5	Counter32	read-only	This attribute indicates the total number of path AIS and LOP Seconds (PALSs). A PALS is declared for second intervals containing one or more path AIS or LOP defects. Counting of PALS is inhibited when PUAS is counted over the monitored second.
C32 lpSonetPathPathUnavailSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.6	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM path is unavailable. The path becomes unavailable at the onset of 10 consecutive PSESs. The 10 PSESs are included in the unavailable time. Once unavailable, the path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where a Path Unavailable Second (PUAS) is counted, counting of PCV, PES, PSES and PALS is inhibited.
C32 lpSonetPathPathFailures	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.7	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOP, P-AIS or Path Signal Label Mismatch failure) has been declared.
C32 lpSonetPathFarEndPathErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.8	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an far-end error free state.
C32 lpSonetPathFarEndPathCodeViolations	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.9	Counter32	read-only	This attribute indicates the total number of Far-End Path Code Violations (FEPCVs) detected. Each FEPCV corresponds to a path FEBE. FEPCV counting is inhibited over second intervals where a Far-End Path Severely Errored Second (FEPSES) is counted. Counting of PCVs is also inhibited over second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted. The count wraps at its maximum value.
C32 lpSonetPathFarEndPathErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.10	Counter32	read-only	This attribute indicates the total number of Far-End Path Errored Seconds (FEPESs) that have been counted. A FEPES is declared for second intervals containing one or more FEPCVs or one or more path RDI (P-RDI) defects. Counting of FEPES is inhibited when FEPUAS is counted over the monitored second.
C32 lpSonetPathFarEndPathSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.11	Counter32	read-only	This attribute indicates the total number of Far-End Path Severely Errored Seconds (FEPSESs) that have been counted. A FEPSES is declared for second intervals containing more than x FEPCVs or one or more P-RDI defects. The value of x is 2400 for a 155 Mbits/ sec interface. Counting of FEPSESs is inhibited when FEPUAS is counted over the monitored second.
C32 lpSonetPathFarEndPathAisLopSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.12	Counter32	read-only	This attribute indicates the total number of Far-End Path AIS and LOP Seconds (FEPALSs). A FEPALS is declared for second intervals containing one or more P-RDI defects. Counting of FEPALS is inhibited when FEPUAS is counted over the monitored second.
C32 lpSonetPathFarEndPathUnavailSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM far-end path is unavailable. The far-end path becomes unavailable at the onset of 10 consecutive FEPSESs. The 10 FEPSESs are included in the unavailable time. Once unavailable, the far-end path becomes available at the onset of 10 contiguous seconds with no FEPSES. The 10 seconds with no FEPSES are excluded from the unavailable time. For second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted, counting of FEPCV, FEPES, FEPSES and FEPALS is inhibited.
C32 lpSonetPathFarEndPathFailures	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.14	Counter32	read-only	This attribute indicates the total number of times that a STS/STM far-end path failure (P-RFI failure) has been declared.
lpSonetTest	1.3.6.1.4.1.562.2.4.1.12.14.3
lpSonetTestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.14.3.1		not-accessible	This entry controls the addition and deletion of lpSonetTest components.
lpSonetTestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.14.3.1.1		not-accessible	A single entry in the table represents a single lpSonetTest component.
ROW lpSonetTestRowStatus	1.3.6.1.4.1.562.2.4.1.12.14.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpSonetTest components. These components cannot be added nor deleted.
STR lpSonetTestComponentName	1.3.6.1.4.1.562.2.4.1.12.14.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpSonetTestStorageType	1.3.6.1.4.1.562.2.4.1.12.14.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSonetTest tables.
NON lpSonetTestIndex	1.3.6.1.4.1.562.2.4.1.12.14.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpSonetTest tables.
lpSonetTestStateTable	1.3.6.1.4.1.562.2.4.1.12.14.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpSonetTestStateEntry	1.3.6.1.4.1.562.2.4.1.12.14.3.10.1		not-accessible	An entry in the lpSonetTestStateTable.
INT lpSonetTestAdminState	1.3.6.1.4.1.562.2.4.1.12.14.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpSonetTestOperationalState	1.3.6.1.4.1.562.2.4.1.12.14.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpSonetTestUsageState	1.3.6.1.4.1.562.2.4.1.12.14.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
lpSonetTestSetupTable	1.3.6.1.4.1.562.2.4.1.12.14.3.11		not-accessible	This group contains all of the operational data for a Test component.
lpSonetTestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1		not-accessible	An entry in the lpSonetTestSetupTable.
STR lpSonetTestPurpose	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT lpSonetTestType	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 lpSonetTestFrmSize	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT lpSonetTestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX lpSonetTestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpSonetTestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpSonetTestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpSonetTestDuration	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
lpSonetTestResultsTable	1.3.6.1.4.1.562.2.4.1.12.14.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpSonetTestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1		not-accessible	An entry in the lpSonetTestResultsTable.
C32 lpSonetTestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 lpSonetTestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpSonetTestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
NUM lpSonetTestBitsTx	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpSonetTestBytesTx	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpSonetTestFrmTx	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpSonetTestBitsRx	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpSonetTestBytesRx	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpSonetTestFrmRx	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpSonetTestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpSonetTestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
lpSonetProvTable	1.3.6.1.4.1.562.2.4.1.12.14.10		not-accessible	This group contains all of the provisioning data for a Sonet or Sdh component.
lpSonetProvEntry	1.3.6.1.4.1.562.2.4.1.12.14.10.1		not-accessible	An entry in the lpSonetProvTable.
INT lpSonetClockingSource	1.3.6.1.4.1.562.2.4.1.12.14.10.1.1	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the OC-3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means the use of a signal phase-locked to the incoming OC-3 line rate; module means the use of a signal phase-locked to the CP reference clock. When adding a Sonet/Sdh component, the clockingSource attribute is set to module if the NetworkSynchronization component has been added and is set to local otherwise. Note that the multiport OC-3 cell-based cards has one common clock source for each of the three ports when either the clocking source local or module is selected. For this reason, it is not allowed to have at the same time the clockingSource attribute set to local on one port and module on another port. Furthermore, the clockingSource attribute cannot be set to module if the NetworkSynchronization component has not been added.
lpSonetCidDataTable	1.3.6.1.4.1.562.2.4.1.12.14.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpSonetCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.14.11.1		not-accessible	An entry in the lpSonetCidDataTable.
U32 lpSonetCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.14.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
lpSonetAdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.14.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpSonetAdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.14.12.1		not-accessible	An entry in the lpSonetAdminInfoTable.
STR lpSonetVendor	1.3.6.1.4.1.562.2.4.1.12.14.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpSonetCommentText	1.3.6.1.4.1.562.2.4.1.12.14.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
lpSonetIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.14.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpSonetIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.14.13.1		not-accessible	An entry in the lpSonetIfEntryTable.
INT lpSonetIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.14.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM lpSonetIfIndex	1.3.6.1.4.1.562.2.4.1.12.14.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
lpSonetOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.14.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpSonetOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.14.14.1		not-accessible	An entry in the lpSonetOperStatusTable.
INT lpSonetSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.14.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
lpSonetStateTable	1.3.6.1.4.1.562.2.4.1.12.14.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpSonetStateEntry	1.3.6.1.4.1.562.2.4.1.12.14.15.1		not-accessible	An entry in the lpSonetStateTable.
INT lpSonetAdminState	1.3.6.1.4.1.562.2.4.1.12.14.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpSonetOperationalState	1.3.6.1.4.1.562.2.4.1.12.14.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpSonetUsageState	1.3.6.1.4.1.562.2.4.1.12.14.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpSonetAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.14.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpSonetProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.14.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpSonetControlStatus	1.3.6.1.4.1.562.2.4.1.12.14.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpSonetAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.14.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT lpSonetStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.14.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpSonetUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.14.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
lpSonetOperTable	1.3.6.1.4.1.562.2.4.1.12.14.16		not-accessible	This group contains the common operational data for Sonet or Sdh component.
lpSonetOperEntry	1.3.6.1.4.1.562.2.4.1.12.14.16.1		not-accessible	An entry in the lpSonetOperTable.
INT lpSonetLosAlarm	1.3.6.1.4.1.562.2.4.1.12.14.16.1.1	INTEGER	read-only	This attribute indicates whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, or if an LOS defect is present when the criteria for LOF failure declaration have been met. A LOS defect is declared when 20+/-3 us of all-zeros pattern is detected. The LOS defect is cleared when two valid framing words are detected and no Loss Of Signal condition is detected during an interval of 20+/-3 us. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSonetLofAlarm	1.3.6.1.4.1.562.2.4.1.12.14.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when LOF defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, except when an LOS defect or failure is present. An LOF defect is detected when getting contiguous errored frame alignment for at least 3 msec. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSonetRxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.14.16.1.3	INTEGER	read-only	This attribute displays whether a Line Alarm Indication Signal (L- AIS) alarm state has been entered. An L-AIS alarm state is entered when L-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-AIS defect is the occurrence of the L-AIS signal in five contiguous STS (STM) frames (111 pattern in bits 6,7, and 8 of the K2 bytes). If the L-AIS defects are intermittently occurring, the L-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-AIS alarm condition is cleared. The condition is cleared after not detecting the L-AIS signal for a period of 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSonetRxRfiAlarm	1.3.6.1.4.1.562.2.4.1.12.14.16.1.4	INTEGER	read-only	This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure Indication (L-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-RDI defect is the occurrence of the L-RDI signal in five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and 8 of the K2 bytes). If the L-RDI defects are intermittently occurring, the L-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-RFI alarm condition is cleared. The condition is cleared after not detecting the L-RDI signal for a period of 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSonetTxAis	1.3.6.1.4.1.562.2.4.1.12.14.16.1.5	INTEGER	read-only	This attribute displays whether the Line Alarm Indication Signal (L- AIS) signal is being transmitted on the outgoing line. This signal is transmitted when the Sonet/Sdh is locked and left offline.
INT lpSonetTxRdi	1.3.6.1.4.1.562.2.4.1.12.14.16.1.6	INTEGER	read-only	This attribute displays whether the Line Remote Defect Indicator (L-RDI) signal is being transmitted over the OC-3 line. The L-RDI signal is transmitted upon the detection of the LOS, LOF or L-AIS defect. This attribute is always set to off when the component has been locked and left offline.
INT lpSonetUnusableTxClockRefAlarm	1.3.6.1.4.1.562.2.4.1.12.14.16.1.7	INTEGER	read-only	This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is entered when a Sonet/Sdh port provisioned to act as a transmit clock reference has received the code 'do not use for synchronization' in the S1 byte (in the SONET/ SDH line overhead) for 2.5 +/- 0.5 seconds. The condition is cleared after not detecting the 'do not use for synchronization' code for a period of 10 +/- 0.5 seconds or when the port is no longer provisioned to act as a transmit clock reference. A port is acting as a transmit clock reference if it is provisioned with a) a clockingSource of line, or b) it has been provisioned as a primaryReference, secondaryReference or tertiaryReference in the NetworkSynchronization component. The unusableTxClockRefAlarm attribute is always set to off when the component has been locked and left offline.
lpSonetStatsTable	1.3.6.1.4.1.562.2.4.1.12.14.17		not-accessible	This group contains the statistics data for a Sonet or Sdh component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpSonetStatsEntry	1.3.6.1.4.1.562.2.4.1.12.14.17.1		not-accessible	An entry in the lpSonetStatsTable.
C32 lpSonetRunningTime	1.3.6.1.4.1.562.2.4.1.12.14.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the Sonet/ Sdh component has been activated and been in unlocked state. All the other error counts that follow can be updated when this count is active.
C32 lpSonetErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an near-end error free state.
C32 lpSonetSectCodeViolations	1.3.6.1.4.1.562.2.4.1.12.14.17.1.3	Counter32	read-only	This attribute indicates the total number of Section Code Violations (SCVs) detected. A SCV corresponds to section BIP-8 error. SCV counting is inhibited for second intervals where a Section Severely Errored Second (SSES) is counted. The count wraps at its maximum value.
C32 lpSonetSectErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.4	Counter32	read-only	This attribute indicates the total number of Section Errored Seconds (SESs) that have been counted. A SES is declared for second intervals containing one or more SCVs or one or more Loss Of Signal (LOS) or Severely Errored Frame (SEF) defects. A SEF defect is the occurrence of 4 contiguous errored STS or STM frame alignment words.
C32 lpSonetSectSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.5	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Seconds (SSESs) that have been counted. A SSES is declared for second intervals containing more than x SCVs or one or more LOS or SEF defects. The value of x is 155 for a 155 Mbits/sec interface.
C32 lpSonetSectLosSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.6	Counter32	read-only	This attribute indicates the total number of Section LOS Seconds (SLOSSs) that have been counted. A SLOSS is declared for second intervals containing one or more LOS defects.
C32 lpSonetSectSevErroredFrmSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.7	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Frame Seconds (SSEFSs) that have been counted. A SSEFS is declared for second intervals containing one or more SEF defects.
C32 lpSonetSectFailures	1.3.6.1.4.1.562.2.4.1.12.14.17.1.8	Counter32	read-only	This attribute indicates the total number of times that a section failure (LOS or LOF failure) has been declared.
C32 lpSonetLineCodeViolations	1.3.6.1.4.1.562.2.4.1.12.14.17.1.9	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. Counting of LCVs is also inhibited over second intervals where a Line Unavailable Second (LUAS) is counted. The count wraps at its maximum value.
C32 lpSonetLineErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.10	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LESs) that have been counted. A LES is declared for second intervals containing one or more LCVs or one or more line AIS defects. Counting of LES is inhibited over second intervals where a LUAS is counted.
C32 lpSonetLineSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.11	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSESs) that have been counted. A LSES is declared for second intervals containing more than x LCVs or one or more L- AIS defects. The value of x is 154 for a 155 Mbits/sec interface. Counting of LSES is inhibited over second intervals where a LUAS is counted.
C32 lpSonetLineAisSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.12	Counter32	read-only	This attribute indicates the total number of Line AIS Seconds (LAISSs) that have been counted. A LAISS is declared for second intervals containing one or more L-AIS defects. Counting of LAISS is inhibited over second intervals where a LUAS is counted.
C32 lpSonetLineUnavailSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS line is unavailable. The STS line becomes unavailable at the onset of 10 consecutive LSESs. The 10 LSESs are included in the unavailable time. Once unavailable, the STS line becomes available at the onset of 10 contiguous seconds with no LSES. The 10 seconds with no LSES are excluded from the unavailable time. For second intervals where a Line Unavailable Second (LUAS) is counted, counting of LCV, LES, LSES and LAISS is inhibited.
C32 lpSonetLineFailures	1.3.6.1.4.1.562.2.4.1.12.14.17.1.14	Counter32	read-only	This attribute indicates the total number of times that a line failure (L-AIS failure) has been declared.
C32 lpSonetFarEndLineErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.15	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an far-end error free state.
C32 lpSonetFarEndLineCodeViolations	1.3.6.1.4.1.562.2.4.1.12.14.17.1.16	Counter32	read-only	This attribute indicates the total number of line FEBE detected from the incoming line. The counting of line FEBE is inhibited for second intervals where a Far-End Line Severely Errored Second (FELSES) is counted. Counting of FELCVs is also inhibited over second intervals where a Far-End Line Unavailable Second (FELUAS) is counted. The count wraps at its maximum value.
C32 lpSonetFarEndLineErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.17	Counter32	read-only	This attribute indicates the total number of Far-End Line Errored Seconds (FELESs) that have been counted. A FELES is declared for second intervals containing one or more Far-End Line CVs (FELCVs) or one or more L-RDI defects. Counting of FELES is inhibited over second intervals where a FELUAS is counted.
C32 lpSonetFarEndLineSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.18	Counter32	read-only	This attribute indicates the total number of Far-End Line Severely Errored Seconds (FELSESs) that have been counted. A FELSES is declared for second intervals containing more than x FELCVs or one or more L-RDI defects. The value of x is 154 for a 155 Mbits/ sec interface. Counting of FELSES is inhibited over second intervals where a FELUAS is counted.
C32 lpSonetFarEndLineAisSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.19	Counter32	read-only	This attribute indicates the total number of Far-End Line AIS Seconds (FELAISSs) that have been counted. A FELAISS is declared for second intervals one or more L-RDI defects. Counting of FELAISS is inhibited over second intervals where a FELUAS is counted.
C32 lpSonetFarEndLineUnavailSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.20	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS far-end line is unavailable. The STS far-end line becomes unavailable at the onset of 10 consecutive FELSESs. The 10 FELSESs are included in the unavailable time. Once unavailable, the STS far-end line becomes available at the onset of 10 contiguous seconds with no FELSES. The 10 seconds with no FELSES are excluded from the unavailable time. For second intervals where a Far-End Line Unavailable Second (FELUAS) is counted, counting of FELCV, FELES, FELSES and FELAISS is inhibited.
C32 lpSonetFarEndLineFailures	1.3.6.1.4.1.562.2.4.1.12.14.17.1.21	Counter32	read-only	This attribute indicates the total number of times that a far-end line failure (L-RFI failure) has been declared.
lpSdh	1.3.6.1.4.1.562.2.4.1.12.15
lpSdhRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.15.1		not-accessible	This entry controls the addition and deletion of lpSdh components.
lpSdhRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.15.1.1		not-accessible	A single entry in the table represents a single lpSdh component.
ROW lpSdhRowStatus	1.3.6.1.4.1.562.2.4.1.12.15.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpSdh components. These components can be added and deleted.
STR lpSdhComponentName	1.3.6.1.4.1.562.2.4.1.12.15.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpSdhStorageType	1.3.6.1.4.1.562.2.4.1.12.15.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSdh tables.
I32 lpSdhIndex	1.3.6.1.4.1.562.2.4.1.12.15.1.1.10	Integer32	not-accessible	This variable represents the index for the lpSdh tables.
lpSdhPath	1.3.6.1.4.1.562.2.4.1.12.15.2
lpSdhPathRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.15.2.1		not-accessible	This entry controls the addition and deletion of lpSdhPath components.
lpSdhPathRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.1.1		not-accessible	A single entry in the table represents a single lpSdhPath component.
ROW lpSdhPathRowStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpSdhPath components. These components can be added and deleted.
STR lpSdhPathComponentName	1.3.6.1.4.1.562.2.4.1.12.15.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpSdhPathStorageType	1.3.6.1.4.1.562.2.4.1.12.15.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSdhPath tables.
I32 lpSdhPathIndex	1.3.6.1.4.1.562.2.4.1.12.15.2.1.1.10	Integer32	not-accessible	This variable represents the index for the lpSdhPath tables.
lpSdhPathCell	1.3.6.1.4.1.562.2.4.1.12.15.2.2
lpSdhPathCellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.15.2.2.1		not-accessible	This entry controls the addition and deletion of lpSdhPathCell components.
lpSdhPathCellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1		not-accessible	A single entry in the table represents a single lpSdhPathCell component.
ROW lpSdhPathCellRowStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpSdhPathCell components. These components cannot be added nor deleted.
STR lpSdhPathCellComponentName	1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpSdhPathCellStorageType	1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSdhPathCell tables.
NON lpSdhPathCellIndex	1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpSdhPathCell tables.
lpSdhPathCellProvTable	1.3.6.1.4.1.562.2.4.1.12.15.2.2.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
lpSdhPathCellProvEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.2.10.1		not-accessible	An entry in the lpSdhPathCellProvTable.
U32 lpSdhPathCellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.15.2.2.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
INT lpSdhPathCellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.15.2.2.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT lpSdhPathCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.15.2.2.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
lpSdhPathCellOperTable	1.3.6.1.4.1.562.2.4.1.12.15.2.2.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpSdhPathCellOperEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.2.11.1		not-accessible	An entry in the lpSdhPathCellOperTable.
INT lpSdhPathCellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.15.2.2.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
lpSdhPathCellStatsTable	1.3.6.1.4.1.562.2.4.1.12.15.2.2.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpSdhPathCellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1		not-accessible	An entry in the lpSdhPathCellStatsTable.
C32 lpSdhPathCellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 lpSdhPathCellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
G32 lpSdhPathCellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpSdhPathCellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 lpSdhPathCellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
lpSdhPathProvTable	1.3.6.1.4.1.562.2.4.1.12.15.2.10		not-accessible	This group contains all of the provisioning data for a Sonet/Sdh Path component.
lpSdhPathProvEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.10.1		not-accessible	An entry in the lpSdhPathProvTable.
LIN lpSdhPathApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.15.2.10.1.1	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the Path component.
lpSdhPathCidDataTable	1.3.6.1.4.1.562.2.4.1.12.15.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpSdhPathCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.11.1		not-accessible	An entry in the lpSdhPathCidDataTable.
U32 lpSdhPathCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.15.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
lpSdhPathStateTable	1.3.6.1.4.1.562.2.4.1.12.15.2.12		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpSdhPathStateEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1		not-accessible	An entry in the lpSdhPathStateTable.
INT lpSdhPathAdminState	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpSdhPathOperationalState	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpSdhPathUsageState	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpSdhPathAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpSdhPathProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpSdhPathControlStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpSdhPathAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT lpSdhPathStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpSdhPathUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
lpSdhPathIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.15.2.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpSdhPathIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.13.1		not-accessible	An entry in the lpSdhPathIfEntryTable.
INT lpSdhPathIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM lpSdhPathIfIndex	1.3.6.1.4.1.562.2.4.1.12.15.2.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
lpSdhPathOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.15.2.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpSdhPathOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.14.1		not-accessible	An entry in the lpSdhPathOperStatusTable.
INT lpSdhPathSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
lpSdhPathOperTable	1.3.6.1.4.1.562.2.4.1.12.15.2.15		not-accessible	This group contains the common operational data for Path component.
lpSdhPathOperEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.15.1		not-accessible	An entry in the lpSdhPathOperTable.
INT lpSdhPathLopAlarm	1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOP defect occurs when no valid SPE or VC pointer was received in 8 contiguous frames. If the LOP defects are intermittently occurring, the LOP defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the LOP alarm condition is cleared. The condition is cleared when no more invalid pointer has been reported for 10 seconds +/- 0.5 seconds. The lopAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSdhPathRxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.2	INTEGER	read-only	This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the occurrence of the P-AIS signal in three contiguous valid STS or STM frames (all one's in bytes H1 and H2). If the P-AIS defects are intermittently occurring, the P-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-AIS alarm condition is cleared. The condition is cleared after no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSdhPathRxRfiAlarm	1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.3	INTEGER	read-only	This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is entered when Path Remote Defect Indicator (P-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-RDI defect is the occurrence of the P-RDI signal in five contiguous valid STS or STM frames (bit 5 of the G1 byte set to 1). If the P-RDI defects are intermittently occurring, the P-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10)with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-RFI alarm condition is cleared. The condition is cleared after no P-RDI defect has been detected for 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSdhPathSignalLabelMismatch	1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.4	INTEGER	read-only	This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM defects have been observed and accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM defect occurs when detecting an unexpected path signal label. The expected Path signal labels are 'Mapping for ATM' or 'Equipped - Non Specific Payload'. If the P-SLM defects are intermittently occurring, the P-SLM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the Path Signal Label Mismatch failure condition is cleared. The condition is cleared when an expected path signal label is received for 10 seconds +/- 0.5 seconds. The signalLabelMismatch attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSdhPathTxAis	1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.5	INTEGER	read-only	This attribute displays whether the Path Alarm Indication Signal (P- AIS) signal is being transmitted on the path. The P-AIS signal is transmitted when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSdhPathTxRdi	1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.6	INTEGER	read-only	This attribute displays whether the Path Remote Defect Indicator (P-RDI) signal is being transmitted over the path signal. The P-RDI signal is transmitted over the outgoing line upon detection of LOP, P-AIS or the occurrence of the LCD state. This attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
lpSdhPathStatsTable	1.3.6.1.4.1.562.2.4.1.12.15.2.16		not-accessible	This group contains the statistics data for a Sonet/Sdh Path component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpSdhPathStatsEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1		not-accessible	An entry in the lpSdhPathStatsTable.
C32 lpSdhPathPathErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.1	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an near-end error free state.
C32 lpSdhPathPathCodeViolations	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.2	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. The count wraps at its maximum value.
C32 lpSdhPathPathErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.3	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more PCVs or one or more LOP or path AIS defects. Counting of PES is inhibited when PUAS is counted over the monitored second.
C32 lpSdhPathPathSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.4	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than x PCVs or one or more LOP or path AIS defects. The value of x is 2400 for a 155 Mbits/sec interface. Counting of PSES is inhibited when PUAS is counted over the monitored second.
C32 lpSdhPathPathAisLopSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.5	Counter32	read-only	This attribute indicates the total number of path AIS and LOP Seconds (PALSs). A PALS is declared for second intervals containing one or more path AIS or LOP defects. Counting of PALS is inhibited when PUAS is counted over the monitored second.
C32 lpSdhPathPathUnavailSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.6	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM path is unavailable. The path becomes unavailable at the onset of 10 consecutive PSESs. The 10 PSESs are included in the unavailable time. Once unavailable, the path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where a Path Unavailable Second (PUAS) is counted, counting of PCV, PES, PSES and PALS is inhibited.
C32 lpSdhPathPathFailures	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.7	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOP, P-AIS or Path Signal Label Mismatch failure) has been declared.
C32 lpSdhPathFarEndPathErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.8	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an far-end error free state.
C32 lpSdhPathFarEndPathCodeViolations	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.9	Counter32	read-only	This attribute indicates the total number of Far-End Path Code Violations (FEPCVs) detected. Each FEPCV corresponds to a path FEBE. FEPCV counting is inhibited over second intervals where a Far-End Path Severely Errored Second (FEPSES) is counted. Counting of PCVs is also inhibited over second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted. The count wraps at its maximum value.
C32 lpSdhPathFarEndPathErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.10	Counter32	read-only	This attribute indicates the total number of Far-End Path Errored Seconds (FEPESs) that have been counted. A FEPES is declared for second intervals containing one or more FEPCVs or one or more path RDI (P-RDI) defects. Counting of FEPES is inhibited when FEPUAS is counted over the monitored second.
C32 lpSdhPathFarEndPathSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.11	Counter32	read-only	This attribute indicates the total number of Far-End Path Severely Errored Seconds (FEPSESs) that have been counted. A FEPSES is declared for second intervals containing more than x FEPCVs or one or more P-RDI defects. The value of x is 2400 for a 155 Mbits/ sec interface. Counting of FEPSESs is inhibited when FEPUAS is counted over the monitored second.
C32 lpSdhPathFarEndPathAisLopSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.12	Counter32	read-only	This attribute indicates the total number of Far-End Path AIS and LOP Seconds (FEPALSs). A FEPALS is declared for second intervals containing one or more P-RDI defects. Counting of FEPALS is inhibited when FEPUAS is counted over the monitored second.
C32 lpSdhPathFarEndPathUnavailSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM far-end path is unavailable. The far-end path becomes unavailable at the onset of 10 consecutive FEPSESs. The 10 FEPSESs are included in the unavailable time. Once unavailable, the far-end path becomes available at the onset of 10 contiguous seconds with no FEPSES. The 10 seconds with no FEPSES are excluded from the unavailable time. For second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted, counting of FEPCV, FEPES, FEPSES and FEPALS is inhibited.
C32 lpSdhPathFarEndPathFailures	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.14	Counter32	read-only	This attribute indicates the total number of times that a STS/STM far-end path failure (P-RFI failure) has been declared.
lpSdhTest	1.3.6.1.4.1.562.2.4.1.12.15.3
lpSdhTestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.15.3.1		not-accessible	This entry controls the addition and deletion of lpSdhTest components.
lpSdhTestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.15.3.1.1		not-accessible	A single entry in the table represents a single lpSdhTest component.
ROW lpSdhTestRowStatus	1.3.6.1.4.1.562.2.4.1.12.15.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpSdhTest components. These components cannot be added nor deleted.
STR lpSdhTestComponentName	1.3.6.1.4.1.562.2.4.1.12.15.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpSdhTestStorageType	1.3.6.1.4.1.562.2.4.1.12.15.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSdhTest tables.
NON lpSdhTestIndex	1.3.6.1.4.1.562.2.4.1.12.15.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpSdhTest tables.
lpSdhTestStateTable	1.3.6.1.4.1.562.2.4.1.12.15.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpSdhTestStateEntry	1.3.6.1.4.1.562.2.4.1.12.15.3.10.1		not-accessible	An entry in the lpSdhTestStateTable.
INT lpSdhTestAdminState	1.3.6.1.4.1.562.2.4.1.12.15.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpSdhTestOperationalState	1.3.6.1.4.1.562.2.4.1.12.15.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpSdhTestUsageState	1.3.6.1.4.1.562.2.4.1.12.15.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
lpSdhTestSetupTable	1.3.6.1.4.1.562.2.4.1.12.15.3.11		not-accessible	This group contains all of the operational data for a Test component.
lpSdhTestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1		not-accessible	An entry in the lpSdhTestSetupTable.
STR lpSdhTestPurpose	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT lpSdhTestType	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 lpSdhTestFrmSize	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT lpSdhTestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX lpSdhTestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpSdhTestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpSdhTestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpSdhTestDuration	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
lpSdhTestResultsTable	1.3.6.1.4.1.562.2.4.1.12.15.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpSdhTestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1		not-accessible	An entry in the lpSdhTestResultsTable.
C32 lpSdhTestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 lpSdhTestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpSdhTestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
NUM lpSdhTestBitsTx	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpSdhTestBytesTx	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpSdhTestFrmTx	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpSdhTestBitsRx	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpSdhTestBytesRx	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpSdhTestFrmRx	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpSdhTestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpSdhTestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
lpSdhProvTable	1.3.6.1.4.1.562.2.4.1.12.15.10		not-accessible	This group contains all of the provisioning data for a Sonet or Sdh component.
lpSdhProvEntry	1.3.6.1.4.1.562.2.4.1.12.15.10.1		not-accessible	An entry in the lpSdhProvTable.
INT lpSdhClockingSource	1.3.6.1.4.1.562.2.4.1.12.15.10.1.1	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the OC-3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means the use of a signal phase-locked to the incoming OC-3 line rate; module means the use of a signal phase-locked to the CP reference clock. When adding a Sonet/Sdh component, the clockingSource attribute is set to module if the NetworkSynchronization component has been added and is set to local otherwise. Note that the multiport OC-3 cell-based cards has one common clock source for each of the three ports when either the clocking source local or module is selected. For this reason, it is not allowed to have at the same time the clockingSource attribute set to local on one port and module on another port. Furthermore, the clockingSource attribute cannot be set to module if the NetworkSynchronization component has not been added.
lpSdhCidDataTable	1.3.6.1.4.1.562.2.4.1.12.15.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpSdhCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.15.11.1		not-accessible	An entry in the lpSdhCidDataTable.
U32 lpSdhCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.15.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
lpSdhAdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.15.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpSdhAdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.15.12.1		not-accessible	An entry in the lpSdhAdminInfoTable.
STR lpSdhVendor	1.3.6.1.4.1.562.2.4.1.12.15.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpSdhCommentText	1.3.6.1.4.1.562.2.4.1.12.15.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
lpSdhIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.15.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpSdhIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.15.13.1		not-accessible	An entry in the lpSdhIfEntryTable.
INT lpSdhIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.15.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM lpSdhIfIndex	1.3.6.1.4.1.562.2.4.1.12.15.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
lpSdhOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.15.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpSdhOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.15.14.1		not-accessible	An entry in the lpSdhOperStatusTable.
INT lpSdhSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.15.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
lpSdhStateTable	1.3.6.1.4.1.562.2.4.1.12.15.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpSdhStateEntry	1.3.6.1.4.1.562.2.4.1.12.15.15.1		not-accessible	An entry in the lpSdhStateTable.
INT lpSdhAdminState	1.3.6.1.4.1.562.2.4.1.12.15.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpSdhOperationalState	1.3.6.1.4.1.562.2.4.1.12.15.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpSdhUsageState	1.3.6.1.4.1.562.2.4.1.12.15.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpSdhAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.15.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpSdhProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.15.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpSdhControlStatus	1.3.6.1.4.1.562.2.4.1.12.15.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpSdhAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.15.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT lpSdhStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.15.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpSdhUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.15.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
lpSdhOperTable	1.3.6.1.4.1.562.2.4.1.12.15.16		not-accessible	This group contains the common operational data for Sonet or Sdh component.
lpSdhOperEntry	1.3.6.1.4.1.562.2.4.1.12.15.16.1		not-accessible	An entry in the lpSdhOperTable.
INT lpSdhLosAlarm	1.3.6.1.4.1.562.2.4.1.12.15.16.1.1	INTEGER	read-only	This attribute indicates whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, or if an LOS defect is present when the criteria for LOF failure declaration have been met. A LOS defect is declared when 20+/-3 us of all-zeros pattern is detected. The LOS defect is cleared when two valid framing words are detected and no Loss Of Signal condition is detected during an interval of 20+/-3 us. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSdhLofAlarm	1.3.6.1.4.1.562.2.4.1.12.15.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when LOF defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, except when an LOS defect or failure is present. An LOF defect is detected when getting contiguous errored frame alignment for at least 3 msec. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSdhRxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.15.16.1.3	INTEGER	read-only	This attribute displays whether a Line Alarm Indication Signal (L- AIS) alarm state has been entered. An L-AIS alarm state is entered when L-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-AIS defect is the occurrence of the L-AIS signal in five contiguous STS (STM) frames (111 pattern in bits 6,7, and 8 of the K2 bytes). If the L-AIS defects are intermittently occurring, the L-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-AIS alarm condition is cleared. The condition is cleared after not detecting the L-AIS signal for a period of 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSdhRxRfiAlarm	1.3.6.1.4.1.562.2.4.1.12.15.16.1.4	INTEGER	read-only	This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure Indication (L-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-RDI defect is the occurrence of the L-RDI signal in five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and 8 of the K2 bytes). If the L-RDI defects are intermittently occurring, the L-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-RFI alarm condition is cleared. The condition is cleared after not detecting the L-RDI signal for a period of 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSdhTxAis	1.3.6.1.4.1.562.2.4.1.12.15.16.1.5	INTEGER	read-only	This attribute displays whether the Line Alarm Indication Signal (L- AIS) signal is being transmitted on the outgoing line. This signal is transmitted when the Sonet/Sdh is locked and left offline.
INT lpSdhTxRdi	1.3.6.1.4.1.562.2.4.1.12.15.16.1.6	INTEGER	read-only	This attribute displays whether the Line Remote Defect Indicator (L-RDI) signal is being transmitted over the OC-3 line. The L-RDI signal is transmitted upon the detection of the LOS, LOF or L-AIS defect. This attribute is always set to off when the component has been locked and left offline.
INT lpSdhUnusableTxClockRefAlarm	1.3.6.1.4.1.562.2.4.1.12.15.16.1.7	INTEGER	read-only	This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is entered when a Sonet/Sdh port provisioned to act as a transmit clock reference has received the code 'do not use for synchronization' in the S1 byte (in the SONET/ SDH line overhead) for 2.5 +/- 0.5 seconds. The condition is cleared after not detecting the 'do not use for synchronization' code for a period of 10 +/- 0.5 seconds or when the port is no longer provisioned to act as a transmit clock reference. A port is acting as a transmit clock reference if it is provisioned with a) a clockingSource of line, or b) it has been provisioned as a primaryReference, secondaryReference or tertiaryReference in the NetworkSynchronization component. The unusableTxClockRefAlarm attribute is always set to off when the component has been locked and left offline.
lpSdhStatsTable	1.3.6.1.4.1.562.2.4.1.12.15.17		not-accessible	This group contains the statistics data for a Sonet or Sdh component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpSdhStatsEntry	1.3.6.1.4.1.562.2.4.1.12.15.17.1		not-accessible	An entry in the lpSdhStatsTable.
C32 lpSdhRunningTime	1.3.6.1.4.1.562.2.4.1.12.15.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the Sonet/ Sdh component has been activated and been in unlocked state. All the other error counts that follow can be updated when this count is active.
C32 lpSdhErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an near-end error free state.
C32 lpSdhSectCodeViolations	1.3.6.1.4.1.562.2.4.1.12.15.17.1.3	Counter32	read-only	This attribute indicates the total number of Section Code Violations (SCVs) detected. A SCV corresponds to section BIP-8 error. SCV counting is inhibited for second intervals where a Section Severely Errored Second (SSES) is counted. The count wraps at its maximum value.
C32 lpSdhSectErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.4	Counter32	read-only	This attribute indicates the total number of Section Errored Seconds (SESs) that have been counted. A SES is declared for second intervals containing one or more SCVs or one or more Loss Of Signal (LOS) or Severely Errored Frame (SEF) defects. A SEF defect is the occurrence of 4 contiguous errored STS or STM frame alignment words.
C32 lpSdhSectSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.5	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Seconds (SSESs) that have been counted. A SSES is declared for second intervals containing more than x SCVs or one or more LOS or SEF defects. The value of x is 155 for a 155 Mbits/sec interface.
C32 lpSdhSectLosSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.6	Counter32	read-only	This attribute indicates the total number of Section LOS Seconds (SLOSSs) that have been counted. A SLOSS is declared for second intervals containing one or more LOS defects.
C32 lpSdhSectSevErroredFrmSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.7	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Frame Seconds (SSEFSs) that have been counted. A SSEFS is declared for second intervals containing one or more SEF defects.
C32 lpSdhSectFailures	1.3.6.1.4.1.562.2.4.1.12.15.17.1.8	Counter32	read-only	This attribute indicates the total number of times that a section failure (LOS or LOF failure) has been declared.
C32 lpSdhLineCodeViolations	1.3.6.1.4.1.562.2.4.1.12.15.17.1.9	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. Counting of LCVs is also inhibited over second intervals where a Line Unavailable Second (LUAS) is counted. The count wraps at its maximum value.
C32 lpSdhLineErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.10	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LESs) that have been counted. A LES is declared for second intervals containing one or more LCVs or one or more line AIS defects. Counting of LES is inhibited over second intervals where a LUAS is counted.
C32 lpSdhLineSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.11	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSESs) that have been counted. A LSES is declared for second intervals containing more than x LCVs or one or more L- AIS defects. The value of x is 154 for a 155 Mbits/sec interface. Counting of LSES is inhibited over second intervals where a LUAS is counted.
C32 lpSdhLineAisSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.12	Counter32	read-only	This attribute indicates the total number of Line AIS Seconds (LAISSs) that have been counted. A LAISS is declared for second intervals containing one or more L-AIS defects. Counting of LAISS is inhibited over second intervals where a LUAS is counted.
C32 lpSdhLineUnavailSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS line is unavailable. The STS line becomes unavailable at the onset of 10 consecutive LSESs. The 10 LSESs are included in the unavailable time. Once unavailable, the STS line becomes available at the onset of 10 contiguous seconds with no LSES. The 10 seconds with no LSES are excluded from the unavailable time. For second intervals where a Line Unavailable Second (LUAS) is counted, counting of LCV, LES, LSES and LAISS is inhibited.
C32 lpSdhLineFailures	1.3.6.1.4.1.562.2.4.1.12.15.17.1.14	Counter32	read-only	This attribute indicates the total number of times that a line failure (L-AIS failure) has been declared.
C32 lpSdhFarEndLineErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.15	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an far-end error free state.
C32 lpSdhFarEndLineCodeViolations	1.3.6.1.4.1.562.2.4.1.12.15.17.1.16	Counter32	read-only	This attribute indicates the total number of line FEBE detected from the incoming line. The counting of line FEBE is inhibited for second intervals where a Far-End Line Severely Errored Second (FELSES) is counted. Counting of FELCVs is also inhibited over second intervals where a Far-End Line Unavailable Second (FELUAS) is counted. The count wraps at its maximum value.
C32 lpSdhFarEndLineErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.17	Counter32	read-only	This attribute indicates the total number of Far-End Line Errored Seconds (FELESs) that have been counted. A FELES is declared for second intervals containing one or more Far-End Line CVs (FELCVs) or one or more L-RDI defects. Counting of FELES is inhibited over second intervals where a FELUAS is counted.
C32 lpSdhFarEndLineSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.18	Counter32	read-only	This attribute indicates the total number of Far-End Line Severely Errored Seconds (FELSESs) that have been counted. A FELSES is declared for second intervals containing more than x FELCVs or one or more L-RDI defects. The value of x is 154 for a 155 Mbits/ sec interface. Counting of FELSES is inhibited over second intervals where a FELUAS is counted.
C32 lpSdhFarEndLineAisSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.19	Counter32	read-only	This attribute indicates the total number of Far-End Line AIS Seconds (FELAISSs) that have been counted. A FELAISS is declared for second intervals one or more L-RDI defects. Counting of FELAISS is inhibited over second intervals where a FELUAS is counted.
C32 lpSdhFarEndLineUnavailSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.20	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS far-end line is unavailable. The STS far-end line becomes unavailable at the onset of 10 consecutive FELSESs. The 10 FELSESs are included in the unavailable time. Once unavailable, the STS far-end line becomes available at the onset of 10 contiguous seconds with no FELSES. The 10 seconds with no FELSES are excluded from the unavailable time. For second intervals where a Far-End Line Unavailable Second (FELUAS) is counted, counting of FELCV, FELES, FELSES and FELAISS is inhibited.
C32 lpSdhFarEndLineFailures	1.3.6.1.4.1.562.2.4.1.12.15.17.1.21	Counter32	read-only	This attribute indicates the total number of times that a far-end line failure (L-RFI failure) has been declared.
lpJT2	1.3.6.1.4.1.562.2.4.1.12.16
lpJT2RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.16.1		not-accessible	This entry controls the addition and deletion of lpJT2 components.
lpJT2RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.16.1.1		not-accessible	A single entry in the table represents a single lpJT2 component.
ROW lpJT2RowStatus	1.3.6.1.4.1.562.2.4.1.12.16.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpJT2 components. These components can be added and deleted.
STR lpJT2ComponentName	1.3.6.1.4.1.562.2.4.1.12.16.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpJT2StorageType	1.3.6.1.4.1.562.2.4.1.12.16.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpJT2 tables.
I32 lpJT2Index	1.3.6.1.4.1.562.2.4.1.12.16.1.1.10	Integer32	not-accessible	This variable represents the index for the lpJT2 tables.
lpJT2Test	1.3.6.1.4.1.562.2.4.1.12.16.2
lpJT2TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.16.2.1		not-accessible	This entry controls the addition and deletion of lpJT2Test components.
lpJT2TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.16.2.1.1		not-accessible	A single entry in the table represents a single lpJT2Test component.
ROW lpJT2TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.16.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpJT2Test components. These components cannot be added nor deleted.
STR lpJT2TestComponentName	1.3.6.1.4.1.562.2.4.1.12.16.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpJT2TestStorageType	1.3.6.1.4.1.562.2.4.1.12.16.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpJT2Test tables.
NON lpJT2TestIndex	1.3.6.1.4.1.562.2.4.1.12.16.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpJT2Test tables.
lpJT2TestStateTable	1.3.6.1.4.1.562.2.4.1.12.16.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpJT2TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.16.2.10.1		not-accessible	An entry in the lpJT2TestStateTable.
INT lpJT2TestAdminState	1.3.6.1.4.1.562.2.4.1.12.16.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpJT2TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.16.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpJT2TestUsageState	1.3.6.1.4.1.562.2.4.1.12.16.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
lpJT2TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.16.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpJT2TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1		not-accessible	An entry in the lpJT2TestSetupTable.
STR lpJT2TestPurpose	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT lpJT2TestType	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 lpJT2TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT lpJT2TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX lpJT2TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpJT2TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpJT2TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpJT2TestDuration	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
lpJT2TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.16.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpJT2TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1		not-accessible	An entry in the lpJT2TestResultsTable.
C32 lpJT2TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 lpJT2TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpJT2TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
NUM lpJT2TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpJT2TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpJT2TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpJT2TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpJT2TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpJT2TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpJT2TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpJT2TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
lpJT2Cell	1.3.6.1.4.1.562.2.4.1.12.16.3
lpJT2CellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.16.3.1		not-accessible	This entry controls the addition and deletion of lpJT2Cell components.
lpJT2CellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.16.3.1.1		not-accessible	A single entry in the table represents a single lpJT2Cell component.
ROW lpJT2CellRowStatus	1.3.6.1.4.1.562.2.4.1.12.16.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpJT2Cell components. These components cannot be added nor deleted.
STR lpJT2CellComponentName	1.3.6.1.4.1.562.2.4.1.12.16.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpJT2CellStorageType	1.3.6.1.4.1.562.2.4.1.12.16.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpJT2Cell tables.
NON lpJT2CellIndex	1.3.6.1.4.1.562.2.4.1.12.16.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpJT2Cell tables.
lpJT2CellProvTable	1.3.6.1.4.1.562.2.4.1.12.16.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
lpJT2CellProvEntry	1.3.6.1.4.1.562.2.4.1.12.16.3.10.1		not-accessible	An entry in the lpJT2CellProvTable.
U32 lpJT2CellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.16.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
INT lpJT2CellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.16.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT lpJT2CellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.16.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
lpJT2CellOperTable	1.3.6.1.4.1.562.2.4.1.12.16.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpJT2CellOperEntry	1.3.6.1.4.1.562.2.4.1.12.16.3.11.1		not-accessible	An entry in the lpJT2CellOperTable.
INT lpJT2CellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.16.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
lpJT2CellStatsTable	1.3.6.1.4.1.562.2.4.1.12.16.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpJT2CellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.16.3.12.1		not-accessible	An entry in the lpJT2CellStatsTable.
C32 lpJT2CellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 lpJT2CellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
G32 lpJT2CellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpJT2CellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 lpJT2CellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
lpJT2CidDataTable	1.3.6.1.4.1.562.2.4.1.12.16.10		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpJT2CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.16.10.1		not-accessible	An entry in the lpJT2CidDataTable.
U32 lpJT2CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.16.10.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
lpJT2ProvTable	1.3.6.1.4.1.562.2.4.1.12.16.11		not-accessible	This group contains all of the JT2 specific provisioning data for a JT2 component.
lpJT2ProvEntry	1.3.6.1.4.1.562.2.4.1.12.16.11.1		not-accessible	An entry in the lpJT2ProvTable.
INT lpJT2ClockingSource	1.3.6.1.4.1.562.2.4.1.12.16.11.1.1	INTEGER	read-write	This attribute defines the source of the transmit clock for the JT2 line. When the clocking source is selected from local, the oscillator on the port generates the clocking for the line. When the clocking source is selected from line, the port synchronizes to the clock recovered from the incoming line signal. When the clocking source is selected from module, the port's clock synchronizes to the clock provided by the oscillator on the active CP. Note:- that when one port is set to local, the other port must also be set to local, and when one port is set to module, the other port must also be set to module. If one of the ports is set to line, the other port must be set to otherPort. Also, if a CP reference clock is available when the JT2 component is added, the clocking source defaults to module, whereas if a CP reference clock is not available when the component is added, the clocking source defaults to local.
U32 lpJT2LineLength	1.3.6.1.4.1.562.2.4.1.12.16.11.1.2	Unsigned32	read-write	This attribute defines the line length for equalization calculations for the JT2 line. The range is between 0 and 480 feet (1 metre = 3.28 feet).
LIN lpJT2ApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.16.11.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the JT2 component.
lpJT2IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.16.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpJT2IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.16.12.1		not-accessible	An entry in the lpJT2IfEntryTable.
INT lpJT2IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.16.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM lpJT2IfIndex	1.3.6.1.4.1.562.2.4.1.12.16.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
lpJT2OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.16.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpJT2OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.16.13.1		not-accessible	An entry in the lpJT2OperStatusTable.
INT lpJT2SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.16.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
lpJT2StateTable	1.3.6.1.4.1.562.2.4.1.12.16.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpJT2StateEntry	1.3.6.1.4.1.562.2.4.1.12.16.14.1		not-accessible	An entry in the lpJT2StateTable.
INT lpJT2AdminState	1.3.6.1.4.1.562.2.4.1.12.16.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpJT2OperationalState	1.3.6.1.4.1.562.2.4.1.12.16.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpJT2UsageState	1.3.6.1.4.1.562.2.4.1.12.16.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpJT2AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.16.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpJT2ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.16.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpJT2ControlStatus	1.3.6.1.4.1.562.2.4.1.12.16.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpJT2AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.16.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT lpJT2StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.16.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpJT2UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.16.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
lpJT2OperTable	1.3.6.1.4.1.562.2.4.1.12.16.15		not-accessible	This group contains the JT2 specific operational data for a JT2 component in a digital hierarchy interface.
lpJT2OperEntry	1.3.6.1.4.1.562.2.4.1.12.16.15.1		not-accessible	An entry in the lpJT2OperTable.
INT lpJT2LosAlarm	1.3.6.1.4.1.562.2.4.1.12.16.15.1.1	INTEGER	read-only	This attribute displays whether a LOS (Loss of Signal) alarm state is entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is declared at the JT2 line interface when the input data is zero for 20 - 32 clock cycles. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. An LOS failure alarm is cleared when the LOS defect is absent for a period of 10 seconds +/- 0.5 seconds. The JT2 port goes into an operationalState of disabled for the duration of the LOS alarm condition. While the port is in the LOS alarm state, the port also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT lpJT2LofAlarm	1.3.6.1.4.1.562.2.4.1.12.16.15.1.2	INTEGER	read-only	This attribute indicates whether a LOF (Loss of Frame) alarm state is entered. A LOF alarm state is entered when LOF defects are observed and accumulated for 2.5 seconds +/- 0.5 seconds or more. A LOF defect occurs when seven or more consecutive incorrect frame alignment patterns (4 multiframes) are received. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The LOF alarm is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled for the duration of the LOF alarm condition. While the port is in the LOF alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT lpJT2RxAisPhysicalAlarm	1.3.6.1.4.1.562.2.4.1.12.16.15.1.3	INTEGER	read-only	This attribute indicates whether a Physical AIS alarm state is entered. A Physical AIS alarm state is entered when a Physical AIS defect is observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. A Physical AIS defect is declared when the incoming signal has two or less zeros in a sequence of 3,156 bits (0.5 ms). If the physical AIS defects are intermittently occurring, the physical AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. A Physical AIS alarm is cleared when the Physical AIS defect is absent for a period of 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled until the AIS alarm condition is cleared. While the port is in the Physical AIS alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT lpJT2RxAisPayloadAlarm	1.3.6.1.4.1.562.2.4.1.12.16.15.1.4	INTEGER	read-only	This attribute indicates whether a Payload AIS alarm state is entered. A Payload AIS alarm state is entered when a Payload AIS defect persists for a period of 2.5 seconds +/- 0.5 seconds. A Payload AIS defect is declared when the incoming signal of the 6312 kbit/s frame payload (TS1 - TS96) has two or less zeros in a sequence of 3,072 bits (0.5 ms). If the payload AIS defects are intermittently occurring, the payload AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. A Payload AIS failure alarm is cleared when the Payload AIS defect is absent for a period of 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled until the AIS alarm condition is cleared. While the port is in the Payload AIS alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT lpJT2RxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.16.15.1.5	INTEGER	read-only	This attribute indicates whether a Received RAI alarm state is entered. A received RAI alarm state is entered when the RAI signal is detected on the incoming JT2 Line (when 16 or more consecutive RAI patterns of 1111111100000000 are received on the 4 kbit/s data channel (m-bits) within the framing bits of the JT2 frame). The JT2 port goes into an operationalState of Disabled until the RAI alarm condition is cleared. The RAI alarm is cleared when four or more consecutive non-RAI patterns (anything other than 1111111100000000) are received.
INT lpJT2TxAisPhysicalAlarm	1.3.6.1.4.1.562.2.4.1.12.16.15.1.6	INTEGER	read-only	This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the outgoing JT2 line. Currently the JT2 port only transmits a Physical AIS (no Payload AIS) on the outgoing JT2 line. Since there is no Idle signal defined for JT2, the AIS signal is transmitted when the JT2 port is in the operationalState of locked. The AIS signal may also be transmitted for diagnostic testing.
INT lpJT2TxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.16.15.1.7	INTEGER	read-only	This attribute indicates whether an RAI defect indication pattern is being sent on the out-going JT2 line. The RAI alarm pattern is transmitted in the 4 kbit/s data channel (m-bits) when the port detects a LOS, AIS or LOF alarm condition.
lpJT2StatsTable	1.3.6.1.4.1.562.2.4.1.12.16.16		not-accessible	This group contains the statistical data for a JT2 component in a digital hierarchy interface.
lpJT2StatsEntry	1.3.6.1.4.1.562.2.4.1.12.16.16.1		not-accessible	An entry in the lpJT2StatsTable.
C32 lpJT2RunningTime	1.3.6.1.4.1.562.2.4.1.12.16.16.1.1	Counter32	read-only	This attribute indicates the number of seconds since the JT2 component was activated and placed in an unlocked state or used for operational testing. All the other error counts that follow as well as each JT2 subcomponent's error counts can be updated when this count is active.
C32 lpJT2ErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.16.16.1.2	Counter32	read-only	This attribute indicates the number of seconds that the JT2 port has been in an error free state.
C32 lpJT2ErroredSec	1.3.6.1.4.1.562.2.4.1.12.16.16.1.3	Counter32	read-only	This attribute indicates the total number of errored seconds for the JT2 port. An errored second is declared when a second with one or more Code Violation Error events, or one or more LOF or LOS defects occur. A code violation error may be a cyclic redundancy check (CRC) error or a bipolar violation (BPV) error.
C32 lpJT2SevErroredSec	1.3.6.1.4.1.562.2.4.1.12.16.16.1.4	Counter32	read-only	This attribute indicates the total number of severely errored seconds for the JT2 port. A severely errored second occurs when a second with 255 or more Code Violation Error events or one or more LOF or LOS defects occur.
C32 lpJT2SevErroredFrmSec	1.3.6.1.4.1.562.2.4.1.12.16.16.1.5	Counter32	read-only	This attribute indicates the total number of severely errored framing seconds for the JT2 port. A severely errored framing second occurs when a second with one or more Framing Errors occur.
C32 lpJT2UnavailSec	1.3.6.1.4.1.562.2.4.1.12.16.16.1.6	Counter32	read-only	This attribute indicates the total number of seconds that the interface has been in an unavailable state. An unavailable state occurs at the onset of 10 consecutive Severely Errored Seconds. When the unavailable state is entered, the 10 Severely Errored Seconds are immediately transfered to the count of unavailableSeconds by incrementing the count of unavailSec by 10 and decrementing the count of sevErroredSec by 10. Whilst in the unavailable state, an unavailableSecond is counted for each SES or SEFS that occurs, and the count of SES and SEFS are both inhibited. The unavailable state is cleared at the onset of 10 consecutive seconds which are not Severely Errored Seconds.
C32 lpJT2BpvErrors	1.3.6.1.4.1.562.2.4.1.12.16.16.1.7	Counter32	read-only	This attribute indicates the total count of bipolar violations (BPV). A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line. The value of this attribute will wrap to zero when it reaches its maximum value.
C32 lpJT2CrcErrors	1.3.6.1.4.1.562.2.4.1.12.16.16.1.8	Counter32	read-only	This attribute indicates the total number of cyclic redundancy check (CRC-5) errors detected on the incoming JT2 line. The value of this attribute will wrap to 0 when its maximum value is reached.
C32 lpJT2FrameErrors	1.3.6.1.4.1.562.2.4.1.12.16.16.1.9	Counter32	read-only	This attribute indicates the total number of Framing Errors that have occured on the JT2 port. A Framing Error is an error in the framing bits. The value of this attribute will wrap to 0 when its maximum value is reached.
C32 lpJT2LosStateChanges	1.3.6.1.4.1.562.2.4.1.12.16.16.1.10	Counter32	read-only	This attribute indicates the total number of times that the incoming signal on the JT2 line has been lost. The value of this attribute will wrap to 0 when its maximum value is reached.
lpJT2AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.16.17		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpJT2AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.16.17.1		not-accessible	An entry in the lpJT2AdminInfoTable.
STR lpJT2Vendor	1.3.6.1.4.1.562.2.4.1.12.16.17.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpJT2CommentText	1.3.6.1.4.1.562.2.4.1.12.16.17.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
lpHssi	1.3.6.1.4.1.562.2.4.1.12.17
lpHssiRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.17.1		not-accessible	This entry controls the addition and deletion of lpHssi components.
lpHssiRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.17.1.1		not-accessible	A single entry in the table represents a single lpHssi component.
ROW lpHssiRowStatus	1.3.6.1.4.1.562.2.4.1.12.17.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpHssi components. These components can be added and deleted.
STR lpHssiComponentName	1.3.6.1.4.1.562.2.4.1.12.17.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpHssiStorageType	1.3.6.1.4.1.562.2.4.1.12.17.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpHssi tables.
I32 lpHssiIndex	1.3.6.1.4.1.562.2.4.1.12.17.1.1.10	Integer32	not-accessible	This variable represents the index for the lpHssi tables.
lpHssiTest	1.3.6.1.4.1.562.2.4.1.12.17.2
lpHssiTestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.17.2.1		not-accessible	This entry controls the addition and deletion of lpHssiTest components.
lpHssiTestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.17.2.1.1		not-accessible	A single entry in the table represents a single lpHssiTest component.
ROW lpHssiTestRowStatus	1.3.6.1.4.1.562.2.4.1.12.17.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpHssiTest components. These components cannot be added nor deleted.
STR lpHssiTestComponentName	1.3.6.1.4.1.562.2.4.1.12.17.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpHssiTestStorageType	1.3.6.1.4.1.562.2.4.1.12.17.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpHssiTest tables.
NON lpHssiTestIndex	1.3.6.1.4.1.562.2.4.1.12.17.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpHssiTest tables.
lpHssiTestStateTable	1.3.6.1.4.1.562.2.4.1.12.17.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpHssiTestStateEntry	1.3.6.1.4.1.562.2.4.1.12.17.2.10.1		not-accessible	An entry in the lpHssiTestStateTable.
INT lpHssiTestAdminState	1.3.6.1.4.1.562.2.4.1.12.17.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpHssiTestOperationalState	1.3.6.1.4.1.562.2.4.1.12.17.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpHssiTestUsageState	1.3.6.1.4.1.562.2.4.1.12.17.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
lpHssiTestSetupTable	1.3.6.1.4.1.562.2.4.1.12.17.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpHssiTestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1		not-accessible	An entry in the lpHssiTestSetupTable.
STR lpHssiTestPurpose	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT lpHssiTestType	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 lpHssiTestFrmSize	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT lpHssiTestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX lpHssiTestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 lpHssiTestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpHssiTestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpHssiTestDuration	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
lpHssiTestResultsTable	1.3.6.1.4.1.562.2.4.1.12.17.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpHssiTestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1		not-accessible	An entry in the lpHssiTestResultsTable.
C32 lpHssiTestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 lpHssiTestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT lpHssiTestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
NUM lpHssiTestBitsTx	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpHssiTestBytesTx	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpHssiTestFrmTx	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpHssiTestBitsRx	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpHssiTestBytesRx	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpHssiTestFrmRx	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpHssiTestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpHssiTestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
lpHssiProvTable	1.3.6.1.4.1.562.2.4.1.12.17.10		not-accessible	This group contains the specific provisioning data for a Hssi component.
lpHssiProvEntry	1.3.6.1.4.1.562.2.4.1.12.17.10.1		not-accessible	An entry in the lpHssiProvTable.
INT lpHssiLinkMode	1.3.6.1.4.1.562.2.4.1.12.17.10.1.1	INTEGER	read-write	This attribute defines the intended gender of the HSSI port. The actual gender of the port is determined by the hardware setup. In dte mode, the ta line signal is driven as specified by the attribute readyLineState when the HSSI port passes its diagnostics. The ta line signal is then driven as specified by the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signal ca is compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified input line states are observed. In dce mode, the Hssi component behaves similarly as when it is in dte mode. However, it will be driving the dce line signal (ca) and monitoring the dte line signal (ta) as specified by the attributes readyLineState and dataTransferLineState.
OCT lpHssiReadyLineState	1.3.6.1.4.1.562.2.4.1.12.17.10.1.2	OCTET STRING	read-write	This attribute specifies the line signal originating from the HSSI interface that will always be turned on, provided the HSSI interface passes it diagnostics. This set of signal is generally required for maintaining the connection. Note that both dte and dce signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the operational attribute actualLinkMode. See also linkMode. Description of bits: ca(0) ta(1)
OCT lpHssiDataTransferLineState	1.3.6.1.4.1.562.2.4.1.12.17.10.1.3	OCTET STRING	read-write	This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both dte and dce signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the operational attribute actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: ca(0) ta(1)
U32 lpHssiLineSpeed	1.3.6.1.4.1.562.2.4.1.12.17.10.1.5	Unsigned32	read-write	This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. Note that the actual clock rate are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed.
LIN lpHssiApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.17.10.1.7	Link	read-write	This attribute contains the component name of a Framer which is associated with the Hssi component.
lpHssiCidDataTable	1.3.6.1.4.1.562.2.4.1.12.17.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpHssiCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.17.11.1		not-accessible	An entry in the lpHssiCidDataTable.
U32 lpHssiCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.17.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
lpHssiAdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.17.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpHssiAdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.17.12.1		not-accessible	An entry in the lpHssiAdminInfoTable.
STR lpHssiVendor	1.3.6.1.4.1.562.2.4.1.12.17.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpHssiCommentText	1.3.6.1.4.1.562.2.4.1.12.17.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
lpHssiIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.17.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpHssiIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.17.13.1		not-accessible	An entry in the lpHssiIfEntryTable.
INT lpHssiIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.17.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM lpHssiIfIndex	1.3.6.1.4.1.562.2.4.1.12.17.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
lpHssiOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.17.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpHssiOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.17.14.1		not-accessible	An entry in the lpHssiOperStatusTable.
INT lpHssiSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.17.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
lpHssiStateTable	1.3.6.1.4.1.562.2.4.1.12.17.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpHssiStateEntry	1.3.6.1.4.1.562.2.4.1.12.17.15.1		not-accessible	An entry in the lpHssiStateTable.
INT lpHssiAdminState	1.3.6.1.4.1.562.2.4.1.12.17.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpHssiOperationalState	1.3.6.1.4.1.562.2.4.1.12.17.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpHssiUsageState	1.3.6.1.4.1.562.2.4.1.12.17.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpHssiAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.17.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpHssiProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.17.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpHssiControlStatus	1.3.6.1.4.1.562.2.4.1.12.17.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpHssiAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.17.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT lpHssiStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.17.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpHssiUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.17.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
lpHssiOperTable	1.3.6.1.4.1.562.2.4.1.12.17.16		not-accessible	This group contains all specific operational data for a Hssi component.
lpHssiOperEntry	1.3.6.1.4.1.562.2.4.1.12.17.16.1		not-accessible	An entry in the lpHssiOperTable.
INT lpHssiActualLinkMode	1.3.6.1.4.1.562.2.4.1.12.17.16.1.1	INTEGER	read-only	This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The port behaves as a dce or dte according to the actualLinkMode.
OCT lpHssiLineState	1.3.6.1.4.1.562.2.4.1.12.17.16.1.2	OCTET STRING	read-only	This attribute contains the state of the interface signals. Description of bits: ca(0) ta(1) tm(2) la(3) lb(4)
G32 lpHssiActualTxLineSpeed	1.3.6.1.4.1.562.2.4.1.12.17.16.1.3	Gauge32	read-only	This attribute is the measured speed of the transmit clock. Note the reported transmit speed is in an error of +/- 10000 bit/s
G32 lpHssiActualRxLineSpeed	1.3.6.1.4.1.562.2.4.1.12.17.16.1.4	Gauge32	read-only	This attribute is the measured speed of the receive clock. Note the reported receive speed is in an error of +/- 10000 bit/s
C32 lpHssiDataXferStateChanges	1.3.6.1.4.1.562.2.4.1.12.17.16.1.5	Counter32	read-only	This attribute contains the number of times that the line has entered or exited the data transfer state.
lpEng	1.3.6.1.4.1.562.2.4.1.12.23
lpEngRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.23.1		not-accessible	This entry controls the addition and deletion of lpEng components.
lpEngRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.23.1.1		not-accessible	A single entry in the table represents a single lpEng component.
ROW lpEngRowStatus	1.3.6.1.4.1.562.2.4.1.12.23.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpEng components. These components cannot be added nor deleted.
STR lpEngComponentName	1.3.6.1.4.1.562.2.4.1.12.23.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpEngStorageType	1.3.6.1.4.1.562.2.4.1.12.23.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpEng tables.
NON lpEngIndex	1.3.6.1.4.1.562.2.4.1.12.23.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpEng tables.
lpEngDs	1.3.6.1.4.1.562.2.4.1.12.23.2
lpEngDsRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.23.2.1		not-accessible	This entry controls the addition and deletion of lpEngDs components.
lpEngDsRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.23.2.1.1		not-accessible	A single entry in the table represents a single lpEngDs component.
ROW lpEngDsRowStatus	1.3.6.1.4.1.562.2.4.1.12.23.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpEngDs components. These components can be added and deleted.
STR lpEngDsComponentName	1.3.6.1.4.1.562.2.4.1.12.23.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpEngDsStorageType	1.3.6.1.4.1.562.2.4.1.12.23.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpEngDs tables.
INT lpEngDsIndex	1.3.6.1.4.1.562.2.4.1.12.23.2.1.1.10	INTEGER	not-accessible	This variable represents the index for the lpEngDs tables.
lpEngDsOv	1.3.6.1.4.1.562.2.4.1.12.23.2.2
lpEngDsOvRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.23.2.2.1		not-accessible	This entry controls the addition and deletion of lpEngDsOv components.
lpEngDsOvRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1		not-accessible	A single entry in the table represents a single lpEngDsOv component.
ROW lpEngDsOvRowStatus	1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpEngDsOv components. These components can be added and deleted.
STR lpEngDsOvComponentName	1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO lpEngDsOvStorageType	1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpEngDsOv tables.
NON lpEngDsOvIndex	1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpEngDsOv tables.
lpEngDsOvProvTable	1.3.6.1.4.1.562.2.4.1.12.23.2.2.10		not-accessible	This group contains provisionable attributes for the DataStream Ov components under Lp Engineering. DESCRIPTION
lpEngDsOvProvEntry	1.3.6.1.4.1.562.2.4.1.12.23.2.2.10.1		not-accessible	An entry in the lpEngDsOvProvTable.
U32 lpEngDsOvAgentQueueSize	1.3.6.1.4.1.562.2.4.1.12.23.2.2.10.1.1	Unsigned32	read-write	This attribute specifies the maximum size of the DCS Agent's queue for this data stream on this LP. For more details on the defaults and other information, refer to the parent component's agentQueueSize attribute. The size should be set to 0 if absolutely no data is to be accepted from applications. There are threshold alarms based on the value of the Agent's currentQueueSize attribute (a Set when the queue becomes 75% full and a Clear after dropping back to 50% full). To properly determine what to set this to, consult the 'Magellan Passport Engineering Notes and Guidelines'.
lpEngDsOperTable	1.3.6.1.4.1.562.2.4.1.12.23.2.10		not-accessible	This group contains operational attributes for the DataStream components under Lp Engineering.
lpEngDsOperEntry	1.3.6.1.4.1.562.2.4.1.12.23.2.10.1		not-accessible	An entry in the lpEngDsOperTable.
U32 lpEngDsAgentQueueSize	1.3.6.1.4.1.562.2.4.1.12.23.2.10.1.1	Unsigned32	read-only	This attribute indicates the maximum size of the DCS Agent queue size maximum for a DCS data stream on the LP. It is the maximum size to which the Agent's currentQueueSize can grow. When the queue is full and more data is offered to the Agent, it will be discarded. The following are the system defaults (in number of records): - alarm: 100 - accounting: 10000 - debug: 0 - log: 50 - scn: 200 - trap: 50 - stats: 0 To override the system defaults, see Lp Eng Ds Ov's agentQueueSize attribute.
lpProvTable	1.3.6.1.4.1.562.2.4.1.12.100		not-accessible	This Group contains the provisionable attributes for the LP component.
lpProvEntry	1.3.6.1.4.1.562.2.4.1.12.100.1		not-accessible	An entry in the lpProvTable.
LIN lpMainCard	1.3.6.1.4.1.562.2.4.1.12.100.1.1	Link	read-write	This is the preferred processor card on which this LP should be assigned.
LIN lpSpareCard	1.3.6.1.4.1.562.2.4.1.12.100.1.2	Link	read-write	This is the spare processor card on which this LP should be assigned.
LIN lpLogicalProcessorType	1.3.6.1.4.1.562.2.4.1.12.100.1.3	Link	read-write	This is the Logical Processor Type (LPT) that determines which software this LP will run.
lpCidDataTable	1.3.6.1.4.1.562.2.4.1.12.101		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.101.1		not-accessible	An entry in the lpCidDataTable.
U32 lpCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.101.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
lpStateTable	1.3.6.1.4.1.562.2.4.1.12.102		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpStateEntry	1.3.6.1.4.1.562.2.4.1.12.102.1		not-accessible	An entry in the lpStateTable.
INT lpAdminState	1.3.6.1.4.1.562.2.4.1.12.102.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpOperationalState	1.3.6.1.4.1.562.2.4.1.12.102.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpUsageState	1.3.6.1.4.1.562.2.4.1.12.102.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT lpAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.102.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.102.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpControlStatus	1.3.6.1.4.1.562.2.4.1.12.102.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.102.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT lpStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.102.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.102.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
lpOperTable	1.3.6.1.4.1.562.2.4.1.12.103		not-accessible	This Group contains the operational attributes for the LP component.
lpOperEntry	1.3.6.1.4.1.562.2.4.1.12.103.1		not-accessible	An entry in the lpOperTable.
NUM lpActiveCard	1.3.6.1.4.1.562.2.4.1.12.103.1.1	RowPointer	read-only	This attribute indicates on which card this LP is currently running (if any).
INT lpMainCardStatus	1.3.6.1.4.1.562.2.4.1.12.103.1.2	INTEGER	read-only	This attribute specifies the status of this LP's main card. The following values have been defined: notProvisioned No main card has been provisioned notAvailable The main card is not available available The main card is available (running as standby) active The main card is running as active
INT lpSpareCardStatus	1.3.6.1.4.1.562.2.4.1.12.103.1.3	INTEGER	read-only	This attribute specifies the status of this LP's spare card. The following values have been defined: notProvisioned No spare card has been provisioned notAvailable The spare card is not available alreadyInUse The spare card is already in use by another LP available The spare card is available (running as standby) active The spare card is running as active
INT lpRestartOnCpSwitch	1.3.6.1.4.1.562.2.4.1.12.103.1.4	INTEGER	read-only	This attribute indicates whether the Lp always restarts upon a CP switchover. The value is true if the featureList of the associated Sw Lpt component contains a feature that does not support hitless CP switchover. The value is also true when the feature noHitlessCpSwitch is provisioned on the CP. A value of false does not guarantee 'no restart'; dynamic conditions may still result in an FP restart when a CP switchover occurs.
ENT lpScheduledSwitchover	1.3.6.1.4.1.562.2.4.1.12.103.1.5	EnterpriseDateAndTime	read-only	This attribute indicates the execution time of the scheduled switchover. When there is no switchover scheduled the time is equals to 0 (0000-00-00 00:00).
lpUtilTable	1.3.6.1.4.1.562.2.4.1.12.104		not-accessible	This group contains the operational attributes that specify the processor's utilization levels. When this group exists for an LP component, the attributes are representative of the active card.
lpUtilEntry	1.3.6.1.4.1.562.2.4.1.12.104.1		not-accessible	An entry in the lpUtilTable.
U32 lpTimeInterval	1.3.6.1.4.1.562.2.4.1.12.104.1.1	Unsigned32	read-only	This attribute indicates the time period (in minutes) for which the average, minimum and maximum utilization values are calculated. This attribute is reset to 0 every 15 minutes.
G32 lpCpuUtil	1.3.6.1.4.1.562.2.4.1.12.104.1.2	Gauge32	read-only	This attribute indicates an approximation of the current processor utilization level (expressed as a percentage).
G32 lpCpuUtilAvg	1.3.6.1.4.1.562.2.4.1.12.104.1.3	Gauge32	read-only	This attribute indicates an average processor utilization level over the specified time period, timeInterval. This average is calculated based on one minute CPU utilization averages.
G32 lpCpuUtilAvgMin	1.3.6.1.4.1.562.2.4.1.12.104.1.4	Gauge32	read-only	This attribute indicates the minimum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averages.
G32 lpCpuUtilAvgMax	1.3.6.1.4.1.562.2.4.1.12.104.1.5	Gauge32	read-only	This attribute indicates the maximum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averages.
G32 lpMsgBlockUsage	1.3.6.1.4.1.562.2.4.1.12.104.1.6	Gauge32	read-only	This attribute indicates the processor's current shared message block memory utilization (in kilobytes). If there is no shared memory on the card, this attribute indicates 0.
G32 lpMsgBlockUsageAvg	1.3.6.1.4.1.562.2.4.1.12.104.1.7	Gauge32	read-only	This attribute indicates the processor's average memory utilization (in kilobytes) of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this average memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
G32 lpMsgBlockUsageAvgMin	1.3.6.1.4.1.562.2.4.1.12.104.1.8	Gauge32	read-only	This attribute indicates the processor's minimum memory utilization (in kilobytes) of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this minimum memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
G32 lpMsgBlockUsageAvgMax	1.3.6.1.4.1.562.2.4.1.12.104.1.9	Gauge32	read-only	This attribute indicates the processor's maximum memory utilization (in kilobytes) of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this maximum memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
G32 lpLocalMsgBlockUsage	1.3.6.1.4.1.562.2.4.1.12.104.1.10	Gauge32	read-only	This attribute indicates the processor's current memory utilization (in kilobytes) of message blocks which are used for local messaging on the card.
G32 lpLocalMsgBlockUsageAvg	1.3.6.1.4.1.562.2.4.1.12.104.1.11	Gauge32	read-only	This attribute indicates the processor's average memory utilization (in kilobytes) of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this average memory utilization is reset to the current usage, localMsgBlockUsage.
G32 lpLocalMsgBlockUsageMin	1.3.6.1.4.1.562.2.4.1.12.104.1.12	Gauge32	read-only	This attribute indicates the processor's minimum memory utilization (in kilobytes) of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is updated at 15 second intervals. At the start of each timeInterval, this minimum memory utilization is reset to the current usage, localMsgBlockUsage.
G32 lpLocalMsgBlockUsageMax	1.3.6.1.4.1.562.2.4.1.12.104.1.13	Gauge32	read-only	This attribute indicates the processor's maximum memory utilization (in kilobytes) of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is updated at 15 second intervals. At the start of each timeInterval, this maximum memory utilization is reset to the current usage, localMsgBlockUsage.
lpCapTable	1.3.6.1.4.1.562.2.4.1.12.105		not-accessible	This group contains the operational attributes that specify the processor's capacity levels. When this group exists for an LP component, the attributes are representative of the active Card.
lpCapEntry	1.3.6.1.4.1.562.2.4.1.12.105.1		not-accessible	An entry in the lpCapTable.
U32 lpMsgBlockCapacity	1.3.6.1.4.1.562.2.4.1.12.105.1.1	Unsigned32	read-only	This attribute indicates the processor card's shared message block memory capacity (in kilobytes).
U32 lpLocalMsgBlockCapacity	1.3.6.1.4.1.562.2.4.1.12.105.1.2	Unsigned32	read-only	This attribute indicates the processor card's local message block memory capacity (in kilobytes). These message blocks are used for local messaging on the card.
lpLinkToApplicationsTable	1.3.6.1.4.1.562.2.4.1.12.242		not-accessible	This attribute allows applications to link themselves directly to the LP component.
lpLinkToApplicationsEntry	1.3.6.1.4.1.562.2.4.1.12.242.1		not-accessible	An entry in the lpLinkToApplicationsTable.
LIN lpLinkToApplicationsValue	1.3.6.1.4.1.562.2.4.1.12.242.1.1	Link	read-only	This variable represents both the value and the index for the lpLinkToApplicationsTable.
lpMemoryCapacityTable	1.3.6.1.4.1.562.2.4.1.12.244		not-accessible	This attribute indicates the processor card's memory capacity (in kilobytes) for each type of memory.
lpMemoryCapacityEntry	1.3.6.1.4.1.562.2.4.1.12.244.1		not-accessible	An entry in the lpMemoryCapacityTable.
INT lpMemoryCapacityIndex	1.3.6.1.4.1.562.2.4.1.12.244.1.1	INTEGER	not-accessible	This variable represents the lpMemoryCapacityTable specific index for the lpMemoryCapacityTable.
U32 lpMemoryCapacityValue	1.3.6.1.4.1.562.2.4.1.12.244.1.2	Unsigned32	read-only	This variable represents an individual value for the lpMemoryCapacityTable.
lpMemoryUsageTable	1.3.6.1.4.1.562.2.4.1.12.245		not-accessible	This attribute indicates the processor's current memory utilization (in kilobytes) for each type of memory.
lpMemoryUsageEntry	1.3.6.1.4.1.562.2.4.1.12.245.1		not-accessible	An entry in the lpMemoryUsageTable.
INT lpMemoryUsageIndex	1.3.6.1.4.1.562.2.4.1.12.245.1.1	INTEGER	not-accessible	This variable represents the lpMemoryUsageTable specific index for the lpMemoryUsageTable.
G32 lpMemoryUsageValue	1.3.6.1.4.1.562.2.4.1.12.245.1.2	Gauge32	read-only	This variable represents an individual value for the lpMemoryUsageTable.
lpMemoryUsageAvgTable	1.3.6.1.4.1.562.2.4.1.12.276		not-accessible	This attribute indicates the processor's average memory utilization (in kilobytes) for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
lpMemoryUsageAvgEntry	1.3.6.1.4.1.562.2.4.1.12.276.1		not-accessible	An entry in the lpMemoryUsageAvgTable.
INT lpMemoryUsageAvgIndex	1.3.6.1.4.1.562.2.4.1.12.276.1.1	INTEGER	not-accessible	This variable represents the lpMemoryUsageAvgTable specific index for the lpMemoryUsageAvgTable.
G32 lpMemoryUsageAvgValue	1.3.6.1.4.1.562.2.4.1.12.276.1.2	Gauge32	read-only	This variable represents an individual value for the lpMemoryUsageAvgTable.
lpMemoryUsageAvgMinTable	1.3.6.1.4.1.562.2.4.1.12.277		not-accessible	This attribute indicates the processor's minimum memory utilization (in kilobytes) for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
lpMemoryUsageAvgMinEntry	1.3.6.1.4.1.562.2.4.1.12.277.1		not-accessible	An entry in the lpMemoryUsageAvgMinTable.
INT lpMemoryUsageAvgMinIndex	1.3.6.1.4.1.562.2.4.1.12.277.1.1	INTEGER	not-accessible	This variable represents the lpMemoryUsageAvgMinTable specific index for the lpMemoryUsageAvgMinTable.
G32 lpMemoryUsageAvgMinValue	1.3.6.1.4.1.562.2.4.1.12.277.1.2	Gauge32	read-only	This variable represents an individual value for the lpMemoryUsageAvgMinTable.
lpMemoryUsageAvgMaxTable	1.3.6.1.4.1.562.2.4.1.12.278		not-accessible	This attribute indicates the processor's maximum memory utilization (in kilobytes) for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
lpMemoryUsageAvgMaxEntry	1.3.6.1.4.1.562.2.4.1.12.278.1		not-accessible	An entry in the lpMemoryUsageAvgMaxTable.
INT lpMemoryUsageAvgMaxIndex	1.3.6.1.4.1.562.2.4.1.12.278.1.1	INTEGER	not-accessible	This variable represents the lpMemoryUsageAvgMaxTable specific index for the lpMemoryUsageAvgMaxTable.
G32 lpMemoryUsageAvgMaxValue	1.3.6.1.4.1.562.2.4.1.12.278.1.2	Gauge32	read-only	This variable represents an individual value for the lpMemoryUsageAvgMaxTable.
logicalProcessorMIB	1.3.6.1.4.1.562.2.4.2.11
logicalProcessorGroup	1.3.6.1.4.1.562.2.4.2.11.1
logicalProcessorGroupBE	1.3.6.1.4.1.562.2.4.2.11.1.5
logicalProcessorGroupBE01	1.3.6.1.4.1.562.2.4.2.11.1.5.2
logicalProcessorGroupBE01A	1.3.6.1.4.1.562.2.4.2.11.1.5.2.2
logicalProcessorCapabilities	1.3.6.1.4.1.562.2.4.2.11.3
logicalProcessorCapabilitiesBE	1.3.6.1.4.1.562.2.4.2.11.3.5
logicalProcessorCapabilitiesBE01	1.3.6.1.4.1.562.2.4.2.11.3.5.2
logicalProcessorCapabilitiesBE01A	1.3.6.1.4.1.562.2.4.2.11.3.5.2.2

AsciiString (59)
STR lpDS1ChanCommentText	1.3.6.1.4.1.562.2.4.1.12.7.2.16.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpDS1ChanTestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpDS1ChanTestPurpose	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR lpDS1ChanVendor	1.3.6.1.4.1.562.2.4.1.12.7.2.16.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpDS1CommentText	1.3.6.1.4.1.562.2.4.1.12.7.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpDS1TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpDS1TestPurpose	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR lpDS1Vendor	1.3.6.1.4.1.562.2.4.1.12.7.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpDS3CommentText	1.3.6.1.4.1.562.2.4.1.12.5.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpDS3DS1ChanCommentText	1.3.6.1.4.1.562.2.4.1.12.5.6.2.16.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpDS3DS1ChanTestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpDS3DS1ChanTestPurpose	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR lpDS3DS1ChanVendor	1.3.6.1.4.1.562.2.4.1.12.5.6.2.16.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpDS3DS1CommentText	1.3.6.1.4.1.562.2.4.1.12.5.6.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpDS3DS1TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpDS3DS1TestPurpose	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR lpDS3DS1Vendor	1.3.6.1.4.1.562.2.4.1.12.5.6.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpDS3TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpDS3TestPurpose	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR lpDS3Vendor	1.3.6.1.4.1.562.2.4.1.12.5.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpE1ChanCommentText	1.3.6.1.4.1.562.2.4.1.12.8.2.16.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpE1ChanTestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpE1ChanTestPurpose	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR lpE1ChanVendor	1.3.6.1.4.1.562.2.4.1.12.8.2.16.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpE1CommentText	1.3.6.1.4.1.562.2.4.1.12.8.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpE1TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpE1TestPurpose	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR lpE1Vendor	1.3.6.1.4.1.562.2.4.1.12.8.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpE3CommentText	1.3.6.1.4.1.562.2.4.1.12.6.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpE3G832TrailTraceExpected	1.3.6.1.4.1.562.2.4.1.12.6.3.10.1.2	AsciiString	read-write	This attribute indicates the E.164 address which is expected in the trail access point identifier, which is transmitted using the Trail Trace (TR) field of the transmitted E3 Frame. Both the expected trail access point identifier and the transmitted trail access point identifier are provisionable attributes of the G832 component. The 16 byte Trail Trace frame is composed of one byte containing a frame start marker and a CRC-7 calculation over the previous frame, and 15 bytes for transporting an E.164 address. If less than the full 15 bytes are used, the address is padded with NULL characters.
STR lpE3G832TrailTraceReceived	1.3.6.1.4.1.562.2.4.1.12.6.3.11.1.4	AsciiString	read-only	This attribute indicates the 15 byte E.164 address which is currently being received in the trail trace (TR) field of the E3 G832 frame. If this attribute differs from the provisioned trailTraceTransmitted string a trail trace mismatch (TTM) defect is reported, possibly resulting in a TTM alarm, as described for operational attribute trailTraceMismatch.
STR lpE3G832TrailTraceTransmitted	1.3.6.1.4.1.562.2.4.1.12.6.3.10.1.1	AsciiString	read-write	This attribute indicates the E.164 address which is to be encoded in the trail access point identifier, which is transmitted using the Trail Trace (TR) field of the transmitted E3 Frame. Both the expected trail access point identifier and the transmitted trail access point identifier are provisionable attributes of the G832 component. The 16 byte Trail Trace frame is composed of one byte containing a frame start marker and a CRC-7 calculation over the previous frame, and 15 bytes for transporting an E.164 address. If less than the full 15 bytes are used, the address is padded with NULL characters.
STR lpE3TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpE3TestPurpose	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR lpE3Vendor	1.3.6.1.4.1.562.2.4.1.12.6.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpHssiCommentText	1.3.6.1.4.1.562.2.4.1.12.17.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpHssiTestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpHssiTestPurpose	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR lpHssiVendor	1.3.6.1.4.1.562.2.4.1.12.17.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpJT2CommentText	1.3.6.1.4.1.562.2.4.1.12.16.17.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpJT2TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpJT2TestPurpose	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR lpJT2Vendor	1.3.6.1.4.1.562.2.4.1.12.16.17.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpSdhCommentText	1.3.6.1.4.1.562.2.4.1.12.15.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpSdhTestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpSdhTestPurpose	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR lpSdhVendor	1.3.6.1.4.1.562.2.4.1.12.15.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpSonetCommentText	1.3.6.1.4.1.562.2.4.1.12.14.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpSonetTestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpSonetTestPurpose	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR lpSonetVendor	1.3.6.1.4.1.562.2.4.1.12.14.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpV35CommentText	1.3.6.1.4.1.562.2.4.1.12.9.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpV35TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpV35TestPurpose	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR lpV35Vendor	1.3.6.1.4.1.562.2.4.1.12.9.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR lpX21CommentText	1.3.6.1.4.1.562.2.4.1.12.10.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR lpX21TestBitErrorRate	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.11	AsciiString	read-only	This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
STR lpX21TestPurpose	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR lpX21Vendor	1.3.6.1.4.1.562.2.4.1.12.10.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
Counter32 (218)
C32 lpDS1BpvErrors	1.3.6.1.4.1.562.2.4.1.12.7.17.1.7	Counter32	read-only	The current count of Bipolar Violations. A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line.
C32 lpDS1ChanCellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
C32 lpDS1ChanCellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
C32 lpDS1ChanCellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 lpDS1ChanTestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 lpDS1CrcErrors	1.3.6.1.4.1.562.2.4.1.12.7.17.1.8	Counter32	read-only	If the interface is a DS1 line, it is the current count of CRC-6 errors. These will only be counted when the lineType is ESF. If the interface is an E1 line, it is the total number of CRC-4 errors. These will only be counted when crc4Mode is on.
C32 lpDS1ErroredSec	1.3.6.1.4.1.562.2.4.1.12.7.17.1.3	Counter32	read-only	An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
C32 lpDS1ErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.7.17.1.2	Counter32	read-only	The number of seconds that the port has been in an error free state.
C32 lpDS1FrmErrors	1.3.6.1.4.1.562.2.4.1.12.7.17.1.9	Counter32	read-only	The current count of frame errors. A frame error is an error in the framing bits
C32 lpDS1LosStateChanges	1.3.6.1.4.1.562.2.4.1.12.7.17.1.10	Counter32	read-only	The total number of times that the line lost signal.
C32 lpDS1RunningTime	1.3.6.1.4.1.562.2.4.1.12.7.17.1.1	Counter32	read-only	The number of seconds since the port component was activated.
C32 lpDS1SevErroredFrmSec	1.3.6.1.4.1.562.2.4.1.12.7.17.1.5	Counter32	read-only	A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
C32 lpDS1SevErroredSec	1.3.6.1.4.1.562.2.4.1.12.7.17.1.4	Counter32	read-only	A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
C32 lpDS1SlipErrors	1.3.6.1.4.1.562.2.4.1.12.7.17.1.11	Counter32	read-only	The total number of times that the line experienced a controlled frame slip. This attribute is incremented for ports on the voice cards (for example the 1pDS1V and the 1pE1V function processors) only.
C32 lpDS1TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 lpDS1UnavailSec	1.3.6.1.4.1.562.2.4.1.12.7.17.1.6	Counter32	read-only	The total number of seconds that the interface is in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
C32 lpDS3CBitCbitCodeViolations	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.2	Counter32	read-only	This attribute indicates the total count of C-Bit Parity Code Violations (CCV). A CCV is obtained when the parity calculated over the previous DS3 frame and the value of the CP-bits appearing in the current DS3 frame differ. The value of this attribute will wrap around to 0 if it does reach its maximum value. CCV counting is inhibited for second intervals where C-Bit Parity Severely Errored Seconds (CSES) are counted. It is also inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3CBitCbitErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.3	Counter32	read-only	This attribute indicates the total number of C-Bit Parity Errored Seconds (CES). A CES second is declared for second intervals containing one or more CCVs or when one or more SEF (Severely Errored Frame) or AIS (Alarm Indication Signal) defects. CES counting is inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted.
C32 lpDS3CBitCbitErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.1	Counter32	read-only	This attribute indicates the number of seconds that the DS3 port has not suffered any C-Bit errors.
C32 lpDS3CBitCbitSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.4	Counter32	read-only	This attribute indicates the total number of C-Bit Parity Severely Errored Seconds (CSES). A CSES is declared for second intervals containing more than 44 CCVs or one or more SEF or AIS defects. The occurrence of CSES in a one second interval causes the inhibition of CCV counting during that second interval. CSES counting is also inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted.
C32 lpDS3CBitCbitUnavailSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.5	Counter32	read-only	This attribute indicates the total number of one second intervals for which the DS3 path is unavailable. The DS3 path becomes unavailable at the onset of 10 consecutive C-Bit Severely Errored Seconds (CSES). The 10 CSESs are included in the unavailable time. Once unavailable, the DS3 path becomes available at the onset of 10 contiguous seconds with no CSES. The 10 seconds with no CSES are excluded from the unavailable time. For second intervals where CUAS is counted, counting of C-Bit Coding Violations (CCV), C-Bit Errored Seconds (CES) and C-Bit Severely Errored Seconds (CSES) is inhibited.
C32 lpDS3CBitFarEndCodeViolations	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.7	Counter32	read-only	This attribute indicates the total count of DS3 frames containing a Coding Violation on the Far-End (FECV), also known as a Far-End Block Error (FEBE). Each FEBE is reported over the FEBE bits each time the far-end DS3 terminal detects a C-BIT Parity error over a received DS3 frame. For second intervals where Far-End Unavailable Seconds (FEAUS) or Far-End Severely Errored Seconds (FESES) are counted, counting of FECVs is inhibited. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3CBitFarEndErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.8	Counter32	read-only	This attribute indicates the total number of Far-End Errored Seconds (FEES). A FEES is declared for second intervals containing with one or more FECVs or one or more far-end SEF/ AIS defects. A far-end SEF/AIS defect occurs when the X-Bits of the DS3 frame are received as being set to zero. For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FEESs is inhibited.
C32 lpDS3CBitFarEndErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.6	Counter32	read-only	This attribute indicates the number of seconds that the DS3 port has not suffered of any far-end errors.
C32 lpDS3CBitFarEndFailures	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.12	Counter32	read-only	This attribute indicates the total number of times that a far-end path failure (i.e. a Far-End SEF/AIS defect) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3CBitFarEndSefAisSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.10	Counter32	read-only	This attribute indicates the total number of Far-End SEF/AIS Seconds (FESAS). A FESAS is declared for second intervals containing one or more far-end SEF/AIS defects.For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FESASs is inhibited.
C32 lpDS3CBitFarEndSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.9	Counter32	read-only	This attribute indicates the total number of Far-End Severely Errored Seconds (FESES). A FESES is declared for second intervals containing more than 44 FECVs or one or more far-end SEF/AIS defects. For second intervals where a FESES is counted, counting of FECVs is inhibited. For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FESESs is inhibited.
C32 lpDS3CBitFarEndUnavailSec	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.11	Counter32	read-only	This attribute indicates the total number of one second intervals for which the DS3 far-end path is unavailable. The DS3 far-end path becomes unavailable at the onset of 10 consecutive Far-End Severely Errored Seconds (FESES). The 10 FESESs are included in the unavailable time. Once unavailable, the DS3 far-end path becomes available at the onset of 10 contiguous seconds with no FESES. The 10 seconds with no FESES are excluded from the unavailable time. For second intervals where FEUAS is counted, counting of Far-End Coding Violations (FECV), Far-End Errored Seconds (FEES), Far-End Severely Errored Seconds (FESES) and Far-End Sef/Ais Seconds (FESAS) is inhibited.
C32 lpDS3CellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
C32 lpDS3CellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
C32 lpDS3CellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 lpDS3DS1ChanCellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
C32 lpDS3DS1ChanCellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
C32 lpDS3DS1ChanCellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 lpDS3DS1ChanTestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 lpDS3DS1CrcErrors	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.7	Counter32	read-only	This attribute counts the total number of CRC-6 errors. These will only be counted when the lineType is esf.
C32 lpDS3DS1ErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.3	Counter32	read-only	This attribute counts the number of errored seconds the tributary has counted since it was activated. An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
C32 lpDS3DS1ErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.2	Counter32	read-only	This attribute counts the number of seconds that the tributary has been in an error free state.
C32 lpDS3DS1FrmErrors	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.8	Counter32	read-only	This attribute counts the total number of frame errors. A frame error is an error in the framing bits.
C32 lpDS3DS1RunningTime	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.1	Counter32	read-only	This attribute counts the number of seconds since the tributary was activated.
C32 lpDS3DS1SevErroredFrmSec	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.5	Counter32	read-only	This attribute counts the number of severely errored framing seconds the tributary has counted since it was activated A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
C32 lpDS3DS1SevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.4	Counter32	read-only	This attribute counts the number of severely errored seconds the tributary has counted since it was activated. A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
C32 lpDS3DS1SlipErrors	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.9	Counter32	read-only	The total number of times that the line experienced a controlled frame slip.
C32 lpDS3DS1TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 lpDS3DS1UnavailSec	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.6	Counter32	read-only	This attribute counts the total number of seconds that the tributary has been in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
C32 lpDS3ErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the DS3 port has been in an error free state.
C32 lpDS3LineCodeViolations	1.3.6.1.4.1.562.2.4.1.12.5.17.1.3	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCV) detected. A DS3 Line Code Violation is a B3Zs error. LCV counting is inhibited for second intervals where Line Severely Errored Second (LSES) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3LineErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.4	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LES) that have been counted. A LES is declared for second intervals containing one or more LCV or one or more Loss Of Signal (LOS) defects.
C32 lpDS3LineFailures	1.3.6.1.4.1.562.2.4.1.12.5.17.1.7	Counter32	read-only	This attribute indicates the total number of times that a line failure (LOS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3LineLosSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.6	Counter32	read-only	This attribute indicates the total number of Line LOS Seconds (LOSS) that have been counted. A LOSS is declared for second intervals containing one or more LOS defects.
C32 lpDS3LineSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.5	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSES) that have been counted. A LSES is declared for second intervals containing more than 44 LCVs or one or more LOS defects.
C32 lpDS3PathCodeViolations	1.3.6.1.4.1.562.2.4.1.12.5.17.1.8	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a P-bit parity error, or possibly a frame error or a disagreement between P-bits or X-bits. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3PathErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.9	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of Path Errored Seconds is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 lpDS3PathFailures	1.3.6.1.4.1.562.2.4.1.12.5.17.1.13	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOF/AIS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3PathSefAisSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.11	Counter32	read-only	This attribute indicates the total number of SEF/AIS Seconds (PSASs). A PSAS is declared for second intervals containing one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSAS is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 lpDS3PathSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.10	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than 44 PCVs or one or more SEF or AIS defects. Counting of PSESs is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 lpDS3PathUnavailSec	1.3.6.1.4.1.562.2.4.1.12.5.17.1.12	Counter32	read-only	This attribute indicates the total number of one second intervals for which the DS3 path is unavailable. The DS3 path becomes unavailable at the onset of 10 consecutive Path Severely Errored Seconds (PSES). The 10 PSESs are included in the unavailable time. Once unavailable, the DS3 path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where PUAS is counted, counting of Path Coding Violations (PCV), Path Errored Seconds (PES), Path Severely Errored Seconds (PSES) and Path Sef/Ais Seconds (PSAS) is inhibited.
C32 lpDS3PlcpCodingViolations	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.2	Counter32	read-only	This attribute indicates the total number of BIP-8 Errors, framing pattern octet errors, and path overhead identification errors detected in received PLCP frames. Counting of PLCP CV is inhibited for second intervals where PLCP Severely Errored Framing Seconds (SEFS) or PLCP Unavailable Seconds (UAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3PlcpErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.3	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Coding Violations (CV) or in which a PLCP Severely Errored Framing Second (SEFS) was counted. Counting of PLCP ES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 lpDS3PlcpErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.1	Counter32	read-only	This attribute indicates the number of seconds during which the near-end PLCP path layer had no errors.
C32 lpDS3PlcpFarEndCodingViolations	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.8	Counter32	read-only	This attribute indicates the total number of PLCP Far-End Block Errors (FEBE) reported by the far-end terminal. Counting of FEBEs is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpDS3PlcpFarEndErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.9	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FEES is inhibited during second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 lpDS3PlcpFarEndErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.7	Counter32	read-only	This attribute indicates the number of seconds during which the far- end PLCP path layer had no errors.
C32 lpDS3PlcpFarEndSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.10	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FESES is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 lpDS3PlcpFarEndUnavailableSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.11	Counter32	read-only	This attribute indicates the number of seconds during which the PLCP far end is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP RAI (Remote Alarm Indication). Service becomes available again after this condition is cleared. For second intervals where PLCP FEUAS are counted, counting of PLCP Far-End Coding Violations (FECV), PLCP Far- End Errored Seconds (FEES), and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
C32 lpDS3PlcpSevErroredFramingSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.5	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Severely Errored Frame (SEF) events. An SEF event is equivalent to a PLCP OOF (Out of Frame) event. Counting of PLCPP SEFSs is inhibited for second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 lpDS3PlcpSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.4	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF event occurred). Counting of PLCP SES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 lpDS3PlcpUnavailSec	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.6	Counter32	read-only	This attribute indicates the number of seconds when the near-end PLCP layer is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP LOF (Loss of Frame) failure alarm state. The PLCP Path Layer becomes available again only after clearing this condition. For second intervals where PLCP UAS are counted, counting of PLCP Severely Errored Framing Seconds (SEFS), PLCP Coding Violations (CV), PLCP Errored Seconds (ES), PLCP Severely Errored Seconds (SES) and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
C32 lpDS3RunningTime	1.3.6.1.4.1.562.2.4.1.12.5.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the DS3 component has been activated and been in unlocked state or used for operational testing. All the other error counts that follow as well as each DS3 subcomponent's error counts can be updated when this count is active.
C32 lpDS3TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 lpE1BpvErrors	1.3.6.1.4.1.562.2.4.1.12.8.18.1.7	Counter32	read-only	The current count of Bipolar Violations. A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line.
C32 lpE1ChanCellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
C32 lpE1ChanCellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
C32 lpE1ChanCellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 lpE1ChanTestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 lpE1CrcErrors	1.3.6.1.4.1.562.2.4.1.12.8.18.1.8	Counter32	read-only	If the interface is a DS1 line, it is the current count of CRC-6 errors. These will only be counted when the lineType is ESF. If the interface is an E1 line, it is the total number of CRC-4 errors. These will only be counted when crc4Mode is on.
C32 lpE1ErroredSec	1.3.6.1.4.1.562.2.4.1.12.8.18.1.3	Counter32	read-only	An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
C32 lpE1ErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.8.18.1.2	Counter32	read-only	The number of seconds that the port has been in an error free state.
C32 lpE1FrmErrors	1.3.6.1.4.1.562.2.4.1.12.8.18.1.9	Counter32	read-only	The current count of frame errors. A frame error is an error in the framing bits
C32 lpE1LosStateChanges	1.3.6.1.4.1.562.2.4.1.12.8.18.1.10	Counter32	read-only	The total number of times that the line lost signal.
C32 lpE1RunningTime	1.3.6.1.4.1.562.2.4.1.12.8.18.1.1	Counter32	read-only	The number of seconds since the port component was activated.
C32 lpE1SevErroredFrmSec	1.3.6.1.4.1.562.2.4.1.12.8.18.1.5	Counter32	read-only	A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
C32 lpE1SevErroredSec	1.3.6.1.4.1.562.2.4.1.12.8.18.1.4	Counter32	read-only	A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
C32 lpE1SlipErrors	1.3.6.1.4.1.562.2.4.1.12.8.18.1.11	Counter32	read-only	The total number of times that the line experienced a controlled frame slip. This attribute is incremented for ports on the voice cards (for example the 1pDS1V and the 1pE1V function processors) only.
C32 lpE1TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 lpE1UnavailSec	1.3.6.1.4.1.562.2.4.1.12.8.18.1.6	Counter32	read-only	The total number of seconds that the interface is in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
C32 lpE3CellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
C32 lpE3CellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
C32 lpE3CellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 lpE3ErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the E3 port has been in an error free state.
C32 lpE3G832FarEndCodeViolations	1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.2	Counter32	read-only	A count of E3 frames containing a Far-End Block Error (FEBE). A FEBE is reported over the FEBE bit each time the far-end terminal detects a BIP-8 error in a received E3 frame. For second intervals where Far End Unavailable Seconds (FEUAS) or Far End Severely Errored Seconds (FESES) are counted, counting of FECVs is inhibited. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpE3G832FarEndErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.3	Counter32	read-only	This attribute indicates the total number of Far-End Errored Seconds (FEES). A FEES is declared for second intervals containing with one or more Far-End Coding Violations (FECV) or one or more Far-End Receive Failure (FERF) defects. A FERF defect occurs when the FERF bit in the received frame is set to one. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FEESs is inhibited.
C32 lpE3G832FarEndErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.1	Counter32	read-only	This attribute indicates the number of seconds that the E3 line has not suffered any G832 errors.
C32 lpE3G832FarEndSefAisSec	1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.5	Counter32	read-only	This attribute indicates the total number of Far-End SEF/AIS Seconds (FESAS). A FESAS is declared for second intervals containing one or more Far-End Receive Failure (FERF) defects. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FESAS is inhibited.
C32 lpE3G832FarEndSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.4	Counter32	read-only	This attribute indicates the total number of Far-End Severely Errored Seconds (FESESs). A FESES is declared for second intervals containing more than 34 Far-End Coding Violations (FECV) or one or more Far-End Receive Failure (FERF) defects. For second intervals where a Far-End Severely Errored Seconds (FESES) is counted, counting of FECVs is inhibited. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FESESs is inhibited.
C32 lpE3G832FarEndUnavailSec	1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.6	Counter32	read-only	This attribute indicates the total number of one second intervals for which the E3 far-end path is unavailable. The E3 far-end path becomes unavailable at the onset of 10 consecutive Far End Severely Errored Seconds (FESES). It comes available at the onset of 10 contiguous seconds with no FESES. The unavailable time includes the initial 10 seconds to enter the unavailable state but not the 10 seconds to exit the state For second intervals where FEUAS is counted, counting of Far End Coding Violations (FECV), Far- End Errored Seconds (FEES), Far-End Severely Errored Seconds (FESES) and Far-End SefAis Seconds (FESAS) are inhibited.
C32 lpE3LineCodeViolations	1.3.6.1.4.1.562.2.4.1.12.6.17.1.3	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCV) detected. An E3 Line Code Violation is an HDB3 coded signal error. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpE3LineErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.4	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LES) that have been counted. A LES is declared for interval seconds containing one or more Line Code Violations (LCV) or one or more Loss Of Signal (LOS) defects.
C32 lpE3LineFailures	1.3.6.1.4.1.562.2.4.1.12.6.17.1.7	Counter32	read-only	This attribute indicates the total number of times that a line failure (LOS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpE3LineLosSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.6	Counter32	read-only	This attribute indicates the total number of Line LOS Seconds (LOSS) that have been counted. A LOSS is declared for second intervals containing one or more Loss of Signal (LOS) defects.
C32 lpE3LineSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.5	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSES) that have been counted. A LSES is declared for second intervals containing more than 34 Line Code Violations (LCV) or one or more Loss of Signal (LOS) defects.
C32 lpE3PathCodeViolations	1.3.6.1.4.1.562.2.4.1.12.6.17.1.8	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCV) detected. An E3 PCV is an error in the Frame Alignment (FA) signal, or, in G.832 Framing Mode, an error in the Frame Alignment signal or a BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpE3PathErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.9	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PES) that have been counted. A PES is declared for second intervals containing one or more Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of Path Errored Seconds is inhibited when a Path Unavailable Second (PUAS) is counted over the monitored second.
C32 lpE3PathFailures	1.3.6.1.4.1.562.2.4.1.12.6.17.1.13	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOF/AIS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpE3PathSefAisSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.11	Counter32	read-only	This attribute indicates the total number of Path SEF/AIS Seconds (PSAS). A PSAS is declared for second intervals containing one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSAS is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 lpE3PathSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.10	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSES) that have been counted. A PSES is declared for second intervals containing more than 22 (G.751 E3) or 34 (G.832 E3) Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSESs is inhibited when a Path Unavailable Second (PUAS) is counted over the monitored second.
C32 lpE3PathUnavailSec	1.3.6.1.4.1.562.2.4.1.12.6.17.1.12	Counter32	read-only	This attribute indicates the total number of one second intervals for which the E3 path is unavailable. The E3 path becomes unavailable at the onset of 10 consecutive Path Severely Errored Seconds (PSES). The 10 PSESs are included in the unavailable time. Once unavailable, the E3 path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where PUAS is counted, counting of Path Code Violations (PCV), Path Errored Seconds (PES), Path Severely Errored Seconds (PSES) and Path SefAis Seconds (PSAS) is inhibited.
C32 lpE3PlcpCodingViolations	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.2	Counter32	read-only	This attribute indicates the total number of BIP-8 Errors, framing pattern octet errors, and path overhead identification errors detected in received PLCP frames. Counting of PLCP CV is inhibited for second intervals where PLCP Severely Errored Framing Seconds (SEFS) or PLCP Unavailable Seconds (UAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpE3PlcpErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.3	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Coding Violations (CV) or in which a PLCP Severely Errored Framing Second (SEFS) was counted. Counting of PLCP ES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 lpE3PlcpErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.1	Counter32	read-only	This attribute indicates the number of seconds during which the near-end PLCP path layer had no errors.
C32 lpE3PlcpFarEndCodingViolations	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.8	Counter32	read-only	This attribute indicates the total number of PLCP Far-End Block Errors (FEBE) reported by the far-end terminal. Counting of FEBEs is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 lpE3PlcpFarEndErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.9	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FEES is inhibited during second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 lpE3PlcpFarEndErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.7	Counter32	read-only	This attribute indicates the number of seconds during which the far- end PLCP path layer had no errors.
C32 lpE3PlcpFarEndSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.10	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FESES is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 lpE3PlcpFarEndUnavailableSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.11	Counter32	read-only	This attribute indicates the number of seconds during which the PLCP far end is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP RAI (Remote Alarm Indication). Service becomes available again after this condition is cleared. For second intervals where PLCP FEUAS are counted, counting of PLCP Far-End Coding Violations (FECV), PLCP Far- End Errored Seconds (FEES), and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
C32 lpE3PlcpSevErroredFramingSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.5	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Severely Errored Frame (SEF) events. An SEF event is equivalent to a PLCP OOF (Out of Frame) event. Counting of PLCPP SEFSs is inhibited for second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 lpE3PlcpSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.4	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF event occurred). Counting of PLCP SES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 lpE3PlcpUnavailSec	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.6	Counter32	read-only	This attribute indicates the number of seconds when the near-end PLCP layer is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP LOF (Loss of Frame) failure alarm state. The PLCP Path Layer becomes available again only after clearing this condition. For second intervals where PLCP UAS are counted, counting of PLCP Severely Errored Framing Seconds (SEFS), PLCP Coding Violations (CV), PLCP Errored Seconds (ES), PLCP Severely Errored Seconds (SES) and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
C32 lpE3RunningTime	1.3.6.1.4.1.562.2.4.1.12.6.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the E3 component has been activated and been in unlocked state or used for operational testing. All the other error counts that follow as well as each E3 subcomponent's error counts can be updated when this count is active.
C32 lpE3TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 lpHssiDataXferStateChanges	1.3.6.1.4.1.562.2.4.1.12.17.16.1.5	Counter32	read-only	This attribute contains the number of times that the line has entered or exited the data transfer state.
C32 lpHssiTestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 lpJT2BpvErrors	1.3.6.1.4.1.562.2.4.1.12.16.16.1.7	Counter32	read-only	This attribute indicates the total count of bipolar violations (BPV). A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line. The value of this attribute will wrap to zero when it reaches its maximum value.
C32 lpJT2CellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
C32 lpJT2CellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
C32 lpJT2CellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 lpJT2CrcErrors	1.3.6.1.4.1.562.2.4.1.12.16.16.1.8	Counter32	read-only	This attribute indicates the total number of cyclic redundancy check (CRC-5) errors detected on the incoming JT2 line. The value of this attribute will wrap to 0 when its maximum value is reached.
C32 lpJT2ErroredSec	1.3.6.1.4.1.562.2.4.1.12.16.16.1.3	Counter32	read-only	This attribute indicates the total number of errored seconds for the JT2 port. An errored second is declared when a second with one or more Code Violation Error events, or one or more LOF or LOS defects occur. A code violation error may be a cyclic redundancy check (CRC) error or a bipolar violation (BPV) error.
C32 lpJT2ErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.16.16.1.2	Counter32	read-only	This attribute indicates the number of seconds that the JT2 port has been in an error free state.
C32 lpJT2FrameErrors	1.3.6.1.4.1.562.2.4.1.12.16.16.1.9	Counter32	read-only	This attribute indicates the total number of Framing Errors that have occured on the JT2 port. A Framing Error is an error in the framing bits. The value of this attribute will wrap to 0 when its maximum value is reached.
C32 lpJT2LosStateChanges	1.3.6.1.4.1.562.2.4.1.12.16.16.1.10	Counter32	read-only	This attribute indicates the total number of times that the incoming signal on the JT2 line has been lost. The value of this attribute will wrap to 0 when its maximum value is reached.
C32 lpJT2RunningTime	1.3.6.1.4.1.562.2.4.1.12.16.16.1.1	Counter32	read-only	This attribute indicates the number of seconds since the JT2 component was activated and placed in an unlocked state or used for operational testing. All the other error counts that follow as well as each JT2 subcomponent's error counts can be updated when this count is active.
C32 lpJT2SevErroredFrmSec	1.3.6.1.4.1.562.2.4.1.12.16.16.1.5	Counter32	read-only	This attribute indicates the total number of severely errored framing seconds for the JT2 port. A severely errored framing second occurs when a second with one or more Framing Errors occur.
C32 lpJT2SevErroredSec	1.3.6.1.4.1.562.2.4.1.12.16.16.1.4	Counter32	read-only	This attribute indicates the total number of severely errored seconds for the JT2 port. A severely errored second occurs when a second with 255 or more Code Violation Error events or one or more LOF or LOS defects occur.
C32 lpJT2TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 lpJT2UnavailSec	1.3.6.1.4.1.562.2.4.1.12.16.16.1.6	Counter32	read-only	This attribute indicates the total number of seconds that the interface has been in an unavailable state. An unavailable state occurs at the onset of 10 consecutive Severely Errored Seconds. When the unavailable state is entered, the 10 Severely Errored Seconds are immediately transfered to the count of unavailableSeconds by incrementing the count of unavailSec by 10 and decrementing the count of sevErroredSec by 10. Whilst in the unavailable state, an unavailableSecond is counted for each SES or SEFS that occurs, and the count of SES and SEFS are both inhibited. The unavailable state is cleared at the onset of 10 consecutive seconds which are not Severely Errored Seconds.
C32 lpSdhErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an near-end error free state.
C32 lpSdhFarEndLineAisSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.19	Counter32	read-only	This attribute indicates the total number of Far-End Line AIS Seconds (FELAISSs) that have been counted. A FELAISS is declared for second intervals one or more L-RDI defects. Counting of FELAISS is inhibited over second intervals where a FELUAS is counted.
C32 lpSdhFarEndLineCodeViolations	1.3.6.1.4.1.562.2.4.1.12.15.17.1.16	Counter32	read-only	This attribute indicates the total number of line FEBE detected from the incoming line. The counting of line FEBE is inhibited for second intervals where a Far-End Line Severely Errored Second (FELSES) is counted. Counting of FELCVs is also inhibited over second intervals where a Far-End Line Unavailable Second (FELUAS) is counted. The count wraps at its maximum value.
C32 lpSdhFarEndLineErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.17	Counter32	read-only	This attribute indicates the total number of Far-End Line Errored Seconds (FELESs) that have been counted. A FELES is declared for second intervals containing one or more Far-End Line CVs (FELCVs) or one or more L-RDI defects. Counting of FELES is inhibited over second intervals where a FELUAS is counted.
C32 lpSdhFarEndLineErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.15	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an far-end error free state.
C32 lpSdhFarEndLineFailures	1.3.6.1.4.1.562.2.4.1.12.15.17.1.21	Counter32	read-only	This attribute indicates the total number of times that a far-end line failure (L-RFI failure) has been declared.
C32 lpSdhFarEndLineSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.18	Counter32	read-only	This attribute indicates the total number of Far-End Line Severely Errored Seconds (FELSESs) that have been counted. A FELSES is declared for second intervals containing more than x FELCVs or one or more L-RDI defects. The value of x is 154 for a 155 Mbits/ sec interface. Counting of FELSES is inhibited over second intervals where a FELUAS is counted.
C32 lpSdhFarEndLineUnavailSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.20	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS far-end line is unavailable. The STS far-end line becomes unavailable at the onset of 10 consecutive FELSESs. The 10 FELSESs are included in the unavailable time. Once unavailable, the STS far-end line becomes available at the onset of 10 contiguous seconds with no FELSES. The 10 seconds with no FELSES are excluded from the unavailable time. For second intervals where a Far-End Line Unavailable Second (FELUAS) is counted, counting of FELCV, FELES, FELSES and FELAISS is inhibited.
C32 lpSdhLineAisSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.12	Counter32	read-only	This attribute indicates the total number of Line AIS Seconds (LAISSs) that have been counted. A LAISS is declared for second intervals containing one or more L-AIS defects. Counting of LAISS is inhibited over second intervals where a LUAS is counted.
C32 lpSdhLineCodeViolations	1.3.6.1.4.1.562.2.4.1.12.15.17.1.9	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. Counting of LCVs is also inhibited over second intervals where a Line Unavailable Second (LUAS) is counted. The count wraps at its maximum value.
C32 lpSdhLineErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.10	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LESs) that have been counted. A LES is declared for second intervals containing one or more LCVs or one or more line AIS defects. Counting of LES is inhibited over second intervals where a LUAS is counted.
C32 lpSdhLineFailures	1.3.6.1.4.1.562.2.4.1.12.15.17.1.14	Counter32	read-only	This attribute indicates the total number of times that a line failure (L-AIS failure) has been declared.
C32 lpSdhLineSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.11	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSESs) that have been counted. A LSES is declared for second intervals containing more than x LCVs or one or more L- AIS defects. The value of x is 154 for a 155 Mbits/sec interface. Counting of LSES is inhibited over second intervals where a LUAS is counted.
C32 lpSdhLineUnavailSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS line is unavailable. The STS line becomes unavailable at the onset of 10 consecutive LSESs. The 10 LSESs are included in the unavailable time. Once unavailable, the STS line becomes available at the onset of 10 contiguous seconds with no LSES. The 10 seconds with no LSES are excluded from the unavailable time. For second intervals where a Line Unavailable Second (LUAS) is counted, counting of LCV, LES, LSES and LAISS is inhibited.
C32 lpSdhPathCellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
C32 lpSdhPathCellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
C32 lpSdhPathCellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 lpSdhPathFarEndPathAisLopSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.12	Counter32	read-only	This attribute indicates the total number of Far-End Path AIS and LOP Seconds (FEPALSs). A FEPALS is declared for second intervals containing one or more P-RDI defects. Counting of FEPALS is inhibited when FEPUAS is counted over the monitored second.
C32 lpSdhPathFarEndPathCodeViolations	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.9	Counter32	read-only	This attribute indicates the total number of Far-End Path Code Violations (FEPCVs) detected. Each FEPCV corresponds to a path FEBE. FEPCV counting is inhibited over second intervals where a Far-End Path Severely Errored Second (FEPSES) is counted. Counting of PCVs is also inhibited over second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted. The count wraps at its maximum value.
C32 lpSdhPathFarEndPathErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.10	Counter32	read-only	This attribute indicates the total number of Far-End Path Errored Seconds (FEPESs) that have been counted. A FEPES is declared for second intervals containing one or more FEPCVs or one or more path RDI (P-RDI) defects. Counting of FEPES is inhibited when FEPUAS is counted over the monitored second.
C32 lpSdhPathFarEndPathErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.8	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an far-end error free state.
C32 lpSdhPathFarEndPathFailures	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.14	Counter32	read-only	This attribute indicates the total number of times that a STS/STM far-end path failure (P-RFI failure) has been declared.
C32 lpSdhPathFarEndPathSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.11	Counter32	read-only	This attribute indicates the total number of Far-End Path Severely Errored Seconds (FEPSESs) that have been counted. A FEPSES is declared for second intervals containing more than x FEPCVs or one or more P-RDI defects. The value of x is 2400 for a 155 Mbits/ sec interface. Counting of FEPSESs is inhibited when FEPUAS is counted over the monitored second.
C32 lpSdhPathFarEndPathUnavailSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM far-end path is unavailable. The far-end path becomes unavailable at the onset of 10 consecutive FEPSESs. The 10 FEPSESs are included in the unavailable time. Once unavailable, the far-end path becomes available at the onset of 10 contiguous seconds with no FEPSES. The 10 seconds with no FEPSES are excluded from the unavailable time. For second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted, counting of FEPCV, FEPES, FEPSES and FEPALS is inhibited.
C32 lpSdhPathPathAisLopSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.5	Counter32	read-only	This attribute indicates the total number of path AIS and LOP Seconds (PALSs). A PALS is declared for second intervals containing one or more path AIS or LOP defects. Counting of PALS is inhibited when PUAS is counted over the monitored second.
C32 lpSdhPathPathCodeViolations	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.2	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. The count wraps at its maximum value.
C32 lpSdhPathPathErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.3	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more PCVs or one or more LOP or path AIS defects. Counting of PES is inhibited when PUAS is counted over the monitored second.
C32 lpSdhPathPathErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.1	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an near-end error free state.
C32 lpSdhPathPathFailures	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.7	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOP, P-AIS or Path Signal Label Mismatch failure) has been declared.
C32 lpSdhPathPathSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.4	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than x PCVs or one or more LOP or path AIS defects. The value of x is 2400 for a 155 Mbits/sec interface. Counting of PSES is inhibited when PUAS is counted over the monitored second.
C32 lpSdhPathPathUnavailSec	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.6	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM path is unavailable. The path becomes unavailable at the onset of 10 consecutive PSESs. The 10 PSESs are included in the unavailable time. Once unavailable, the path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where a Path Unavailable Second (PUAS) is counted, counting of PCV, PES, PSES and PALS is inhibited.
C32 lpSdhRunningTime	1.3.6.1.4.1.562.2.4.1.12.15.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the Sonet/ Sdh component has been activated and been in unlocked state. All the other error counts that follow can be updated when this count is active.
C32 lpSdhSectCodeViolations	1.3.6.1.4.1.562.2.4.1.12.15.17.1.3	Counter32	read-only	This attribute indicates the total number of Section Code Violations (SCVs) detected. A SCV corresponds to section BIP-8 error. SCV counting is inhibited for second intervals where a Section Severely Errored Second (SSES) is counted. The count wraps at its maximum value.
C32 lpSdhSectErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.4	Counter32	read-only	This attribute indicates the total number of Section Errored Seconds (SESs) that have been counted. A SES is declared for second intervals containing one or more SCVs or one or more Loss Of Signal (LOS) or Severely Errored Frame (SEF) defects. A SEF defect is the occurrence of 4 contiguous errored STS or STM frame alignment words.
C32 lpSdhSectFailures	1.3.6.1.4.1.562.2.4.1.12.15.17.1.8	Counter32	read-only	This attribute indicates the total number of times that a section failure (LOS or LOF failure) has been declared.
C32 lpSdhSectLosSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.6	Counter32	read-only	This attribute indicates the total number of Section LOS Seconds (SLOSSs) that have been counted. A SLOSS is declared for second intervals containing one or more LOS defects.
C32 lpSdhSectSevErroredFrmSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.7	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Frame Seconds (SSEFSs) that have been counted. A SSEFS is declared for second intervals containing one or more SEF defects.
C32 lpSdhSectSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.15.17.1.5	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Seconds (SSESs) that have been counted. A SSES is declared for second intervals containing more than x SCVs or one or more LOS or SEF defects. The value of x is 155 for a 155 Mbits/sec interface.
C32 lpSdhTestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 lpSonetErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an near-end error free state.
C32 lpSonetFarEndLineAisSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.19	Counter32	read-only	This attribute indicates the total number of Far-End Line AIS Seconds (FELAISSs) that have been counted. A FELAISS is declared for second intervals one or more L-RDI defects. Counting of FELAISS is inhibited over second intervals where a FELUAS is counted.
C32 lpSonetFarEndLineCodeViolations	1.3.6.1.4.1.562.2.4.1.12.14.17.1.16	Counter32	read-only	This attribute indicates the total number of line FEBE detected from the incoming line. The counting of line FEBE is inhibited for second intervals where a Far-End Line Severely Errored Second (FELSES) is counted. Counting of FELCVs is also inhibited over second intervals where a Far-End Line Unavailable Second (FELUAS) is counted. The count wraps at its maximum value.
C32 lpSonetFarEndLineErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.17	Counter32	read-only	This attribute indicates the total number of Far-End Line Errored Seconds (FELESs) that have been counted. A FELES is declared for second intervals containing one or more Far-End Line CVs (FELCVs) or one or more L-RDI defects. Counting of FELES is inhibited over second intervals where a FELUAS is counted.
C32 lpSonetFarEndLineErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.15	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an far-end error free state.
C32 lpSonetFarEndLineFailures	1.3.6.1.4.1.562.2.4.1.12.14.17.1.21	Counter32	read-only	This attribute indicates the total number of times that a far-end line failure (L-RFI failure) has been declared.
C32 lpSonetFarEndLineSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.18	Counter32	read-only	This attribute indicates the total number of Far-End Line Severely Errored Seconds (FELSESs) that have been counted. A FELSES is declared for second intervals containing more than x FELCVs or one or more L-RDI defects. The value of x is 154 for a 155 Mbits/ sec interface. Counting of FELSES is inhibited over second intervals where a FELUAS is counted.
C32 lpSonetFarEndLineUnavailSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.20	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS far-end line is unavailable. The STS far-end line becomes unavailable at the onset of 10 consecutive FELSESs. The 10 FELSESs are included in the unavailable time. Once unavailable, the STS far-end line becomes available at the onset of 10 contiguous seconds with no FELSES. The 10 seconds with no FELSES are excluded from the unavailable time. For second intervals where a Far-End Line Unavailable Second (FELUAS) is counted, counting of FELCV, FELES, FELSES and FELAISS is inhibited.
C32 lpSonetLineAisSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.12	Counter32	read-only	This attribute indicates the total number of Line AIS Seconds (LAISSs) that have been counted. A LAISS is declared for second intervals containing one or more L-AIS defects. Counting of LAISS is inhibited over second intervals where a LUAS is counted.
C32 lpSonetLineCodeViolations	1.3.6.1.4.1.562.2.4.1.12.14.17.1.9	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. Counting of LCVs is also inhibited over second intervals where a Line Unavailable Second (LUAS) is counted. The count wraps at its maximum value.
C32 lpSonetLineErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.10	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LESs) that have been counted. A LES is declared for second intervals containing one or more LCVs or one or more line AIS defects. Counting of LES is inhibited over second intervals where a LUAS is counted.
C32 lpSonetLineFailures	1.3.6.1.4.1.562.2.4.1.12.14.17.1.14	Counter32	read-only	This attribute indicates the total number of times that a line failure (L-AIS failure) has been declared.
C32 lpSonetLineSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.11	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSESs) that have been counted. A LSES is declared for second intervals containing more than x LCVs or one or more L- AIS defects. The value of x is 154 for a 155 Mbits/sec interface. Counting of LSES is inhibited over second intervals where a LUAS is counted.
C32 lpSonetLineUnavailSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS line is unavailable. The STS line becomes unavailable at the onset of 10 consecutive LSESs. The 10 LSESs are included in the unavailable time. Once unavailable, the STS line becomes available at the onset of 10 contiguous seconds with no LSES. The 10 seconds with no LSES are excluded from the unavailable time. For second intervals where a Line Unavailable Second (LUAS) is counted, counting of LCV, LES, LSES and LAISS is inhibited.
C32 lpSonetPathCellCorrectableHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
C32 lpSonetPathCellSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
C32 lpSonetPathCellUncorrectableHecErrors	1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 lpSonetPathFarEndPathAisLopSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.12	Counter32	read-only	This attribute indicates the total number of Far-End Path AIS and LOP Seconds (FEPALSs). A FEPALS is declared for second intervals containing one or more P-RDI defects. Counting of FEPALS is inhibited when FEPUAS is counted over the monitored second.
C32 lpSonetPathFarEndPathCodeViolations	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.9	Counter32	read-only	This attribute indicates the total number of Far-End Path Code Violations (FEPCVs) detected. Each FEPCV corresponds to a path FEBE. FEPCV counting is inhibited over second intervals where a Far-End Path Severely Errored Second (FEPSES) is counted. Counting of PCVs is also inhibited over second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted. The count wraps at its maximum value.
C32 lpSonetPathFarEndPathErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.10	Counter32	read-only	This attribute indicates the total number of Far-End Path Errored Seconds (FEPESs) that have been counted. A FEPES is declared for second intervals containing one or more FEPCVs or one or more path RDI (P-RDI) defects. Counting of FEPES is inhibited when FEPUAS is counted over the monitored second.
C32 lpSonetPathFarEndPathErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.8	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an far-end error free state.
C32 lpSonetPathFarEndPathFailures	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.14	Counter32	read-only	This attribute indicates the total number of times that a STS/STM far-end path failure (P-RFI failure) has been declared.
C32 lpSonetPathFarEndPathSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.11	Counter32	read-only	This attribute indicates the total number of Far-End Path Severely Errored Seconds (FEPSESs) that have been counted. A FEPSES is declared for second intervals containing more than x FEPCVs or one or more P-RDI defects. The value of x is 2400 for a 155 Mbits/ sec interface. Counting of FEPSESs is inhibited when FEPUAS is counted over the monitored second.
C32 lpSonetPathFarEndPathUnavailSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM far-end path is unavailable. The far-end path becomes unavailable at the onset of 10 consecutive FEPSESs. The 10 FEPSESs are included in the unavailable time. Once unavailable, the far-end path becomes available at the onset of 10 contiguous seconds with no FEPSES. The 10 seconds with no FEPSES are excluded from the unavailable time. For second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted, counting of FEPCV, FEPES, FEPSES and FEPALS is inhibited.
C32 lpSonetPathPathAisLopSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.5	Counter32	read-only	This attribute indicates the total number of path AIS and LOP Seconds (PALSs). A PALS is declared for second intervals containing one or more path AIS or LOP defects. Counting of PALS is inhibited when PUAS is counted over the monitored second.
C32 lpSonetPathPathCodeViolations	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.2	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. The count wraps at its maximum value.
C32 lpSonetPathPathErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.3	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more PCVs or one or more LOP or path AIS defects. Counting of PES is inhibited when PUAS is counted over the monitored second.
C32 lpSonetPathPathErrorFreeSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.1	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an near-end error free state.
C32 lpSonetPathPathFailures	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.7	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOP, P-AIS or Path Signal Label Mismatch failure) has been declared.
C32 lpSonetPathPathSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.4	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than x PCVs or one or more LOP or path AIS defects. The value of x is 2400 for a 155 Mbits/sec interface. Counting of PSES is inhibited when PUAS is counted over the monitored second.
C32 lpSonetPathPathUnavailSec	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.6	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM path is unavailable. The path becomes unavailable at the onset of 10 consecutive PSESs. The 10 PSESs are included in the unavailable time. Once unavailable, the path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where a Path Unavailable Second (PUAS) is counted, counting of PCV, PES, PSES and PALS is inhibited.
C32 lpSonetRunningTime	1.3.6.1.4.1.562.2.4.1.12.14.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the Sonet/ Sdh component has been activated and been in unlocked state. All the other error counts that follow can be updated when this count is active.
C32 lpSonetSectCodeViolations	1.3.6.1.4.1.562.2.4.1.12.14.17.1.3	Counter32	read-only	This attribute indicates the total number of Section Code Violations (SCVs) detected. A SCV corresponds to section BIP-8 error. SCV counting is inhibited for second intervals where a Section Severely Errored Second (SSES) is counted. The count wraps at its maximum value.
C32 lpSonetSectErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.4	Counter32	read-only	This attribute indicates the total number of Section Errored Seconds (SESs) that have been counted. A SES is declared for second intervals containing one or more SCVs or one or more Loss Of Signal (LOS) or Severely Errored Frame (SEF) defects. A SEF defect is the occurrence of 4 contiguous errored STS or STM frame alignment words.
C32 lpSonetSectFailures	1.3.6.1.4.1.562.2.4.1.12.14.17.1.8	Counter32	read-only	This attribute indicates the total number of times that a section failure (LOS or LOF failure) has been declared.
C32 lpSonetSectLosSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.6	Counter32	read-only	This attribute indicates the total number of Section LOS Seconds (SLOSSs) that have been counted. A SLOSS is declared for second intervals containing one or more LOS defects.
C32 lpSonetSectSevErroredFrmSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.7	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Frame Seconds (SSEFSs) that have been counted. A SSEFS is declared for second intervals containing one or more SEF defects.
C32 lpSonetSectSevErroredSec	1.3.6.1.4.1.562.2.4.1.12.14.17.1.5	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Seconds (SSESs) that have been counted. A SSES is declared for second intervals containing more than x SCVs or one or more LOS or SEF defects. The value of x is 155 for a 155 Mbits/sec interface.
C32 lpSonetTestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 lpV35DataXferStateChanges	1.3.6.1.4.1.562.2.4.1.12.9.16.1.5	Counter32	read-only	This attribute contains the number of times that the line has entered or exited the data transfer state.
C32 lpV35TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 lpX21DataXferStateChanges	1.3.6.1.4.1.562.2.4.1.12.10.16.1.5	Counter32	read-only	This attribute contains the number of times that the line has entered or exited the data transfer state.
C32 lpX21TestElapsedTime	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
DisplayString (53)
STR lpComponentName	1.3.6.1.4.1.562.2.4.1.12.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpDS1AudioComponentName	1.3.6.1.4.1.562.2.4.1.12.7.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpDS1ChanCellComponentName	1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpDS1ChanComponentName	1.3.6.1.4.1.562.2.4.1.12.7.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpDS1ChanTcComponentName	1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpDS1ChanTestComponentName	1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpDS1ComponentName	1.3.6.1.4.1.562.2.4.1.12.7.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpDS1DspComponentName	1.3.6.1.4.1.562.2.4.1.12.7.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpDS1TestComponentName	1.3.6.1.4.1.562.2.4.1.12.7.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpDS3CBitComponentName	1.3.6.1.4.1.562.2.4.1.12.5.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpDS3CellComponentName	1.3.6.1.4.1.562.2.4.1.12.5.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpDS3ComponentName	1.3.6.1.4.1.562.2.4.1.12.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpDS3DS1ChanCellComponentName	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpDS3DS1ChanComponentName	1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpDS3DS1ChanTcComponentName	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpDS3DS1ChanTestComponentName	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpDS3DS1ComponentName	1.3.6.1.4.1.562.2.4.1.12.5.6.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpDS3DS1TestComponentName	1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpDS3PlcpComponentName	1.3.6.1.4.1.562.2.4.1.12.5.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpDS3TestComponentName	1.3.6.1.4.1.562.2.4.1.12.5.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpE1AudioComponentName	1.3.6.1.4.1.562.2.4.1.12.8.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpE1ChanCellComponentName	1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpE1ChanComponentName	1.3.6.1.4.1.562.2.4.1.12.8.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpE1ChanTcComponentName	1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpE1ChanTestComponentName	1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpE1ComponentName	1.3.6.1.4.1.562.2.4.1.12.8.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpE1DspComponentName	1.3.6.1.4.1.562.2.4.1.12.8.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpE1TestComponentName	1.3.6.1.4.1.562.2.4.1.12.8.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpE3CellComponentName	1.3.6.1.4.1.562.2.4.1.12.6.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpE3ComponentName	1.3.6.1.4.1.562.2.4.1.12.6.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpE3G832ComponentName	1.3.6.1.4.1.562.2.4.1.12.6.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpE3PlcpComponentName	1.3.6.1.4.1.562.2.4.1.12.6.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpE3TestComponentName	1.3.6.1.4.1.562.2.4.1.12.6.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpEngComponentName	1.3.6.1.4.1.562.2.4.1.12.23.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpEngDsComponentName	1.3.6.1.4.1.562.2.4.1.12.23.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpEngDsOvComponentName	1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpHssiComponentName	1.3.6.1.4.1.562.2.4.1.12.17.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpHssiTestComponentName	1.3.6.1.4.1.562.2.4.1.12.17.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpJT2CellComponentName	1.3.6.1.4.1.562.2.4.1.12.16.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpJT2ComponentName	1.3.6.1.4.1.562.2.4.1.12.16.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpJT2TestComponentName	1.3.6.1.4.1.562.2.4.1.12.16.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpSdhComponentName	1.3.6.1.4.1.562.2.4.1.12.15.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpSdhPathCellComponentName	1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpSdhPathComponentName	1.3.6.1.4.1.562.2.4.1.12.15.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpSdhTestComponentName	1.3.6.1.4.1.562.2.4.1.12.15.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpSonetComponentName	1.3.6.1.4.1.562.2.4.1.12.14.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpSonetPathCellComponentName	1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpSonetPathComponentName	1.3.6.1.4.1.562.2.4.1.12.14.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpSonetTestComponentName	1.3.6.1.4.1.562.2.4.1.12.14.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpV35ComponentName	1.3.6.1.4.1.562.2.4.1.12.9.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpV35TestComponentName	1.3.6.1.4.1.562.2.4.1.12.9.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpX21ComponentName	1.3.6.1.4.1.562.2.4.1.12.10.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR lpX21TestComponentName	1.3.6.1.4.1.562.2.4.1.12.10.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
EnterpriseDateAndTime (1)
ENT lpScheduledSwitchover	1.3.6.1.4.1.562.2.4.1.12.103.1.5	EnterpriseDateAndTime	read-only	This attribute indicates the execution time of the scheduled switchover. When there is no switchover scheduled the time is equals to 0 (0000-00-00 00:00).
Gauge32 (41)
G32 lpCpuUtil	1.3.6.1.4.1.562.2.4.1.12.104.1.2	Gauge32	read-only	This attribute indicates an approximation of the current processor utilization level (expressed as a percentage).
G32 lpCpuUtilAvg	1.3.6.1.4.1.562.2.4.1.12.104.1.3	Gauge32	read-only	This attribute indicates an average processor utilization level over the specified time period, timeInterval. This average is calculated based on one minute CPU utilization averages.
G32 lpCpuUtilAvgMax	1.3.6.1.4.1.562.2.4.1.12.104.1.5	Gauge32	read-only	This attribute indicates the maximum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averages.
G32 lpCpuUtilAvgMin	1.3.6.1.4.1.562.2.4.1.12.104.1.4	Gauge32	read-only	This attribute indicates the minimum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averages.
G32 lpDS1ChanActualChannelSpeed	1.3.6.1.4.1.562.2.4.1.12.7.2.15.1.1	Gauge32	read-only	This attribute displays the measured link speed of the Channel component.
G32 lpDS1ChanCellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpDS1ChanCellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpDS3CellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpDS3CellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpDS3DS1ChanActualChannelSpeed	1.3.6.1.4.1.562.2.4.1.12.5.6.2.15.1.1	Gauge32	read-only	This attribute displays the measured link speed of the Channel component.
G32 lpDS3DS1ChanCellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpDS3DS1ChanCellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpE1ChanActualChannelSpeed	1.3.6.1.4.1.562.2.4.1.12.8.2.15.1.1	Gauge32	read-only	This attribute displays the measured link speed of the Channel component.
G32 lpE1ChanCellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpE1ChanCellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpE3CellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpE3CellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpHssiActualRxLineSpeed	1.3.6.1.4.1.562.2.4.1.12.17.16.1.4	Gauge32	read-only	This attribute is the measured speed of the receive clock. Note the reported receive speed is in an error of +/- 10000 bit/s
G32 lpHssiActualTxLineSpeed	1.3.6.1.4.1.562.2.4.1.12.17.16.1.3	Gauge32	read-only	This attribute is the measured speed of the transmit clock. Note the reported transmit speed is in an error of +/- 10000 bit/s
G32 lpJT2CellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpJT2CellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpLocalMsgBlockUsage	1.3.6.1.4.1.562.2.4.1.12.104.1.10	Gauge32	read-only	This attribute indicates the processor's current memory utilization (in kilobytes) of message blocks which are used for local messaging on the card.
G32 lpLocalMsgBlockUsageAvg	1.3.6.1.4.1.562.2.4.1.12.104.1.11	Gauge32	read-only	This attribute indicates the processor's average memory utilization (in kilobytes) of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this average memory utilization is reset to the current usage, localMsgBlockUsage.
G32 lpLocalMsgBlockUsageMax	1.3.6.1.4.1.562.2.4.1.12.104.1.13	Gauge32	read-only	This attribute indicates the processor's maximum memory utilization (in kilobytes) of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is updated at 15 second intervals. At the start of each timeInterval, this maximum memory utilization is reset to the current usage, localMsgBlockUsage.
G32 lpLocalMsgBlockUsageMin	1.3.6.1.4.1.562.2.4.1.12.104.1.12	Gauge32	read-only	This attribute indicates the processor's minimum memory utilization (in kilobytes) of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is updated at 15 second intervals. At the start of each timeInterval, this minimum memory utilization is reset to the current usage, localMsgBlockUsage.
G32 lpMemoryUsageAvgMaxValue	1.3.6.1.4.1.562.2.4.1.12.278.1.2	Gauge32	read-only	This variable represents an individual value for the lpMemoryUsageAvgMaxTable.
G32 lpMemoryUsageAvgMinValue	1.3.6.1.4.1.562.2.4.1.12.277.1.2	Gauge32	read-only	This variable represents an individual value for the lpMemoryUsageAvgMinTable.
G32 lpMemoryUsageAvgValue	1.3.6.1.4.1.562.2.4.1.12.276.1.2	Gauge32	read-only	This variable represents an individual value for the lpMemoryUsageAvgTable.
G32 lpMemoryUsageValue	1.3.6.1.4.1.562.2.4.1.12.245.1.2	Gauge32	read-only	This variable represents an individual value for the lpMemoryUsageTable.
G32 lpMsgBlockUsage	1.3.6.1.4.1.562.2.4.1.12.104.1.6	Gauge32	read-only	This attribute indicates the processor's current shared message block memory utilization (in kilobytes). If there is no shared memory on the card, this attribute indicates 0.
G32 lpMsgBlockUsageAvg	1.3.6.1.4.1.562.2.4.1.12.104.1.7	Gauge32	read-only	This attribute indicates the processor's average memory utilization (in kilobytes) of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this average memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
G32 lpMsgBlockUsageAvgMax	1.3.6.1.4.1.562.2.4.1.12.104.1.9	Gauge32	read-only	This attribute indicates the processor's maximum memory utilization (in kilobytes) of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this maximum memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
G32 lpMsgBlockUsageAvgMin	1.3.6.1.4.1.562.2.4.1.12.104.1.8	Gauge32	read-only	This attribute indicates the processor's minimum memory utilization (in kilobytes) of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this minimum memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
G32 lpSdhPathCellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpSdhPathCellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpSonetPathCellReceiveCellUtilization	1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpSonetPathCellTransmitCellUtilization	1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 lpV35ActualRxLineSpeed	1.3.6.1.4.1.562.2.4.1.12.9.16.1.4	Gauge32	read-only	This attribute is the measured speed of the receive clock.
G32 lpV35ActualTxLineSpeed	1.3.6.1.4.1.562.2.4.1.12.9.16.1.3	Gauge32	read-only	This attribute is the measured speed of the transmit clock.
G32 lpX21ActualRxLineSpeed	1.3.6.1.4.1.562.2.4.1.12.10.16.1.4	Gauge32	read-only	This attribute is the measured speed of the receive clock.
G32 lpX21ActualTxLineSpeed	1.3.6.1.4.1.562.2.4.1.12.10.16.1.3	Gauge32	read-only	This attribute is the measured speed of the transmit clock.
Hex (17)
HEX lpDS1ChanTcReplacementData	1.3.6.1.4.1.562.2.4.1.12.7.2.4.10.1.1	Hex	read-write	This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
HEX lpDS1ChanTestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX lpDS1TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX lpDS3DS1ChanTcReplacementData	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.10.1.1	Hex	read-write	This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
HEX lpDS3DS1ChanTestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX lpDS3DS1TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX lpDS3TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX lpE1ChanTcReplacementData	1.3.6.1.4.1.562.2.4.1.12.8.2.4.10.1.1	Hex	read-write	This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
HEX lpE1ChanTestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX lpE1TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX lpE3TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX lpHssiTestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX lpJT2TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX lpSdhTestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX lpSonetTestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX lpV35TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX lpX21TestCustomizedPattern	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
INTEGER (357)
INT lpAdminState	1.3.6.1.4.1.562.2.4.1.12.102.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS1AdminState	1.3.6.1.4.1.562.2.4.1.12.7.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS1ChanAdminState	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS1ChanCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.7.2.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
INT lpDS1ChanCellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.7.2.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
INT lpDS1ChanCellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.7.2.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT lpDS1ChanIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT lpDS1ChanOperationalState	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS1ChanSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpDS1ChanStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpDS1ChanTcEgressConditioning	1.3.6.1.4.1.562.2.4.1.12.7.2.4.11.1.2	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
INT lpDS1ChanTcIngressConditioning	1.3.6.1.4.1.562.2.4.1.12.7.2.4.11.1.1	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
INT lpDS1ChanTcSigOneIndex	1.3.6.1.4.1.562.2.4.1.12.7.2.4.398.1.1	INTEGER	not-accessible	This variable represents the lpDS1ChanTcSigOneTable specific index for the lpDS1ChanTcSigOneTable.
INT lpDS1ChanTcSigTwoIndex	1.3.6.1.4.1.562.2.4.1.12.7.2.4.399.1.1	INTEGER	not-accessible	This variable represents the lpDS1ChanTcSigTwoTable specific index for the lpDS1ChanTcSigTwoTable.
INT lpDS1ChanTestAdminState	1.3.6.1.4.1.562.2.4.1.12.7.2.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpDS1ChanTestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
INT lpDS1ChanTestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT lpDS1ChanTestOperationalState	1.3.6.1.4.1.562.2.4.1.12.7.2.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpDS1ChanTestType	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpDS1ChanTestUsageState	1.3.6.1.4.1.562.2.4.1.12.7.2.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpDS1ChanTimeslotDataRate	1.3.6.1.4.1.562.2.4.1.12.7.2.10.1.2	INTEGER	read-write	This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependent on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56kbit/s is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
INT lpDS1ChanUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpDS1ChanUsageState	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS1ClockingSource	1.3.6.1.4.1.562.2.4.1.12.7.10.1.3	INTEGER	read-write	This attribute defines the source of the transmit clock for the DS1 line. When local is selected, the crystal on the port generates the clocking for the line. When line is selected, the port synchronizes to the clock from the facility. When module is selected, the ports clock synchronizes to the clock provided by the oscillator on the active CP. When otherPort is selected, the port synchronizes to the port with a clocking source of line. When srtsMode is selected, the port synchronization is taken from the SRTS (Synchronous Residual Time-Stamp) bits extracted from the AAL1 cells. This option is only available for unstructured AAL1 data services when the other ports on the card have their clocking source set to module. If the NetworkSynchronization (NS) component is present the default value of this attribute will be module otherwise it will default to local. Note that 3pDS1Atm cards have one common clock source for all ports and do not support the line clock source; all three ports must have the same value, either local or module.
INT lpDS1IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.7.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT lpDS1LineType	1.3.6.1.4.1.562.2.4.1.12.7.10.1.1	INTEGER	read-write	This attribute defines the framing of the DS1 line. d4 defines a framing pattern of 12 frames per multiframe. esf defines a framing pattern of 24 frames per multiframe. d4Cas defines a framing pattern of 12 frames per multiframe with channel associated signalling. esfCas defines a framing pattern of 24 frames per multiframe with channel associated signalling. unframed defines an unknown framing pattern for clear channels. For cell-based cards only the default option esf is permitted.
INT lpDS1LofAlarm	1.3.6.1.4.1.562.2.4.1.12.7.16.1.3	INTEGER	read-only	This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (for DS1: 2 out of 5 framing bits in error; for E1: 3 consecutive frame alignment patterns in error) have been detected for 3 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
INT lpDS1LosAlarm	1.3.6.1.4.1.562.2.4.1.12.7.16.1.1	INTEGER	read-only	This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulated for a period of 2 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). A LOS defect is detected upon observing all zeros for 150 ms (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: upon observing 175 +/- 75 pulse positions with no pulses of either positive or negative polarity). If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOS alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOS alarm state. The LOS alarm state is cleared when LOS defects are absent for 10 seconds +/- 0.5 seconds.
INT lpDS1OperationalState	1.3.6.1.4.1.562.2.4.1.12.7.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS1RaiAlarmType	1.3.6.1.4.1.562.2.4.1.12.7.10.1.4	INTEGER	read-write	This attribute defines the method of sending a RAI (Remote Alarm Indication) alarm on a DS1 line. When SBit is selected, RAI alarm is sent by setting the S bit in frame 12. When Bit2 is selected, RAI alarm is sent by setting bit 2 in all timeslots to 0. When fdl is selected, RAI alarm is sent by a repeating pattern of 00 hex and FF hex on the FDL link. Note that for lineType of d4, only the SBit and the Bit2 methods are applicable. Whereas for lineType of esf, only the Bit2 and the fdl methods are applicable. SBit method is recommended if lineType is set to d4 and zeroCoding is set to ami. This will help to avoid potential mimic RAI alarm when 1's density is too low in the data transmitted. For cell-based cards only the default value fdl is permitted.
INT lpDS1RxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.7.16.1.2	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both an Out Of Frame condition exists and a 1's density of at least 99.9% is present for a time T, where 3 ms T 75 ms; for 8pE1Atm cards: when both an Out Of Frame condition exists and fewer than three 0's have been received in 512 bit periods). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
INT lpDS1RxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.7.16.1.4	INTEGER	read-only	This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards: alarm is declared immediately upon observing the defect is present, with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm state is entered when the RAI defect indicator has been observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and 8pDS1Atm cards: alarm is cleared immediately upon observing the defect is absent, with no integration time). The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
INT lpDS1SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.7.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpDS1StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.7.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpDS1TestAdminState	1.3.6.1.4.1.562.2.4.1.12.7.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpDS1TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
INT lpDS1TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT lpDS1TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.7.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpDS1TestType	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpDS1TestUsageState	1.3.6.1.4.1.562.2.4.1.12.7.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpDS1TxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.7.16.1.5	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the port is in a locked state.
INT lpDS1TxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.7.16.1.6	INTEGER	read-only	This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port detects a LOF alarm condition (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: RAI is transmitted when the port detects a LOS, LOF, or AIS condition).
INT lpDS1UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.7.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpDS1UsageState	1.3.6.1.4.1.562.2.4.1.12.7.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS1ZeroCoding	1.3.6.1.4.1.562.2.4.1.12.7.10.1.2	INTEGER	read-write	This attribute defines the zero encoding on the DS1 line. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the available bandwidth of the channel by 1/8. b8zs substitutes a pattern of bipolar violations if more than 7 zeros in a row are to be transported. ami specifies Alternate Mark Inversion, in which successive marks (ones) alternate between positive and negative polarity voltage signals, and spaces (zeros) are sent as a zero amplitude signal. When zeroCoding is set to ami and lineType is set to d4, it is recommended that raiAlarmType be set to SBit in order to avoid possible mimic RAI alarm. For cell-based cards only the default value b8zs is permitted.
INT lpDS3AdminState	1.3.6.1.4.1.562.2.4.1.12.5.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS3CBitFarEndAlarm	1.3.6.1.4.1.562.2.4.1.12.5.3.10.1.1	INTEGER	read-only	This attribute indicates the Far-End alarm signal that is currently received at the DS3 interface. This signal is carried over the Far- End Alarm and Control (FEAC) bits of DS3 frames. Five far-end alarm signals can be received: far-end equipment failure that is received when the far-end terminal has detected a local equipment failure; far-end Loss Of Signal (LOS) that is received when the far- end DS3 terminal has declared a LOS failure condition; far-end Loss of Frame (LOF) when the far-end DS3 terminal has declared a Loss Of Frame (LOF) failure condition; far-end Alarm Indication Signal (AIS) when the far-end has declared an AIS failure condition; far-end Idle when the far-end has declared an Idle signal condition.
INT lpDS3CbitParity	1.3.6.1.4.1.562.2.4.1.12.5.10.1.1	INTEGER	read-write	This attribute indicates if C-Bit parity has been turned ON or OFF. The CBIT component will appear under the DS3 component when the cbitParity attribute is set to on.
INT lpDS3CellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.5.5.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
INT lpDS3CellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.5.5.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
INT lpDS3CellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.5.5.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT lpDS3ClockingSource	1.3.6.1.4.1.562.2.4.1.12.5.10.1.3	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the DS3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means use of a signal phase-locked to the incoming DS3 line rate; module means the use of a signal phase-locked to the CP reference clock. Note that the multiport cell-based cards have one common clock source for all ports. For this reason, the following rules apply for the value of clockingSource across the board's three ports: All three clockingSource values must be 'local' OR All three clockingSource values must be 'module' OR One clockingSource value must be 'line' and the other two must be 'otherPort'. The there is no NS component provisioned, the default value for this attribute will be local. If the NS component has been provisioned, the default value is module, except for the 1pDS3C cards. For the 1pDS3C cards, the default and only valid value for this attribute is local. The clockingSource of the DS1 sub-component becomes the effective clocking source for this attribute. All the DS1 sub-components have the same clocking source.
INT lpDS3DS1AdminState	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS3DS1ChanAdminState	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS3DS1ChanCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
INT lpDS3DS1ChanCellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
INT lpDS3DS1ChanCellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT lpDS3DS1ChanIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT lpDS3DS1ChanOperationalState	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS3DS1ChanSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpDS3DS1ChanStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpDS3DS1ChanTcEgressConditioning	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.11.1.2	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
INT lpDS3DS1ChanTcIngressConditioning	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.11.1.1	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
INT lpDS3DS1ChanTcSigOneIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.398.1.1	INTEGER	not-accessible	This variable represents the lpDS3DS1ChanTcSigOneTable specific index for the lpDS3DS1ChanTcSigOneTable.
INT lpDS3DS1ChanTcSigTwoIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.399.1.1	INTEGER	not-accessible	This variable represents the lpDS3DS1ChanTcSigTwoTable specific index for the lpDS3DS1ChanTcSigTwoTable.
INT lpDS3DS1ChanTestAdminState	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpDS3DS1ChanTestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
INT lpDS3DS1ChanTestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT lpDS3DS1ChanTestOperationalState	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpDS3DS1ChanTestType	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpDS3DS1ChanTestUsageState	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpDS3DS1ChanTimeslotDataRate	1.3.6.1.4.1.562.2.4.1.12.5.6.2.10.1.2	INTEGER	read-write	This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependent on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56kbit/s is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
INT lpDS3DS1ChanUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpDS3DS1ChanUsageState	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS3DS1ClockingSource	1.3.6.1.4.1.562.2.4.1.12.5.6.10.1.3	INTEGER	read-write	This attribute defines the source of the transmit clock for the DS1 tributary. When the clocking source is selected from local, the crystal on the port generates the clocking for the DS1 tributary. When the clocking source is selected from line, the port synchronizes to the clock from the DS1 tributary. When the clocking source is selected from module, the ports clock synchronizes to the clock provided by the oscillator on the active CP. On a 1pDS3C card, if the NetworkSynchronization (NS) component is present the default value of this attribute will be module otherwise it will be line. On a 2pDS3cAal card, the only valid values are local and module. If the NS component is present the default value of this attribute will be module otherwise it will be local.
INT lpDS3DS1IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT lpDS3DS1LineType	1.3.6.1.4.1.562.2.4.1.12.5.6.10.1.1	INTEGER	read-write	This attribute defines the framing of the DS1 tributary. d4 defines a framing pattern of 12 frames per multiframe. esf defines a framing pattern of 24 frames per multiframe. d4Cas defines a framing pattern of 12 frames per multiframe with channel associated signalling. esfCas defines a framing pattern of 24 frames per multiframe with channel associated signalling.
INT lpDS3DS1LofAlarm	1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.2	INTEGER	read-only	This attribute indicates whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (2 out of 5 framing bits in error ) have been detected for 3 seconds +/- 0.5 seconds. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. This tributary goes into an operationalState of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
INT lpDS3DS1OperationalState	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS3DS1RxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.1	INTEGER	read-only	This attribute indicates whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/- 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period. If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. This tributary goes into an operationalState of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
INT lpDS3DS1RxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.3	INTEGER	read-only	This attribute indicates whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/ 10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds. The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
INT lpDS3DS1SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpDS3DS1StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpDS3DS1TestAdminState	1.3.6.1.4.1.562.2.4.1.12.5.6.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpDS3DS1TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
INT lpDS3DS1TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT lpDS3DS1TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.5.6.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpDS3DS1TestType	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpDS3DS1TestUsageState	1.3.6.1.4.1.562.2.4.1.12.5.6.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpDS3DS1TxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.4	INTEGER	read-only	This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the tributary is in a locked state.
INT lpDS3DS1TxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.5	INTEGER	read-only	This attribute indicates whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the tributary detects a LOF alarm condition.
INT lpDS3DS1UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpDS3DS1UsageState	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS3DS1ZeroCoding	1.3.6.1.4.1.562.2.4.1.12.5.6.10.1.2	INTEGER	read-write	This attribute defines the zero encoding on the DS1 tributary. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the available bandwidth of the channel by 1/8. none does no zero encoding.
INT lpDS3IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.5.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT lpDS3LofAlarm	1.3.6.1.4.1.562.2.4.1.12.5.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely Errored Frame (SEF) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. A SEF defect is detected when 3 (or more) out of 16 (or fewer) F-bits are in error, or one (or more) M-bits in two (or more) out of four (or fewer) consecutive M-frames are in error. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. As long as SEF defects are detected, the node also transmits the far-end SEF/AIS defect indicator over the outgoing line. When not running in C-Bit Parity mode, the txRai attribute is also set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT lpDS3LosAlarm	1.3.6.1.4.1.562.2.4.1.12.5.16.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is detected at the DS3 line interface upon observing 175 +/- 75 continuous pulse positions with no pulses of either positive or negative polarity. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT lpDS3Mapping	1.3.6.1.4.1.562.2.4.1.12.5.10.1.5	INTEGER	read-write	This attribute indicates if ATM cells will be mapped directly into the DS3 payload, or whether PLCP mapping will be used. The PLCP component will appear under the DS3 component when this attribute is set to plcp. This attribute will be ignored when set on frame-based cards.
INT lpDS3OperationalState	1.3.6.1.4.1.562.2.4.1.12.5.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpDS3PlcpLofAlarm	1.3.6.1.4.1.562.2.4.1.12.5.4.10.1.1	INTEGER	read-only	This attribute displays whether a PLCP Loss Of Frame (LOF) failure alarm state has been entered. An LOF failure is declared when a PLCP LOF defect persists for 2.5 s +/- 0.5 s. An LOF defect occurs when an OOF (Out of Frame) state persists for more than 1 ms. If the OOF events are intermittent, the LOF defect counter is decremented at a rate of 1/12 (for DS3 PLCP) or 1/9 (for G.751 E3 PLCP) of the incrementing rate, with all measurements based on a 200 ms polling cycle. An OOF event (also known as a PLCP SEF event) is declared when an error is detected in both the A1 and A2 octets, or when two consecutive POHIDs are found in error. OOF is removed when two valid sets of framing octets and two valid and sequential POHID octets have been found. The LOF defect is removed when the defect counter reaches zero, i.e. when OOF events are absent for more than 12 ms (DS3 PLCP) or 9 ms (G.751 E3 PLCP). LOF failure alarm is cleared when LOF defect is absent for 10.0 s +/- 0.5 s The DS3 or E3 component goes into an operational state of disabled until the LOF failure alarm is cleared. The terminal declaring the LOF failure alarm will transmit a PLCP RAI signal to the far-end for the duration of the alarm. The lofAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
INT lpDS3PlcpRxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.5.4.10.1.2	INTEGER	read-only	This attribute displays whether a PLCP Remote Alarm Indication (RAI) failure alarm state has been entered. An RAI failure alarm occurs when ten consecutive PLCP RAI bits (bit 5 in the G1 byte) are high on the incoming line. An RAI failure alarm is cleared when ten consecutive RAI bits are set to 0. Note: Some standards call this alarm RFI. The rxRaiAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
INT lpDS3RxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.5.16.1.3	INTEGER	read-only	This attribute displays whether an Alarm Indication Signal (AIS) alarm state has been entered. An AIS alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is the occurrence of AIS (valid DS3 frame with payload containing the 1010...sequence and with C-Bits set to zero) in contiguous M-frames for a time greater than 100 milliseconds. If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the AIS alarm condition is cleared (after AIS has been no longer detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS is detected, the node also transmits the far-end SEF/AIS defect indicator over the outgoing line. When not running in C-Bit Parity mode, the txRai attribute is also set to on when transmitting the far- end SEF/AIS defect indicator on the outgoing line. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT lpDS3RxIdle	1.3.6.1.4.1.562.2.4.1.12.5.16.1.5	INTEGER	read-only	This attribute displays whether an Idle failure condition has been reported on the DS3 port. An Idle condition is reported when DS3 Idle defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The DS3 Idle defect is the occurrence of a valid DS3 frame with the information bits set to a 11001100.. sequence. If the DS3 Idle defects are intermittently occurring, the DS3 Idle defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the Idle failure condition is cleared. The failure condition is cleared when the DS3 idle pattern has not been detected for at least 10 seconds +/- 0.5 seconds. The rxIdle attribute is always set to off when the component has been locked and left offline. The idle pattern indicates that the far-end is physically connected but not put in service. For instance, DS3 idle is transmitted on the outgoing line when the DS3 component is locked and not used for operational testing.
INT lpDS3RxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.5.16.1.4	INTEGER	read-only	This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. When not running the C-Bit Parity mode, the RAI alarm state is entered when the far-end SEF/AIS defect indicator has been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the incoming DS3 line. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the RAI alarm condition is cleared. The condition is cleared when the far-end SEF/AIS defect indicator has not been detected for 10 seconds +/- 0.5 seconds. When running the C-Bit Parity mode, the RAI alarm state is entered upon detection of a far-end alarm over the Far-End Alarm and Control (FEAC) channel. The RAI alarm state is exited as soon as no more far-end alarm is detected on the FEAC channel. The far- end alarms that can be detected on the FEAC channel and that cause the RAI alarm state to be entered are: equipment failure alarm (service affecting), LOS alarm, LOF alarm, idle and AIS alarm. The rxRaiAlarm attribute is always set to off when the component has been locked and left offline.
INT lpDS3SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.5.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpDS3StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.5.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpDS3TestAdminState	1.3.6.1.4.1.562.2.4.1.12.5.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpDS3TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
INT lpDS3TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT lpDS3TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.5.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpDS3TestType	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpDS3TestUsageState	1.3.6.1.4.1.562.2.4.1.12.5.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpDS3TxAis	1.3.6.1.4.1.562.2.4.1.12.5.16.1.6	INTEGER	read-only	This attribute displays whether an Alarm Indication Signal (AIS) alarm is being transmitted on the DS3 line. Currently, AIS is never transmitted by a Passport DS3 node.
INT lpDS3TxIdle	1.3.6.1.4.1.562.2.4.1.12.5.16.1.8	INTEGER	read-only	This attribute displays whether the DS3 Idle signal is transmitted over the outgoing line. DS3 Idle is sent when the DS3 component has been locked and not used in operational testing.
INT lpDS3TxRai	1.3.6.1.4.1.562.2.4.1.12.5.16.1.7	INTEGER	read-only	When not running C-Bit Parity mode, this attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the DS3 component has been unlocked or used in operational testing. When running in C-Bit Parity mode, this attribute displays whether a far-end alarm is sent over the Far-End Alarm and Control (FEAC) channel when the DS3 component has been unlocked or used in operational testing. When the DS3 component is locked and not used in operational testing, this attribute is always set to off.
INT lpDS3UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.5.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpDS3UsageState	1.3.6.1.4.1.562.2.4.1.12.5.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpE1AdminState	1.3.6.1.4.1.562.2.4.1.12.8.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpE1ChanAdminState	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpE1ChanCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.8.2.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
INT lpE1ChanCellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.8.2.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
INT lpE1ChanCellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.8.2.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT lpE1ChanIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT lpE1ChanOperationalState	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpE1ChanSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpE1ChanStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpE1ChanTcEgressConditioning	1.3.6.1.4.1.562.2.4.1.12.8.2.4.11.1.2	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
INT lpE1ChanTcIngressConditioning	1.3.6.1.4.1.562.2.4.1.12.8.2.4.11.1.1	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
INT lpE1ChanTcSigOneIndex	1.3.6.1.4.1.562.2.4.1.12.8.2.4.398.1.1	INTEGER	not-accessible	This variable represents the lpE1ChanTcSigOneTable specific index for the lpE1ChanTcSigOneTable.
INT lpE1ChanTcSigTwoIndex	1.3.6.1.4.1.562.2.4.1.12.8.2.4.399.1.1	INTEGER	not-accessible	This variable represents the lpE1ChanTcSigTwoTable specific index for the lpE1ChanTcSigTwoTable.
INT lpE1ChanTestAdminState	1.3.6.1.4.1.562.2.4.1.12.8.2.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpE1ChanTestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
INT lpE1ChanTestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT lpE1ChanTestOperationalState	1.3.6.1.4.1.562.2.4.1.12.8.2.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpE1ChanTestType	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpE1ChanTestUsageState	1.3.6.1.4.1.562.2.4.1.12.8.2.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpE1ChanTimeslotDataRate	1.3.6.1.4.1.562.2.4.1.12.8.2.10.1.2	INTEGER	read-write	This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependent on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56kbit/s is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
INT lpE1ChanUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpE1ChanUsageState	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpE1ClockingSource	1.3.6.1.4.1.562.2.4.1.12.8.10.1.2	INTEGER	read-write	This attribute defines the source of the transmit clock for the E1 line. When local is selected, the crystal on the port generates the clocking for the line. When line is selected, the port synchronizes to the clock from the facility. When module is selected, the ports clock synchronizes to the clock provided by the oscillator on the active CP. When otherPort is selected, the port synchronizes to the port with a clocking source of line. When srtsMode is selected, the port sychronization is taken from the SRTS (Synchronous Residual Time Stamp) bits within the ATM cell. If the NetworkSynchronization (NS) component is present the default value of this attribute will be module otherwise it will default to line except for the 3pE1Atm card which defaults to local. The 3pE1Atm card has one common clock source for all ports and does not support the line clock source; all three ports must have the same value, either local or module. The clockingSource values otherPort and srtsMode are only valid for the AAL1 cards. For the AAL1 cards either: all four ports' clockingSource values must be local OR all four ports' clockingSource values must be module OR one port's clockingSource value must be line and the other three must be otherPort. A port can only have srtsMode selected if the other ports are module or srtsMode.
INT lpE1Crc4Mode	1.3.6.1.4.1.562.2.4.1.12.8.10.1.3	INTEGER	read-write	This attribute defines whether the CRC-4 checking and generation on the E1 line is enabled or disabled. The default CRC-4 mode is off except for the cell-based cards which default to on as per the ATM Forum.
INT lpE1IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.8.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT lpE1LineType	1.3.6.1.4.1.562.2.4.1.12.8.10.1.1	INTEGER	read-write	This attribute specifies the framing of the E1 line. When cas (channel associated signalling) is selected, timeslot 16 is reserved for multiframe signalling and only 30 timeslots are available for data. The signalling bits are not interpreted. When ccs (common channel signalling) is selected, timeslot 16 is not reserved for multiframe signalling and 31 timeslots are available for data. The signalling bits are not interpreted. When unframed is selected, a clear channel is defined whereby data from all timeslots including the framing data (in timeslot 0) and timeslot 16 are passed transparently. This value is valid only for AAL1 cards. For cell-based cards the ATM Forum specifies that timeslot 16 be reserved, leaving 30 timeslots available for data. The default value is cas except for the 8pE1Atm card, for which the default and only valid value is ccs.
INT lpE1LofAlarm	1.3.6.1.4.1.562.2.4.1.12.8.16.1.3	INTEGER	read-only	This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (for DS1: 2 out of 5 framing bits in error; for E1: 3 consecutive frame alignment patterns in error) have been detected for 3 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
INT lpE1LosAlarm	1.3.6.1.4.1.562.2.4.1.12.8.16.1.1	INTEGER	read-only	This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulated for a period of 2 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). A LOS defect is detected upon observing all zeros for 150 ms (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: upon observing 175 +/- 75 pulse positions with no pulses of either positive or negative polarity). If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOS alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOS alarm state. The LOS alarm state is cleared when LOS defects are absent for 10 seconds +/- 0.5 seconds.
INT lpE1MultifrmLofAlarm	1.3.6.1.4.1.562.2.4.1.12.8.17.1.1	INTEGER	read-only	This attribute indicates whether a multiframe LOF (loss of frame) alarm state is entered. A multiframe LOF alarm state is entered when a multiframe LOF defect (2 consecutive errors in the multiframe alignment signal) has been detected and accumulated for 2.5 seconds +/- 0.5 seconds. If the multiframe LOF defects are intermittently occurring, the multiframe LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The alarm is cleared when the defect is not detected for 10 seconds +/- 0.5 seconds. When the multiframe LOF alarm is on, a multiframe RAI alarm indicator is transmitted on the line. The 8pE1Atm card does not support the multiframe LOF alarm.
INT lpE1OperationalState	1.3.6.1.4.1.562.2.4.1.12.8.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpE1RxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.8.16.1.2	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both an Out Of Frame condition exists and a 1's density of at least 99.9% is present for a time T, where 3 ms T 75 ms; for 8pE1Atm cards: when both an Out Of Frame condition exists and fewer than three 0's have been received in 512 bit periods). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
INT lpE1RxMultifrmRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.8.17.1.2	INTEGER	read-only	This attribute displays whether a multiframe RAI (remote alarm indicator) alarm state has been entered. A multiframe RAI alarm state is entered when a multiframe RAI alarm indicator (bit 6 of timeslot 16 in frame 0 is set to a one) is observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the multiframe RAI indicator is intermittently received, the multiframe RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The multiframe RAI alarm condition is cleared when the multiframe RAI alarm indication is not received for 10 seconds +/- 0.5 seconds. The multiframe RAI alarm is usually an indication that the far end facility is unable to gain multiframe synchronization. The 8pE1Atm card does not support the multiframe RAI alarm.
INT lpE1RxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.8.16.1.4	INTEGER	read-only	This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards: alarm is declared immediately upon observing the defect is present, with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm state is entered when the RAI defect indicator has been observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and 8pDS1Atm cards: alarm is cleared immediately upon observing the defect is absent, with no integration time). The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
INT lpE1SendRaiOnAis	1.3.6.1.4.1.562.2.4.1.12.8.10.1.4	INTEGER	read-write	This attribute defines whether the Remote Alarm Indicator (RAI) will be sent when receiving an AIS alarm. The value is yes by default; it can be changed to no only for ports on J2MV cards.
INT lpE1SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.8.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpE1StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.8.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpE1TestAdminState	1.3.6.1.4.1.562.2.4.1.12.8.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpE1TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
INT lpE1TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT lpE1TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.8.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpE1TestType	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpE1TestUsageState	1.3.6.1.4.1.562.2.4.1.12.8.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpE1TxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.8.16.1.5	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the port is in a locked state.
INT lpE1TxMultifrmRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.8.17.1.3	INTEGER	read-only	This attribute displays whether a multiframe RAI (remote alarm indicator) alarm is being sent on the E1 line. This is transmitted when the E1 port detects a multiframe LOF condition. The 8pE1Atm card does not generate the multiframe RAI alarm.
INT lpE1TxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.8.16.1.6	INTEGER	read-only	This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port detects a LOF alarm condition (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: RAI is transmitted when the port detects a LOS, LOF, or AIS condition).
INT lpE1UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.8.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpE1UsageState	1.3.6.1.4.1.562.2.4.1.12.8.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpE3AdminState	1.3.6.1.4.1.562.2.4.1.12.6.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpE3CellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.6.5.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
INT lpE3CellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.6.5.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
INT lpE3CellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.6.5.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT lpE3ClockingSource	1.3.6.1.4.1.562.2.4.1.12.6.10.1.2	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the E3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means use of a signal phase-locked to the incoming E3 line rate; module means the use of a signal phase-locked to the CP reference clock. Note that the multiport cell-based cards have one common clock source for each of the three ports. For this reason, the following rules apply for the value of clockingSource across the board's three ports: All three clockingSource values must be 'local' OR All three clockingSource values must be 'module' OR One clockingSource value must be 'line' and the other two must be 'otherPort'. The default value for this attribute will be module if a CP clock is available, and local otherwise.
INT lpE3Framing	1.3.6.1.4.1.562.2.4.1.12.6.10.1.5	INTEGER	read-write	This attribute indicates if the framing mode will be in accordance with the CCITT G.751 or G.832 specification. The G832 component will appear under the E3 component when this attribute is set to g832. This attribute may only be set on cell-based card types. Note also that this attribute may only be set to g751 if the mapping attribute is set to plcp. The default value of this attribute will be g751 for frame-based cards, and g832 for cell-based cards. Note: when E3 framing is changed from g832 to g751, the G832 component must be deleted.
INT lpE3G832TimingMarker	1.3.6.1.4.1.562.2.4.1.12.6.3.11.1.3	INTEGER	read-only	Indicates whether or not the timing source at the far-end node is traceable to a Primary Reference Clock. The timingMarker indication is controlled by the timing marker bit in the G832 MA byte. If the received timing marker bit is 1 for five consecutive frames, and five consecutive 0s are not received for two seconds, the timingMarker indication will be set to not traceable. If the received timing marker bit is 0 for five consecutive frames and five consecutive 1s are not received for two seconds, the timingMarker indication will be set to traceable.
INT lpE3G832TrailTraceMismatch	1.3.6.1.4.1.562.2.4.1.12.6.3.11.1.2	INTEGER	read-only	This attribute displays whether the Trail Trace Mismatch (TTM) alarm state has been entered. The TTM alarm state is entered when TTM defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The TTM defect is reported when the trail access point identifier contained in the Trail Trace (TR) field in the received frame fails to agree with the expected identifier. If the TTM defects are intermittently occurring, the TTM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The TTM alarm is cleared when the trail access point identifier in the received frame agrees with the expected identifier for a period of 10 seconds +/- 0.5 seconds. The trailTraceMismatch attribute is always set to off when the E3 component has been locked and left offline. Both the expected trail access identifier and the transmitted trail access identifier are provisionable attributes of the G832 component.
INT lpE3G832UnexpectedPayloadType	1.3.6.1.4.1.562.2.4.1.12.6.3.11.1.1	INTEGER	read-only	This attribute displays whether the Unexpected Payload Type (UPT) alarm state has been entered. The UPT alarm state is entered when UPT defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The UPT defect is reported when a received frame fails to agree with the expected Payload Type. If the UPT defects are intermittently occurring, the UPT defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle.. The UPT alarm is cleared when the Payload Type in the received frame agrees with the expected Payload Type for a period of 10 seconds +/- 0.5 seconds. The unexpectedPayloadType attribute is always set to off when the E3 component has been locked and left offline.
INT lpE3IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.6.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT lpE3LofAlarm	1.3.6.1.4.1.562.2.4.1.12.6.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely Errored Frame (SEF) defects have been detected and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An E3 SEF defect is reported after detecting Frame Alignment Signal (FAS) errors on 4 consecutive E3 frames received on the incoming line. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when E3 framing has been achieved for a period of 10 seconds +/- 0.5 seconds. As long as SEF defects are detected, the node also transmits the far-end SEF/AIS (in G.751 E3) or FERF (in G.832) defect indicator over the outgoing line. The txRai attribute is set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT lpE3LosAlarm	1.3.6.1.4.1.562.2.4.1.12.6.16.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects has been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is detected at the E3 line interface upon observing N continuous pulse positions with no pulses of either positive or negative polarity, where N is between 10 and 255. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared when the LOS defects are absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT lpE3Mapping	1.3.6.1.4.1.562.2.4.1.12.6.10.1.4	INTEGER	read-write	This attribute indicates if ATM cells will be mapped directly into the E3 payload, or whether PLCP mapping will be used. The PLCP component will appear under the E3 component when this attribute is set to plcp. This attribute will be ignored when set on frame- based cards.
INT lpE3OperationalState	1.3.6.1.4.1.562.2.4.1.12.6.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpE3PlcpLofAlarm	1.3.6.1.4.1.562.2.4.1.12.6.4.10.1.1	INTEGER	read-only	This attribute displays whether a PLCP Loss Of Frame (LOF) failure alarm state has been entered. An LOF failure is declared when a PLCP LOF defect persists for 2.5 s +/- 0.5 s. An LOF defect occurs when an OOF (Out of Frame) state persists for more than 1 ms. If the OOF events are intermittent, the LOF defect counter is decremented at a rate of 1/12 (for DS3 PLCP) or 1/9 (for G.751 E3 PLCP) of the incrementing rate, with all measurements based on a 200 ms polling cycle. An OOF event (also known as a PLCP SEF event) is declared when an error is detected in both the A1 and A2 octets, or when two consecutive POHIDs are found in error. OOF is removed when two valid sets of framing octets and two valid and sequential POHID octets have been found. The LOF defect is removed when the defect counter reaches zero, i.e. when OOF events are absent for more than 12 ms (DS3 PLCP) or 9 ms (G.751 E3 PLCP). LOF failure alarm is cleared when LOF defect is absent for 10.0 s +/- 0.5 s The DS3 or E3 component goes into an operational state of disabled until the LOF failure alarm is cleared. The terminal declaring the LOF failure alarm will transmit a PLCP RAI signal to the far-end for the duration of the alarm. The lofAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
INT lpE3PlcpRxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.6.4.10.1.2	INTEGER	read-only	This attribute displays whether a PLCP Remote Alarm Indication (RAI) failure alarm state has been entered. An RAI failure alarm occurs when ten consecutive PLCP RAI bits (bit 5 in the G1 byte) are high on the incoming line. An RAI failure alarm is cleared when ten consecutive RAI bits are set to 0. Note: Some standards call this alarm RFI. The rxRaiAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
INT lpE3RxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.6.16.1.3	INTEGER	read-only	This attribute displays whether an Alarm Indication Signal (AIS) alarm when state has been entered. An AIS alarm state is entered when AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the incoming E3 line. An AIS defect is the occurrence of the AIS (unframed signal with a density of zeros below a certain threshold such as defined by ITU Recommendation G.775). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/ 10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the AIS alarm condition is cleared (after AIS has been no longer detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS is detected on the incoming line, the node also transmits the far-end SEF/AIS (in G.751 E3) or FERF (in G.832) defect indicator over the outgoing line. The txRai attribute is set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT lpE3RxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.6.16.1.4	INTEGER	read-only	This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. A RAI alarm state is entered when far- end SEF/AIS defects (or Far-End Receive Failure (FERF) defects in G.832 E3 Framing mode) have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the E3 incoming line. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the RAI alarm condition is cleared. The condition is cleared when the far-end defect indicator has not been detected for 10 seconds +/- 0.5 seconds. The declaration of a RAI Alarm is usually a signal that the far end facility is unable to gain synchronization. The rxRaiAlarm attribute is always set to off when the component has been locked and left offline.
INT lpE3SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.6.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpE3StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.6.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpE3TestAdminState	1.3.6.1.4.1.562.2.4.1.12.6.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpE3TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
INT lpE3TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT lpE3TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.6.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpE3TestType	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpE3TestUsageState	1.3.6.1.4.1.562.2.4.1.12.6.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpE3TxAis	1.3.6.1.4.1.562.2.4.1.12.6.16.1.5	INTEGER	read-only	This attribute displays whether an AIS alarm is being transmitted on the E3 line. AIS is transmitted on the outgoing line when the E3 component is locked and not used for operational testing.
INT lpE3TxRai	1.3.6.1.4.1.562.2.4.1.12.6.16.1.6	INTEGER	read-only	This attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the E3 component has been unlocked or used in operational testing. When the E3 component is locked and not used in operational testing, this attribute is always set to off. The far-end SEF/AIS defect indicator is transmitted over the outgoing line when SEF/AIS defects are detected on the incoming line. In G.832 E3 Framing mode, the FERF bit is set to '1' to transmit the SEF/AIS defect indicator.
INT lpE3UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.6.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpE3UsageState	1.3.6.1.4.1.562.2.4.1.12.6.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpEngDsIndex	1.3.6.1.4.1.562.2.4.1.12.23.2.1.1.10	INTEGER	not-accessible	This variable represents the index for the lpEngDs tables.
INT lpHssiActualLinkMode	1.3.6.1.4.1.562.2.4.1.12.17.16.1.1	INTEGER	read-only	This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The port behaves as a dce or dte according to the actualLinkMode.
INT lpHssiAdminState	1.3.6.1.4.1.562.2.4.1.12.17.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpHssiIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.17.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT lpHssiLinkMode	1.3.6.1.4.1.562.2.4.1.12.17.10.1.1	INTEGER	read-write	This attribute defines the intended gender of the HSSI port. The actual gender of the port is determined by the hardware setup. In dte mode, the ta line signal is driven as specified by the attribute readyLineState when the HSSI port passes its diagnostics. The ta line signal is then driven as specified by the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signal ca is compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified input line states are observed. In dce mode, the Hssi component behaves similarly as when it is in dte mode. However, it will be driving the dce line signal (ca) and monitoring the dte line signal (ta) as specified by the attributes readyLineState and dataTransferLineState.
INT lpHssiOperationalState	1.3.6.1.4.1.562.2.4.1.12.17.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpHssiSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.17.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpHssiStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.17.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpHssiTestAdminState	1.3.6.1.4.1.562.2.4.1.12.17.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpHssiTestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
INT lpHssiTestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT lpHssiTestOperationalState	1.3.6.1.4.1.562.2.4.1.12.17.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpHssiTestType	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpHssiTestUsageState	1.3.6.1.4.1.562.2.4.1.12.17.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpHssiUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.17.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpHssiUsageState	1.3.6.1.4.1.562.2.4.1.12.17.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpJT2AdminState	1.3.6.1.4.1.562.2.4.1.12.16.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpJT2CellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.16.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
INT lpJT2CellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.16.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
INT lpJT2CellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.16.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT lpJT2ClockingSource	1.3.6.1.4.1.562.2.4.1.12.16.11.1.1	INTEGER	read-write	This attribute defines the source of the transmit clock for the JT2 line. When the clocking source is selected from local, the oscillator on the port generates the clocking for the line. When the clocking source is selected from line, the port synchronizes to the clock recovered from the incoming line signal. When the clocking source is selected from module, the port's clock synchronizes to the clock provided by the oscillator on the active CP. Note:- that when one port is set to local, the other port must also be set to local, and when one port is set to module, the other port must also be set to module. If one of the ports is set to line, the other port must be set to otherPort. Also, if a CP reference clock is available when the JT2 component is added, the clocking source defaults to module, whereas if a CP reference clock is not available when the component is added, the clocking source defaults to local.
INT lpJT2IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.16.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT lpJT2LofAlarm	1.3.6.1.4.1.562.2.4.1.12.16.15.1.2	INTEGER	read-only	This attribute indicates whether a LOF (Loss of Frame) alarm state is entered. A LOF alarm state is entered when LOF defects are observed and accumulated for 2.5 seconds +/- 0.5 seconds or more. A LOF defect occurs when seven or more consecutive incorrect frame alignment patterns (4 multiframes) are received. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The LOF alarm is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled for the duration of the LOF alarm condition. While the port is in the LOF alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT lpJT2LosAlarm	1.3.6.1.4.1.562.2.4.1.12.16.15.1.1	INTEGER	read-only	This attribute displays whether a LOS (Loss of Signal) alarm state is entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is declared at the JT2 line interface when the input data is zero for 20 - 32 clock cycles. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. An LOS failure alarm is cleared when the LOS defect is absent for a period of 10 seconds +/- 0.5 seconds. The JT2 port goes into an operationalState of disabled for the duration of the LOS alarm condition. While the port is in the LOS alarm state, the port also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT lpJT2OperationalState	1.3.6.1.4.1.562.2.4.1.12.16.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpJT2RxAisPayloadAlarm	1.3.6.1.4.1.562.2.4.1.12.16.15.1.4	INTEGER	read-only	This attribute indicates whether a Payload AIS alarm state is entered. A Payload AIS alarm state is entered when a Payload AIS defect persists for a period of 2.5 seconds +/- 0.5 seconds. A Payload AIS defect is declared when the incoming signal of the 6312 kbit/s frame payload (TS1 - TS96) has two or less zeros in a sequence of 3,072 bits (0.5 ms). If the payload AIS defects are intermittently occurring, the payload AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. A Payload AIS failure alarm is cleared when the Payload AIS defect is absent for a period of 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled until the AIS alarm condition is cleared. While the port is in the Payload AIS alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT lpJT2RxAisPhysicalAlarm	1.3.6.1.4.1.562.2.4.1.12.16.15.1.3	INTEGER	read-only	This attribute indicates whether a Physical AIS alarm state is entered. A Physical AIS alarm state is entered when a Physical AIS defect is observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. A Physical AIS defect is declared when the incoming signal has two or less zeros in a sequence of 3,156 bits (0.5 ms). If the physical AIS defects are intermittently occurring, the physical AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. A Physical AIS alarm is cleared when the Physical AIS defect is absent for a period of 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled until the AIS alarm condition is cleared. While the port is in the Physical AIS alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT lpJT2RxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.16.15.1.5	INTEGER	read-only	This attribute indicates whether a Received RAI alarm state is entered. A received RAI alarm state is entered when the RAI signal is detected on the incoming JT2 Line (when 16 or more consecutive RAI patterns of 1111111100000000 are received on the 4 kbit/s data channel (m-bits) within the framing bits of the JT2 frame). The JT2 port goes into an operationalState of Disabled until the RAI alarm condition is cleared. The RAI alarm is cleared when four or more consecutive non-RAI patterns (anything other than 1111111100000000) are received.
INT lpJT2SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.16.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpJT2StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.16.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpJT2TestAdminState	1.3.6.1.4.1.562.2.4.1.12.16.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpJT2TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
INT lpJT2TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT lpJT2TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.16.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpJT2TestType	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpJT2TestUsageState	1.3.6.1.4.1.562.2.4.1.12.16.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpJT2TxAisPhysicalAlarm	1.3.6.1.4.1.562.2.4.1.12.16.15.1.6	INTEGER	read-only	This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the outgoing JT2 line. Currently the JT2 port only transmits a Physical AIS (no Payload AIS) on the outgoing JT2 line. Since there is no Idle signal defined for JT2, the AIS signal is transmitted when the JT2 port is in the operationalState of locked. The AIS signal may also be transmitted for diagnostic testing.
INT lpJT2TxRaiAlarm	1.3.6.1.4.1.562.2.4.1.12.16.15.1.7	INTEGER	read-only	This attribute indicates whether an RAI defect indication pattern is being sent on the out-going JT2 line. The RAI alarm pattern is transmitted in the 4 kbit/s data channel (m-bits) when the port detects a LOS, AIS or LOF alarm condition.
INT lpJT2UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.16.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpJT2UsageState	1.3.6.1.4.1.562.2.4.1.12.16.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpMainCardStatus	1.3.6.1.4.1.562.2.4.1.12.103.1.2	INTEGER	read-only	This attribute specifies the status of this LP's main card. The following values have been defined: notProvisioned No main card has been provisioned notAvailable The main card is not available available The main card is available (running as standby) active The main card is running as active
INT lpMemoryCapacityIndex	1.3.6.1.4.1.562.2.4.1.12.244.1.1	INTEGER	not-accessible	This variable represents the lpMemoryCapacityTable specific index for the lpMemoryCapacityTable.
INT lpMemoryUsageAvgIndex	1.3.6.1.4.1.562.2.4.1.12.276.1.1	INTEGER	not-accessible	This variable represents the lpMemoryUsageAvgTable specific index for the lpMemoryUsageAvgTable.
INT lpMemoryUsageAvgMaxIndex	1.3.6.1.4.1.562.2.4.1.12.278.1.1	INTEGER	not-accessible	This variable represents the lpMemoryUsageAvgMaxTable specific index for the lpMemoryUsageAvgMaxTable.
INT lpMemoryUsageAvgMinIndex	1.3.6.1.4.1.562.2.4.1.12.277.1.1	INTEGER	not-accessible	This variable represents the lpMemoryUsageAvgMinTable specific index for the lpMemoryUsageAvgMinTable.
INT lpMemoryUsageIndex	1.3.6.1.4.1.562.2.4.1.12.245.1.1	INTEGER	not-accessible	This variable represents the lpMemoryUsageTable specific index for the lpMemoryUsageTable.
INT lpOperationalState	1.3.6.1.4.1.562.2.4.1.12.102.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpRestartOnCpSwitch	1.3.6.1.4.1.562.2.4.1.12.103.1.4	INTEGER	read-only	This attribute indicates whether the Lp always restarts upon a CP switchover. The value is true if the featureList of the associated Sw Lpt component contains a feature that does not support hitless CP switchover. The value is also true when the feature noHitlessCpSwitch is provisioned on the CP. A value of false does not guarantee 'no restart'; dynamic conditions may still result in an FP restart when a CP switchover occurs.
INT lpSdhAdminState	1.3.6.1.4.1.562.2.4.1.12.15.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpSdhClockingSource	1.3.6.1.4.1.562.2.4.1.12.15.10.1.1	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the OC-3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means the use of a signal phase-locked to the incoming OC-3 line rate; module means the use of a signal phase-locked to the CP reference clock. When adding a Sonet/Sdh component, the clockingSource attribute is set to module if the NetworkSynchronization component has been added and is set to local otherwise. Note that the multiport OC-3 cell-based cards has one common clock source for each of the three ports when either the clocking source local or module is selected. For this reason, it is not allowed to have at the same time the clockingSource attribute set to local on one port and module on another port. Furthermore, the clockingSource attribute cannot be set to module if the NetworkSynchronization component has not been added.
INT lpSdhIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.15.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT lpSdhLofAlarm	1.3.6.1.4.1.562.2.4.1.12.15.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when LOF defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, except when an LOS defect or failure is present. An LOF defect is detected when getting contiguous errored frame alignment for at least 3 msec. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSdhLosAlarm	1.3.6.1.4.1.562.2.4.1.12.15.16.1.1	INTEGER	read-only	This attribute indicates whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, or if an LOS defect is present when the criteria for LOF failure declaration have been met. A LOS defect is declared when 20+/-3 us of all-zeros pattern is detected. The LOS defect is cleared when two valid framing words are detected and no Loss Of Signal condition is detected during an interval of 20+/-3 us. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSdhOperationalState	1.3.6.1.4.1.562.2.4.1.12.15.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpSdhPathAdminState	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpSdhPathCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.15.2.2.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
INT lpSdhPathCellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.15.2.2.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
INT lpSdhPathCellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.15.2.2.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT lpSdhPathIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT lpSdhPathLopAlarm	1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOP defect occurs when no valid SPE or VC pointer was received in 8 contiguous frames. If the LOP defects are intermittently occurring, the LOP defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the LOP alarm condition is cleared. The condition is cleared when no more invalid pointer has been reported for 10 seconds +/- 0.5 seconds. The lopAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSdhPathOperationalState	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpSdhPathRxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.2	INTEGER	read-only	This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the occurrence of the P-AIS signal in three contiguous valid STS or STM frames (all one's in bytes H1 and H2). If the P-AIS defects are intermittently occurring, the P-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-AIS alarm condition is cleared. The condition is cleared after no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSdhPathRxRfiAlarm	1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.3	INTEGER	read-only	This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is entered when Path Remote Defect Indicator (P-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-RDI defect is the occurrence of the P-RDI signal in five contiguous valid STS or STM frames (bit 5 of the G1 byte set to 1). If the P-RDI defects are intermittently occurring, the P-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10)with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-RFI alarm condition is cleared. The condition is cleared after no P-RDI defect has been detected for 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSdhPathSignalLabelMismatch	1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.4	INTEGER	read-only	This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM defects have been observed and accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM defect occurs when detecting an unexpected path signal label. The expected Path signal labels are 'Mapping for ATM' or 'Equipped - Non Specific Payload'. If the P-SLM defects are intermittently occurring, the P-SLM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the Path Signal Label Mismatch failure condition is cleared. The condition is cleared when an expected path signal label is received for 10 seconds +/- 0.5 seconds. The signalLabelMismatch attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSdhPathSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpSdhPathStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpSdhPathTxAis	1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.5	INTEGER	read-only	This attribute displays whether the Path Alarm Indication Signal (P- AIS) signal is being transmitted on the path. The P-AIS signal is transmitted when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSdhPathTxRdi	1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.6	INTEGER	read-only	This attribute displays whether the Path Remote Defect Indicator (P-RDI) signal is being transmitted over the path signal. The P-RDI signal is transmitted over the outgoing line upon detection of LOP, P-AIS or the occurrence of the LCD state. This attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSdhPathUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpSdhPathUsageState	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpSdhRxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.15.16.1.3	INTEGER	read-only	This attribute displays whether a Line Alarm Indication Signal (L- AIS) alarm state has been entered. An L-AIS alarm state is entered when L-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-AIS defect is the occurrence of the L-AIS signal in five contiguous STS (STM) frames (111 pattern in bits 6,7, and 8 of the K2 bytes). If the L-AIS defects are intermittently occurring, the L-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-AIS alarm condition is cleared. The condition is cleared after not detecting the L-AIS signal for a period of 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSdhRxRfiAlarm	1.3.6.1.4.1.562.2.4.1.12.15.16.1.4	INTEGER	read-only	This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure Indication (L-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-RDI defect is the occurrence of the L-RDI signal in five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and 8 of the K2 bytes). If the L-RDI defects are intermittently occurring, the L-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-RFI alarm condition is cleared. The condition is cleared after not detecting the L-RDI signal for a period of 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSdhSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.15.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpSdhStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.15.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpSdhTestAdminState	1.3.6.1.4.1.562.2.4.1.12.15.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpSdhTestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
INT lpSdhTestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT lpSdhTestOperationalState	1.3.6.1.4.1.562.2.4.1.12.15.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpSdhTestType	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpSdhTestUsageState	1.3.6.1.4.1.562.2.4.1.12.15.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpSdhTxAis	1.3.6.1.4.1.562.2.4.1.12.15.16.1.5	INTEGER	read-only	This attribute displays whether the Line Alarm Indication Signal (L- AIS) signal is being transmitted on the outgoing line. This signal is transmitted when the Sonet/Sdh is locked and left offline.
INT lpSdhTxRdi	1.3.6.1.4.1.562.2.4.1.12.15.16.1.6	INTEGER	read-only	This attribute displays whether the Line Remote Defect Indicator (L-RDI) signal is being transmitted over the OC-3 line. The L-RDI signal is transmitted upon the detection of the LOS, LOF or L-AIS defect. This attribute is always set to off when the component has been locked and left offline.
INT lpSdhUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.15.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpSdhUnusableTxClockRefAlarm	1.3.6.1.4.1.562.2.4.1.12.15.16.1.7	INTEGER	read-only	This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is entered when a Sonet/Sdh port provisioned to act as a transmit clock reference has received the code 'do not use for synchronization' in the S1 byte (in the SONET/ SDH line overhead) for 2.5 +/- 0.5 seconds. The condition is cleared after not detecting the 'do not use for synchronization' code for a period of 10 +/- 0.5 seconds or when the port is no longer provisioned to act as a transmit clock reference. A port is acting as a transmit clock reference if it is provisioned with a) a clockingSource of line, or b) it has been provisioned as a primaryReference, secondaryReference or tertiaryReference in the NetworkSynchronization component. The unusableTxClockRefAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSdhUsageState	1.3.6.1.4.1.562.2.4.1.12.15.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpSonetAdminState	1.3.6.1.4.1.562.2.4.1.12.14.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpSonetClockingSource	1.3.6.1.4.1.562.2.4.1.12.14.10.1.1	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the OC-3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means the use of a signal phase-locked to the incoming OC-3 line rate; module means the use of a signal phase-locked to the CP reference clock. When adding a Sonet/Sdh component, the clockingSource attribute is set to module if the NetworkSynchronization component has been added and is set to local otherwise. Note that the multiport OC-3 cell-based cards has one common clock source for each of the three ports when either the clocking source local or module is selected. For this reason, it is not allowed to have at the same time the clockingSource attribute set to local on one port and module on another port. Furthermore, the clockingSource attribute cannot be set to module if the NetworkSynchronization component has not been added.
INT lpSonetIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.14.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT lpSonetLofAlarm	1.3.6.1.4.1.562.2.4.1.12.14.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when LOF defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, except when an LOS defect or failure is present. An LOF defect is detected when getting contiguous errored frame alignment for at least 3 msec. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSonetLosAlarm	1.3.6.1.4.1.562.2.4.1.12.14.16.1.1	INTEGER	read-only	This attribute indicates whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, or if an LOS defect is present when the criteria for LOF failure declaration have been met. A LOS defect is declared when 20+/-3 us of all-zeros pattern is detected. The LOS defect is cleared when two valid framing words are detected and no Loss Of Signal condition is detected during an interval of 20+/-3 us. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSonetOperationalState	1.3.6.1.4.1.562.2.4.1.12.14.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpSonetPathAdminState	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpSonetPathCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.2.4.1.12.14.2.2.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
INT lpSonetPathCellLcdAlarm	1.3.6.1.4.1.562.2.4.1.12.14.2.2.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
INT lpSonetPathCellScrambleCellPayload	1.3.6.1.4.1.562.2.4.1.12.14.2.2.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT lpSonetPathIfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT lpSonetPathLopAlarm	1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOP defect occurs when no valid SPE or VC pointer was received in 8 contiguous frames. If the LOP defects are intermittently occurring, the LOP defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the LOP alarm condition is cleared. The condition is cleared when no more invalid pointer has been reported for 10 seconds +/- 0.5 seconds. The lopAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSonetPathOperationalState	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpSonetPathRxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.2	INTEGER	read-only	This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the occurrence of the P-AIS signal in three contiguous valid STS or STM frames (all one's in bytes H1 and H2). If the P-AIS defects are intermittently occurring, the P-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-AIS alarm condition is cleared. The condition is cleared after no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSonetPathRxRfiAlarm	1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.3	INTEGER	read-only	This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is entered when Path Remote Defect Indicator (P-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-RDI defect is the occurrence of the P-RDI signal in five contiguous valid STS or STM frames (bit 5 of the G1 byte set to 1). If the P-RDI defects are intermittently occurring, the P-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10)with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-RFI alarm condition is cleared. The condition is cleared after no P-RDI defect has been detected for 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSonetPathSignalLabelMismatch	1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.4	INTEGER	read-only	This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM defects have been observed and accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM defect occurs when detecting an unexpected path signal label. The expected Path signal labels are 'Mapping for ATM' or 'Equipped - Non Specific Payload'. If the P-SLM defects are intermittently occurring, the P-SLM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the Path Signal Label Mismatch failure condition is cleared. The condition is cleared when an expected path signal label is received for 10 seconds +/- 0.5 seconds. The signalLabelMismatch attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSonetPathSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpSonetPathStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpSonetPathTxAis	1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.5	INTEGER	read-only	This attribute displays whether the Path Alarm Indication Signal (P- AIS) signal is being transmitted on the path. The P-AIS signal is transmitted when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSonetPathTxRdi	1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.6	INTEGER	read-only	This attribute displays whether the Path Remote Defect Indicator (P-RDI) signal is being transmitted over the path signal. The P-RDI signal is transmitted over the outgoing line upon detection of LOP, P-AIS or the occurrence of the LCD state. This attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT lpSonetPathUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpSonetPathUsageState	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpSonetRxAisAlarm	1.3.6.1.4.1.562.2.4.1.12.14.16.1.3	INTEGER	read-only	This attribute displays whether a Line Alarm Indication Signal (L- AIS) alarm state has been entered. An L-AIS alarm state is entered when L-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-AIS defect is the occurrence of the L-AIS signal in five contiguous STS (STM) frames (111 pattern in bits 6,7, and 8 of the K2 bytes). If the L-AIS defects are intermittently occurring, the L-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-AIS alarm condition is cleared. The condition is cleared after not detecting the L-AIS signal for a period of 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSonetRxRfiAlarm	1.3.6.1.4.1.562.2.4.1.12.14.16.1.4	INTEGER	read-only	This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure Indication (L-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-RDI defect is the occurrence of the L-RDI signal in five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and 8 of the K2 bytes). If the L-RDI defects are intermittently occurring, the L-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-RFI alarm condition is cleared. The condition is cleared after not detecting the L-RDI signal for a period of 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSonetSnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.14.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpSonetStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.14.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpSonetTestAdminState	1.3.6.1.4.1.562.2.4.1.12.14.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpSonetTestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
INT lpSonetTestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT lpSonetTestOperationalState	1.3.6.1.4.1.562.2.4.1.12.14.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpSonetTestType	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpSonetTestUsageState	1.3.6.1.4.1.562.2.4.1.12.14.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpSonetTxAis	1.3.6.1.4.1.562.2.4.1.12.14.16.1.5	INTEGER	read-only	This attribute displays whether the Line Alarm Indication Signal (L- AIS) signal is being transmitted on the outgoing line. This signal is transmitted when the Sonet/Sdh is locked and left offline.
INT lpSonetTxRdi	1.3.6.1.4.1.562.2.4.1.12.14.16.1.6	INTEGER	read-only	This attribute displays whether the Line Remote Defect Indicator (L-RDI) signal is being transmitted over the OC-3 line. The L-RDI signal is transmitted upon the detection of the LOS, LOF or L-AIS defect. This attribute is always set to off when the component has been locked and left offline.
INT lpSonetUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.14.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpSonetUnusableTxClockRefAlarm	1.3.6.1.4.1.562.2.4.1.12.14.16.1.7	INTEGER	read-only	This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is entered when a Sonet/Sdh port provisioned to act as a transmit clock reference has received the code 'do not use for synchronization' in the S1 byte (in the SONET/ SDH line overhead) for 2.5 +/- 0.5 seconds. The condition is cleared after not detecting the 'do not use for synchronization' code for a period of 10 +/- 0.5 seconds or when the port is no longer provisioned to act as a transmit clock reference. A port is acting as a transmit clock reference if it is provisioned with a) a clockingSource of line, or b) it has been provisioned as a primaryReference, secondaryReference or tertiaryReference in the NetworkSynchronization component. The unusableTxClockRefAlarm attribute is always set to off when the component has been locked and left offline.
INT lpSonetUsageState	1.3.6.1.4.1.562.2.4.1.12.14.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpSpareCardStatus	1.3.6.1.4.1.562.2.4.1.12.103.1.3	INTEGER	read-only	This attribute specifies the status of this LP's spare card. The following values have been defined: notProvisioned No spare card has been provisioned notAvailable The spare card is not available alreadyInUse The spare card is already in use by another LP available The spare card is available (running as standby) active The spare card is running as active
INT lpStandbyStatus	1.3.6.1.4.1.562.2.4.1.12.102.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpUnknownStatus	1.3.6.1.4.1.562.2.4.1.12.102.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpUsageState	1.3.6.1.4.1.562.2.4.1.12.102.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpV35ActualLinkMode	1.3.6.1.4.1.562.2.4.1.12.9.16.1.1	INTEGER	read-only	This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The interface behaves as a DCE or DTE according to the actualLinkMode.
INT lpV35AdminState	1.3.6.1.4.1.562.2.4.1.12.9.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpV35ClockingSource	1.3.6.1.4.1.562.2.4.1.12.9.10.1.6	INTEGER	read-write	This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the attribute is local, the outgoing clocks are synchronized to a local oscillator on the FP. If the value of the attribute is module, the outgoing clocks are synchronized to the oscillator on the active CP.
INT lpV35DteDataClockSource	1.3.6.1.4.1.562.2.4.1.12.9.10.1.7	INTEGER	read-write	This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. A DTE interface uses TSET(DCE) and RSET(DCE) for timing. If the value of the attribute is fromDce, the DCE uses the internally generated transmit clock to supply both TSET(DCE) and RSET(DCE). If the value of the attribute is fromDte, the DCE still uses the internally generated transmit clock to supply TSET(DCE), but the receive timing is derived from TSET(DTE) on the link. The fromDte mode is recommended when the DTE is far away from the DCE interface. Note that TSET(DTE) is CCITT V.24 circuit 113; TSET(DCE) is CCITT V.24 circuit 114; and RSET(DCE) is CCITT V.24 circuit 115.
INT lpV35EnableDynamicSpeed	1.3.6.1.4.1.562.2.4.1.12.9.10.1.9	INTEGER	read-write	When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This attribute can be set to yes only if the linkMode is dce and the dteDataClockSource is fromDte.
INT lpV35IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.9.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT lpV35LinkMode	1.3.6.1.4.1.562.2.4.1.12.9.10.1.1	INTEGER	read-write	This attribute defines the intended gender of the V.35 interface. The actual gender of the interface is determined by the physical connection to the patch panel. If the hardware setup does not match this attribute, an alarm will be generated. In dte mode, the RTS line signal is driven as specified by the attribute readyLineState when the interface passes its initial diagnostics. Then, the RTS line signal will be driven as specified in the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signals (RFS, DSR, and DCD) are compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified input line states are observed. In dce mode, the V35 component behaves similarly as when it is in dte mode. However, it will be driving the DCE line signals (RFS, DSR, and DCD) and monitoring the DTE line signal (RTS) as specified by the attributes readyLineState and dataTransferLineState.
INT lpV35OperationalState	1.3.6.1.4.1.562.2.4.1.12.9.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpV35SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.9.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpV35StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.9.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpV35TestAdminState	1.3.6.1.4.1.562.2.4.1.12.9.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpV35TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
INT lpV35TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT lpV35TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.9.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpV35TestType	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpV35TestUsageState	1.3.6.1.4.1.562.2.4.1.12.9.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpV35UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.9.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpV35UsageState	1.3.6.1.4.1.562.2.4.1.12.9.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpX21ActualLinkMode	1.3.6.1.4.1.562.2.4.1.12.10.16.1.1	INTEGER	read-only	This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The interface behaves as a DCE or DTE according to the actualLinkMode.
INT lpX21AdminState	1.3.6.1.4.1.562.2.4.1.12.10.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpX21ClockingSource	1.3.6.1.4.1.562.2.4.1.12.10.10.1.6	INTEGER	read-write	This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the attribute is local, the outgoing clocks are synchronized to a local oscillator on the FP. If the value of the attribute is module, the outgoing clocks are synchronized to the oscillator on the active CP.
INT lpX21DteDataClockSource	1.3.6.1.4.1.562.2.4.1.12.10.10.1.7	INTEGER	read-write	This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. Note that a V.11 DTE interface uses the S clock (see X.21 standard) for both receive data and transmit data timing. The DTE interface always loops the received S clock back to the DCE as the X clock (see X.21 standard). If the value of the attribute is fromDce, the DCE V.11 interface uses the internally generated transmit clock as the S clock and for both receive and transmit data timing. The X clock is ignored. If the value of the attribute is fromDte, the DCE still uses the internally generated transmit clock as the S clock and for transmit data timing, but the receive data timing is derived from the X clock. The fromDte mode is recommended when the DTE is far away from the DCE interface.
INT lpX21EnableDynamicSpeed	1.3.6.1.4.1.562.2.4.1.12.10.10.1.10	INTEGER	read-write	When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This attribute can be set to yes only if the linkMode is dce and the dteDataClockSource is fromDte..
INT lpX21IfAdminStatus	1.3.6.1.4.1.562.2.4.1.12.10.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT lpX21LineTerminationRequired	1.3.6.1.4.1.562.2.4.1.12.10.10.1.8	INTEGER	read-write	This attribute specifies whether termination is required for this interface. If the hardware setup does not match this attribute, an alarm will be generated.
INT lpX21LinkMode	1.3.6.1.4.1.562.2.4.1.12.10.10.1.1	INTEGER	read-write	This attribute defines the intended gender of the X21 component (V.11 interface). The actual gender of the interface is determined by the physical connection to the patch panel. If the hardware setup does not match this attribute, an alarm will be generated. In dte mode, the control line signal is driven as specified by the attribute readyLineState when the interface passes its initial diagnostics. Then, the control line signal will be driven as specified in the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signal (indication) is compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified line states are observed. In dce mode, the X21 component behaves similarly as when it is in dte mode. However, it will be driving the DCE line signal (control) and monitoring the DTE line signal (indication) as specified by the attributes readyLineState and dataTransferLineState.
INT lpX21OperationalState	1.3.6.1.4.1.562.2.4.1.12.10.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT lpX21SnmpOperStatus	1.3.6.1.4.1.562.2.4.1.12.10.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT lpX21StandbyStatus	1.3.6.1.4.1.562.2.4.1.12.10.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT lpX21TestAdminState	1.3.6.1.4.1.562.2.4.1.12.10.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT lpX21TestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.3	INTEGER	read-only	This attribute records the reason the test is terminated.
INT lpX21TestFrmPatternType	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT lpX21TestOperationalState	1.3.6.1.4.1.562.2.4.1.12.10.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT lpX21TestType	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT lpX21TestUsageState	1.3.6.1.4.1.562.2.4.1.12.10.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT lpX21UnknownStatus	1.3.6.1.4.1.562.2.4.1.12.10.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT lpX21UsageState	1.3.6.1.4.1.562.2.4.1.12.10.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Integer32 (17)
I32 lpDS1ChanIndex	1.3.6.1.4.1.562.2.4.1.12.7.2.1.1.10	Integer32	not-accessible	This variable represents the index for the lpDS1Chan tables.
I32 lpDS1Index	1.3.6.1.4.1.562.2.4.1.12.7.1.1.10	Integer32	not-accessible	This variable represents the index for the lpDS1 tables.
I32 lpDS3DS1ChanIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1.10	Integer32	not-accessible	This variable represents the index for the lpDS3DS1Chan tables.
I32 lpDS3DS1Index	1.3.6.1.4.1.562.2.4.1.12.5.6.1.1.10	Integer32	not-accessible	This variable represents the index for the lpDS3DS1 tables.
I32 lpDS3Index	1.3.6.1.4.1.562.2.4.1.12.5.1.1.10	Integer32	not-accessible	This variable represents the index for the lpDS3 tables.
I32 lpE1ChanIndex	1.3.6.1.4.1.562.2.4.1.12.8.2.1.1.10	Integer32	not-accessible	This variable represents the index for the lpE1Chan tables.
I32 lpE1Index	1.3.6.1.4.1.562.2.4.1.12.8.1.1.10	Integer32	not-accessible	This variable represents the index for the lpE1 tables.
I32 lpE3Index	1.3.6.1.4.1.562.2.4.1.12.6.1.1.10	Integer32	not-accessible	This variable represents the index for the lpE3 tables.
I32 lpHssiIndex	1.3.6.1.4.1.562.2.4.1.12.17.1.1.10	Integer32	not-accessible	This variable represents the index for the lpHssi tables.
I32 lpIndex	1.3.6.1.4.1.562.2.4.1.12.1.1.10	Integer32	not-accessible	This variable represents the index for the lp tables.
I32 lpJT2Index	1.3.6.1.4.1.562.2.4.1.12.16.1.1.10	Integer32	not-accessible	This variable represents the index for the lpJT2 tables.
I32 lpSdhIndex	1.3.6.1.4.1.562.2.4.1.12.15.1.1.10	Integer32	not-accessible	This variable represents the index for the lpSdh tables.
I32 lpSdhPathIndex	1.3.6.1.4.1.562.2.4.1.12.15.2.1.1.10	Integer32	not-accessible	This variable represents the index for the lpSdhPath tables.
I32 lpSonetIndex	1.3.6.1.4.1.562.2.4.1.12.14.1.1.10	Integer32	not-accessible	This variable represents the index for the lpSonet tables.
I32 lpSonetPathIndex	1.3.6.1.4.1.562.2.4.1.12.14.2.1.1.10	Integer32	not-accessible	This variable represents the index for the lpSonetPath tables.
I32 lpV35Index	1.3.6.1.4.1.562.2.4.1.12.9.1.1.10	Integer32	not-accessible	This variable represents the index for the lpV35 tables.
I32 lpX21Index	1.3.6.1.4.1.562.2.4.1.12.10.1.1.10	Integer32	not-accessible	This variable represents the index for the lpX21 tables.
InterfaceIndex (16)
NUM lpDS1ChanIfIndex	1.3.6.1.4.1.562.2.4.1.12.7.2.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM lpDS1IfIndex	1.3.6.1.4.1.562.2.4.1.12.7.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM lpDS3DS1ChanIfIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.2.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM lpDS3DS1IfIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM lpDS3IfIndex	1.3.6.1.4.1.562.2.4.1.12.5.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM lpE1ChanIfIndex	1.3.6.1.4.1.562.2.4.1.12.8.2.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM lpE1IfIndex	1.3.6.1.4.1.562.2.4.1.12.8.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM lpE3IfIndex	1.3.6.1.4.1.562.2.4.1.12.6.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM lpHssiIfIndex	1.3.6.1.4.1.562.2.4.1.12.17.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM lpJT2IfIndex	1.3.6.1.4.1.562.2.4.1.12.16.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM lpSdhIfIndex	1.3.6.1.4.1.562.2.4.1.12.15.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM lpSdhPathIfIndex	1.3.6.1.4.1.562.2.4.1.12.15.2.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM lpSonetIfIndex	1.3.6.1.4.1.562.2.4.1.12.14.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM lpSonetPathIfIndex	1.3.6.1.4.1.562.2.4.1.12.14.2.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM lpV35IfIndex	1.3.6.1.4.1.562.2.4.1.12.9.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM lpX21IfIndex	1.3.6.1.4.1.562.2.4.1.12.10.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
Link (15)
LIN lpDS1ChanApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.7.2.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
LIN lpDS3ApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.5.10.1.4	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the DS3 component.
LIN lpDS3DS1ChanApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.5.6.2.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
LIN lpE1ChanApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.8.2.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
LIN lpE3ApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.6.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the E3 component.
LIN lpHssiApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.17.10.1.7	Link	read-write	This attribute contains the component name of a Framer which is associated with the Hssi component.
LIN lpJT2ApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.16.11.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the JT2 component.
LIN lpLinkToApplicationsValue	1.3.6.1.4.1.562.2.4.1.12.242.1.1	Link	read-only	This variable represents both the value and the index for the lpLinkToApplicationsTable.
LIN lpLogicalProcessorType	1.3.6.1.4.1.562.2.4.1.12.100.1.3	Link	read-write	This is the Logical Processor Type (LPT) that determines which software this LP will run.
LIN lpMainCard	1.3.6.1.4.1.562.2.4.1.12.100.1.1	Link	read-write	This is the preferred processor card on which this LP should be assigned.
LIN lpSdhPathApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.15.2.10.1.1	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the Path component.
LIN lpSonetPathApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.14.2.10.1.1	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the Path component.
LIN lpSpareCard	1.3.6.1.4.1.562.2.4.1.12.100.1.2	Link	read-write	This is the spare processor card on which this LP should be assigned.
LIN lpV35ApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.9.10.1.8	Link	read-write	This attribute contains the component name of a Framer which is associated with the V35 component.
LIN lpX21ApplicationFramerName	1.3.6.1.4.1.562.2.4.1.12.10.10.1.9	Link	read-write	This attribute contains the component name of a Framer which is associated with the X21 component.
NonReplicated (35)
NON lpDS1AudioIndex	1.3.6.1.4.1.562.2.4.1.12.7.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS1Audio tables.
NON lpDS1ChanCellIndex	1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS1ChanCell tables.
NON lpDS1ChanTcIndex	1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS1ChanTc tables.
NON lpDS1ChanTestIndex	1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS1ChanTest tables.
NON lpDS1DspIndex	1.3.6.1.4.1.562.2.4.1.12.7.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS1Dsp tables.
NON lpDS1TestIndex	1.3.6.1.4.1.562.2.4.1.12.7.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS1Test tables.
NON lpDS3CBitIndex	1.3.6.1.4.1.562.2.4.1.12.5.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3CBit tables.
NON lpDS3CellIndex	1.3.6.1.4.1.562.2.4.1.12.5.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3Cell tables.
NON lpDS3DS1ChanCellIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3DS1ChanCell tables.
NON lpDS3DS1ChanTcIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3DS1ChanTc tables.
NON lpDS3DS1ChanTestIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3DS1ChanTest tables.
NON lpDS3DS1TestIndex	1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3DS1Test tables.
NON lpDS3PlcpIndex	1.3.6.1.4.1.562.2.4.1.12.5.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3Plcp tables.
NON lpDS3TestIndex	1.3.6.1.4.1.562.2.4.1.12.5.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpDS3Test tables.
NON lpE1AudioIndex	1.3.6.1.4.1.562.2.4.1.12.8.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE1Audio tables.
NON lpE1ChanCellIndex	1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE1ChanCell tables.
NON lpE1ChanTcIndex	1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE1ChanTc tables.
NON lpE1ChanTestIndex	1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE1ChanTest tables.
NON lpE1DspIndex	1.3.6.1.4.1.562.2.4.1.12.8.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE1Dsp tables.
NON lpE1TestIndex	1.3.6.1.4.1.562.2.4.1.12.8.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE1Test tables.
NON lpE3CellIndex	1.3.6.1.4.1.562.2.4.1.12.6.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE3Cell tables.
NON lpE3G832Index	1.3.6.1.4.1.562.2.4.1.12.6.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE3G832 tables.
NON lpE3PlcpIndex	1.3.6.1.4.1.562.2.4.1.12.6.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE3Plcp tables.
NON lpE3TestIndex	1.3.6.1.4.1.562.2.4.1.12.6.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpE3Test tables.
NON lpEngDsOvIndex	1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpEngDsOv tables.
NON lpEngIndex	1.3.6.1.4.1.562.2.4.1.12.23.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpEng tables.
NON lpHssiTestIndex	1.3.6.1.4.1.562.2.4.1.12.17.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpHssiTest tables.
NON lpJT2CellIndex	1.3.6.1.4.1.562.2.4.1.12.16.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpJT2Cell tables.
NON lpJT2TestIndex	1.3.6.1.4.1.562.2.4.1.12.16.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpJT2Test tables.
NON lpSdhPathCellIndex	1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpSdhPathCell tables.
NON lpSdhTestIndex	1.3.6.1.4.1.562.2.4.1.12.15.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpSdhTest tables.
NON lpSonetPathCellIndex	1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpSonetPathCell tables.
NON lpSonetTestIndex	1.3.6.1.4.1.562.2.4.1.12.14.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpSonetTest tables.
NON lpV35TestIndex	1.3.6.1.4.1.562.2.4.1.12.9.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpV35Test tables.
NON lpX21TestIndex	1.3.6.1.4.1.562.2.4.1.12.10.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the lpX21Test tables.
OCTET STRING (82)
OCT lpAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.102.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT lpAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.102.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpControlStatus	1.3.6.1.4.1.562.2.4.1.12.102.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpDS1AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.7.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT lpDS1AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.7.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpDS1ChanAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT lpDS1ChanAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpDS1ChanControlStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpDS1ChanProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpDS1ChanTimeslots	1.3.6.1.4.1.562.2.4.1.12.7.2.10.1.1	OCTET STRING	read-write	This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
OCT lpDS1ControlStatus	1.3.6.1.4.1.562.2.4.1.12.7.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpDS1ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.7.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpDS3AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.5.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT lpDS3AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.5.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpDS3CBitLoopbackAtFarEndRequested	1.3.6.1.4.1.562.2.4.1.12.5.3.10.1.3	OCTET STRING	read-only	This attribute indicates which DS1 tributaries are being looped back, or if the DS3 line is being looped back. Each value listed indicates a loopback request has been made. When a loopback deactivation command has been sent to the far end, the corresponding value will be removed from the list. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) notused29(29) notused30(30) ds3Line(31)
OCT lpDS3CBitLoopedbackToFarEnd	1.3.6.1.4.1.562.2.4.1.12.5.3.10.1.2	OCTET STRING	read-only	This indicates whether or not the DS3 component is currently looping back the incoming DS3 signal or one of its DS1 tributaries to the far-end DS3 terminal. This is activated when the far-end DS3 equipment has ordered the local terminal to do so. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) notused29(29) notused30(30) ds3Line(31)
OCT lpDS3ControlStatus	1.3.6.1.4.1.562.2.4.1.12.5.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpDS3DS1AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT lpDS3DS1AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpDS3DS1ChanAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT lpDS3DS1ChanAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpDS3DS1ChanControlStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpDS3DS1ChanProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpDS3DS1ChanTimeslots	1.3.6.1.4.1.562.2.4.1.12.5.6.2.10.1.1	OCTET STRING	read-write	This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
OCT lpDS3DS1ControlStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpDS3DS1ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpDS3ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.5.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpE1AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.8.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT lpE1AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.8.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpE1ChanAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT lpE1ChanAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpE1ChanControlStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpE1ChanProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpE1ChanTimeslots	1.3.6.1.4.1.562.2.4.1.12.8.2.10.1.1	OCTET STRING	read-write	This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
OCT lpE1ControlStatus	1.3.6.1.4.1.562.2.4.1.12.8.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpE1ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.8.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpE3AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.6.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT lpE3AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.6.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpE3ControlStatus	1.3.6.1.4.1.562.2.4.1.12.6.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpE3ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.6.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpHssiAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.17.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT lpHssiAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.17.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpHssiControlStatus	1.3.6.1.4.1.562.2.4.1.12.17.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpHssiDataTransferLineState	1.3.6.1.4.1.562.2.4.1.12.17.10.1.3	OCTET STRING	read-write	This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both dte and dce signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the operational attribute actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: ca(0) ta(1)
OCT lpHssiLineState	1.3.6.1.4.1.562.2.4.1.12.17.16.1.2	OCTET STRING	read-only	This attribute contains the state of the interface signals. Description of bits: ca(0) ta(1) tm(2) la(3) lb(4)
OCT lpHssiProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.17.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpHssiReadyLineState	1.3.6.1.4.1.562.2.4.1.12.17.10.1.2	OCTET STRING	read-write	This attribute specifies the line signal originating from the HSSI interface that will always be turned on, provided the HSSI interface passes it diagnostics. This set of signal is generally required for maintaining the connection. Note that both dte and dce signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the operational attribute actualLinkMode. See also linkMode. Description of bits: ca(0) ta(1)
OCT lpJT2AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.16.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT lpJT2AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.16.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpJT2ControlStatus	1.3.6.1.4.1.562.2.4.1.12.16.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpJT2ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.16.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.102.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpSdhAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.15.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT lpSdhAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.15.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpSdhControlStatus	1.3.6.1.4.1.562.2.4.1.12.15.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpSdhPathAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT lpSdhPathAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpSdhPathControlStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpSdhPathProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpSdhProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.15.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpSonetAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.14.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT lpSonetAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.14.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpSonetControlStatus	1.3.6.1.4.1.562.2.4.1.12.14.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpSonetPathAlarmStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT lpSonetPathAvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpSonetPathControlStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpSonetPathProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpSonetProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.14.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpV35AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.9.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT lpV35AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.9.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpV35ControlStatus	1.3.6.1.4.1.562.2.4.1.12.9.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpV35DataTransferLineState	1.3.6.1.4.1.562.2.4.1.12.9.10.1.3	OCTET STRING	read-write	This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
OCT lpV35LineState	1.3.6.1.4.1.562.2.4.1.12.9.16.1.2	OCTET STRING	read-only	This attribute contains the current state of the interface signals. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
OCT lpV35ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.9.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpV35ReadyLineState	1.3.6.1.4.1.562.2.4.1.12.9.10.1.2	OCTET STRING	read-write	This attribute specifies the line signals originating from the V.35 interface that will always be turned on, provided the interface passes its diagnostics. This set of signals is generally required for maintaining the connection. Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. See also linkMode. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
OCT lpX21AlarmStatus	1.3.6.1.4.1.562.2.4.1.12.10.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT lpX21AvailabilityStatus	1.3.6.1.4.1.562.2.4.1.12.10.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT lpX21ControlStatus	1.3.6.1.4.1.562.2.4.1.12.10.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT lpX21DataTransferLineState	1.3.6.1.4.1.562.2.4.1.12.10.10.1.3	OCTET STRING	read-write	The state of the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: indication(0) control(1)
OCT lpX21LineState	1.3.6.1.4.1.562.2.4.1.12.10.16.1.2	OCTET STRING	read-only	This attribute contains the current state of the interface signals. Description of bits: indication(0) control(1)
OCT lpX21ProceduralStatus	1.3.6.1.4.1.562.2.4.1.12.10.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT lpX21ReadyLineState	1.3.6.1.4.1.562.2.4.1.12.10.10.1.2	OCTET STRING	read-write	This attribute specifies the line signals originating from the V.11 interface that will always be turned on, provided the interface passes its diagnostics. This set of signals is generally required to maintain the connection. Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. See also linkMode. Description of bits: indication(0) control(1)
PassportCounter64 (98)
NUM lpDS1ChanTestBitsRx	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpDS1ChanTestBitsTx	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpDS1ChanTestBytesRx	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS1ChanTestBytesTx	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpDS1ChanTestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpDS1ChanTestFrmRx	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS1ChanTestFrmTx	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpDS1TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpDS1TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpDS1TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS1TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpDS1TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpDS1TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS1TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpDS3DS1ChanTestBitsRx	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpDS3DS1ChanTestBitsTx	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpDS3DS1ChanTestBytesRx	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS3DS1ChanTestBytesTx	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpDS3DS1ChanTestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpDS3DS1ChanTestFrmRx	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS3DS1ChanTestFrmTx	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpDS3DS1TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpDS3DS1TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpDS3DS1TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS3DS1TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpDS3DS1TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpDS3DS1TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS3DS1TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpDS3TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpDS3TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpDS3TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS3TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpDS3TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpDS3TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpDS3TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpE1ChanTestBitsRx	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpE1ChanTestBitsTx	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpE1ChanTestBytesRx	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpE1ChanTestBytesTx	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpE1ChanTestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpE1ChanTestFrmRx	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpE1ChanTestFrmTx	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpE1TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpE1TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpE1TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpE1TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpE1TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpE1TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpE1TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpE3TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpE3TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpE3TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpE3TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpE3TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpE3TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpE3TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpHssiTestBitsRx	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpHssiTestBitsTx	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpHssiTestBytesRx	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpHssiTestBytesTx	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpHssiTestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpHssiTestFrmRx	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpHssiTestFrmTx	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpJT2TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpJT2TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpJT2TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpJT2TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpJT2TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpJT2TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpJT2TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpSdhTestBitsRx	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpSdhTestBitsTx	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpSdhTestBytesRx	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpSdhTestBytesTx	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpSdhTestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpSdhTestFrmRx	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpSdhTestFrmTx	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpSonetTestBitsRx	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpSonetTestBitsTx	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpSonetTestBytesRx	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpSonetTestBytesTx	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpSonetTestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpSonetTestFrmRx	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpSonetTestFrmTx	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpV35TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpV35TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpV35TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpV35TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpV35TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpV35TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpV35TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM lpX21TestBitsRx	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM lpX21TestBitsTx	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM lpX21TestBytesRx	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpX21TestBytesTx	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM lpX21TestErroredFrmRx	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.10	PassportCounter64	read-only	This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
NUM lpX21TestFrmRx	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM lpX21TestFrmTx	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
RowPointer (1)
NUM lpActiveCard	1.3.6.1.4.1.562.2.4.1.12.103.1.1	RowPointer	read-only	This attribute indicates on which card this LP is currently running (if any).
RowStatus (53)
ROW lpDS1AudioRowStatus	1.3.6.1.4.1.562.2.4.1.12.7.5.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS1Audio components. These components cannot be added nor deleted.
ROW lpDS1ChanCellRowStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS1ChanCell components. These components can be added and deleted.
ROW lpDS1ChanRowStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS1Chan components. These components can be added and deleted.
ROW lpDS1ChanTcRowStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS1ChanTc components. These components can be added and deleted.
ROW lpDS1ChanTestRowStatus	1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS1ChanTest components. These components cannot be added nor deleted.
ROW lpDS1DspRowStatus	1.3.6.1.4.1.562.2.4.1.12.7.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS1Dsp components. These components cannot be added nor deleted.
ROW lpDS1RowStatus	1.3.6.1.4.1.562.2.4.1.12.7.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS1 components. These components can be added and deleted.
ROW lpDS1TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.7.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS1Test components. These components cannot be added nor deleted.
ROW lpDS3CBitRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS3CBit components. These components cannot be added nor deleted.
ROW lpDS3CellRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS3Cell components. These components can be added and deleted.
ROW lpDS3DS1ChanCellRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS3DS1ChanCell components. These components can be added and deleted.
ROW lpDS3DS1ChanRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS3DS1Chan components. These components can be added and deleted.
ROW lpDS3DS1ChanTcRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS3DS1ChanTc components. These components can be added and deleted.
ROW lpDS3DS1ChanTestRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS3DS1ChanTest components. These components cannot be added nor deleted.
ROW lpDS3DS1RowStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS3DS1 components. These components can be added and deleted.
ROW lpDS3DS1TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS3DS1Test components. These components cannot be added nor deleted.
ROW lpDS3PlcpRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS3Plcp components. These components cannot be added nor deleted.
ROW lpDS3RowStatus	1.3.6.1.4.1.562.2.4.1.12.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpDS3 components. These components can be added and deleted.
ROW lpDS3TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.5.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpDS3Test components. These components cannot be added nor deleted.
ROW lpE1AudioRowStatus	1.3.6.1.4.1.562.2.4.1.12.8.5.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpE1Audio components. These components cannot be added nor deleted.
ROW lpE1ChanCellRowStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpE1ChanCell components. These components can be added and deleted.
ROW lpE1ChanRowStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpE1Chan components. These components can be added and deleted.
ROW lpE1ChanTcRowStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpE1ChanTc components. These components can be added and deleted.
ROW lpE1ChanTestRowStatus	1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpE1ChanTest components. These components cannot be added nor deleted.
ROW lpE1DspRowStatus	1.3.6.1.4.1.562.2.4.1.12.8.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpE1Dsp components. These components cannot be added nor deleted.
ROW lpE1RowStatus	1.3.6.1.4.1.562.2.4.1.12.8.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpE1 components. These components can be added and deleted.
ROW lpE1TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.8.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpE1Test components. These components cannot be added nor deleted.
ROW lpE3CellRowStatus	1.3.6.1.4.1.562.2.4.1.12.6.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpE3Cell components. These components can be added and deleted.
ROW lpE3G832RowStatus	1.3.6.1.4.1.562.2.4.1.12.6.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpE3G832 components. These components can be added and deleted.
ROW lpE3PlcpRowStatus	1.3.6.1.4.1.562.2.4.1.12.6.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpE3Plcp components. These components cannot be added nor deleted.
ROW lpE3RowStatus	1.3.6.1.4.1.562.2.4.1.12.6.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpE3 components. These components can be added and deleted.
ROW lpE3TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.6.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpE3Test components. These components cannot be added nor deleted.
ROW lpEngDsOvRowStatus	1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpEngDsOv components. These components can be added and deleted.
ROW lpEngDsRowStatus	1.3.6.1.4.1.562.2.4.1.12.23.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpEngDs components. These components can be added and deleted.
ROW lpEngRowStatus	1.3.6.1.4.1.562.2.4.1.12.23.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpEng components. These components cannot be added nor deleted.
ROW lpHssiRowStatus	1.3.6.1.4.1.562.2.4.1.12.17.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpHssi components. These components can be added and deleted.
ROW lpHssiTestRowStatus	1.3.6.1.4.1.562.2.4.1.12.17.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpHssiTest components. These components cannot be added nor deleted.
ROW lpJT2CellRowStatus	1.3.6.1.4.1.562.2.4.1.12.16.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpJT2Cell components. These components cannot be added nor deleted.
ROW lpJT2RowStatus	1.3.6.1.4.1.562.2.4.1.12.16.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpJT2 components. These components can be added and deleted.
ROW lpJT2TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.16.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpJT2Test components. These components cannot be added nor deleted.
ROW lpRowStatus	1.3.6.1.4.1.562.2.4.1.12.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lp components. These components can be added and deleted.
ROW lpSdhPathCellRowStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpSdhPathCell components. These components cannot be added nor deleted.
ROW lpSdhPathRowStatus	1.3.6.1.4.1.562.2.4.1.12.15.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpSdhPath components. These components can be added and deleted.
ROW lpSdhRowStatus	1.3.6.1.4.1.562.2.4.1.12.15.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpSdh components. These components can be added and deleted.
ROW lpSdhTestRowStatus	1.3.6.1.4.1.562.2.4.1.12.15.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpSdhTest components. These components cannot be added nor deleted.
ROW lpSonetPathCellRowStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpSonetPathCell components. These components cannot be added nor deleted.
ROW lpSonetPathRowStatus	1.3.6.1.4.1.562.2.4.1.12.14.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpSonetPath components. These components can be added and deleted.
ROW lpSonetRowStatus	1.3.6.1.4.1.562.2.4.1.12.14.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpSonet components. These components can be added and deleted.
ROW lpSonetTestRowStatus	1.3.6.1.4.1.562.2.4.1.12.14.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpSonetTest components. These components cannot be added nor deleted.
ROW lpV35RowStatus	1.3.6.1.4.1.562.2.4.1.12.9.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpV35 components. These components can be added and deleted.
ROW lpV35TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.9.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpV35Test components. These components cannot be added nor deleted.
ROW lpX21RowStatus	1.3.6.1.4.1.562.2.4.1.12.10.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of lpX21 components. These components can be added and deleted.
ROW lpX21TestRowStatus	1.3.6.1.4.1.562.2.4.1.12.10.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of lpX21Test components. These components cannot be added nor deleted.
StorageType (53)
STO lpDS1AudioStorageType	1.3.6.1.4.1.562.2.4.1.12.7.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1Audio tables.
STO lpDS1ChanCellStorageType	1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1ChanCell tables.
STO lpDS1ChanStorageType	1.3.6.1.4.1.562.2.4.1.12.7.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1Chan tables.
STO lpDS1ChanTcStorageType	1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1ChanTc tables.
STO lpDS1ChanTestStorageType	1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1ChanTest tables.
STO lpDS1DspStorageType	1.3.6.1.4.1.562.2.4.1.12.7.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1Dsp tables.
STO lpDS1StorageType	1.3.6.1.4.1.562.2.4.1.12.7.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1 tables.
STO lpDS1TestStorageType	1.3.6.1.4.1.562.2.4.1.12.7.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS1Test tables.
STO lpDS3CBitStorageType	1.3.6.1.4.1.562.2.4.1.12.5.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3CBit tables.
STO lpDS3CellStorageType	1.3.6.1.4.1.562.2.4.1.12.5.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3Cell tables.
STO lpDS3DS1ChanCellStorageType	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3DS1ChanCell tables.
STO lpDS3DS1ChanStorageType	1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3DS1Chan tables.
STO lpDS3DS1ChanTcStorageType	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3DS1ChanTc tables.
STO lpDS3DS1ChanTestStorageType	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3DS1ChanTest tables.
STO lpDS3DS1StorageType	1.3.6.1.4.1.562.2.4.1.12.5.6.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3DS1 tables.
STO lpDS3DS1TestStorageType	1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3DS1Test tables.
STO lpDS3PlcpStorageType	1.3.6.1.4.1.562.2.4.1.12.5.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3Plcp tables.
STO lpDS3StorageType	1.3.6.1.4.1.562.2.4.1.12.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3 tables.
STO lpDS3TestStorageType	1.3.6.1.4.1.562.2.4.1.12.5.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpDS3Test tables.
STO lpE1AudioStorageType	1.3.6.1.4.1.562.2.4.1.12.8.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1Audio tables.
STO lpE1ChanCellStorageType	1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1ChanCell tables.
STO lpE1ChanStorageType	1.3.6.1.4.1.562.2.4.1.12.8.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1Chan tables.
STO lpE1ChanTcStorageType	1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1ChanTc tables.
STO lpE1ChanTestStorageType	1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1ChanTest tables.
STO lpE1DspStorageType	1.3.6.1.4.1.562.2.4.1.12.8.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1Dsp tables.
STO lpE1StorageType	1.3.6.1.4.1.562.2.4.1.12.8.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1 tables.
STO lpE1TestStorageType	1.3.6.1.4.1.562.2.4.1.12.8.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE1Test tables.
STO lpE3CellStorageType	1.3.6.1.4.1.562.2.4.1.12.6.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE3Cell tables.
STO lpE3G832StorageType	1.3.6.1.4.1.562.2.4.1.12.6.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE3G832 tables.
STO lpE3PlcpStorageType	1.3.6.1.4.1.562.2.4.1.12.6.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE3Plcp tables.
STO lpE3StorageType	1.3.6.1.4.1.562.2.4.1.12.6.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE3 tables.
STO lpE3TestStorageType	1.3.6.1.4.1.562.2.4.1.12.6.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpE3Test tables.
STO lpEngDsOvStorageType	1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpEngDsOv tables.
STO lpEngDsStorageType	1.3.6.1.4.1.562.2.4.1.12.23.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpEngDs tables.
STO lpEngStorageType	1.3.6.1.4.1.562.2.4.1.12.23.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpEng tables.
STO lpHssiStorageType	1.3.6.1.4.1.562.2.4.1.12.17.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpHssi tables.
STO lpHssiTestStorageType	1.3.6.1.4.1.562.2.4.1.12.17.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpHssiTest tables.
STO lpJT2CellStorageType	1.3.6.1.4.1.562.2.4.1.12.16.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpJT2Cell tables.
STO lpJT2StorageType	1.3.6.1.4.1.562.2.4.1.12.16.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpJT2 tables.
STO lpJT2TestStorageType	1.3.6.1.4.1.562.2.4.1.12.16.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpJT2Test tables.
STO lpSdhPathCellStorageType	1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSdhPathCell tables.
STO lpSdhPathStorageType	1.3.6.1.4.1.562.2.4.1.12.15.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSdhPath tables.
STO lpSdhStorageType	1.3.6.1.4.1.562.2.4.1.12.15.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSdh tables.
STO lpSdhTestStorageType	1.3.6.1.4.1.562.2.4.1.12.15.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSdhTest tables.
STO lpSonetPathCellStorageType	1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSonetPathCell tables.
STO lpSonetPathStorageType	1.3.6.1.4.1.562.2.4.1.12.14.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSonetPath tables.
STO lpSonetStorageType	1.3.6.1.4.1.562.2.4.1.12.14.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSonet tables.
STO lpSonetTestStorageType	1.3.6.1.4.1.562.2.4.1.12.14.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpSonetTest tables.
STO lpStorageType	1.3.6.1.4.1.562.2.4.1.12.1.1.4	StorageType	read-only	This variable represents the storage type value for the lp tables.
STO lpV35StorageType	1.3.6.1.4.1.562.2.4.1.12.9.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpV35 tables.
STO lpV35TestStorageType	1.3.6.1.4.1.562.2.4.1.12.9.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpV35Test tables.
STO lpX21StorageType	1.3.6.1.4.1.562.2.4.1.12.10.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpX21 tables.
STO lpX21TestStorageType	1.3.6.1.4.1.562.2.4.1.12.10.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the lpX21Test tables.
Unsigned32 (123)
U32 lpCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.101.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 lpDS1ChanCellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.7.2.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
U32 lpDS1ChanCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.7.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 lpDS1ChanTcSignalOneDuration	1.3.6.1.4.1.562.2.4.1.12.7.2.4.10.1.2	Unsigned32	read-write	This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
U32 lpDS1ChanTcSigOneValue	1.3.6.1.4.1.562.2.4.1.12.7.2.4.398.1.2	Unsigned32	read-write	This variable represents an individual value for the lpDS1ChanTcSigOneTable.
U32 lpDS1ChanTcSigTwoValue	1.3.6.1.4.1.562.2.4.1.12.7.2.4.399.1.2	Unsigned32	read-write	This variable represents an individual value for the lpDS1ChanTcSigTwoTable.
U32 lpDS1ChanTestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpDS1ChanTestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpDS1ChanTestDuration	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 lpDS1ChanTestFrmSize	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 lpDS1ChanTestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 lpDS1CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.7.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 lpDS1LineLength	1.3.6.1.4.1.562.2.4.1.12.7.10.1.5	Unsigned32	read-write	This attribute defines the line length (in feet) for equalization calculations for the DS1 line. The value ranges between 0-655. For 8pDS1Atm cards the actual value used for equalization is rounded up to the nearest 110 feet; for all other card types the actual value used is rounded to the nearest 50 feet.
U32 lpDS1TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpDS1TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpDS1TestDuration	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 lpDS1TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 lpDS1TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 lpDS3CellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.5.5.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
U32 lpDS3CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.5.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 lpDS3DS1ChanCellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
U32 lpDS3DS1ChanCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.5.6.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 lpDS3DS1ChanTcSignalOneDuration	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.10.1.2	Unsigned32	read-write	This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
U32 lpDS3DS1ChanTcSigOneValue	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.398.1.2	Unsigned32	read-write	This variable represents an individual value for the lpDS3DS1ChanTcSigOneTable.
U32 lpDS3DS1ChanTcSigTwoValue	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.399.1.2	Unsigned32	read-write	This variable represents an individual value for the lpDS3DS1ChanTcSigTwoTable.
U32 lpDS3DS1ChanTestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpDS3DS1ChanTestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpDS3DS1ChanTestDuration	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 lpDS3DS1ChanTestFrmSize	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 lpDS3DS1ChanTestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 lpDS3DS1CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.5.6.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 lpDS3DS1TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpDS3DS1TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpDS3DS1TestDuration	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 lpDS3DS1TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 lpDS3DS1TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 lpDS3LineLength	1.3.6.1.4.1.562.2.4.1.12.5.10.1.2	Unsigned32	read-write	This attribute defines the line length for equalization calculations for the DS3 line. The range is between 0 and 450 feet (1 metre = 3.28 feet). Note: There are currently only two ranges as far as the equalization calculation performed on the FP is concerned: 0 to 224ft and 225 to 450ft.
U32 lpDS3TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpDS3TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpDS3TestDuration	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 lpDS3TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 lpDS3TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 lpE1ChanCellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.8.2.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
U32 lpE1ChanCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.8.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 lpE1ChanTcSignalOneDuration	1.3.6.1.4.1.562.2.4.1.12.8.2.4.10.1.2	Unsigned32	read-write	This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
U32 lpE1ChanTcSigOneValue	1.3.6.1.4.1.562.2.4.1.12.8.2.4.398.1.2	Unsigned32	read-write	This variable represents an individual value for the lpE1ChanTcSigOneTable.
U32 lpE1ChanTcSigTwoValue	1.3.6.1.4.1.562.2.4.1.12.8.2.4.399.1.2	Unsigned32	read-write	This variable represents an individual value for the lpE1ChanTcSigTwoTable.
U32 lpE1ChanTestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpE1ChanTestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpE1ChanTestDuration	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 lpE1ChanTestFrmSize	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 lpE1ChanTestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 lpE1CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.8.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 lpE1RaiClearAlarmTime	1.3.6.1.4.1.562.2.4.1.12.8.10.1.6	Unsigned32	read-write	This attribute specifies the period of time that a Remote Alarm Indicator (RAI) has been absent before clearing an RAI alarm. The value of auto sets the RAI clear time to the default value for E1 and E1C card types which do not have hardware support for RAI response. On E1C card types with hardware support, if the value of auto is set, RAI response is done according to the standards. If auto is set, the value of the raiDeclareAlarmTime attribute is ignored and auto is used. This attribute is for E1 and E1C card types only. For all other card types, the default value must be used. VALUES ( 0 = auto )
U32 lpE1RaiDeclareAlarmTime	1.3.6.1.4.1.562.2.4.1.12.8.10.1.5	Unsigned32	read-write	This attribute specifies the period of time that a Remote Alarm Indicator (RAI) must be present before declaring an RAI alarm. The value of auto sets the RAI declare time to the default value for E1 and E1C card types which do not have hardware support for RAI response. On E1C card types with hardware support, if the value of auto is set, RAI response is done according to the standards. If auto is set, the value of the raiClearAlarmTime attribute is ignored and auto is used. This attribute is for E1 and E1C card types only. For all other card types, the default value must be used. VALUES ( 0 = auto )
U32 lpE1TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpE1TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpE1TestDuration	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 lpE1TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 lpE1TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 lpE3CellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.6.5.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
U32 lpE3CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.6.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 lpE3LineLength	1.3.6.1.4.1.562.2.4.1.12.6.10.1.1	Unsigned32	read-write	This attribute defines the line length for equalization calculations for the E3 line. The line length range is between 0 and 300 metres (1 metres = 3.28 feet).
U32 lpE3LinkAlarmActivationThreshold	1.3.6.1.4.1.562.2.4.1.12.6.10.1.6	Unsigned32	read-write	This attribute specifies the time interval between the detection of a sustained link failure and the activation of an alarm. It is provisionable for E3 cards.
U32 lpE3LinkAlarmScanInterval	1.3.6.1.4.1.562.2.4.1.12.6.10.1.7	Unsigned32	read-write	This attribute specifies the alarm scan timer polling interval. It determines how frequently the status of the link is monitored after a first link error interrupt. It is provisionable for E3 cards.
U32 lpE3TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpE3TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpE3TestDuration	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 lpE3TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 lpE3TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 lpEngDsAgentQueueSize	1.3.6.1.4.1.562.2.4.1.12.23.2.10.1.1	Unsigned32	read-only	This attribute indicates the maximum size of the DCS Agent queue size maximum for a DCS data stream on the LP. It is the maximum size to which the Agent's currentQueueSize can grow. When the queue is full and more data is offered to the Agent, it will be discarded. The following are the system defaults (in number of records): - alarm: 100 - accounting: 10000 - debug: 0 - log: 50 - scn: 200 - trap: 50 - stats: 0 To override the system defaults, see Lp Eng Ds Ov's agentQueueSize attribute.
U32 lpEngDsOvAgentQueueSize	1.3.6.1.4.1.562.2.4.1.12.23.2.2.10.1.1	Unsigned32	read-write	This attribute specifies the maximum size of the DCS Agent's queue for this data stream on this LP. For more details on the defaults and other information, refer to the parent component's agentQueueSize attribute. The size should be set to 0 if absolutely no data is to be accepted from applications. There are threshold alarms based on the value of the Agent's currentQueueSize attribute (a Set when the queue becomes 75% full and a Clear after dropping back to 50% full). To properly determine what to set this to, consult the 'Magellan Passport Engineering Notes and Guidelines'.
U32 lpHssiCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.17.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 lpHssiLineSpeed	1.3.6.1.4.1.562.2.4.1.12.17.10.1.5	Unsigned32	read-write	This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. Note that the actual clock rate are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed.
U32 lpHssiTestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpHssiTestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpHssiTestDuration	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 lpHssiTestFrmSize	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 lpHssiTestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 lpJT2CellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.16.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
U32 lpJT2CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.16.10.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 lpJT2LineLength	1.3.6.1.4.1.562.2.4.1.12.16.11.1.2	Unsigned32	read-write	This attribute defines the line length for equalization calculations for the JT2 line. The range is between 0 and 480 feet (1 metre = 3.28 feet).
U32 lpJT2TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpJT2TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpJT2TestDuration	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 lpJT2TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 lpJT2TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 lpLocalMsgBlockCapacity	1.3.6.1.4.1.562.2.4.1.12.105.1.2	Unsigned32	read-only	This attribute indicates the processor card's local message block memory capacity (in kilobytes). These message blocks are used for local messaging on the card.
U32 lpMemoryCapacityValue	1.3.6.1.4.1.562.2.4.1.12.244.1.2	Unsigned32	read-only	This variable represents an individual value for the lpMemoryCapacityTable.
U32 lpMsgBlockCapacity	1.3.6.1.4.1.562.2.4.1.12.105.1.1	Unsigned32	read-only	This attribute indicates the processor card's shared message block memory capacity (in kilobytes).
U32 lpSdhCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.15.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 lpSdhPathCellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.15.2.2.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
U32 lpSdhPathCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.15.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 lpSdhTestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpSdhTestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpSdhTestDuration	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 lpSdhTestFrmSize	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 lpSdhTestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 lpSonetCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.14.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 lpSonetPathCellAlarmActDelay	1.3.6.1.4.1.562.2.4.1.12.14.2.2.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
U32 lpSonetPathCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.14.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 lpSonetTestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpSonetTestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpSonetTestDuration	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 lpSonetTestFrmSize	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 lpSonetTestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 lpTimeInterval	1.3.6.1.4.1.562.2.4.1.12.104.1.1	Unsigned32	read-only	This attribute indicates the time period (in minutes) for which the average, minimum and maximum utilization values are calculated. This attribute is reset to 0 every 15 minutes.
U32 lpV35CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.9.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 lpV35LineSpeed	1.3.6.1.4.1.562.2.4.1.12.9.10.1.5	Unsigned32	read-write	This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. The clock rate is rounded up to the nearest available value. Note that the actual clock rates are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed. The actual lineSpeeds configurable on a V.35 DCE interface are: 3840000, 2560000, 2048000, 1920000, 1536000, 1344000, 1280000, 1024000, 960000, 768000, 672000, 640000, 512000, 448000, 384000, 336000, 320000, 256000, 224000, 192000, 168000, 128000, 112000, 64000, 56000, 48000, 32000, 19200, 9600. Note that linspeeds of 1024000 and 2048000 cannot be provisioned on cards that have ports provisioned at 3840000, 2560000, 1920000, 1280000, 960000, 640000 or 320000.
U32 lpV35LineStatusTimeOut	1.3.6.1.4.1.562.2.4.1.12.9.10.1.4	Unsigned32	read-write	This attribute defines the time that the line state must be stable (good or bad) before a line state change is declared.
U32 lpV35TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpV35TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpV35TestDuration	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 lpV35TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 lpV35TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 lpX21CustomerIdentifier	1.3.6.1.4.1.562.2.4.1.12.10.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 lpX21LineSpeed	1.3.6.1.4.1.562.2.4.1.12.10.10.1.5	Unsigned32	read-write	This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. The clock rate is rounded up to the nearest available value. Note that the actual clock rates are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed. The actual lineSpeeds configurable on a V.11 DCE interface are: 7680000, 3840000, 2560000, 2048000, 1920000, 1536000, 1344000, 1280000, 1024000, 960000, 768000, 672000, 640000, 512000, 448000, 384000, 336000, 320000, 256000, 224000, 192000, 168000, 128000, 112000, 64000, 56000, 48000, 32000, 19200, 9600. Note that linspeeds of 1024000 and 2048000 cannot be provisioned on cards that have ports provisioned at 3840000, 2560000, 1920000, 1280000, 960000, 640000 or 320000. DESCRIPTION
U32 lpX21LineStatusTimeOut	1.3.6.1.4.1.562.2.4.1.12.10.10.1.4	Unsigned32	read-write	This attribute defines the time the line state must be stable (good or bad) before a state change is declared.
U32 lpX21TestDataStartDelay	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 lpX21TestDisplayInterval	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 lpX21TestDuration	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 lpX21TestFrmSize	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 lpX21TestTimeRemaining	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
No type (612)
logicalProcessorCapabilities	1.3.6.1.4.1.562.2.4.2.11.3
logicalProcessorCapabilitiesBE	1.3.6.1.4.1.562.2.4.2.11.3.5
logicalProcessorCapabilitiesBE01	1.3.6.1.4.1.562.2.4.2.11.3.5.2
logicalProcessorCapabilitiesBE01A	1.3.6.1.4.1.562.2.4.2.11.3.5.2.2
logicalProcessorGroup	1.3.6.1.4.1.562.2.4.2.11.1
logicalProcessorGroupBE	1.3.6.1.4.1.562.2.4.2.11.1.5
logicalProcessorGroupBE01	1.3.6.1.4.1.562.2.4.2.11.1.5.2
logicalProcessorGroupBE01A	1.3.6.1.4.1.562.2.4.2.11.1.5.2.2
logicalProcessorMIB	1.3.6.1.4.1.562.2.4.2.11
lp	1.3.6.1.4.1.562.2.4.1.12
lpCapEntry	1.3.6.1.4.1.562.2.4.1.12.105.1		not-accessible	An entry in the lpCapTable.
lpCapTable	1.3.6.1.4.1.562.2.4.1.12.105		not-accessible	This group contains the operational attributes that specify the processor's capacity levels. When this group exists for an LP component, the attributes are representative of the active Card.
lpCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.101.1		not-accessible	An entry in the lpCidDataTable.
lpCidDataTable	1.3.6.1.4.1.562.2.4.1.12.101		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpDS1	1.3.6.1.4.1.562.2.4.1.12.7
lpDS1AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.7.12.1		not-accessible	An entry in the lpDS1AdminInfoTable.
lpDS1AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.7.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpDS1Audio	1.3.6.1.4.1.562.2.4.1.12.7.5
lpDS1AudioRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.5.1.1		not-accessible	A single entry in the table represents a single lpDS1Audio component.
lpDS1AudioRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.5.1		not-accessible	This entry controls the addition and deletion of lpDS1Audio components.
lpDS1Chan	1.3.6.1.4.1.562.2.4.1.12.7.2
lpDS1ChanAdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.16.1		not-accessible	An entry in the lpDS1ChanAdminInfoTable.
lpDS1ChanAdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.7.2.16		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpDS1ChanCell	1.3.6.1.4.1.562.2.4.1.12.7.2.3
lpDS1ChanCellOperEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.3.11.1		not-accessible	An entry in the lpDS1ChanCellOperTable.
lpDS1ChanCellOperTable	1.3.6.1.4.1.562.2.4.1.12.7.2.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpDS1ChanCellProvEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.3.10.1		not-accessible	An entry in the lpDS1ChanCellProvTable.
lpDS1ChanCellProvTable	1.3.6.1.4.1.562.2.4.1.12.7.2.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
lpDS1ChanCellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1		not-accessible	A single entry in the table represents a single lpDS1ChanCell component.
lpDS1ChanCellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.2.3.1		not-accessible	This entry controls the addition and deletion of lpDS1ChanCell components.
lpDS1ChanCellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1		not-accessible	An entry in the lpDS1ChanCellStatsTable.
lpDS1ChanCellStatsTable	1.3.6.1.4.1.562.2.4.1.12.7.2.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpDS1ChanCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.11.1		not-accessible	An entry in the lpDS1ChanCidDataTable.
lpDS1ChanCidDataTable	1.3.6.1.4.1.562.2.4.1.12.7.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpDS1ChanIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.12.1		not-accessible	An entry in the lpDS1ChanIfEntryTable.
lpDS1ChanIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.7.2.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpDS1ChanOperEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.15.1		not-accessible	An entry in the lpDS1ChanOperTable.
lpDS1ChanOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.13.1		not-accessible	An entry in the lpDS1ChanOperStatusTable.
lpDS1ChanOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.2.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpDS1ChanOperTable	1.3.6.1.4.1.562.2.4.1.12.7.2.15		not-accessible	This group contains all of the operational data for a Channel component.
lpDS1ChanProvEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.10.1		not-accessible	An entry in the lpDS1ChanProvTable.
lpDS1ChanProvTable	1.3.6.1.4.1.562.2.4.1.12.7.2.10		not-accessible	This group contains all of the provisional data for a Channel component.
lpDS1ChanRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.1.1		not-accessible	A single entry in the table represents a single lpDS1Chan component.
lpDS1ChanRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.2.1		not-accessible	This entry controls the addition and deletion of lpDS1Chan components.
lpDS1ChanStateEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.14.1		not-accessible	An entry in the lpDS1ChanStateTable.
lpDS1ChanStateTable	1.3.6.1.4.1.562.2.4.1.12.7.2.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpDS1ChanTc	1.3.6.1.4.1.562.2.4.1.12.7.2.4
lpDS1ChanTcOpEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.4.11.1		not-accessible	An entry in the lpDS1ChanTcOpTable.
lpDS1ChanTcOpTable	1.3.6.1.4.1.562.2.4.1.12.7.2.4.11		not-accessible	This group contains all specific operational data for a Tc component.
lpDS1ChanTcProvEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.4.10.1		not-accessible	An entry in the lpDS1ChanTcProvTable.
lpDS1ChanTcProvTable	1.3.6.1.4.1.562.2.4.1.12.7.2.4.10		not-accessible	This group contains all specific provisioning data for a Tc component.
lpDS1ChanTcRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1		not-accessible	A single entry in the table represents a single lpDS1ChanTc component.
lpDS1ChanTcRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.2.4.1		not-accessible	This entry controls the addition and deletion of lpDS1ChanTc components.
lpDS1ChanTcSigOneEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.4.398.1		not-accessible	An entry in the lpDS1ChanTcSigOneTable.
lpDS1ChanTcSigOneTable	1.3.6.1.4.1.562.2.4.1.12.7.2.4.398		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
lpDS1ChanTcSigTwoEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.4.399.1		not-accessible	An entry in the lpDS1ChanTcSigTwoTable.
lpDS1ChanTcSigTwoTable	1.3.6.1.4.1.562.2.4.1.12.7.2.4.399		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
lpDS1ChanTest	1.3.6.1.4.1.562.2.4.1.12.7.2.2
lpDS1ChanTestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1		not-accessible	An entry in the lpDS1ChanTestResultsTable.
lpDS1ChanTestResultsTable	1.3.6.1.4.1.562.2.4.1.12.7.2.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpDS1ChanTestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1		not-accessible	A single entry in the table represents a single lpDS1ChanTest component.
lpDS1ChanTestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.2.2.1		not-accessible	This entry controls the addition and deletion of lpDS1ChanTest components.
lpDS1ChanTestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1		not-accessible	An entry in the lpDS1ChanTestSetupTable.
lpDS1ChanTestSetupTable	1.3.6.1.4.1.562.2.4.1.12.7.2.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpDS1ChanTestStateEntry	1.3.6.1.4.1.562.2.4.1.12.7.2.2.10.1		not-accessible	An entry in the lpDS1ChanTestStateTable.
lpDS1ChanTestStateTable	1.3.6.1.4.1.562.2.4.1.12.7.2.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpDS1CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.7.11.1		not-accessible	An entry in the lpDS1CidDataTable.
lpDS1CidDataTable	1.3.6.1.4.1.562.2.4.1.12.7.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpDS1Dsp	1.3.6.1.4.1.562.2.4.1.12.7.4
lpDS1DspRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.4.1.1		not-accessible	A single entry in the table represents a single lpDS1Dsp component.
lpDS1DspRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.4.1		not-accessible	This entry controls the addition and deletion of lpDS1Dsp components.
lpDS1IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.7.13.1		not-accessible	An entry in the lpDS1IfEntryTable.
lpDS1IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.7.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpDS1OperEntry	1.3.6.1.4.1.562.2.4.1.12.7.16.1		not-accessible	An entry in the lpDS1OperTable.
lpDS1OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.14.1		not-accessible	An entry in the lpDS1OperStatusTable.
lpDS1OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpDS1OperTable	1.3.6.1.4.1.562.2.4.1.12.7.16		not-accessible	This group contains the common operational data for a component in a digital hierarchy interface.
lpDS1ProvEntry	1.3.6.1.4.1.562.2.4.1.12.7.10.1		not-accessible	An entry in the lpDS1ProvTable.
lpDS1ProvTable	1.3.6.1.4.1.562.2.4.1.12.7.10		not-accessible	This group contains all of the provisioning data for a DS1 component.
lpDS1RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.1.1		not-accessible	A single entry in the table represents a single lpDS1 component.
lpDS1RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.1		not-accessible	This entry controls the addition and deletion of lpDS1 components.
lpDS1StateEntry	1.3.6.1.4.1.562.2.4.1.12.7.15.1		not-accessible	An entry in the lpDS1StateTable.
lpDS1StateTable	1.3.6.1.4.1.562.2.4.1.12.7.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpDS1StatsEntry	1.3.6.1.4.1.562.2.4.1.12.7.17.1		not-accessible	An entry in the lpDS1StatsTable.
lpDS1StatsTable	1.3.6.1.4.1.562.2.4.1.12.7.17		not-accessible	This group contains the common statistical data for a component in a digital hierarchy interface.
lpDS1Test	1.3.6.1.4.1.562.2.4.1.12.7.3
lpDS1TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.7.3.12.1		not-accessible	An entry in the lpDS1TestResultsTable.
lpDS1TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.7.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpDS1TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.7.3.1.1		not-accessible	A single entry in the table represents a single lpDS1Test component.
lpDS1TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.7.3.1		not-accessible	This entry controls the addition and deletion of lpDS1Test components.
lpDS1TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.7.3.11.1		not-accessible	An entry in the lpDS1TestSetupTable.
lpDS1TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.7.3.11		not-accessible	This group contains all of the operational data for a Test component.
lpDS1TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.7.3.10.1		not-accessible	An entry in the lpDS1TestStateTable.
lpDS1TestStateTable	1.3.6.1.4.1.562.2.4.1.12.7.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpDS3	1.3.6.1.4.1.562.2.4.1.12.5
lpDS3AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.5.12.1		not-accessible	An entry in the lpDS3AdminInfoTable.
lpDS3AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.5.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpDS3CBit	1.3.6.1.4.1.562.2.4.1.12.5.3
lpDS3CBitOperationalEntry	1.3.6.1.4.1.562.2.4.1.12.5.3.10.1		not-accessible	An entry in the lpDS3CBitOperationalTable.
lpDS3CBitOperationalTable	1.3.6.1.4.1.562.2.4.1.12.5.3.10		not-accessible	This group contains the DS3 C-Bit Parity operational data for the CBIT component.
lpDS3CBitRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.3.1.1		not-accessible	A single entry in the table represents a single lpDS3CBit component.
lpDS3CBitRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.3.1		not-accessible	This entry controls the addition and deletion of lpDS3CBit components.
lpDS3CBitStatsEntry	1.3.6.1.4.1.562.2.4.1.12.5.3.11.1		not-accessible	An entry in the lpDS3CBitStatsTable.
lpDS3CBitStatsTable	1.3.6.1.4.1.562.2.4.1.12.5.3.11		not-accessible	This group contains the DS3 C-Bit Parity statistical data for the CBIT component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpDS3Cell	1.3.6.1.4.1.562.2.4.1.12.5.5
lpDS3CellOperEntry	1.3.6.1.4.1.562.2.4.1.12.5.5.11.1		not-accessible	An entry in the lpDS3CellOperTable.
lpDS3CellOperTable	1.3.6.1.4.1.562.2.4.1.12.5.5.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpDS3CellProvEntry	1.3.6.1.4.1.562.2.4.1.12.5.5.10.1		not-accessible	An entry in the lpDS3CellProvTable.
lpDS3CellProvTable	1.3.6.1.4.1.562.2.4.1.12.5.5.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
lpDS3CellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.5.1.1		not-accessible	A single entry in the table represents a single lpDS3Cell component.
lpDS3CellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.5.1		not-accessible	This entry controls the addition and deletion of lpDS3Cell components.
lpDS3CellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.5.5.12.1		not-accessible	An entry in the lpDS3CellStatsTable.
lpDS3CellStatsTable	1.3.6.1.4.1.562.2.4.1.12.5.5.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpDS3CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.5.11.1		not-accessible	An entry in the lpDS3CidDataTable.
lpDS3CidDataTable	1.3.6.1.4.1.562.2.4.1.12.5.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpDS3DS1	1.3.6.1.4.1.562.2.4.1.12.5.6
lpDS3DS1AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.12.1		not-accessible	An entry in the lpDS3DS1AdminInfoTable.
lpDS3DS1AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.5.6.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpDS3DS1Chan	1.3.6.1.4.1.562.2.4.1.12.5.6.2
lpDS3DS1ChanAdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.16.1		not-accessible	An entry in the lpDS3DS1ChanAdminInfoTable.
lpDS3DS1ChanAdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.16		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpDS3DS1ChanCell	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3
lpDS3DS1ChanCellOperEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.11.1		not-accessible	An entry in the lpDS3DS1ChanCellOperTable.
lpDS3DS1ChanCellOperTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpDS3DS1ChanCellProvEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10.1		not-accessible	An entry in the lpDS3DS1ChanCellProvTable.
lpDS3DS1ChanCellProvTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
lpDS3DS1ChanCellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1		not-accessible	A single entry in the table represents a single lpDS3DS1ChanCell component.
lpDS3DS1ChanCellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1		not-accessible	This entry controls the addition and deletion of lpDS3DS1ChanCell components.
lpDS3DS1ChanCellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1		not-accessible	An entry in the lpDS3DS1ChanCellStatsTable.
lpDS3DS1ChanCellStatsTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpDS3DS1ChanCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.11.1		not-accessible	An entry in the lpDS3DS1ChanCidDataTable.
lpDS3DS1ChanCidDataTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpDS3DS1ChanIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.12.1		not-accessible	An entry in the lpDS3DS1ChanIfEntryTable.
lpDS3DS1ChanIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpDS3DS1ChanOperEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.15.1		not-accessible	An entry in the lpDS3DS1ChanOperTable.
lpDS3DS1ChanOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.13.1		not-accessible	An entry in the lpDS3DS1ChanOperStatusTable.
lpDS3DS1ChanOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpDS3DS1ChanOperTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.15		not-accessible	This group contains all of the operational data for a Channel component.
lpDS3DS1ChanProvEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.10.1		not-accessible	An entry in the lpDS3DS1ChanProvTable.
lpDS3DS1ChanProvTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.10		not-accessible	This group contains all of the provisional data for a Channel component.
lpDS3DS1ChanRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1		not-accessible	A single entry in the table represents a single lpDS3DS1Chan component.
lpDS3DS1ChanRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.1		not-accessible	This entry controls the addition and deletion of lpDS3DS1Chan components.
lpDS3DS1ChanStateEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1		not-accessible	An entry in the lpDS3DS1ChanStateTable.
lpDS3DS1ChanStateTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpDS3DS1ChanTc	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4
lpDS3DS1ChanTcOpEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.11.1		not-accessible	An entry in the lpDS3DS1ChanTcOpTable.
lpDS3DS1ChanTcOpTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.11		not-accessible	This group contains all specific operational data for a Tc component.
lpDS3DS1ChanTcProvEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.10.1		not-accessible	An entry in the lpDS3DS1ChanTcProvTable.
lpDS3DS1ChanTcProvTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.10		not-accessible	This group contains all specific provisioning data for a Tc component.
lpDS3DS1ChanTcRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1		not-accessible	A single entry in the table represents a single lpDS3DS1ChanTc component.
lpDS3DS1ChanTcRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1		not-accessible	This entry controls the addition and deletion of lpDS3DS1ChanTc components.
lpDS3DS1ChanTcSigOneEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.398.1		not-accessible	An entry in the lpDS3DS1ChanTcSigOneTable.
lpDS3DS1ChanTcSigOneTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.398		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
lpDS3DS1ChanTcSigTwoEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.399.1		not-accessible	An entry in the lpDS3DS1ChanTcSigTwoTable.
lpDS3DS1ChanTcSigTwoTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.399		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
lpDS3DS1ChanTest	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2
lpDS3DS1ChanTestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1		not-accessible	An entry in the lpDS3DS1ChanTestResultsTable.
lpDS3DS1ChanTestResultsTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpDS3DS1ChanTestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1		not-accessible	A single entry in the table represents a single lpDS3DS1ChanTest component.
lpDS3DS1ChanTestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1		not-accessible	This entry controls the addition and deletion of lpDS3DS1ChanTest components.
lpDS3DS1ChanTestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1		not-accessible	An entry in the lpDS3DS1ChanTestSetupTable.
lpDS3DS1ChanTestSetupTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpDS3DS1ChanTestStateEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10.1		not-accessible	An entry in the lpDS3DS1ChanTestStateTable.
lpDS3DS1ChanTestStateTable	1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpDS3DS1CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.11.1		not-accessible	An entry in the lpDS3DS1CidDataTable.
lpDS3DS1CidDataTable	1.3.6.1.4.1.562.2.4.1.12.5.6.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpDS3DS1IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.13.1		not-accessible	An entry in the lpDS3DS1IfEntryTable.
lpDS3DS1IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.5.6.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpDS3DS1OperEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.16.1		not-accessible	An entry in the lpDS3DS1OperTable.
lpDS3DS1OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.14.1		not-accessible	An entry in the lpDS3DS1OperStatusTable.
lpDS3DS1OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpDS3DS1OperTable	1.3.6.1.4.1.562.2.4.1.12.5.6.16		not-accessible	This group contains the common operational data for a component in a digital hierarchy interface.
lpDS3DS1ProvEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.10.1		not-accessible	An entry in the lpDS3DS1ProvTable.
lpDS3DS1ProvTable	1.3.6.1.4.1.562.2.4.1.12.5.6.10		not-accessible	This group contains all of the provisioning data for a DS1 component.
lpDS3DS1RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.1.1		not-accessible	A single entry in the table represents a single lpDS3DS1 component.
lpDS3DS1RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.1		not-accessible	This entry controls the addition and deletion of lpDS3DS1 components.
lpDS3DS1StateEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.15.1		not-accessible	An entry in the lpDS3DS1StateTable.
lpDS3DS1StateTable	1.3.6.1.4.1.562.2.4.1.12.5.6.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpDS3DS1StatsEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.17.1		not-accessible	An entry in the lpDS3DS1StatsTable.
lpDS3DS1StatsTable	1.3.6.1.4.1.562.2.4.1.12.5.6.17		not-accessible	This group contains the common statistical data for a component in a digital hierarchy interface.
lpDS3DS1Test	1.3.6.1.4.1.562.2.4.1.12.5.6.3
lpDS3DS1TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1		not-accessible	An entry in the lpDS3DS1TestResultsTable.
lpDS3DS1TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.5.6.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpDS3DS1TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1		not-accessible	A single entry in the table represents a single lpDS3DS1Test component.
lpDS3DS1TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.6.3.1		not-accessible	This entry controls the addition and deletion of lpDS3DS1Test components.
lpDS3DS1TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1		not-accessible	An entry in the lpDS3DS1TestSetupTable.
lpDS3DS1TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.5.6.3.11		not-accessible	This group contains all of the operational data for a Test component.
lpDS3DS1TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.5.6.3.10.1		not-accessible	An entry in the lpDS3DS1TestStateTable.
lpDS3DS1TestStateTable	1.3.6.1.4.1.562.2.4.1.12.5.6.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpDS3IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.5.13.1		not-accessible	An entry in the lpDS3IfEntryTable.
lpDS3IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.5.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpDS3OperEntry	1.3.6.1.4.1.562.2.4.1.12.5.16.1		not-accessible	An entry in the lpDS3OperTable.
lpDS3OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.14.1		not-accessible	An entry in the lpDS3OperStatusTable.
lpDS3OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpDS3OperTable	1.3.6.1.4.1.562.2.4.1.12.5.16		not-accessible	This group contains the common operational data for DS3 component.
lpDS3Plcp	1.3.6.1.4.1.562.2.4.1.12.5.4
lpDS3PlcpOperationalEntry	1.3.6.1.4.1.562.2.4.1.12.5.4.10.1		not-accessible	An entry in the lpDS3PlcpOperationalTable.
lpDS3PlcpOperationalTable	1.3.6.1.4.1.562.2.4.1.12.5.4.10		not-accessible	This group contains the operational data for the PLCP component.
lpDS3PlcpRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.4.1.1		not-accessible	A single entry in the table represents a single lpDS3Plcp component.
lpDS3PlcpRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.4.1		not-accessible	This entry controls the addition and deletion of lpDS3Plcp components.
lpDS3PlcpStatsEntry	1.3.6.1.4.1.562.2.4.1.12.5.4.11.1		not-accessible	An entry in the lpDS3PlcpStatsTable.
lpDS3PlcpStatsTable	1.3.6.1.4.1.562.2.4.1.12.5.4.11		not-accessible	This group contains the statistical data for the PLCP component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpDS3ProvEntry	1.3.6.1.4.1.562.2.4.1.12.5.10.1		not-accessible	An entry in the lpDS3ProvTable.
lpDS3ProvTable	1.3.6.1.4.1.562.2.4.1.12.5.10		not-accessible	This group contains all of the provisioning data for a DS3 component.
lpDS3RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.1.1		not-accessible	A single entry in the table represents a single lpDS3 component.
lpDS3RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.1		not-accessible	This entry controls the addition and deletion of lpDS3 components.
lpDS3StateEntry	1.3.6.1.4.1.562.2.4.1.12.5.15.1		not-accessible	An entry in the lpDS3StateTable.
lpDS3StateTable	1.3.6.1.4.1.562.2.4.1.12.5.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpDS3StatsEntry	1.3.6.1.4.1.562.2.4.1.12.5.17.1		not-accessible	An entry in the lpDS3StatsTable.
lpDS3StatsTable	1.3.6.1.4.1.562.2.4.1.12.5.17		not-accessible	This group contains the specific DS3 common operational data for a DS3 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpDS3Test	1.3.6.1.4.1.562.2.4.1.12.5.2
lpDS3TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.5.2.12.1		not-accessible	An entry in the lpDS3TestResultsTable.
lpDS3TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.5.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpDS3TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.5.2.1.1		not-accessible	A single entry in the table represents a single lpDS3Test component.
lpDS3TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.5.2.1		not-accessible	This entry controls the addition and deletion of lpDS3Test components.
lpDS3TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.5.2.11.1		not-accessible	An entry in the lpDS3TestSetupTable.
lpDS3TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.5.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpDS3TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.5.2.10.1		not-accessible	An entry in the lpDS3TestStateTable.
lpDS3TestStateTable	1.3.6.1.4.1.562.2.4.1.12.5.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpE1	1.3.6.1.4.1.562.2.4.1.12.8
lpE1AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.8.12.1		not-accessible	An entry in the lpE1AdminInfoTable.
lpE1AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.8.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpE1Audio	1.3.6.1.4.1.562.2.4.1.12.8.5
lpE1AudioRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.5.1.1		not-accessible	A single entry in the table represents a single lpE1Audio component.
lpE1AudioRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.5.1		not-accessible	This entry controls the addition and deletion of lpE1Audio components.
lpE1Chan	1.3.6.1.4.1.562.2.4.1.12.8.2
lpE1ChanAdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.16.1		not-accessible	An entry in the lpE1ChanAdminInfoTable.
lpE1ChanAdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.8.2.16		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpE1ChanCell	1.3.6.1.4.1.562.2.4.1.12.8.2.3
lpE1ChanCellOperEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.3.11.1		not-accessible	An entry in the lpE1ChanCellOperTable.
lpE1ChanCellOperTable	1.3.6.1.4.1.562.2.4.1.12.8.2.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpE1ChanCellProvEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.3.10.1		not-accessible	An entry in the lpE1ChanCellProvTable.
lpE1ChanCellProvTable	1.3.6.1.4.1.562.2.4.1.12.8.2.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
lpE1ChanCellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1		not-accessible	A single entry in the table represents a single lpE1ChanCell component.
lpE1ChanCellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.2.3.1		not-accessible	This entry controls the addition and deletion of lpE1ChanCell components.
lpE1ChanCellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1		not-accessible	An entry in the lpE1ChanCellStatsTable.
lpE1ChanCellStatsTable	1.3.6.1.4.1.562.2.4.1.12.8.2.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpE1ChanCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.11.1		not-accessible	An entry in the lpE1ChanCidDataTable.
lpE1ChanCidDataTable	1.3.6.1.4.1.562.2.4.1.12.8.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpE1ChanIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.12.1		not-accessible	An entry in the lpE1ChanIfEntryTable.
lpE1ChanIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.8.2.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpE1ChanOperEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.15.1		not-accessible	An entry in the lpE1ChanOperTable.
lpE1ChanOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.13.1		not-accessible	An entry in the lpE1ChanOperStatusTable.
lpE1ChanOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.2.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpE1ChanOperTable	1.3.6.1.4.1.562.2.4.1.12.8.2.15		not-accessible	This group contains all of the operational data for a Channel component.
lpE1ChanProvEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.10.1		not-accessible	An entry in the lpE1ChanProvTable.
lpE1ChanProvTable	1.3.6.1.4.1.562.2.4.1.12.8.2.10		not-accessible	This group contains all of the provisional data for a Channel component.
lpE1ChanRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.1.1		not-accessible	A single entry in the table represents a single lpE1Chan component.
lpE1ChanRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.2.1		not-accessible	This entry controls the addition and deletion of lpE1Chan components.
lpE1ChanStateEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.14.1		not-accessible	An entry in the lpE1ChanStateTable.
lpE1ChanStateTable	1.3.6.1.4.1.562.2.4.1.12.8.2.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpE1ChanTc	1.3.6.1.4.1.562.2.4.1.12.8.2.4
lpE1ChanTcOpEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.4.11.1		not-accessible	An entry in the lpE1ChanTcOpTable.
lpE1ChanTcOpTable	1.3.6.1.4.1.562.2.4.1.12.8.2.4.11		not-accessible	This group contains all specific operational data for a Tc component.
lpE1ChanTcProvEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.4.10.1		not-accessible	An entry in the lpE1ChanTcProvTable.
lpE1ChanTcProvTable	1.3.6.1.4.1.562.2.4.1.12.8.2.4.10		not-accessible	This group contains all specific provisioning data for a Tc component.
lpE1ChanTcRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1		not-accessible	A single entry in the table represents a single lpE1ChanTc component.
lpE1ChanTcRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.2.4.1		not-accessible	This entry controls the addition and deletion of lpE1ChanTc components.
lpE1ChanTcSigOneEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.4.398.1		not-accessible	An entry in the lpE1ChanTcSigOneTable.
lpE1ChanTcSigOneTable	1.3.6.1.4.1.562.2.4.1.12.8.2.4.398		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
lpE1ChanTcSigTwoEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.4.399.1		not-accessible	An entry in the lpE1ChanTcSigTwoTable.
lpE1ChanTcSigTwoTable	1.3.6.1.4.1.562.2.4.1.12.8.2.4.399		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
lpE1ChanTest	1.3.6.1.4.1.562.2.4.1.12.8.2.2
lpE1ChanTestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1		not-accessible	An entry in the lpE1ChanTestResultsTable.
lpE1ChanTestResultsTable	1.3.6.1.4.1.562.2.4.1.12.8.2.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpE1ChanTestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1		not-accessible	A single entry in the table represents a single lpE1ChanTest component.
lpE1ChanTestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.2.2.1		not-accessible	This entry controls the addition and deletion of lpE1ChanTest components.
lpE1ChanTestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1		not-accessible	An entry in the lpE1ChanTestSetupTable.
lpE1ChanTestSetupTable	1.3.6.1.4.1.562.2.4.1.12.8.2.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpE1ChanTestStateEntry	1.3.6.1.4.1.562.2.4.1.12.8.2.2.10.1		not-accessible	An entry in the lpE1ChanTestStateTable.
lpE1ChanTestStateTable	1.3.6.1.4.1.562.2.4.1.12.8.2.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpE1CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.8.11.1		not-accessible	An entry in the lpE1CidDataTable.
lpE1CidDataTable	1.3.6.1.4.1.562.2.4.1.12.8.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpE1Dsp	1.3.6.1.4.1.562.2.4.1.12.8.4
lpE1DspRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.4.1.1		not-accessible	A single entry in the table represents a single lpE1Dsp component.
lpE1DspRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.4.1		not-accessible	This entry controls the addition and deletion of lpE1Dsp components.
lpE1E1OperEntry	1.3.6.1.4.1.562.2.4.1.12.8.17.1		not-accessible	An entry in the lpE1E1OperTable.
lpE1E1OperTable	1.3.6.1.4.1.562.2.4.1.12.8.17		not-accessible	This group contains all of the operational data for a E1 component that are not defined in the DSCommonOp group.
lpE1IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.8.13.1		not-accessible	An entry in the lpE1IfEntryTable.
lpE1IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.8.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpE1OperEntry	1.3.6.1.4.1.562.2.4.1.12.8.16.1		not-accessible	An entry in the lpE1OperTable.
lpE1OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.14.1		not-accessible	An entry in the lpE1OperStatusTable.
lpE1OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpE1OperTable	1.3.6.1.4.1.562.2.4.1.12.8.16		not-accessible	This group contains the common operational data for a component in a digital hierarchy interface.
lpE1ProvEntry	1.3.6.1.4.1.562.2.4.1.12.8.10.1		not-accessible	An entry in the lpE1ProvTable.
lpE1ProvTable	1.3.6.1.4.1.562.2.4.1.12.8.10		not-accessible	This group contains all of the provisioning data for an E1 component.
lpE1RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.1.1		not-accessible	A single entry in the table represents a single lpE1 component.
lpE1RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.1		not-accessible	This entry controls the addition and deletion of lpE1 components.
lpE1StateEntry	1.3.6.1.4.1.562.2.4.1.12.8.15.1		not-accessible	An entry in the lpE1StateTable.
lpE1StateTable	1.3.6.1.4.1.562.2.4.1.12.8.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpE1StatsEntry	1.3.6.1.4.1.562.2.4.1.12.8.18.1		not-accessible	An entry in the lpE1StatsTable.
lpE1StatsTable	1.3.6.1.4.1.562.2.4.1.12.8.18		not-accessible	This group contains the common statistical data for a component in a digital hierarchy interface.
lpE1Test	1.3.6.1.4.1.562.2.4.1.12.8.3
lpE1TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.8.3.12.1		not-accessible	An entry in the lpE1TestResultsTable.
lpE1TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.8.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpE1TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.8.3.1.1		not-accessible	A single entry in the table represents a single lpE1Test component.
lpE1TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.8.3.1		not-accessible	This entry controls the addition and deletion of lpE1Test components.
lpE1TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.8.3.11.1		not-accessible	An entry in the lpE1TestSetupTable.
lpE1TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.8.3.11		not-accessible	This group contains all of the operational data for a Test component.
lpE1TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.8.3.10.1		not-accessible	An entry in the lpE1TestStateTable.
lpE1TestStateTable	1.3.6.1.4.1.562.2.4.1.12.8.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpE3	1.3.6.1.4.1.562.2.4.1.12.6
lpE3AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.6.12.1		not-accessible	An entry in the lpE3AdminInfoTable.
lpE3AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.6.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpE3Cell	1.3.6.1.4.1.562.2.4.1.12.6.5
lpE3CellOperEntry	1.3.6.1.4.1.562.2.4.1.12.6.5.11.1		not-accessible	An entry in the lpE3CellOperTable.
lpE3CellOperTable	1.3.6.1.4.1.562.2.4.1.12.6.5.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpE3CellProvEntry	1.3.6.1.4.1.562.2.4.1.12.6.5.10.1		not-accessible	An entry in the lpE3CellProvTable.
lpE3CellProvTable	1.3.6.1.4.1.562.2.4.1.12.6.5.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
lpE3CellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.6.5.1.1		not-accessible	A single entry in the table represents a single lpE3Cell component.
lpE3CellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.6.5.1		not-accessible	This entry controls the addition and deletion of lpE3Cell components.
lpE3CellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.6.5.12.1		not-accessible	An entry in the lpE3CellStatsTable.
lpE3CellStatsTable	1.3.6.1.4.1.562.2.4.1.12.6.5.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpE3CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.6.11.1		not-accessible	An entry in the lpE3CidDataTable.
lpE3CidDataTable	1.3.6.1.4.1.562.2.4.1.12.6.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpE3G832	1.3.6.1.4.1.562.2.4.1.12.6.3
lpE3G832OperationalEntry	1.3.6.1.4.1.562.2.4.1.12.6.3.11.1		not-accessible	An entry in the lpE3G832OperationalTable.
lpE3G832OperationalTable	1.3.6.1.4.1.562.2.4.1.12.6.3.11		not-accessible	This group contains the operational data for the G832 component.
lpE3G832ProvisionedEntry	1.3.6.1.4.1.562.2.4.1.12.6.3.10.1		not-accessible	An entry in the lpE3G832ProvisionedTable.
lpE3G832ProvisionedTable	1.3.6.1.4.1.562.2.4.1.12.6.3.10		not-accessible	This group contains the provisionable data for the G832 component.
lpE3G832RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.6.3.1.1		not-accessible	A single entry in the table represents a single lpE3G832 component.
lpE3G832RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.6.3.1		not-accessible	This entry controls the addition and deletion of lpE3G832 components.
lpE3G832StatsEntry	1.3.6.1.4.1.562.2.4.1.12.6.3.12.1		not-accessible	An entry in the lpE3G832StatsTable.
lpE3G832StatsTable	1.3.6.1.4.1.562.2.4.1.12.6.3.12		not-accessible	This group contains the statistical data for the G832 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpE3IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.6.13.1		not-accessible	An entry in the lpE3IfEntryTable.
lpE3IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.6.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpE3OperEntry	1.3.6.1.4.1.562.2.4.1.12.6.16.1		not-accessible	An entry in the lpE3OperTable.
lpE3OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.6.14.1		not-accessible	An entry in the lpE3OperStatusTable.
lpE3OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.6.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpE3OperTable	1.3.6.1.4.1.562.2.4.1.12.6.16		not-accessible	This group contains the common operational data for E3 component.
lpE3Plcp	1.3.6.1.4.1.562.2.4.1.12.6.4
lpE3PlcpOperationalEntry	1.3.6.1.4.1.562.2.4.1.12.6.4.10.1		not-accessible	An entry in the lpE3PlcpOperationalTable.
lpE3PlcpOperationalTable	1.3.6.1.4.1.562.2.4.1.12.6.4.10		not-accessible	This group contains the operational data for the PLCP component.
lpE3PlcpRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.6.4.1.1		not-accessible	A single entry in the table represents a single lpE3Plcp component.
lpE3PlcpRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.6.4.1		not-accessible	This entry controls the addition and deletion of lpE3Plcp components.
lpE3PlcpStatsEntry	1.3.6.1.4.1.562.2.4.1.12.6.4.11.1		not-accessible	An entry in the lpE3PlcpStatsTable.
lpE3PlcpStatsTable	1.3.6.1.4.1.562.2.4.1.12.6.4.11		not-accessible	This group contains the statistical data for the PLCP component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpE3ProvEntry	1.3.6.1.4.1.562.2.4.1.12.6.10.1		not-accessible	An entry in the lpE3ProvTable.
lpE3ProvTable	1.3.6.1.4.1.562.2.4.1.12.6.10		not-accessible	This group contains all of the provisioning data for a E3 component.
lpE3RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.6.1.1		not-accessible	A single entry in the table represents a single lpE3 component.
lpE3RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.6.1		not-accessible	This entry controls the addition and deletion of lpE3 components.
lpE3StateEntry	1.3.6.1.4.1.562.2.4.1.12.6.15.1		not-accessible	An entry in the lpE3StateTable.
lpE3StateTable	1.3.6.1.4.1.562.2.4.1.12.6.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpE3StatsEntry	1.3.6.1.4.1.562.2.4.1.12.6.17.1		not-accessible	An entry in the lpE3StatsTable.
lpE3StatsTable	1.3.6.1.4.1.562.2.4.1.12.6.17		not-accessible	This group contains the common operational data for E3 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpE3Test	1.3.6.1.4.1.562.2.4.1.12.6.2
lpE3TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.6.2.12.1		not-accessible	An entry in the lpE3TestResultsTable.
lpE3TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.6.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpE3TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.6.2.1.1		not-accessible	A single entry in the table represents a single lpE3Test component.
lpE3TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.6.2.1		not-accessible	This entry controls the addition and deletion of lpE3Test components.
lpE3TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.6.2.11.1		not-accessible	An entry in the lpE3TestSetupTable.
lpE3TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.6.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpE3TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.6.2.10.1		not-accessible	An entry in the lpE3TestStateTable.
lpE3TestStateTable	1.3.6.1.4.1.562.2.4.1.12.6.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpEng	1.3.6.1.4.1.562.2.4.1.12.23
lpEngDs	1.3.6.1.4.1.562.2.4.1.12.23.2
lpEngDsOperEntry	1.3.6.1.4.1.562.2.4.1.12.23.2.10.1		not-accessible	An entry in the lpEngDsOperTable.
lpEngDsOperTable	1.3.6.1.4.1.562.2.4.1.12.23.2.10		not-accessible	This group contains operational attributes for the DataStream components under Lp Engineering.
lpEngDsOv	1.3.6.1.4.1.562.2.4.1.12.23.2.2
lpEngDsOvProvEntry	1.3.6.1.4.1.562.2.4.1.12.23.2.2.10.1		not-accessible	An entry in the lpEngDsOvProvTable.
lpEngDsOvProvTable	1.3.6.1.4.1.562.2.4.1.12.23.2.2.10		not-accessible	This group contains provisionable attributes for the DataStream Ov components under Lp Engineering. DESCRIPTION
lpEngDsOvRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1		not-accessible	A single entry in the table represents a single lpEngDsOv component.
lpEngDsOvRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.23.2.2.1		not-accessible	This entry controls the addition and deletion of lpEngDsOv components.
lpEngDsRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.23.2.1.1		not-accessible	A single entry in the table represents a single lpEngDs component.
lpEngDsRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.23.2.1		not-accessible	This entry controls the addition and deletion of lpEngDs components.
lpEngRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.23.1.1		not-accessible	A single entry in the table represents a single lpEng component.
lpEngRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.23.1		not-accessible	This entry controls the addition and deletion of lpEng components.
lpHssi	1.3.6.1.4.1.562.2.4.1.12.17
lpHssiAdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.17.12.1		not-accessible	An entry in the lpHssiAdminInfoTable.
lpHssiAdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.17.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpHssiCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.17.11.1		not-accessible	An entry in the lpHssiCidDataTable.
lpHssiCidDataTable	1.3.6.1.4.1.562.2.4.1.12.17.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpHssiIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.17.13.1		not-accessible	An entry in the lpHssiIfEntryTable.
lpHssiIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.17.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpHssiOperEntry	1.3.6.1.4.1.562.2.4.1.12.17.16.1		not-accessible	An entry in the lpHssiOperTable.
lpHssiOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.17.14.1		not-accessible	An entry in the lpHssiOperStatusTable.
lpHssiOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.17.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpHssiOperTable	1.3.6.1.4.1.562.2.4.1.12.17.16		not-accessible	This group contains all specific operational data for a Hssi component.
lpHssiProvEntry	1.3.6.1.4.1.562.2.4.1.12.17.10.1		not-accessible	An entry in the lpHssiProvTable.
lpHssiProvTable	1.3.6.1.4.1.562.2.4.1.12.17.10		not-accessible	This group contains the specific provisioning data for a Hssi component.
lpHssiRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.17.1.1		not-accessible	A single entry in the table represents a single lpHssi component.
lpHssiRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.17.1		not-accessible	This entry controls the addition and deletion of lpHssi components.
lpHssiStateEntry	1.3.6.1.4.1.562.2.4.1.12.17.15.1		not-accessible	An entry in the lpHssiStateTable.
lpHssiStateTable	1.3.6.1.4.1.562.2.4.1.12.17.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpHssiTest	1.3.6.1.4.1.562.2.4.1.12.17.2
lpHssiTestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.17.2.12.1		not-accessible	An entry in the lpHssiTestResultsTable.
lpHssiTestResultsTable	1.3.6.1.4.1.562.2.4.1.12.17.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpHssiTestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.17.2.1.1		not-accessible	A single entry in the table represents a single lpHssiTest component.
lpHssiTestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.17.2.1		not-accessible	This entry controls the addition and deletion of lpHssiTest components.
lpHssiTestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.17.2.11.1		not-accessible	An entry in the lpHssiTestSetupTable.
lpHssiTestSetupTable	1.3.6.1.4.1.562.2.4.1.12.17.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpHssiTestStateEntry	1.3.6.1.4.1.562.2.4.1.12.17.2.10.1		not-accessible	An entry in the lpHssiTestStateTable.
lpHssiTestStateTable	1.3.6.1.4.1.562.2.4.1.12.17.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpJT2	1.3.6.1.4.1.562.2.4.1.12.16
lpJT2AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.16.17.1		not-accessible	An entry in the lpJT2AdminInfoTable.
lpJT2AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.16.17		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpJT2Cell	1.3.6.1.4.1.562.2.4.1.12.16.3
lpJT2CellOperEntry	1.3.6.1.4.1.562.2.4.1.12.16.3.11.1		not-accessible	An entry in the lpJT2CellOperTable.
lpJT2CellOperTable	1.3.6.1.4.1.562.2.4.1.12.16.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpJT2CellProvEntry	1.3.6.1.4.1.562.2.4.1.12.16.3.10.1		not-accessible	An entry in the lpJT2CellProvTable.
lpJT2CellProvTable	1.3.6.1.4.1.562.2.4.1.12.16.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
lpJT2CellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.16.3.1.1		not-accessible	A single entry in the table represents a single lpJT2Cell component.
lpJT2CellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.16.3.1		not-accessible	This entry controls the addition and deletion of lpJT2Cell components.
lpJT2CellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.16.3.12.1		not-accessible	An entry in the lpJT2CellStatsTable.
lpJT2CellStatsTable	1.3.6.1.4.1.562.2.4.1.12.16.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpJT2CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.16.10.1		not-accessible	An entry in the lpJT2CidDataTable.
lpJT2CidDataTable	1.3.6.1.4.1.562.2.4.1.12.16.10		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpJT2IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.16.12.1		not-accessible	An entry in the lpJT2IfEntryTable.
lpJT2IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.16.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpJT2OperEntry	1.3.6.1.4.1.562.2.4.1.12.16.15.1		not-accessible	An entry in the lpJT2OperTable.
lpJT2OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.16.13.1		not-accessible	An entry in the lpJT2OperStatusTable.
lpJT2OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.16.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpJT2OperTable	1.3.6.1.4.1.562.2.4.1.12.16.15		not-accessible	This group contains the JT2 specific operational data for a JT2 component in a digital hierarchy interface.
lpJT2ProvEntry	1.3.6.1.4.1.562.2.4.1.12.16.11.1		not-accessible	An entry in the lpJT2ProvTable.
lpJT2ProvTable	1.3.6.1.4.1.562.2.4.1.12.16.11		not-accessible	This group contains all of the JT2 specific provisioning data for a JT2 component.
lpJT2RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.16.1.1		not-accessible	A single entry in the table represents a single lpJT2 component.
lpJT2RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.16.1		not-accessible	This entry controls the addition and deletion of lpJT2 components.
lpJT2StateEntry	1.3.6.1.4.1.562.2.4.1.12.16.14.1		not-accessible	An entry in the lpJT2StateTable.
lpJT2StateTable	1.3.6.1.4.1.562.2.4.1.12.16.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpJT2StatsEntry	1.3.6.1.4.1.562.2.4.1.12.16.16.1		not-accessible	An entry in the lpJT2StatsTable.
lpJT2StatsTable	1.3.6.1.4.1.562.2.4.1.12.16.16		not-accessible	This group contains the statistical data for a JT2 component in a digital hierarchy interface.
lpJT2Test	1.3.6.1.4.1.562.2.4.1.12.16.2
lpJT2TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.16.2.12.1		not-accessible	An entry in the lpJT2TestResultsTable.
lpJT2TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.16.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpJT2TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.16.2.1.1		not-accessible	A single entry in the table represents a single lpJT2Test component.
lpJT2TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.16.2.1		not-accessible	This entry controls the addition and deletion of lpJT2Test components.
lpJT2TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.16.2.11.1		not-accessible	An entry in the lpJT2TestSetupTable.
lpJT2TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.16.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpJT2TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.16.2.10.1		not-accessible	An entry in the lpJT2TestStateTable.
lpJT2TestStateTable	1.3.6.1.4.1.562.2.4.1.12.16.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpLinkToApplicationsEntry	1.3.6.1.4.1.562.2.4.1.12.242.1		not-accessible	An entry in the lpLinkToApplicationsTable.
lpLinkToApplicationsTable	1.3.6.1.4.1.562.2.4.1.12.242		not-accessible	This attribute allows applications to link themselves directly to the LP component.
lpMemoryCapacityEntry	1.3.6.1.4.1.562.2.4.1.12.244.1		not-accessible	An entry in the lpMemoryCapacityTable.
lpMemoryCapacityTable	1.3.6.1.4.1.562.2.4.1.12.244		not-accessible	This attribute indicates the processor card's memory capacity (in kilobytes) for each type of memory.
lpMemoryUsageAvgEntry	1.3.6.1.4.1.562.2.4.1.12.276.1		not-accessible	An entry in the lpMemoryUsageAvgTable.
lpMemoryUsageAvgMaxEntry	1.3.6.1.4.1.562.2.4.1.12.278.1		not-accessible	An entry in the lpMemoryUsageAvgMaxTable.
lpMemoryUsageAvgMaxTable	1.3.6.1.4.1.562.2.4.1.12.278		not-accessible	This attribute indicates the processor's maximum memory utilization (in kilobytes) for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
lpMemoryUsageAvgMinEntry	1.3.6.1.4.1.562.2.4.1.12.277.1		not-accessible	An entry in the lpMemoryUsageAvgMinTable.
lpMemoryUsageAvgMinTable	1.3.6.1.4.1.562.2.4.1.12.277		not-accessible	This attribute indicates the processor's minimum memory utilization (in kilobytes) for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
lpMemoryUsageAvgTable	1.3.6.1.4.1.562.2.4.1.12.276		not-accessible	This attribute indicates the processor's average memory utilization (in kilobytes) for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
lpMemoryUsageEntry	1.3.6.1.4.1.562.2.4.1.12.245.1		not-accessible	An entry in the lpMemoryUsageTable.
lpMemoryUsageTable	1.3.6.1.4.1.562.2.4.1.12.245		not-accessible	This attribute indicates the processor's current memory utilization (in kilobytes) for each type of memory.
lpOperEntry	1.3.6.1.4.1.562.2.4.1.12.103.1		not-accessible	An entry in the lpOperTable.
lpOperTable	1.3.6.1.4.1.562.2.4.1.12.103		not-accessible	This Group contains the operational attributes for the LP component.
lpProvEntry	1.3.6.1.4.1.562.2.4.1.12.100.1		not-accessible	An entry in the lpProvTable.
lpProvTable	1.3.6.1.4.1.562.2.4.1.12.100		not-accessible	This Group contains the provisionable attributes for the LP component.
lpRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.1.1		not-accessible	A single entry in the table represents a single lp component.
lpRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.1		not-accessible	This entry controls the addition and deletion of lp components.
lpSdh	1.3.6.1.4.1.562.2.4.1.12.15
lpSdhAdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.15.12.1		not-accessible	An entry in the lpSdhAdminInfoTable.
lpSdhAdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.15.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpSdhCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.15.11.1		not-accessible	An entry in the lpSdhCidDataTable.
lpSdhCidDataTable	1.3.6.1.4.1.562.2.4.1.12.15.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpSdhIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.15.13.1		not-accessible	An entry in the lpSdhIfEntryTable.
lpSdhIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.15.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpSdhOperEntry	1.3.6.1.4.1.562.2.4.1.12.15.16.1		not-accessible	An entry in the lpSdhOperTable.
lpSdhOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.15.14.1		not-accessible	An entry in the lpSdhOperStatusTable.
lpSdhOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.15.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpSdhOperTable	1.3.6.1.4.1.562.2.4.1.12.15.16		not-accessible	This group contains the common operational data for Sonet or Sdh component.
lpSdhPath	1.3.6.1.4.1.562.2.4.1.12.15.2
lpSdhPathCell	1.3.6.1.4.1.562.2.4.1.12.15.2.2
lpSdhPathCellOperEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.2.11.1		not-accessible	An entry in the lpSdhPathCellOperTable.
lpSdhPathCellOperTable	1.3.6.1.4.1.562.2.4.1.12.15.2.2.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpSdhPathCellProvEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.2.10.1		not-accessible	An entry in the lpSdhPathCellProvTable.
lpSdhPathCellProvTable	1.3.6.1.4.1.562.2.4.1.12.15.2.2.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
lpSdhPathCellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1		not-accessible	A single entry in the table represents a single lpSdhPathCell component.
lpSdhPathCellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.15.2.2.1		not-accessible	This entry controls the addition and deletion of lpSdhPathCell components.
lpSdhPathCellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1		not-accessible	An entry in the lpSdhPathCellStatsTable.
lpSdhPathCellStatsTable	1.3.6.1.4.1.562.2.4.1.12.15.2.2.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpSdhPathCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.11.1		not-accessible	An entry in the lpSdhPathCidDataTable.
lpSdhPathCidDataTable	1.3.6.1.4.1.562.2.4.1.12.15.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpSdhPathIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.13.1		not-accessible	An entry in the lpSdhPathIfEntryTable.
lpSdhPathIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.15.2.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpSdhPathOperEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.15.1		not-accessible	An entry in the lpSdhPathOperTable.
lpSdhPathOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.14.1		not-accessible	An entry in the lpSdhPathOperStatusTable.
lpSdhPathOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.15.2.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpSdhPathOperTable	1.3.6.1.4.1.562.2.4.1.12.15.2.15		not-accessible	This group contains the common operational data for Path component.
lpSdhPathProvEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.10.1		not-accessible	An entry in the lpSdhPathProvTable.
lpSdhPathProvTable	1.3.6.1.4.1.562.2.4.1.12.15.2.10		not-accessible	This group contains all of the provisioning data for a Sonet/Sdh Path component.
lpSdhPathRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.1.1		not-accessible	A single entry in the table represents a single lpSdhPath component.
lpSdhPathRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.15.2.1		not-accessible	This entry controls the addition and deletion of lpSdhPath components.
lpSdhPathStateEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.12.1		not-accessible	An entry in the lpSdhPathStateTable.
lpSdhPathStateTable	1.3.6.1.4.1.562.2.4.1.12.15.2.12		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpSdhPathStatsEntry	1.3.6.1.4.1.562.2.4.1.12.15.2.16.1		not-accessible	An entry in the lpSdhPathStatsTable.
lpSdhPathStatsTable	1.3.6.1.4.1.562.2.4.1.12.15.2.16		not-accessible	This group contains the statistics data for a Sonet/Sdh Path component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpSdhProvEntry	1.3.6.1.4.1.562.2.4.1.12.15.10.1		not-accessible	An entry in the lpSdhProvTable.
lpSdhProvTable	1.3.6.1.4.1.562.2.4.1.12.15.10		not-accessible	This group contains all of the provisioning data for a Sonet or Sdh component.
lpSdhRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.15.1.1		not-accessible	A single entry in the table represents a single lpSdh component.
lpSdhRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.15.1		not-accessible	This entry controls the addition and deletion of lpSdh components.
lpSdhStateEntry	1.3.6.1.4.1.562.2.4.1.12.15.15.1		not-accessible	An entry in the lpSdhStateTable.
lpSdhStateTable	1.3.6.1.4.1.562.2.4.1.12.15.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpSdhStatsEntry	1.3.6.1.4.1.562.2.4.1.12.15.17.1		not-accessible	An entry in the lpSdhStatsTable.
lpSdhStatsTable	1.3.6.1.4.1.562.2.4.1.12.15.17		not-accessible	This group contains the statistics data for a Sonet or Sdh component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpSdhTest	1.3.6.1.4.1.562.2.4.1.12.15.3
lpSdhTestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.15.3.12.1		not-accessible	An entry in the lpSdhTestResultsTable.
lpSdhTestResultsTable	1.3.6.1.4.1.562.2.4.1.12.15.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpSdhTestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.15.3.1.1		not-accessible	A single entry in the table represents a single lpSdhTest component.
lpSdhTestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.15.3.1		not-accessible	This entry controls the addition and deletion of lpSdhTest components.
lpSdhTestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.15.3.11.1		not-accessible	An entry in the lpSdhTestSetupTable.
lpSdhTestSetupTable	1.3.6.1.4.1.562.2.4.1.12.15.3.11		not-accessible	This group contains all of the operational data for a Test component.
lpSdhTestStateEntry	1.3.6.1.4.1.562.2.4.1.12.15.3.10.1		not-accessible	An entry in the lpSdhTestStateTable.
lpSdhTestStateTable	1.3.6.1.4.1.562.2.4.1.12.15.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpSonet	1.3.6.1.4.1.562.2.4.1.12.14
lpSonetAdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.14.12.1		not-accessible	An entry in the lpSonetAdminInfoTable.
lpSonetAdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.14.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpSonetCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.14.11.1		not-accessible	An entry in the lpSonetCidDataTable.
lpSonetCidDataTable	1.3.6.1.4.1.562.2.4.1.12.14.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpSonetIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.14.13.1		not-accessible	An entry in the lpSonetIfEntryTable.
lpSonetIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.14.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpSonetOperEntry	1.3.6.1.4.1.562.2.4.1.12.14.16.1		not-accessible	An entry in the lpSonetOperTable.
lpSonetOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.14.14.1		not-accessible	An entry in the lpSonetOperStatusTable.
lpSonetOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.14.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpSonetOperTable	1.3.6.1.4.1.562.2.4.1.12.14.16		not-accessible	This group contains the common operational data for Sonet or Sdh component.
lpSonetPath	1.3.6.1.4.1.562.2.4.1.12.14.2
lpSonetPathCell	1.3.6.1.4.1.562.2.4.1.12.14.2.2
lpSonetPathCellOperEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.2.11.1		not-accessible	An entry in the lpSonetPathCellOperTable.
lpSonetPathCellOperTable	1.3.6.1.4.1.562.2.4.1.12.14.2.2.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
lpSonetPathCellProvEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.2.10.1		not-accessible	An entry in the lpSonetPathCellProvTable.
lpSonetPathCellProvTable	1.3.6.1.4.1.562.2.4.1.12.14.2.2.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
lpSonetPathCellRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1		not-accessible	A single entry in the table represents a single lpSonetPathCell component.
lpSonetPathCellRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.14.2.2.1		not-accessible	This entry controls the addition and deletion of lpSonetPathCell components.
lpSonetPathCellStatsEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1		not-accessible	An entry in the lpSonetPathCellStatsTable.
lpSonetPathCellStatsTable	1.3.6.1.4.1.562.2.4.1.12.14.2.2.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpSonetPathCidDataEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.11.1		not-accessible	An entry in the lpSonetPathCidDataTable.
lpSonetPathCidDataTable	1.3.6.1.4.1.562.2.4.1.12.14.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpSonetPathIfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.13.1		not-accessible	An entry in the lpSonetPathIfEntryTable.
lpSonetPathIfEntryTable	1.3.6.1.4.1.562.2.4.1.12.14.2.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpSonetPathOperEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.15.1		not-accessible	An entry in the lpSonetPathOperTable.
lpSonetPathOperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.14.1		not-accessible	An entry in the lpSonetPathOperStatusTable.
lpSonetPathOperStatusTable	1.3.6.1.4.1.562.2.4.1.12.14.2.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpSonetPathOperTable	1.3.6.1.4.1.562.2.4.1.12.14.2.15		not-accessible	This group contains the common operational data for Path component.
lpSonetPathProvEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.10.1		not-accessible	An entry in the lpSonetPathProvTable.
lpSonetPathProvTable	1.3.6.1.4.1.562.2.4.1.12.14.2.10		not-accessible	This group contains all of the provisioning data for a Sonet/Sdh Path component.
lpSonetPathRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.1.1		not-accessible	A single entry in the table represents a single lpSonetPath component.
lpSonetPathRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.14.2.1		not-accessible	This entry controls the addition and deletion of lpSonetPath components.
lpSonetPathStateEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.12.1		not-accessible	An entry in the lpSonetPathStateTable.
lpSonetPathStateTable	1.3.6.1.4.1.562.2.4.1.12.14.2.12		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpSonetPathStatsEntry	1.3.6.1.4.1.562.2.4.1.12.14.2.16.1		not-accessible	An entry in the lpSonetPathStatsTable.
lpSonetPathStatsTable	1.3.6.1.4.1.562.2.4.1.12.14.2.16		not-accessible	This group contains the statistics data for a Sonet/Sdh Path component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpSonetProvEntry	1.3.6.1.4.1.562.2.4.1.12.14.10.1		not-accessible	An entry in the lpSonetProvTable.
lpSonetProvTable	1.3.6.1.4.1.562.2.4.1.12.14.10		not-accessible	This group contains all of the provisioning data for a Sonet or Sdh component.
lpSonetRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.14.1.1		not-accessible	A single entry in the table represents a single lpSonet component.
lpSonetRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.14.1		not-accessible	This entry controls the addition and deletion of lpSonet components.
lpSonetStateEntry	1.3.6.1.4.1.562.2.4.1.12.14.15.1		not-accessible	An entry in the lpSonetStateTable.
lpSonetStateTable	1.3.6.1.4.1.562.2.4.1.12.14.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpSonetStatsEntry	1.3.6.1.4.1.562.2.4.1.12.14.17.1		not-accessible	An entry in the lpSonetStatsTable.
lpSonetStatsTable	1.3.6.1.4.1.562.2.4.1.12.14.17		not-accessible	This group contains the statistics data for a Sonet or Sdh component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
lpSonetTest	1.3.6.1.4.1.562.2.4.1.12.14.3
lpSonetTestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.14.3.12.1		not-accessible	An entry in the lpSonetTestResultsTable.
lpSonetTestResultsTable	1.3.6.1.4.1.562.2.4.1.12.14.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpSonetTestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.14.3.1.1		not-accessible	A single entry in the table represents a single lpSonetTest component.
lpSonetTestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.14.3.1		not-accessible	This entry controls the addition and deletion of lpSonetTest components.
lpSonetTestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.14.3.11.1		not-accessible	An entry in the lpSonetTestSetupTable.
lpSonetTestSetupTable	1.3.6.1.4.1.562.2.4.1.12.14.3.11		not-accessible	This group contains all of the operational data for a Test component.
lpSonetTestStateEntry	1.3.6.1.4.1.562.2.4.1.12.14.3.10.1		not-accessible	An entry in the lpSonetTestStateTable.
lpSonetTestStateTable	1.3.6.1.4.1.562.2.4.1.12.14.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpStateEntry	1.3.6.1.4.1.562.2.4.1.12.102.1		not-accessible	An entry in the lpStateTable.
lpStateTable	1.3.6.1.4.1.562.2.4.1.12.102		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpUtilEntry	1.3.6.1.4.1.562.2.4.1.12.104.1		not-accessible	An entry in the lpUtilTable.
lpUtilTable	1.3.6.1.4.1.562.2.4.1.12.104		not-accessible	This group contains the operational attributes that specify the processor's utilization levels. When this group exists for an LP component, the attributes are representative of the active card.
lpV35	1.3.6.1.4.1.562.2.4.1.12.9
lpV35AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.9.12.1		not-accessible	An entry in the lpV35AdminInfoTable.
lpV35AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.9.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpV35CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.9.11.1		not-accessible	An entry in the lpV35CidDataTable.
lpV35CidDataTable	1.3.6.1.4.1.562.2.4.1.12.9.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpV35IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.9.13.1		not-accessible	An entry in the lpV35IfEntryTable.
lpV35IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.9.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpV35OperEntry	1.3.6.1.4.1.562.2.4.1.12.9.16.1		not-accessible	An entry in the lpV35OperTable.
lpV35OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.9.14.1		not-accessible	An entry in the lpV35OperStatusTable.
lpV35OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.9.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpV35OperTable	1.3.6.1.4.1.562.2.4.1.12.9.16		not-accessible	This group contains all specific operational data for a V35 component.
lpV35ProvEntry	1.3.6.1.4.1.562.2.4.1.12.9.10.1		not-accessible	An entry in the lpV35ProvTable.
lpV35ProvTable	1.3.6.1.4.1.562.2.4.1.12.9.10		not-accessible	This group contains all specific provisioning data for a V35 component.
lpV35RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.9.1.1		not-accessible	A single entry in the table represents a single lpV35 component.
lpV35RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.9.1		not-accessible	This entry controls the addition and deletion of lpV35 components.
lpV35StateEntry	1.3.6.1.4.1.562.2.4.1.12.9.15.1		not-accessible	An entry in the lpV35StateTable.
lpV35StateTable	1.3.6.1.4.1.562.2.4.1.12.9.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpV35Test	1.3.6.1.4.1.562.2.4.1.12.9.2
lpV35TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.9.2.12.1		not-accessible	An entry in the lpV35TestResultsTable.
lpV35TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.9.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpV35TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.9.2.1.1		not-accessible	A single entry in the table represents a single lpV35Test component.
lpV35TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.9.2.1		not-accessible	This entry controls the addition and deletion of lpV35Test components.
lpV35TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.9.2.11.1		not-accessible	An entry in the lpV35TestSetupTable.
lpV35TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.9.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpV35TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.9.2.10.1		not-accessible	An entry in the lpV35TestStateTable.
lpV35TestStateTable	1.3.6.1.4.1.562.2.4.1.12.9.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
lpX21	1.3.6.1.4.1.562.2.4.1.12.10
lpX21AdminInfoEntry	1.3.6.1.4.1.562.2.4.1.12.10.12.1		not-accessible	An entry in the lpX21AdminInfoTable.
lpX21AdminInfoTable	1.3.6.1.4.1.562.2.4.1.12.10.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
lpX21CidDataEntry	1.3.6.1.4.1.562.2.4.1.12.10.11.1		not-accessible	An entry in the lpX21CidDataTable.
lpX21CidDataTable	1.3.6.1.4.1.562.2.4.1.12.10.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
lpX21IfEntryEntry	1.3.6.1.4.1.562.2.4.1.12.10.13.1		not-accessible	An entry in the lpX21IfEntryTable.
lpX21IfEntryTable	1.3.6.1.4.1.562.2.4.1.12.10.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
lpX21OperEntry	1.3.6.1.4.1.562.2.4.1.12.10.16.1		not-accessible	An entry in the lpX21OperTable.
lpX21OperStatusEntry	1.3.6.1.4.1.562.2.4.1.12.10.14.1		not-accessible	An entry in the lpX21OperStatusTable.
lpX21OperStatusTable	1.3.6.1.4.1.562.2.4.1.12.10.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
lpX21OperTable	1.3.6.1.4.1.562.2.4.1.12.10.16		not-accessible	This group contains all specific operational data for an X21 component.
lpX21ProvEntry	1.3.6.1.4.1.562.2.4.1.12.10.10.1		not-accessible	An entry in the lpX21ProvTable.
lpX21ProvTable	1.3.6.1.4.1.562.2.4.1.12.10.10		not-accessible	This group contains all specific provisioning data for an X21 component.
lpX21RowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.10.1.1		not-accessible	A single entry in the table represents a single lpX21 component.
lpX21RowStatusTable	1.3.6.1.4.1.562.2.4.1.12.10.1		not-accessible	This entry controls the addition and deletion of lpX21 components.
lpX21StateEntry	1.3.6.1.4.1.562.2.4.1.12.10.15.1		not-accessible	An entry in the lpX21StateTable.
lpX21StateTable	1.3.6.1.4.1.562.2.4.1.12.10.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
lpX21Test	1.3.6.1.4.1.562.2.4.1.12.10.2
lpX21TestResultsEntry	1.3.6.1.4.1.562.2.4.1.12.10.2.12.1		not-accessible	An entry in the lpX21TestResultsTable.
lpX21TestResultsTable	1.3.6.1.4.1.562.2.4.1.12.10.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
lpX21TestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.12.10.2.1.1		not-accessible	A single entry in the table represents a single lpX21Test component.
lpX21TestRowStatusTable	1.3.6.1.4.1.562.2.4.1.12.10.2.1		not-accessible	This entry controls the addition and deletion of lpX21Test components.
lpX21TestSetupEntry	1.3.6.1.4.1.562.2.4.1.12.10.2.11.1		not-accessible	An entry in the lpX21TestSetupTable.
lpX21TestSetupTable	1.3.6.1.4.1.562.2.4.1.12.10.2.11		not-accessible	This group contains all of the operational data for a Test component.
lpX21TestStateEntry	1.3.6.1.4.1.562.2.4.1.12.10.2.10.1		not-accessible	An entry in the lpX21TestStateTable.
lpX21TestStateTable	1.3.6.1.4.1.562.2.4.1.12.10.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.

RFC description

Nortel Magellan Passport logical processor management; vendor-private objects for managing logical processors and compute resources in Nortel switching fabric.

Start monitoring Nortel Magellan Passport multiservice WAN switch (logical processor resources) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Nortel-Magellan-Passport-LogicalProcessorMIB

This MIB depends on

Related MIBs

What Is Nortel-Magellan-Passport-LogicalProcessorMIB?

What Can Be Monitored

Supported Devices

Monitoring Examples

RFC description